Suncorp XVP5601, XVP5602, XV6602 Product Manual

Product Definition Document SunCorp Communications (Europe) Ltd.

Product Definition Document

Version 2.0

Customer: XACT / US
Model: XVP5601
Roadmap Number: 33-3
Cabinet Reference: B18 + B32

PD374

x

FCC Interference Information

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1)This device may not cause harmful interference; and (2) This device must

accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio com-

munications. However, there is no guarantee that interference will not occur in a particular

installation.

If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna (that is, the antenna for radio or television that

is “receiving” the interference.

• Reorient or relocate and increase the separation between the telecommunications equip-

ment and receiving antenna.

• Connect the telecommunications equipment into an outlet on a circuit different from that

to which the receiving antenna is connected.

FCC INTERFERENCE INFORMATION

FCC RF Radiation Exposure Statement

The installation of the base unit should allow at least 20 centimeter between the base and

persons in compliance with FCC RF exposure guidelines. For body worn operation, the

portable part (handset) has been tested and meets FCC RF exposure guidelines.

This device must not be co-located or operating in conjunction with any other antenna or

transmitter.The changes or modifications not expressly approved by the party responsible for

compliance could void user’s authority to operate the equipment.

FCC Part 15.19

FCC Part 15.21

FCC Part 15.105(b)

FCC Part 2.1091

FCC Part 2.1093

This product meets the applicable Industry Canada technical specifications
The Ringer Equivalence Number is an indication of the maximum number of devices allowed to be
connected to a telephone interface. The termination on an interface may consist of any combination
of devices subject only to the requirement that the sum of the RENs of all the devices does not
exceed five

Operation is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.

Product Definition Document SunCorp Communications (Europe) Ltd.

2 Panel Layout

2.1 Handset Front

1 4096 Colour; Full Graphic (1.4 inch), 128 x 128 pixels LCD
2 Soft Key 1
3 VoIP Talk On / Handsfree (toggle between handset and handsfree mode)
4 Enter Buddy List / Volume Down
5 Intercom
6 Clear / Back
7 # / Switch between Lowercase and Uppercase
8 VoIP Talk Off
9 Enter Redial List / Pause / Volume Up

10 Soft Key 2

PD374

8

Product Definition Document SunCorp Communications (Europe) Ltd.

2.2 Black Box

1 USB Connector Port
2 Power / In Use / Event Indicator LED
3 Page Key

PD374

9

Product Definition Document SunCorp Communications (Europe) Ltd.

2.3 Charger Front

1 Power / In Use / Event Indicator LED

PD374

10