Sunbeam 4026-2, Steam Valet 4026-2 Instructions Manual
NOTE: The appliance can be
used on virtually all articles
of clothing and fabrics in the
home. Fabrics containing
acrylics, nylon or similar
materials may not be treated.
If you have any doubts. we
recommend that you test the
appliance on the inside fabric
of the garment. With delicate
materials. such as silk or velvet, remove the clothes brush
and’steam the material from
a distance.
CARE OF CLOTHES
Hang the creased article of
clothing on a clothes hanger.
Pull the clothing tight with
one hand, place the appliance over the creased area.
Gently press the appliance
against the clothing. and
press and release the Shot of
Steam@
button. In this way,
steam will penetrate right
into the fabric, and not just
pass over the surface. Now
move the appliance down
over the fabric. When doing
so, press the Shot of Steam”
button several times and at
the same time smooth the
material with the clothes
brush. After treatment, let the
article of clothing cool on the
hanger.
CARE OF CURTAINS
AND UPHOLSTERY
Creases C-I be removed from
curtains while they are hanging on the rod; slmply follow
the procedure described in
“Care of Clothes”. The appearance of upholstery can
also be improved by steaming with the appliance. If the
appliance is being used in a
horizontal position best
results are achieved by holding it upright occasionally.
REMOVAL OF
LINT AND FLUFF
Lint, threads, fluff and hair
can easily be removed with
the lint brush. It has a
reversible actlon for right or left.
handed use.
EMPTYING THE
WATER TANK
Remove the plug from the
electrical outlet and allow the
appliance to cool down. If
you do not intend to use the
appliance again soon, It is advisable to drain the water
from the tank.
STORAGE
The appliance may be stored
by means of the hanging loop
or placed on a clean, dry
shelf. When traveling it can
be packed into the travel
pouch provided.
MAINTENANCE
The body and front panel
(when cool) should occasionally be wiped with a
moist cloth.
SUNBEAM APPLIANCE COMPANY
a member company of (Al) Allegheny International
0 SUNBEAM
0 SUNBEAM APPLIANCE COMPANY, 1966 3633007624
“STEAM VALET”
GARMENT STEAMER
INSTRUCTIONS
IMPORTANT SAFEGUARDS
FEATURES OF YOUR
SUNBEAM GARMENT STEAMER
When using your garment steamer, basic safety precautions
should always be lollowed, including the following:
1. Read all instructions before using the garment steamer.
2. Use garment steamer only for its intended use.
3. To protect against a risk of electric shock, do not
immerse the garmenl steamer in water or other liquids
4. Never yank cord to disconnect from outlet; instead, grasp
plug and pull to disconnect.
5. Do not allow cord to touch hot surfaces. Loop cord loosely
around garment steamer when storlng.
6. Do not operate garment steamer with a damaged cord or if
the garment steamer has been dropped or damaged. To
avoid the risk
of
electric shock, do not disassemble the
garment steamer. Take it to the nearest Sunbeam
Appliance Service Company station or authorized
independent service station for examination and repair.
Incorrect reassembly can cause a risk of electric shock
when the garment steamer is used.
7. Close supervision is necessary for any appliance being
used by or near children. Do not leave garment steamer
unattended while connected.
6. Burns can occur from contact with hot water, or steam.
Use caution when you turn the garment steamer upside
down-there may be hot water in the reservoir.
9. The use of accessory attachments not recommended by
Sunbeam Appliance Company may result in fire, electric
shock or personal injury.
SAVE THESE INSTRUCTIONS
CAUTION: Never point garment steamer at another person
Unpack the appliance. Please read
the
instructions carefully
before use, and keep in a safe place
for
future reference.
Hanging
Water Tank
Release Button .
water Leve
. . .
indicator
Shot of Steam@
Butto
Body
Detachable Lint and
4
d
Vents
Detachable
Clothes Brush
REMOVING THE
WATER TANK .
Press the water tank release
button and pull the handle
and button assembly away
from the body of the steamer.
WATER
Tap water may be used, however, In areas of the country
where the water is very hard
we recommend the use of
demineralized or distilled
water lo prolong the steaming function of your ap
pliance. DO NOT use water
passed through home water
softening systems because
such water contains minerals
that may be harmful to the
garment steamer’s internal
components.
Insert the filled water lank
back Into the steamer assembly with the button projection
on the tank nesting into the
button slot on the steamer.
WATER LEVEL
INDICATOR
The water level indicator
shows at any time whether
there is sufficient water in the
lank. To check the reservoir
level, hold garment steamer
so that the waler window is
vertical. Check level and refill
as
necessary.
USING THE
GARMENT STEAMER
Plug the cord into a 120 volt,
AC electrical outlet. After
about 45 seconds It
will
reach
working temperature. A
jet
of
steam can then be produced
about every 2 seconds by
pressing the steam button.
Loading...