Sunbeam SC7500 User Manual

Eco Mop
Multipurpose Steam Cleaner
Instruction Booklet
SC7500
Please read these instructions carefully and retain for future reference.
Contents
Sunbeam’s Safety Precautions
Features of your Eco Mop
Attachments and Accessories
Using your Eco Mop
Care and Cleaning 1
3
4
6
7
0
Important instructions – retain for future use.
Safety Precautions for your Eco Mop
SAFETY PRECAUTIONS FOR YOUR
SUNBEAM ECO MOP.
• The Sunbeam Eco Mop is intended for domestic household use only.
• Only use the attachments supplied with the Eco Mop. Others may cause hazards.
• Always unplug the mop from the power outlet when filling with water.
• Do not add detergents, chemicals, aromatic products, or solutions of any kind when filling the mop with water as this may damage the mop or make it unsafe for use.
• The mop is switched on and heating once connected and turned on at the power outlet, even if the steam on/off switch is in the off position (
• Always use the tray when heating or cooling or at any time the mop is stationary for more than 10 seconds, to avoid damage to surfaces. Should calcification occur, the white ‘halo’ effect can be removed using a decalcifying product or with a few drops of vinegar applied directly to the area.
• Do not direct the steam jet toward people or pets as this could be harmful.
• Do not direct steam toward equipment containing electrical components, such as the interior of ovens. It could damage the equipment and may cause serious injury.
• The safety pressure valve will automatically activate if the steam pressure becomes too high in the steam chamber. This can be prevented by regular cleaning.
).
• Do not touch the lower part of the mop or the attachments when the mop has been in use as these parts will be hot. Allow to cool before handling.
• Care must be taken when cleaning polished wooden floor boards. Do not use the Eco Mop on any unsealed wooden flooring, including high traffic areas where the protective coating may be worn down, as the steam may penetrate and damage the wood. Steam may also affect flooring that has been treated with wax as it may be removed by the heat of the steam, leaving the surface dull. If unsure, spot test a small inconspicuous area before proceeding.
• Always check the manufacturer's care and cleaning instructions before using the Eco Mop to clean fabrics, soft furnishings and other surfaces, where possible.
• Do not use the utility head on any surface without a cloth fitted as it may damage or scratch the surface.
• Always ensure the mop is unplugged and completely cool before cleaning the steam chamber.
• Allow the mop to cool completely before storing.
2
2
Sunbeam’s Safety Precautions
Sunbeam are very safety conscious when
designing and manufacturing consumer products, but it is essential that the product user also exercise care when using an electrical appliance. Listed below are precautions which are essential for the safe use of an electrical appliance:
• Read carefully and save all the instructions provided with an appliance.
• Always turn the power off at the power outlet before you insert or remove a plug. Remove by grasping the plug - do not pull on the cord.
• Turn the power off and remove the plug when the appliance is not in use and before cleaning.
• Do not use your appliance with an extension cord unless this cord has been checked and tested by a qualified technician or service person.
• Always use your appliance from a power outlet of the voltage (A.C. only) marked on the appliance.
• Close supervision is necessary when your appliance is being used near children or infirm persons.
• Young children should be supervised to ensure that they do not play with the appliance.
• Never leave an appliance unattended while in use.
• Do not use an appliance for any purpose other than its intended use.
• Do not place an appliance on or near a hot gas flame, electric element or on a heated oven. Do not place on top of any other appliance.
• Do not let the power cord of an appliance hang over the edge of a table or bench top or touch any hot surface.
• Do not operate any electrical appliance with a damaged cord or after the appliance has been damaged in any manner. If damage is suspected, return the appliance to the nearest Sunbeam Appointed Service Centre for examination, repair or adjustment.
• For additional protection, Sunbeam recommend the use of a residual current device (RCD) with a tripping current not exceeding 30mA in the electrical circuit supplying power to your appliances.
• Do not immerse the appliance in water or any other liquid unless recommended.
If you have any concerns regarding the performance and use of your appliance,
please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.
Ensure the above safety precautions are understood.
3
Loading...
+ 11 hidden pages