Belle-Aqua
1 litre stainless steel kettle
Instruction Booklet
KE7110
Please read these instructions carefully
and retain for future reference.
Contents
Sunbeam’s Safety Precautions 1
™
Features of your Sunbeam Belle-Aqua
Using your Sunbeam Belle-Aqua
Sunbeam’s 3-Way Safety System 4
Care and Cleaning of your Sunbeam 4
Belle-Aqua
™
Kettle
Kettle 2
™
Kettle 3
Important instructions – retain for
future use.
Sunbeam’s Safety Precautions
SAFETY PRECAUTIONS FOR YOUR SUNBEAM
KETTLE.
• Always operate the kettle on a flat, level surface.
• Boiling water will scald. Do not leave a boiling or
hot kettle near or where children may touch it.
• Do not leave the power cord near the edge of a
bench top where children may touch or pull it.
• Boiling water may be ejected, if overfilled.
• Always ensure lid is securely closed to ensure
correct operation of the kettle.
• Do not operate the kettle without water.
• Always turn the power off and unplug the cord
while the kettle is NOT in use.
• Your kettle must only be used with the power base
supplied.
Sunbeam is very safety conscious when designing and
manufacturing consumer products, but it is essential
that the product user also exercise care when using
an electrical appliance. Listed below are precautions
which are essential for the safe use of an electrical
appliance:
• Read carefully and save all the instructions provided
with an appliance.
• Always turn the power off at the power outlet before
you insert or remove a plug. Remove by grasping the
plug - do not pull on the cord.
• Turn the power off and remove the plug when the
appliance is not in use and before cleaning.
• Do not use your appliance with an extension cord
unless this cord has been checked and tested by a
qualified technician or service person.
• Always use your appliance from a power outlet of the
voltage (A.C. only) marked on the appliance.
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
• Children should be supervised to ensure that they do
not play with the appliance.
• The temperature of accessible surfaces may be high
when the appliance is operating.
• Never leave an appliance unattended while in use.
If you have any concerns regarding the performance and use of your appliance,
please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.
Ensure the above safety precautions are understood.
• Do not move kettle while switched on.
• Never fill above the 'max' indication as hot water
may be ejected.
• Always store excess cord in the storage facility
underneath the power base.
• Always be aware of steam being emitted from the
spout or lid especially during refilling.
• Do not use the kettle to heat anything other than
water.
• Avoid spillage on the connector.
• Do not use an appliance for any purpose other
than its intended use.
• The heating element surface is subject to residual
heat after use.
• Do not use an appliance for any purpose other than
its intended use.
• Do not place an appliance on or near a hot gas
flame, electric element or on a heated oven.
• Do not place on top of any other appliance.
• Do not let the power cord of an appliance hang over
the edge of a table or bench top or touch any hot
surface.
• Do not operate any electrical appliance with a
damaged cord or after the appliance has been
damaged in any manner. If damage is suspected,
return the appliance to the nearest Sunbeam
Appointed Service Centre for examination, repair or
adjustment.
• For additional protection, Sunbeam recommend the
use of a residual current device (RCD) with a tripping
current not exceeding 30mA in the electrical circuit
supplying power to your appliances.
• Do not immerse the appliance in water or any other
liquid unless recommended.
• Appliances are not intended to be operated by means
of an external timer or separate remote control
system.
• This appliance is intended to be used in household
and similar applications such as: staff kitchen areas
in shops, offices and other working environments;
farm houses; by clients in hotels, motels and other
residential type environments; bed and breakfast
type environments.
1
Features of your Sunbeam
™
Belle-Aqua
Large spout
Enables quick and easy
filling at the tap, without
the need for removal of the
lid.
1850 watt concealed
element
The fast boil 1850 watt
element is concealed in
the base of the kettle for
longer element life. The
smooth stainless floor
reduces scale build up and
allows for easy cleaning.
Kettle
3-Way Safety System.
1 – Automatically switches the kettle off after boiling.
2 – Cuts out for boil-dry protection.
3 – Shuts down in case of overheating.
Lid release button
Simply pull the lid
release button to open
the lid.
ON/OFF switch with auto
cut-out on handle
Lights up to indicate
that the kettle is on and
heating. Switches the
kettle off automatically
after boiling.
Stylish brushed stainless
steel design
Long life stainless steel to
suit any kitchen décor.
360 degree cordless power
base
Designed to allow you to
place the kettle
on the base in any
direction.
2
Cord storage facility
Excess cord can be wound
around the cord storage
facility underneath the
power base.
Using your Sunbeam
™
Belle-Aqua
Kettle
Before using your kettle.
It is recommended that you clean your kettle
before first use by filling the kettle with
water, up to the maximum level indicator,
boil and discard.
Using your kettle.
1. To fill the kettle, remove it from the power
base and open the lid by pushing the
button on the top of the lid. Alternatively,
the kettle may be filled through the
pouring spout.
2. Fill the kettle with the desired amount of
water (minimum 1 cup/250ml). Always
fill the kettle between the minimum and
maximum marks. Too little water will result
in the kettle switching off before the water
has boiled.
Note: Do not fill the kettle over the maximum
level, as water may spill out of the spout
when boiling.
3. Push the lid closed firmly until it locks into
position.
4. Place the kettle on the power base and
connect the plug into a 230/240 Volt
AC power outlet. Turn the power ON.
5. Press the ON/OFF switch located on the
handle downwards. The light will illuminate
to indicate the kettle is heating.
The kettle will switch off automatically once
the water has boiled.
Important: Ensure the lid is firmly closed.
The kettle will not turn off if the lid is left
open. Do not remove the kettle from the
power base while in use.
Important: Avoid touching metal surfaces
when operating the kettle as these will be
hot.
6. Lift the kettle from the power base and
pour the water.
Note: Use caution when pouring the water
from your kettle as boiling water will scald.
7. The kettle may be stored on the power
base while not in use. The kettle will not
re-boil until the ON/OFF switch is pressed
downward.
Note: Ensure the power is turned off at the
power outlet when the kettle is not in use.
Should you accidentally allow the kettle to
operate without water, it will cut out for
boil-dry protection. If this occurs, allow the
kettle to cool before filling with cold water
and re-boiling.
Cord Storage Facility.
Excess cord can be stored by winding the
cord around the storage facility underneath
the power base.
360° power base
3
Sunbeam’s 3-Way
Safety System
Safety is a major consideration in the
design of a Sunbeam kettle. This is why we
have developed our 3-Way Safety System,
which ensures that your kettle will:
1. Automatically switch off after boiling.
For convenience, safety and energy
efficiency, your Sunbeam kettle features an
auto cut-out device.
2. Cut-out for boil-dry protection.
If the kettle is operated without water, it
will automatically cut-out, preventing any
damage to the element.
Care and Cleaning
Always disconnect the kettle from the
power outlet before cleaning.
Never immerse the kettle switch area, cord
or power base in water, or allow moisture to
come into contact with these parts.
Removal of mineral deposits.
Mineral deposits in tap water may cause
the interior of the water gauge to discolour.
To remove this build-up, use Sunbeam
Liquid Descaler, a simple to use, non-toxic
cleaner available from Sunbeam Appointed
Service Agents.
Alternatively:
1. Fill the kettle with 3 cups of white vinegar
and the remainder with water and allow to
stand overnight. DO NOT BOIL.
3. Shut-down in case of overheating.
In the event of overheating, the kettle will
automatically shut down to prevent further
damage. Should this occur, take your kettle
to a Sunbeam Service Centre or Appointed
Service Agent.
2. Empty the solution from the kettle. Fill the
kettle with clean water, bring to boil and
then discard the water. Repeat and the
kettle will then be ready to use.
To clean the stainless exterior.
The stainless steel surface may be wiped
over with a damp cloth and polished with a
soft dry cloth.
CAUTION: Do not use chemical, steel wool,
or abrasive cleaners to clean the outside
of the kettle, as these will scratch the
stainless steel surface.
4
12 Month Warranty
This Sunbeam product is covered by a 12 month replacement or repair
warranty, which is in addition to your rights under the Australian Consumer
Law (if your product was purchased in Australia) or New Zealand Consumer
Guarantees Act (if your product was purchased in New Zealand).
Should you experience any difficulties with your
product during the warranty period, please contact
our customer service line for advice on 1300 881 861
in Australia, or 0800 786 232 in New Zealand.
Alternatively, you can send a written claim to
Sunbeam to:
Australia
Units 5 & 6, 13 Lord Street
Botany NSW 2019 Australia
New Zealand
Level 6, Building 5, Central Park,
660-670 Great South Road,
Greenlane, Auckland
Upon receipt of your claim, Sunbeam will seek to
resolve your difficulties or, if the product is defective,
advise you on how to obtain a replacement or refund.
To assist us in managing warranty claims, we
recommend you register your product as soon as
practicable after purchase by creating a MySunbeam
account on our website and send a copy of your
original receipt to Sunbeam.
In order to make a claim under our warranty, you must
have the original proof of purchase documentation for
the product and present it when requested .
Should your product develop any defect within
12 months of purchase because of faulty materials
or workmanship, we will replace or repair it, at our
discretion, free of charge. A product presented for
repair may be replaced by a refurbished product
of the same type rather than being repaired.
Refurbished parts may be used to repair the product.
Our replacement or repair warranty only applies
where a defect arises as a result of faulty material or
workmanship during the warranty period. Your warranty
does not cover misuse or negligent handling (including
damage caused by failing to use the product in
accordance with this instruction booklet), accidental
damage, or normal wear and tear.
Your warranty does not:
• cover freight or any other costs incurred in making
a claim, consumable items, accessories that by
their nature and limited lifespan require periodic
renewal (such as seals) or any consequential loss or
damage; or
• cover damage caused by:
- power surges, power dips, voltage supply problems,
or use of the product on incorrect voltage;
- servicing or modification of the product other than
by Sunbeam or an authorised Sunbeam service
centre;
- use of the product with other accessories,
attachments, product supplies, parts or devices
that do not conform to Sunbeam specifications; or
- exposure of the product to abnormally corrosive
conditions; or
• extend beyond 3 months if the product is used
in commercial, industrial, educational or rental
applications.
The benefits given to you by our warranty are in addition
to other rights and remedies under law in relation to the
product.
In Australia our goods come with guarantees that cannot
be excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure
and for compensation for any other foreseeable loss or
damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality
and the failure does not amount to a major failure.
Our goods also come with guarantees that cannot be
excluded under the New Zealand Consumer Guarantees
Act.
If your warranty claim is not accepted, we will inform
you and if requested to do so by you, repair the
product provided you pay the usual charges for such
repair. You will also be responsible for all freight and
other costs.
Should your product require repair or service after the
warranty period, contact your nearest Sunbeam service
centre. For a complete list of Sunbeam’s service
centres, visit our website or call our customer service
line for advice on 1300 881 861 in Australia,
or 0800 786 232 in New Zealand.
Need help with your appliance?
Contact our customer service team or visit
our website for information and tips on
getting the most from your appliance.
In Australia
Visit www.sunbeam.com.au
Or call 1300 881 861
In New Zealand
Visit www.sunbeam.co.nz
Or call 0800 786 232
is a registered trademark.
‘Belle-Aqua™’ is a trademark of Sunbeam Corporation.
Made in China.
Due to minor changes in design or otherwise,
the product may differ from the one shown in this leaflet.
© Copyright.
ABN 45 000 006 771
Units 5 & 6, 13 Lord Street
Botany NSW 2019 Australia
Level 6, Building 5, Central Park
660-670 Great South Road
Greenlane, Auckland
New Zealand
Sunbeam Corporation is a division of GUD Holdings Ltd.
Sunbeam Corporation Limited 2018.
8/18
Loading...