SAFETY-GLO@
COOL MIST
HUMIDIFIER
Modal 644,646
Part # 66047
Important notes
Please read this manual carefully before using this device
For Household Use Only.
SAFETY-GLOB
COOL MIST HUMIDIFIER
INSTRUCTION BOOK
READ AND SAVE THESE INSTRUCTIONS
WHEN USING ELECTRICAL APPLIANCES,
ESPECIALLY WHEN CHILDREN ARE PRESENT,
BASIC SAFETY PRECAUTIONS SHOULD ALWAYS
BE FOLLOWED, INCLUDING THE FOLLOWING:
1.
READ ENTIRE INSTRUCTION BOOK BEFORE
USING.
2.
TO FILLWATER RESERVOIR, USE ONLY CLEAN,
COOL TAP WATER.
3.
PLACE HUMIDIFIER ON A FLAT, LEVEL SURFACE.
DO NOT PLACE NEAR HEATING DEVICES. KEEP
THE CORD AWAY FROM HEATED SURFACES AND
AREAS WHERE IT CAN BE STEPPED ON OR
TRIPPED OVER.
PLUG HUMIDIFIER INTO POLARIZED 120 VOLT AC
4.
OUTLET ONLY. BE SURE UNIT IS PLUGGED IN
FIRMLY AND COMPLETELY. TURN HUMIDIFIER OFF
AND UNPLUG WHEN NOT IN USE AND BEFORE
CLEANING.
5
NEVER OPERATE HUMIDIFIER WITH A DAMAGED
CORD OR PLUG. IF IT IS NOT WORKING PROPERLY,
OR IT HAS BEEN DROPPED OR DAMAGED,
RETURN IT TO THE APPLIANCE SERVICE STATION
FOR EXAMINATION, REPAIR, OR POSSIBLE
ELECTRICAL OR MECHANICAL ADJUSTMENT
6.
DO NOT ADD MEDICATION OF ANY TYPE INTO THE
WATER IN THE RESERVOIR. DO NOT COVER VENTS
OR LOUVERS OR PLACE ANYTHING OVER THEM
WHILE HUMIDIFIER IS OPERATING. NEVER DROP
OR INSERT ANY OBJECT INTO ANY
OPENING.
7. SUPERVISION IS RECOMMENDED WHEN
HUMIDIFIER IS USED NEAR CHILDREN,
INVALIDS OR PETS.
8. DO NOT REMOVE HUMIDIFIER MOTOR
ASSEMBLY WHILE HUMIDIFIER IS OPERATING.
9.
DO NOT TILT OR TIP HUMIDIFIER OR ATTEMPT
TO EMPTY OR FILLWHILE IN OPERATION.
10. TURN HUMIDIFIER OFF AND UNPLUG WHEN
WATER RESERVOIR IS EMPTY AND BEFORE
CLEANING OR MOVING HUMIDIFIER.
1 11. TO GUARD AGAINST ELECTRICAL SHOCK, DO NOT
IMMERSE HUMIDIFIER MOTOR ASSEMBLY IN
WATER OR OTHER LIQUIDS.
12. DO NOT USE OUTDOORS.
13. DO NOT USE HUMIDIFIER OTHER THAN FOR
1
HUMIDITY CONTROL.
L