Sunbeam 0125, 0181 Owner's Manual

Solar Audio Accent Tables

Items #

0125, 0181

0125 0181

The schematics in this manual are for assembly and
operation illustration only. They may differ from the Solar
Audio Tables actual appearance.

Owner’s Manual

Package Contents

THIS MANUAL IS INTENDED TO BE USED FOR BOTH ITEMS # 0125 AND # 0181.

Before beginning product assembly, make sure all contents are present. Compare parts with package contents list and
diagram. If any part is missing or damaged, do not attempt to assemble the product or return to the place of purchase.
Contact our customer service toll free at 1-877-387-3639 for replacement parts or further instructions.

A

B

C

PART DESCRIPTION QUANTITY

A Solar Audio Table with Bluetooth® Enabled Speaker 1

B AUX Cable 1

C Remote Control 1

D 10V/1A DC Adapter and Wall Plug 1

Page 2

D

Setup and Operation

WARNING:

Read the entire instructions before beginning and follow the steps outlined. Failure to follow the instructions may
decrease the lifespan of the rechargeable battery and may result in poor performance.

1. Charging the Solar Audio Table

(I) Plug in the Solar Audio Table with the 10V/1A DC adaptor and wall plug included.

(II) The red LED will turn ON during charging and will turn OFF after charging is complete.

(III) Unplug DC charger after charging is complete.

Note: The battery will charge without using the wall plug when the solar panel is exposed to sunlight.

2. How to Use the Remote Control

3. Getting Started

(I) Power On/Off: Press to turn on or off.

(II) LED Light On/Off: Press to turn light on or off.

(III) Next Track: Press quickly to go to the next track.
Volume Up: Press and hold to increase the volume.

(IV) Previous Track: Press quickly to go to the previous track.
Volume Down: Press and hold to decrease the volume.

(V) Play/Pause: Press to play or pause the track.
Bluetooth® Enabled: Press and hold to start the pairing process.

(I) Press and hold the power on/off button for 3 seconds on the remote control.

1-877-387-3639 | Page 3

Setup and Operation

4. How to Pair the Solar Audio Table

(I) To start the pairing process, press and hold the Bluetooth® wireless technology button, the blue and red LEDs will blink
rapidly indicating the unit is in standby mode for pairing.

(II) Start the Bluetooth® function on your device, locate Solar Audio Accent Table 0125 or Solar Audio Accent Table 0181
and connect to either one from your Bluetooth® device(s) list.

(III) The LED will turn blue when paired.

(IV) For non-Bluetooth® devices, use the AUX cable provided.

Note:
1: If the pairing is not successful, power off the speaker, then power on the speaker and then re-pair once again.
2: After initial pairing success, paired devices will be stored in memory. Therefore, there is no need to go through the
pairing steps for future use. (Note: You will need to re-pair the device if the item is deleted from your device list.)
3: If you want to pair the speaker with another device, disconnect the Solar Audio Accent Table 0125 or Solar Audio
Accent Table 0181 with existing paired device by pressing (button as shown) , then pair with a new device, following
the steps 1-3 as indicated above.

AUX IN

DC

5. How to Use the AUX Port (for non-Bluetooth® enabled devices)

(I) Using the AUX cable (included), you can connect the Solar Audio Accent Table 0125 and Solar Audio Accent Table
0181 to the AUX port on any music device.

(II) Play music through the connected devices.

Note: Only the “Volume+/-” and “LED-lighting” function works in AUX mode.

Page 4

Care & Maintenance

CARE INSTRUCTIONS:

• Clean only with a damp cloth.

• Do not use detergents or chemical solvents as this might damage the nish.

• Store Solar Audio Accent Table in an area sheltered from direct contact with inclement weather (such as high winds,

sleet, hail, snow, dust and debris).

• If desired, cover Solar Audio Accent Table to protect exterior surface when not in use. (Cover not included).

Note: In a salt-air environment (such as near an ocean), corrosion occurs more quickly than normal. Frequently check for
corroded area and repair them promptly.

Warnings and Cautions

WARNING: Do not submerge in water.

WARNING: Do not sit on the table.

WARNING: Do not place sharp tools or heavy equipment on the Solar Audio Accent Table as it may scratch
and/or damage the surface.

WARNING: Do not expose to temperatures below 14°F (-10°C) or above 122°F (50℃).

1-877-387-3639 | Page 5

FCC Compliance

Compliance with FCC Regulations

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.

If at any time in the future you want to dispose this product, please note that electrical products should not be
disposed with household waste. Find out where your nearest recycling centre is. Consult your local authority or
retailer for more details (Waste Electrical and Electronic Equipment Directive).

THE SPECIFICATION AND EXTERNAL APPEARANCE OF THE SET ARE SUBJECT TO CHANGE WITHOUT PRIOR
NOTICE.

Page 6

Limited Warranty

JAY TRENDS MERCHANDISING INC. LIMITED ONE (1) YEAR WARRANTY

Jay Trends warrants your new Solar Patio Table product will be free from defects in material and workmanship for one (1)
year from the date of purchase.

Conditions and Limitations

Jay Trends warrants its products against manufacturing defects to the original purchaser only, and is subject to the
following conditions and limitations:

This factory warranty is non-transferable and may not be extended what-so-ever by any of our representatives.

The product must be assembled, maintained, and operated in accordance with the printed instructions accompanying it.

This limited warranty does not cover damages caused by misuse, lack of maintenance, grease res, hostile environments,

accident, alterations, abuse or neglect and parts installed from other manufacturers will nullify this warranty. Discoloration
to plastic parts from chemical cleaners or UV exposure is not covered by this warranty.

Any damages to the product due to weather damage, hail, rough handling, damaging chemicals or cleaners will not be the
responsibility of Jay Trends.

This limited warranty does not cover any scratches, dents, painted nishes, corrosion or discoloring by heat, abrasive and

chemical cleaners, nor chipping on porcelain enamel parts, nor any components used in the installation of the product.

Should deterioration of parts occur to the degree of non-performance (rusted through or burnt through) within the duration
of the warranted coverage, a replacement part will be provided.

The bill of sale or copy will be required when making any warranty claims from Jay Trends.

All parts replaced under the Limited One (1) Year Warranty Policy are subject to a single claim.

Jay Trends will not be responsible for the installation, labor, or any other costs related to the re-installation of a warranted
part, and such expenses are not covered by this warranty.

Jay Trends reserves the right to have its representative inspect any product or part prior to honoring any warranty claim.

Jay Trends shall not be liable for any transportation charges, labor costs, or export duties.

Replacement Parts

In the event that an item has been lost or damaged either by the manufacturer or in shipping you may request a

replacement. Replacement parts are not available for all units and only given at Jay Trends’ discretion. We will assess
any damage and nd a solution, which could include ordering and shipping a replacement to you. No replacements

are available for discontinued items or repackaged (open box) products. Please call Jay Trends Customer Service at
1-877387-3639 for replacement parts before returning the damaged item. Please have the following information, which
can be found in your instruction manual, ready before you call Customer Service.

1. Model Number of Item #

2. Lot Code Number #

3. Shipping Address

4. A picture of the damaged item may be requested.

5. Pictures should be sent to [e-mail]

Customer Service: 1-877-387-3639 in USA & Canada

Sunbeam™ logo is a trademark of Sunbeam Products, Inc. used under license. Distributed by Jay Trends Merchandising Inc.

Jay Trends Merchandising Inc.

9600 Meilleur, Suite 101

Montreal, QC H2N 3E3, Canada

[e-mail]

1-877-387-3639 | Page 7