SUMMIT APPLIANCE
6. Repairs to parts or systems resulting from unauthorized modifications made to the freezer.
7. Expenses for travel and transportation for product service in remote locations.
SUMMIT APPLIANCE
Felix Storch, Inc.
770 Garrison Avenue
Bronx, NY 10474
8. The removal and reinstallation of your freezer if it is installed in an
inaccessible location or is not installed in accordance with published
installation instructions.
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
CUSTOMER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. WARRANTOR SHALL NOT BE LIABLE FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS, SO THESE EXCLUSIONS OR
LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH
VARY FROM STATE TO STATE.
5 YEAR COMPRESSOR WARRANTY
1. The compressor is covered for 5 years.
2. Replacement does not include labor.
Keep this book and your sales slip together for future reference.
You must provide proof of purchase or installation date for inwarranty service. Write down the following information about your
major refrigerator to better help you obtain assistance or service if
you ever need it. You will need to know your complete model number and serial number. You can find this information on the model
and serial number label located on the product.
Dealer name__________________________________________
Address ______________________________________________
Phone number__________________________________________
Model number __________________________________________
Serial number ___________________________________________
Purchase date ___________________________________________
SCUF 18/20/25
Summit Frost Free Freezer
Table of Contents
Freezer Safety Page 2
Safety Instructions
Proper Disposal of Your Old Freezer
Installation Instructions Page 3
Key Eject Lock
Location Requirements Page 4
Adjusting the Door Page 5
Freezer Use
Digital Thermostat Instructions Page 6
Freezer Care Page 6-8
Cleaning your frost-free freezer
Base Grill
Changing the light bulb
Loss of Power
Moving Care
Troubleshooting Page 8-10
Service and Warranty Page 11-12
If you need service or call with a question, have this
information ready. We advise you to keep this Owners
Manual in your possession.
MODEL:
SERIAL NUMBER:
DATE OF PURCHASE:
12
SUMMIT APPLIANCE
FREEZER SAFETY
Your safety and the safety of others are very important to us.
We have provided many important safety messages in this manual
and on your appliance. Always read and obey all safety messages.
You can be killed or seriously injured if you don’t follow instructions.
All safety messages will tell you what the potential hazard is, tell you
how to reduce the chance of injury, and tell you what can happen if
the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electric shock, or injury when
using your refrigerator, follow these basic precautions:
• Plug into a grounded 3 prong outlet.
• Do not remove ground prong.
• Do not use an adapter.
• Do not use an extension cord.
• Disconnect power before servicing.
• After servicing, replace all parts and panels before operating.
• Use nonflammable cleaner.
• Keep flammable materials and vapors, such as gasoline, away from
freezer.
SUMMIT APPLIANCE
ASSISTANCE OR SERVICE
Before calling for assistance or service, please check
“Troubleshooting.” It may save you the cost of a service call. If you
still need help, follow the instructions below.
When calling, please know the purchase date and the complete
model and serial number of your appliance. This information will
help us to better respond to your request.
If You Need Replacement Parts
If you need to order replacement parts, we recommend that you only
use factory specified parts. Factory specified parts will fit right and
work right, because they are made with the same precision used to
build every new SUMMIT® appliance.
Call customer service toll free in the U.S.A. toll free:
1-800-287-8799 Monday to Friday 9:00 am. — 5:00 p.m. (EST).
FREEZER WARRANTY
ONE YEAR LIMITED WARRANTY
For one year from the date of purchase, when this freezer is operated and maintained according to instructions attached to or furnished with the product, warrantor will pay for factory specified
parts and repair labor to correct defects in materials or workmanship. Service must be provided by a designated service company.
ITEMS WARRANTOR WILL NOT PAY FOR
• Use two or more people to move and install freezer.
• Remove doors or lid from your old freezer.
[SUFFOCATION HAZARD]
Proper Disposal of Your Old Freezer
Suffocation Hazard
Remove doors from your old freezer.
Leave shelves in place.
2
1. Service calls to correct the installation of your freezer, to instruct
you how to use your freezer, to replace or repair house fuses or to
correct house wiring or plumbing.
2. Service calls to repair or replace appliance light bulbs. Consumable parts are excluded from warranty coverage.
3. Damage resulting from accident, alteration, misuse, abuse, fire,
flood, acts of God, improper installation, installation not in accordance with electrical or plumbing codes, or use of products not approved by warrantor.
4. Replacement parts or repair labor costs for units operated outside
the United States.
11
SUMMIT APPLIANCE
• Does the freezer need to be cleaned? See “Freezer Care.”
• Are the air vents blocked? This prevents cold air movement.
Move objects away from the air vents. See “Ensuring Proper Air Circulation” for air vent locations.
• Is the door opened often? Be aware that the freezer will warm
when this occurs. In order to keep the freezer cool, try to get everything you need out of the freezer at once and close the door as soon
as the material is removed.
• Has a large amount of material just been added to the freezer?
Adding a large amount of material warms the freezer. It can take several hours for the freezer to return to the normal temperature.
• Is the control set correctly for the surrounding conditions? See
“Using the Control.”
The door will not close completely or is difficult to open
• Are containers blocking the door? Rearrange containers so that
they fit more tightly and take up less space.
• Are the shelves and basket out of position (on some models)?
Put the shelves and basket back into their correct positions.
• Are the gaskets dirty or sticky? Clean gaskets according to the
directions in “Freezer Care.”
• Does the freezer wobble or seem unstable? See “Adjust the
Door.”
The freezer clicks but does not run
• Has the local power failed? Unplug the freezer for 30 minutes to
allow the refrigeration system to equalize. During this time, keep the
door closed whenever possible.
SUMMIT APPLIANCE
INSTALLATION INSTRUCTIONS
Excessive Weight Hazard
Use two or more people to move and install freezer.
Failure to do so can result in back or other injury.
1. Remove Packaging Materials
2. Remove tape and glue residue from surfaces before turning on the
freezer. Rub a small amount of liquid dish soap over the adhesive with
your fingers. Wipe with warm water and dry.
3. Do not use sharp instruments, rubbing alcohol, flammable fluids, or
abrasive cleaners to remove tape or glue. These products can damage
the surface of your freezer. For more information, see ‘Freezer
Safety.”
4. When Moving Your Freezer:
Your freezer is heavy. When moving the freezer for cleaning or service, be sure to protect the floor. Always pull the freezer straight out
when moving it. Do not wiggle or “walk” the freezer when trying to
move it, because floor damage can occur.
5. Clean Before Using
After you remove all of the packaging materials, clean the inside of
your freezer before using it. See the cleaning instructions in “Freezer
Care.”
Key Eject Lock
To lock or unlock the freezer, you must hold the key in the lock while
turning. The lock is spring loaded, so the key cannot be left in the
lock.
If the key is lost, contact your dealer for a replacement. Always give
the model and serial number of your freezer when requesting a replacement key.
10
3
SUMMIT APPLIANCE
LOCATION REQUIREMENTS
Explosion Hazard
Keep flammable materials and vapors, such as gasoline, away
from freezer.
Failure to do so can result in death, explosion, or fire.
IMPORTANT: Do not install the freezer near an oven, radiator, or
other heat source, nor in a location where the temperature will fall
below 40°F (5°C).
Check the strength of the floor before installing your freezer. It
should hold the weight of a fully loaded freezer. Allow at least 3” (7.5
cm) of airspace at the top and on both sides of the freezer and 1” (2.5
cm) between the back of the freezer and the wall. If the freezer is
going to be placed against a wall, leave extra space on the hinge
side so the door can open wider than its width.
NOTE: This freezer may be installed side by side with another freezer
or refrigerator. Allow for a 3’ (7.5 cm) clearance at the top and sides
and a ¼” (0.64 cm) clearance between the appliances.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
SUMMIT APPLIANCE
• Is the power supply cord unplugged? Plug into a grounded 3
prong outlet.
• Is a light bulb loose in the socket or burned out? See “Changing
the Light Bulb.”
The motor seems to run too much
• Is there something preventing the door from closing? Move the
package so the door closes properly.
• Is the room temperature hotter than normal? The motor will run
longer under warm conditions. At normal room temperatures, your
motor will run about 40% to 80% of the time. Under warmer conditions, it will run even more.
• Has a large amount of product just been added to the freezer?
Adding a large amount of product warms the freezer. The motor normally will run longer to cool the freezer back down.
• Is the door opened often? The motor will run longer when this occurs. Conserve energy by getting all items out at one time, and closing the door as soon as possible.
• Is the control set correctly for the surrounding conditions? See
“Using the Control.”
• Is the door or not closed completely? Push the door firmly shut. If
it will not shut all the way, see “The door will not close completely”
later in this section.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or
electrical shock.
Recommended grounding method
A 115 Volt, 60 Hz. AC only 15- or 20- amp fused or circuit breaker,
grounded electrical supply is required. It is recommended that a
separate circuit serving only your freezer be provided. Use outlets
that cannot be turned off by a switch or pull chain. Do not use an
extension cord.
4
• Are the condenser coils dirty (on some models)? This prevents
air transfer and makes the motor work harder. Clean the condenser
coils. See “Freezer Care.”
• Is the door gasket sealed all the way around? Contact a qualified
person or a technician.
• Is there enough air circulation space around the freezer? See
“Location Requirements.”
NOTE: If the problem is not due to any of the above, remember that
your new freezer will run longer than your old one due to its highefficiency motor.
Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.
9
SUMMIT APPLIANCE
Loss of Power
After the power is restored, unplug the freezer for 30 minutes, to allow the refrigeration system to equalize. During this time keep the
door closed whenever possible.
REMEMBER: A full freezer stays cold longer than a partially filled
one.
Moving Care
1. Remove all containers.
2. Unplug the freezer.
3. Clean it thoroughly.
4. Tape the freezer shut and tape the electrical cord to the cabinet.
When you get to your new location, refer to the “Installation Instructions” and “Freezer Use” sections for information on installation and
setting the controls.
TROUBLESHOOTING
Try the solutions suggested here first to avoid the cost of an un-
necessary service call...
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or
electrical shock.
• Is the power supply cord unplugged?
Plug into a grounded 3 prong outlet.
• Has a circuit breaker tripped?
Reset the circuit breaker.
The lights does not work
SUMMIT APPLIANCE
Adjusting the Door
1. Locate the two front leveling legs taped among the packing materials.
2. Screw these legs into the front holes on the bottom of the freezer.
The back of the freezer rests on two fixed supports.
3. Adjust the front legs just enough to lift the cabinet up off of the
floor.
NOTE: If your model is equipped with rollers, the front legs should
be lowered enough to lift the rollers off of the floor to ensure the
freezer does not roll forward when the door is opened.
4. Place a leveling tool on top of the freezer first side to side, then
front to back. Turn leg counterclockwise to raise a corner. Turn leg
clockwise to lower a corner.
5. Repeat Step 4 until freezer is level.
6. After freezer is fully loaded, recheck with level as in Step 4.
REFRIGERATOR USE
In order to ensure proper temperature, you need to permit proper
airflow in the freezer. As shown in the illustration, cool air enters
through the freezer wall and moves down. The air then re-circulates
through the vent near the bottom.
Do not block any of these vents. If the vents are blocked, airflow will
be prevented, and temperature and moisture problems may occur.
Allow the freezer to cool 6 to 8 hours before filling. Never add more
than 2 to 3 lbs (907 to 1,350 g) of material per cubic foot (28.32 L) of
freezer space.
NOTE: When the freezer is first started, the compressor will run constantly until the freezer is cooled, It may take up to 6 or 8 hours (or
longer), depending on room temperature and the number of times
the freezer door is opened. After the freezer is cooled, the compressor will turn on and off as needed to keep the freezer at the proper
temperature.
The outside of your freezer may feel warm. This is normal. The
freezer’s design and main function is to remove heat from packages
and air space inside the freezer. The heat is transferred to the room
air, making the outside of the freezer feel warm.
8
5
SUMMIT APPLIANCE
Digital Thermostat Instructions
If you find that it is necessary to change the temperature setting for your
digital thermostat controlled freezer, please refer to the following instructions. The front panel of the thermostat is illustrated here:
To see the SETPOINT:
Push and immediately release the SET key -the display will show the
SET point value. Wait 5 seconds and the probe value will display again.
To change the SETPOINT:
Push and hold the SET key for more then 2 seconds to change the set
point value; The value of the set point will be displayed, and the
“snowflake” LED will start blinking.
To change the SET value:
Push the up or down arrows to the desired setting; The new setting will
be memorized after 15 seconds, provided no other keys are pushed.
melting
snowflake
snowflake
Up & Down arrows
“SET” key
FREEZER CARE
Cleaning Your Frost-Free Freezer
Explosion Hazard
Use nonflammable cleaner.
Frost-free means that you do not have to defrost your freezer.
Frost is removed by air moving and collecting any moisture and
depositing it on the cooling coil. The cooling coil periodically
warms up enough to melt the frost, and the water then flows down
to the drain pan (located behind the base grill) where it is evaporated.
Complete cleaning should be done at least once a year.
1. Unplug freezer or disconnect power.
2. Remove all substances.
3. Wash the inside walls with a solution of mild detergent in warm
water or 2 tbs (26 mg) baking soda to 1 qt (0.95 L) warm water.
SUMMIT APPLIANCE
• Do not use abrasive or harsh cleaners such as window sprays,
scouring cleansers, flammable fluids, cleaning waxes, concentrated
detergents, bleaches or cleansers containing petroleum products on
plastic parts, interior and door liners or gaskets. Do not use paper
towels, scouring pads, or other harsh cleaning tools. These can
scratch or damage materials.
4. Rinse well and wipe dry with a clean soft cloth.
5. Use the appropriate cleaning method for your exterior finish.
Painted metal: Wash exteriors with a clean sponge or soft cloth and
a mild detergent in warm water. Do not use abrasive or harsh cleaners, or cleaners designed for stainless steel. Dry thoroughly with a
soft cloth. For additional protection against damage to painted metal
exteriors, apply appliance wax (or auto paste wax) with a clean, soft
cloth. Do not wax plastic parts.
6. Plug in freezer or reconnect power.
7. Replace all containers.
Base Grill
To Remove and Replace the Base Grill:
1. Open the freezer door and remove the base grill by pulling down
and out from the top.
2. Replace the base grill by putting the clips in the openings in the
freezer panel. Push in until the base grill snaps into place.
Changing the light bulb
NOTE: Not all appliance bulbs will fit your freezer. Be sure to re-
place the bulb with one of the same size, shape, and wattage.
1. Unplug freezer or disconnect power.
2. Remove the light shield. From the front of the light shield, push
backward and down.
3. Replace the light bulb with an appliance bulb of the same wattage.
4. Replace the light shield.
5. Plug in freezer or reconnect power.
6
7
Loading...