French Translation ............................................................................ 13 - 27
2
APPLIANCE SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always
read and obey all safety messages.
This is the Safety Alert Symbol. The symbol alerts you to potential hazards
that can kill or injure you and others. Safety messages will follow the Safety
Alert Symbol and either the word "DANGER" or "WARNING".
DANGER means that failure to heed this
safety statement may result in severe
personal injury or death.
WARNING means that failure to heed
this safety statement may result in
extensive product damage, serious
personal injury, or death.
All safety messages will alert you about the potential hazard, tell you how to reduce the chance of
injury, and let you know what can happen if the instructions are not followed.
3
IMPORTANT SAFEGUARDS
Before the appliance is used, it must be properly positioned and installed
as described in this manual, so read the manual carefully. To reduce the
risk of fire, electrical shock or injury when using the appliance, follow basic
precautions, including the following:
Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter,
and do not use an extension cord.
Do not connect grounding wire to a gas or water pipe.
Replace all panels before operating.
It is recommended that a separate circuit serving only your appliance be provided. Use
receptacles that cannot be turned off by a switch or pull chain.
Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or
explosion. And do not store or use gasoline or other flammable vapors and liquids in the
vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.
Before proceeding with cleaning and maintenance operations, make sure the power line of the
unit is disconnected.
Do not connect or disconnect the electric plug when your hands are wet.
Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so can
result in electrical shock or death.
Do not attempt to repair or replace any part of your appliance unless it is specifically
recommended in this manual. All other servicing should be referred to a qualified technician.
This appliance is CFC- and HFC-free and contains a small quantity of liquid propane (R290a)
which is environmentally friendly, but flammable. It does not damage the ozone layer, nor does
it increase the greenhouse effect. Care must be taken during transportation and setting up of
the appliance that no parts of the cooling system are damaged. Leaking coolant can ignite and
may damage the eyes.
In the event of any damage:
- Avoid open flames and anything that creates a spark,
- Disconnect from the electrical power line,
- Air the room in which the appliance is located for several minutes and
- Contact the Service Department for advice.
The more coolant there is in an appliance, the larger the room it should be installed in. In the
event of a leakage, if the appliance is in a small room, there is the danger of combustible gases
building up. The amount of coolant in the appliance is stated on the data plate on the appliance.
4
It is hazardous for anyone other than an Authorized Service Person to carry out servicing or
DANGER - Risk of fire or explosion. Flammable refrigerant used.
• Do not use mechanical devices to defrost refrigerator. Do not
puncture refrigerant tubing.
• To be repaired only by trained service personnel. Do not puncture
refrigerant tubing.
CAUTION - Risk of fire or explosion
• Flammable refrigerant used. Consult repair manual/owner’s guide
before attempting to service this product. All safety precautions
must be followed.
• Dispose of properly in accordance with federal or local regulations.
Flammable refrigerant used.
• Risk of fire or explosion due to puncture of refrigerant tubing.
Follow handling instructions carefully. Flammable refrigerant used.
CAUTION - Avoid obstructing any ventilation openings in the appliance or
in the enclosure when building-in.
repairs to this appliance.
Take serious care when handling, moving, and using the appliance to avoid either damaging
the refrigerant tubing or increasing the risk of a leak.
Replacing component parts and servicing shall be done by factory authorized service
personnel so as to minimize the risk of possible ignition due to incorrect parts or improper
service.
FOLLOW WARNING CALLOUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL
or other injury.
To prevent overheating and fire hazard, remove all packaging before use, including the tray at
the bottom of the appliance.
When installing, leave at least 8" at the back of the unit.
To ensure proper ventilation for your appliance, the front of the unit must be completely
unobstructed. Choose a well-ventilated area with temperatures above 60°F (16°C) and below
90°F (32°C). This unit must be installed in an area protected from the elements, such as wind,
rain, water spray or drips.
The appliance should not be located next to ovens, grills or other sources of high heat.
The appliance must be installed with all electrical, water and drain connections in accordance
Use two or more people to move and install the appliance. Failure to do so can result in back
5
with state and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly
grounded in accordance with the National Electrical Code and local codes and ordinances, is
required.
Do not kink or pinch the power supply cord of the appliance.
The size of the fuse (or circuit breaker) should be 15 amperes.
It is important that the appliance be leveled in order to work properly. You may need to make
several adjustments to level it.
All installations must be in accordance with local plumbing code requirements.
Make certain that the pipes are not pinched, kinked or damaged during installation.
Check for leaks after connection.
Never allow children to operate, play with or crawl inside the appliance.
Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may
damage or discolor the interior.
Use this appliance only for its intended purpose as described in this User's Manual.
Keep fingers out of the “pinch point” areas. Clearances between the doors and between the
doors and cabinet are necessarily small. Be careful closing doors when children are in the
area.
Risk of child entrapment!
Child entrapment and suffocation are not problems of the past. Junked or abandoned
appliances are still dangerous, even if they will “just sit in the garage a few days”.
Before discarding your old refrigerator:
Take off the doors.
Leave the shelves in place so that children may not easily climb inside.
- SAVE THESE INSTRUCTIONS -
6
TECHNICAL INFORMATION
Model
SCRR231
SCRR491
SCFF236
SCFF496
Description
1-door
refrigerator
2-door
refrigerator
1-door freezer
2-door freezer
Temperature
Range
32 to 50°F
(0 to 10°C)
32 to 50°F
(0 to 10°C)
-8 to 0°F
(-22 to -18°C)
-8 to 0°F
(-22 to -18°C)
Unit Dimensions
29"W x 32.2"D
x 82.5"H
54"W x 32.2"D x
82.5"H
29"W x 32.2"D x
82.5"H
54"W x 32.2"D
x 82.5"H
Capacity
23 ft3
46.6 ft3
23 ft3
46.6 ft3
Unit Weight
282 lbs
447 lbs
282 lbs
447 lbs
Door/Housing/
Liner Material
304 stainless
steel
304 stainless
steel
304 stainless
steel
304 stainless
steel
Self-Closing
Door(s)
Yes
Yes
Yes
Yes
No. of shelves
3 6 3
6
Shelf Material
Plastic-coated
steel
Plastic-coated
steel
Plastic-coated
steel
Plastic-coated
steel
Shelf Loading
176 lbs/shelf
176 lbs/shelf
176 lbs/shelf
176 lbs/shelf
Interior Lighting
Yes
Yes
Yes
Yes
Temperature
Display
Yes
Yes
Yes
Yes
Type of
Controller
Digital
Digital
Digital
Digital
Electrical Rating
115V AC, 60Hz
115V AC, 60Hz
115V AC, 60Hz
115V AC, 60Hz
Connection
Rating
3.76A / 720W
3.36A / 643W
6.45A / 1234W
10.25A /
1962W
Compressor
Power
590W
495W
590W
854W
Defrost
Automatic
Automatic
Automatic
Automatic
Refrigerant
R290a
R290a
R290a
R290a
Casters
Yes
Yes
Yes
Yes
ETL Compliance
Yes
Yes
Yes
Yes
7
INSTALLATION
IMPORTANT! PLEASE READ BEFORE INSTALLATION
If the unit has recently been transported, let it stand upright for a minimum of
24 hours before plugging it in.
Be sure there is proper ventilation around the unit in the area where it will
operate. Leave at least 8” at the back.
Make sure all accessories are installed (i.e. shelves, shelf clips, casters)
before plugging the unit in.
Be sure the unit has dropped down to desired temperature before loading it
with product.
Please read through the manual in its entirety.
Cabinet Location Guidelines:
Install the unit on a strong and level surface.
– Unit may make unpleasant noises if surface is uneven.
– Unit may malfunction if surface is uneven.
Install the unit in a well-ventilated indoor area.
– Unit performs more efficiently in a well-ventilated area.
– For best performance, maintain a clearance of 8" at the back of the unit.
– Outdoor use may cause decreased efficiency and damage to the unit.
Avoid installation in a high humidity and/or dusty area.
– Humidity could cause unit to rust and experience decreased efficiency.
– Dust collected on the condenser coil will cause the unit to malfunction.
Clean the condenser at least once a month with a brush or clean cloth.
Select a location away from heat and moisture-generating equipment.
– High ambient temperatures will cause the compressor to overwork, leading
to higher energy bills and gradual breakdown of the unit.
Electrical Connection:
Be sure the required compressor voltage is being supplied at all times. Low or
high voltage can detrimentally affect the refrigeration unit.
All units should be plugged into a grounded and properly-sized electrical outlet
with appropriate overcurrent protection. Refer to the electrical requirements on
the nameplate.
Be sure the unit has its own dedicated outlet.
Do not use an extension cord.
8
OPERATION
For refrigerators SCRR231 For freezers SCFF236
and SCRR491 and SCFF496
When loading the unit, be careful not to block the air duct located at the back
and the fan on the ceiling of the unit. Blocking the air flow may reduce the
performance of the unit.
For the best performance, maintain at least 4 inches of clearance between the
contents and the air duct.
Set the shelves that come with the unit to fit your needs.
Do not leave the unit door open for long periods of time. For the most efficient
operation, close the door immediately after use.
Temperature Controller:
The digital temperature controller is located on the front of the unit, above the door.
It displays the temperature inside the unit and allows you to set the desired
temperature; it also controls the defrost function.
To set the desired temperature:
1. Press the SET button. The set temperature will be displayed.
2. Press the ▲ or ▼ button to modify and store the displayed value.
3. Press SET to exit the adjustment. If no button is pressed within 10 seconds,
the cabinet temperature will be displayed.
Refrigerator Light:
Press the button to turn the light in the refrigerator on and off.
Defrosting:
Defrosting is automatic, but the process can be induced manually by pressing the
button for refrigerator models (press the
button for freezers) and holding it for 6
seconds. Repeat this process to stop defrosting.
Loading...
+ 19 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.