BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS.
Write Serial No. (on lower left corner of
inside cabinet) here:
________________________________
770 Garrison Avenue
Bronx, NY 10474
www.summitappliance.com
2
TABLE OF CONTENTS
Appliance Safety
3
Important Safeguards
3-4
Location of Parts
5-6
Installation Instructions
7-9
Before Using Your Appliance
7
Installation of Your Applianc e
7
Electrical Connection
7-8
Extension Cord
8
Reversing the Door Swing of Your Appliance
8-9
Installing the Stainless Steel Handle
9
Operating Your Appliance
9-12
Control Panel for SPR626OS
9-10
Control Panel for SCFF51OS
10-11
Sabbath Mode
11
Temperature Memory Function
11
Defrosting
11-12
Using the Freezer
12
Temperature Alarm / Door Alarm
12
Door Lock
12
Shelves
12
Care and Maintenance
13
Cleaning Your Appliance
13
Power Failure
13
Vacation Time
13
Moving Your Appliance
13
Energy Saving Tips
13
Troubleshooting
14-15
Limited Warranty
16
3
APPLIANCE SAFETY
Your safety and the safety of others ar e very important.
We have provided many important safety messages in this manual and on your appliance. Always read
and obey all safety messages.
This is the Safety Alert Symbol. The symbol alerts you to potential hazards that
can kill or injure you and others. All safety messages will follow the Safety
Alert Symbol and either the words "DANGER" or "WARNING".
Danger means that failure to heed this safety
statement may result in severe personal injury or
death.
Warning means that failure to heed this safety
statement may result in extensive product
damage, serious personal injury, or death.
All safety messages will alert you about the potential hazard, tell you how to reduce the chance of injury,
and let you know what can happen if the instructions are not followed.
IMPORTANT SAFEGUARDS
Before the appliance is used, it must be properly positioned and installed as
described in this manual, so read the manual carefully. To reduce the risk of fire,
electrical shock or injury when using the appliance, follow basic precautions,
including the following:
•Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do
not use an extension cord.
• Replace all panels before operating.
• It is recommended that a separate circuit serving only your appliance be provided. Use receptacles
that cannot be turned off by a switch or pull chain.
•Never clean appliance parts with f lam mable fluids. Th ese f umes can create a f ire ha zar d or explosion.
And do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any
other appliance. The fumes can create a fire hazard or explosion.
• Do not connect or disconnect the electric plug when your hands are wet.
• Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so can result in
electrical shock or death.
•Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in
this manual. All other servicing should be referred to a qualified technician.
4
FOLLOW WARNING CALLOUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL
•Use two or more people to move and install appliance. Failure to do so can result in back or other
injury.
•To ensure proper ventilation for your appliance, the front of the unit must be completely unobstructed.
Choose a well-ventilated area with temperatures above 44°F (7°C) and below 106°F (41°C).
• The appliance should not be located next to ovens, grills or other sources of high heat.
• The appliance must be installed with all electrical, water and drain connections in accordance with
state and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in
accordance with the National Electrical Code and local codes and ordinances, is required.
• Do not kink or pinch the power supply cord of the appliance.
• The size of the fuse (or circuit breaker) should be 15 amperes.
• It is important that the appliance be leveled in order to work properly. You may need to make several
adjustments to level it.
• All installations must be in accordance with local plumbing code requirements.
• Make certain that the pipes are not pinched, kinked or damaged during installation.
• Check for leaks after connection.
• Never allow children to operate, play with or crawl inside the appliance.
• Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may damage
or discolor the interior.
• Use this appliance only for its intended purpose as described in this Instruction Manual.
• Keep fingers out of the “pinch point” areas. Clearances between the door and cabinet are necessarily
small. Be careful closing doors when children are in the area.
Risk of child entrapment!
Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are
still dangerous, even if they will “just sit in the garage a few day s”.
Before discarding your old refrigerator:
• Take off the doors
• Leave the shelves in place so that children may not easily climb inside.
- SAVE THESE INSTRUCTIO NS -
5
LOCATION OF PARTS
Digital Control Panel
Shelves (3)
Bottom Grille
Adjustable Legs
LED Light
Security Lock
Stainless Steel Door
Stainless Steel Handle
Shelves (3)
Bottom Grille
Adjustable Legs
LED Light
Security Lock
Door
Handle
Digital Control Panel
MODEL SPR626OS – OUTDOOR REFRIGERATOR
MODEL SCFF51OS – OUTDOOR FREEZER
6
MODEL SPR315OS – OUTDOOR REFRIGERATOR
7
INSTALLATION INSTRUCTIONS
BEFORE USING YOUR APPLIANCE
• Remove the exterior and interior packing.
• Before connecting the ap pliance to the power sourc e, let it stand upright for approximatel y 2 hours.
This will reduce the possibility of a malfunction in the cooling system from handling during
transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
• Install the handle on the door. (See page 9.)
INSTALLATION OF YOUR APPLIANCE
• The appliance is designed for built-in or recessed or free standing installation for indoor or outdoor
use.
• CAUTION
• Place your appliance on a floor that is strong enough to s upport it when it is full y loaded. To lev el the
unit, adjust the front le velin g legs.
• For free standing installation, 5 inches (127mm ) of space b etween the bac k and sides of the unit are
suggested, which allows the proper air circulation to cool the com pressor and condenser. Even for
built-in installation, you should provide the following clearances to ensure the best operation and
proper ventilation: 3/16” on both sides, 2” at the rear and 1/16” at the top. Take care that the air vent at
the front of the appliance is never covered or blocked in any way.
• NOTE: It is recom m ended t hat you do not insta ll the a ppliance near an o ven, r adi ator or other he ating
source. Direct sunlight may affect the acrylic coating and heat sources may increase electrical
consumption. Don’t install in a location where the temperature will fall below 44°F (7°C). For best
performance, do not install the appliance behind a cabinet door or block the base grille.
• Avoid locating the unit in moist areas.
• Plug the appliance into an exclusive, properly grounded wall outlet. Do not unde r any circumstances
cut or remove the third (ground) pro ng from the power cord. An y questions concerning power an d/or
grounding should be directed toward a certified electrician or an authorized service center.
ELECTRICAL CONNECTION
Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is
damaged, have it replaced by a qualified electrician or an authorized service center.
This appliance should be properly grounded for your safety. The power cord of this appliance is equipped
with a three-prong pl ug which mates w ith standard three-prong wall outlets to minimize the poss ibility of
electrical shock.
: This appliance is not designed for the storage of medicine or other medical products.
WARNING
Do not under any circumstances cut or remove the third (ground) prong from the power cord supplied. For
personal safety, this appliance must be properly grounded.
This appliance requires a s tandard 115/12 0 Volt AC ~ 60Hz three-prong grounded electrical outlet. Have
the wall outlet and circu it checked b y a qualified electric ian to make s ure the outlet is pr operly grounde d.
When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation to have it
replaced with a properly grounded 3-prong wall out let.
To prevent accidental injur y, the cord should be sec ured behind the appliance an d not left exposed or
dangling.
8
The appliance should a l ways be p lug ged int o its o w n indi vi dua l electrical outlet which has a v oltage rating
that matches the rating label on the appliance. This provides the best performance and also pr events
overloading house wiring circuits that could cause a fire hazard from overheating. Never unplug the
appliance by pulling on the power cord. Always grip the plug firmly and pull straight out from the
receptacle. Repair or replace immediately all power cords that have become frayed or otherwise
damaged. Do not use a cord that shows cracks or abrasion dam age along its length or at either end.
When moving the appliance, be careful not to damage the power cord.
EXTENSION CORD
Because of potential safety hazards under certain conditions, it is strongly recommended that you do not
use an extension cord with this appliance. However, if you must use an extension cord it is absolutely
necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord having a grounding
type plug and outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes.
REVERSING THE DOOR SWING OF YOUR APPLIANCE
This unit has the capability of the door opening from either the left or right side. The unit is delivered to
you with the door opening from the left side. Should you desire to reverse the opening direction, please
follow the reversal instructions shown below.
NOTE: All parts removed must be saved to allow the door swing to be reversed.
1. Remove the bottom hinge (2) b y unscrewing the four lock screws (1). Be careful to hold the door
firmly after removing the screws. (Fig. 1)
2. Gently pull down to rem ove the door from the right top hinge and plac e it on a padded surface to
avoid the risk of damage. Then remove the right top hinge (7). (Fig. 2 & 3)
3. Unscrew and transfer pins (4) and (3) of the hinge plate to the opposite side. (Fig. 1)
4. Pop out the cover caps on the l eft side of cabinet an d use them to cover the sc rew holes on the right
hand side.
5. Screw the alternative left top hinge (8), included in the fittings, on the left hand side of cabinet. (Fig. 3)
9
6. Relocate the door to the designated position. Then screw the bottom hinge assembly on the left
Handle
Door
Screw
designated position and tighten it after the door is leveled. (Fig. 1)
7. Remove the handle from the left side of the door and install it on the right side. (See next section.)
INSTALLING THE STAINLESS STEEL HANDLE
This appliance includes a stainless steel handle that is not required to
operate the unit. To install the handle, follow the instructions below:
1. Use a screwdriver to remove the screws on the side of door
where the handle is to be installed.
2. Align the handle with the screws removed in step # 1. Tighten the
screws using a Phillips head screwdriver until the handle is both
flush and secured tightly against the door side. (DO NOT overtighten as this will cause damage to the stainless steel door
surface.)
OPERATING YOUR APPLIANCE
It is recommended you install the appliance in a place where the ambient temperature is between 44º and
106ºF (7º - 41ºC). If the ambient temperature is above or below the recommended temperatures, the
performance of the unit may be affected. For example, placing your unit in extreme cold or hot conditions
may cause interior temperatures to fluctuate. The operating temperature range m a y not be reached.
CONTROL PANEL for SPR315OS/SPR626OS
ON/OFF Power
To turn the appliance ON or OFF, touch the symbol and hold for 5 seconds.
NOTE: Pressing the POWER key once can switch off the audible alarm when the alarm is on.
LIGHT
To control the inner light turn on/off.
UP
Used to increase (warm) the set temperature b y 1°C/1ºF.
DOWN
Used to decrease (cool) the set temperature by 1°C/1ºF.
10
ºF/ºC Selector
Select the temperature display setting in Fahrenheit or Celsius degree. To change the temperature
from Fahrenheit to Celsius or from Celsius to Fahrenheit, press and hold the LIGHT key for 5 seconds.
Setting the Temperature Control
• You can set the temperature by touching the UP and DOWN symbols. When you push the two
buttons for the first time, the LED readout will show the original temperature set previously. (The
temperature preset at the factory is 38°F (3°C).
• The temperature you are setting will increase by one degree each time you touch the UP
symbol, and will decrease by one degree each time you touch the DOWN symbol.
• The range of the temperature control is from 36°F to 43°F.
• To view the set temperature at any time, touch the UP or DOWN symbol. The set temperature
will flash in the display window for 5 seconds. After 5 seconds, the temperature inside the unit
will reappear in the display window.
Interior Light
• The interior light makes it easy to view your items. Touching the LIGHT mark toggles between 2
modes of operation for the internal light: functional (default) mode and showcase mode. If you
are in functional (default) mode, the light will turn on only when the door is open. If you are in
showcase mode, the light will be on whether or not the door is open.
CONTROL PANEL for SCFF51OS
ON/OFF Power
To turn the appliance ON or OFF, press and hold the POWER
NOTE: Pressing the POWER key once can switch off the audible alarm when the alarm is on.
SuperFreeze
SuperFreeze is used to freeze fresh food quickly. The function overrides the thermostat control and
will make the compressor operate continuously. It is not necessary to adjust the thermostat setting
when using this function. When the function is selected, the SuperFreeze indicator will be ON. The
function can be exited by pressing the key again and the indicator will turn OFF. Super Freeze will
turn off automatically after 8 hours.
UP
Used to increase (warm) the set temperature by 1°C/1ºF.
DOWN
Used to decrease (cool) the set temperature by 1°C/1ºF.
key for 5 seconds.
11
ºF/ºC Selector
Select the temperature display setting in Fahrenheit or Celsius degree. To change the temperature
from Fahrenheit to Celsius or from Celsius to Fahrenheit, press and hold the SUPERFREEZE key
for 5 seconds.
Setting the Temperature Control
• You can set the temperature by pressing the UP and DOWN keys. When you press the two
keys for the first time, the LED readout will show the original temperature set previously. (The
temperature preset at the factory is 0°F (-18°C).
• The temperature you are setting will increase by one degree each time you press the UP key,
and will decrease by one degree each time you press the DOWN key.
• The range of the temperature control is from -11°F to 11°F.
• To view the set temperature at any time, press the UP or DOWN key. The set temperature will
flash in the display window for 5 seconds. After 5 seconds, the temperature inside the unit will
reappear in the display window.
Interior Light
The unit is equipped with an interior LED light which will be turned ON when the door is open.
NOTE:
•If the unit is unplugged, or power is lost or turned off, you must wait 3 to 5 minutes before
restarting the unit. If you attempt to restart before this time delay, the unit will not start.
•When you use the unit for the first time or restart the unit after it has been shut off for a long time,
there could be a few degrees variance between the t e mperature you select and the one indicated
on the LED readout. This is normal and is due to the length of the deactivation time. There should
not be a problem once the unit has been running for a few hours.
SABBATH MODE
Sabbath mode is available for the observance of certain religious holidays. This mode turns off the
displays, interior light and audible alarms and prevents them from turning on again. Normal cooling
operations will still take place.
To initiate Sabbath mode, press the POWER and LIGHT keys at the same time for at least 5 seconds for
SPR315OS/SPR626OS or press the POWER and SUPERFREEZE keys at the same time for at least 5
seconds for SCFF51OS. The indicator light will flash four times and confirm the Sabbath mode is ON.
Sabbath mode can be exited by repeating the abo ve process. The Sabbath Mode will automaticall y turn
off after 96 hours.
TEMPERATURE MEMORY FUNCTION
•In the event of a power interruption (power surge, breaker switch, etc.), the unit can remember the
previous temperature settings, and when the power is recovered, the cabinet temperature will return
to the same setting temperature as before the power went off.
DEFROSTING
• The unit defrosts automatically in normal operating conditions.
12
• The evaporator behind the rear wall of the unit defrosts automatically. The condensate collects in the
drainage channel behind the rear wall of the unit, and flows through the drainage hole into the drip tray
by the compressor where it evaporates.
• However, frost may accumulate on the evaporator if the unit is repeatedly opened in a high heat or high
humidity location. If this frost pattern do es not clear wit hin 24 hours, your unit will require manual
defrosting.
USING THE FREEZER
•Model SCFF51OS is designed for the long-term s torage of frozen food. Storage time is up to three
months.
• The storage life of frozen foods varies and the recommended storage time should not be exceeded.
• Pre-packed commercially frozen food should be stored in accordance with the frozen foods
manufacturer’s instructions for a three star frozen food storage compartment or home freezer.
•Place frozen food int o the freezer as quic kly as possible after purchase. If th ere are instructions on
the packet, carefully follow these instructions regarding storage times.
TEMPERATURE AL ARM / DOOR ALARM
•An audible alarm sounds if the storage temperature is not cold enough. The temperature display
flashes at the same time.
•The cause of the temperature being too high may be:
– Warm fresh food was placed inside
– Too much warm ambient air flowed in when rearranging and removing food
– Power failure for some time
– The appliance is faulty
•The audible alarm is automatically silenced and the temperature display stops flashing when the
temperature is sufficiently cold again.
•If the door has been left open for more than 60 seconds, the alarm will sound. Pressing the POWER
key once can switch off the audible alarm.
DOOR LOCK
Your unit is provided with a lock and key combination.
The keys are located inside the plastic bag that contains the Instruction Manual. Insert the key into the
lock and turn it counterclockwise to unlock the door. To lock the door, do the reverse operation, making
sure the metal pin is engaged completely. Remove the key and put it in a secure place for safekeeping.
SHELVES
To prevent damaging the door gasket, make sure to have the door all the way open when pulling the
shelves out of the rail compartment.
• Any of the shelves can be removed to store larger items.
• When removing the shelf out of the rail compartment, make
sure to remove all items first. Then move the shelf to the
position where the notch of the shelf is exactly under the
plastic post and lift the shelf. In order to replace the shelf,
repeat steps described above in reverse.
13
CARE AND MAINTENANCE
CLEANING YOUR APPLIANCE
• Turn off the power, unplug the appliance, and remove all items, including shelves.
• Wash the inside surfaces with a solution of warm water and baking soda (about 2 tablespoons of
baking soda to a quart of water).
• Wash the shelves with a mild detergent solution.
• Wring excess water out of t he s pon ge or c lot h when c l ean ing the area where t he contr ols ar e l oc ate d,
or any electrical parts.
•Wash the outside cabin et with warm water and m ild liquid deterge nt. Rinse we ll and wipe dr y with a
clean soft cloth.
•Use an approved st ainless steel cleaner t o clean the door and hand le. Do not use s teel wool or a
steel brush on the stainless steel.
CAUTION:
Failure to unplug t he appliance during cleaning could re sult in electrical shock or other personal injury
POWER FAILURE
Most power failures are corrected within a few hours and should not affect the temperature of your
appliance if you m inimize the number of times the do or is opened. If the power is go ing to be off for a
longer period of time, you need to take the proper steps to protect the contents.
VACATION TIME
• Short vacations: Leave the appliance operating during vacations of less than three weeks.
• Long vacations: If the appliance will not be used for several m onths, remove all items and tur n off
the appliance. Clean and dry the interior thorough ly. To prevent odor and m old growth, leave the
door open slightly, blocking it open if necessary.
MOVING YOUR APPLIANCE
1. Remove the contents.
2. Securely tape down all loose items (shelves) inside your appliance.
3. Turn the adjustable legs up to the base to avoid damage.
4. Tape the door shut.
5. Be sure the appliance stays secure in the upright position during transportation. Also, protect the
outside of the appliance with a blanket or similar item.
ENERGY SAVING TIPS
•The appliance should be lo cated in the coo lest area of the room or outdoor location, awa y from heat-
producing appliances and out of direct sunlight.
• Ensure that the unit is adequately ventilated. Never cover air vents.
• Do not keep the door open any longer than necessary.
• Let hot foods cool to room tem perature before placing in the unit. Overloading the uni t forces the
compressor to run longer.
•Be sure to wrap foo ds properly, and wipe contai ners dry before placing them in the unit. This cuts
down on frost build-up inside the unit.
•Unit shelves and storag e bins should not be lined with aluminum foil, wax paper , or paper toweling.
Liners interfere with cold air circulation, making the unit less efficient.
•Organize and label food to reduce door openings and extended searches. Remove as many items as
needed at one time, and close the door as soon as possible.
.
14
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
REMEDY
fuse.
dusty.
dust.
replace.
panel.
Switch on the light.
adjustable feet.
The rattling noise may come from the flow of the refrigerant, which is normal. As each
cause popping and cracking noises.
adjustable feet.
The shelves are out of position.
Check the shelves and refit correctly.
You can solve many common problems easily, saving you the cost of a possible service call. Try the
suggestions below to see if you can solve the problem before calling the servicer.
Troubleshooting Guide
Appliance
does not
operate.
Appliance is
not cold
enough.
Appliance
turns itself on
and off
frequently.
• Appliance is not connected to a power
supply.
• The appliance is turned off.
• Tripped circuit breaker or a blown fuse.
• The temperature is not set correctly.
• The ambient temperature could require
a lower temperature setting.
• The door was opened too often.
• The door was not closed completely.
• Door is not hermetically sealed.
• The condenser is too dirty.
• The ventilation opening is b locked or too
• The room temperature is higher than
average.
• A large amount of food has been added
to the unit.
• The door is opened t oo of ten.
• The door is not closed completely.
• The door gasket does not seal properly.
• Connect the appliance.
• Switch on the appliance.
• Switch on circuit breaker or replace
• Check the set temperature.
• Set a lower temperature.
• Do not open the door more often than
necessary.
• Close door properly.
• Check the door seal and clean or
replace.
• Clean the condenser when necessary.
• Clear the obstructions and clean the
• Put the appliance in a cooler place.
• Leave the appliance to work for a
while until the set temperature has
been reached.
• Do not open the door more often than
necessary.
• Close door properly.
• Check the door seal and clean or
•
Appliance not connected to power supply.
The light does
not work.
Vibrations
The appliance
seems to
make too
much noise.
The door will
not close
properly.
• Tripped circuit breaker or a blown fuse.
• The light was switched off on the control
• The appliance is not properly level.
cycle ends, you may hear gurgling sounds caused by the flow of refrigerant in your
appliance.
If temperature fluctuations occur, the contraction and expansion of the inner walls may
• The appliance is not properly level. • Level the app lianc e with the
• The appliance is not properly level.
• The door was reversed and not properly
installed.
• The gasket is dirty.
•
• Connect the appliance.
• Switch on circuit breaker or replace
fuse.
•
• Level the appliance with the
• Level the appliance with the
adjustable feet.
• Check the door hinge and reassemble
correctly.
• Clean the door gasket.
•
15
Display “E1” or
“E2”.
• The air temperature sensor has failed. • Call for service.
Has the appliance door been open for
been added to the unit.
If yes, close the door.
displayed instead. This is normal.
longer than 60 seconds? If not, then the
temperature has risen higher or fallen
The alarm
sounds and
the
temperature
display
flashes.
The icon “--” is
lit and flashing
in the
temperature
display.
If you've checked the table above and find that you still need help with your appliance, call our Customer
Service facility at
questions.
lower than the temperature that has been
set. This could be due to:
• The appliance door being opened too
often.
• The ventilation opening being covered
or too dusty.
• A lengthy interruption to the power
supply.
• A large amount of food or beverage has
• The display temperature is out of range.
800-932-4267 between 9:00AM and 5:00PM ET. We will do our best to answer your
• Do not open the door more often than
necessary.
• Clear the obstructions and clean the
dust.
• Leave the appliance to work for a
while until the set temperature has
been reached.
• Only temperatures within the range
0~99°F/-9~37°C for SPR315OS /
SPR625OS and the range -49~99°F/
-45~37°C for SCFF51OS can be
displayed. If the temperature is not
within this range, the icon “--” will be
16
LIMITED WARRANTY
For parts and accessory ordering,
FELIX STORCH, INC.
WARNING! This product may contain chemicals known to the state of California
Printed in China
ONE-YEAR LIMITED WARRAN TY
Within the 48 contiguous United States, for one year from the date of purchase, when this appliance is operated and
maintained according to instructions attached to or furnished with the product, warrantor will pay for factory-specified
parts and repair labor to correct defects in materials or workmanship. Service must be provided by a designated
service company. Outside the 48 states, all parts are warranted for one year from manufacturing defects. Plastic
parts, shelves and cabinets are warranted to be manufactured to commercially acceptable standards, and are not
covered from damage during handling or break age.
5-YEAR COMPRESSOR WARRANTY
1. The compressor is covered for 5 years.
2. Replacement does not include labor.
ITEMS WARRANTOR WILL NOT PAY FO R:
1. Service calls to correct the installation of your appliance, to instruct you how to use your appliance, to replace or
repair fuses or to correct wiring or plumbing.
2. Service calls to repair or replace appliance light bulbs or broken shelves. Consumable parts (such as filters) are
excluded from warranty coverage.
3. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation,
installation not in accordance with electrical or plumbing codes, or use of products not approved by warrantor.
4. Replacement parts or repair labor costs for units operated outside the United States.
5. Repairs to parts or systems resulting from unauthorized modificatio ns made to the applia nc e.
6. Expenses for travel and transportation for product service in remote locations.
7. The removal and reinstallation of your appliance if it is installed in an inaccessible location or is not installed in
accordance with published inst allat ion instru ctio ns.
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT
REPAIR AS PROVIDED HEREIN. IMPLIED WARRANTIES, INCLUDING W ARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR. WARRANTOR SHALL NOT BE
LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF INCIDENTAL OR CONSEQUEN TIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS, SO THESE EXCLUSIONS OR LIMITATIONS MAY
NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE
OTHER RIGHTS, WHICH VARY FROM STATE TO STATE.
to cause cancer or birth defects or other reproductive harm. For more information,
visit: www.summitappliance.co m/prop 65
Chemicals known by the manufacture r to be pre s ent in this product in conce ntrations
higher than threshold l imits: NONE.
770 Garrison Avenue
Bronx, NY 10474
Phone: (718) 893-3900
Fax: (718) 842-3093
www.summitappliance.com
troubleshooting and helpful hints, visit:
www.summitappliance.com/support
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.