Summit SBC58BBIWKDTWINADA Accessories

WINE DISPENSER TAP KIT INSTRUCTIONS

Wine

Dispenser

Tower

Wine Line

(NSF-certified

Barrier Tubing)

High-Pressure Valve Gas Canister Shut Off Safely

Double Gauge Gas Regulator Low Pressure Valve

Gas Line

Gas Tank

1/6 Barrel Wine Keg

(Not Included)

23⅜”

9¼”

Wine Keg

Dimensions

WINE KEG DISPENSER FLOW AND PARTS

WINE KEG DISPENSER ASSEMBLY

Wine Dispenser Tower

Wine Duct

Be sure you have a thorough familiarity with the assembly and installation process before turning on your wine keg dispenser.

NOTE: Once casters are assembled, place your unit in an upright position and allow it to sit for at least 8-10 hours before plugging into an outlet. This will allow the refrigerant to settle before operation.

Caster Assembly

1. Remove everything from the cabinet and lay the unit on a clean, dry and padded surface.

2. Install casters into holes on bottom of unit as shown and tighten with a wrench. Two of the four casters provided are equipped with locks to prevent slippage of the unit on smooth surfaces such as hardwood floors, linoleum or tile. These

casters should be installed on the front of the unit.

3. Once all four casters are attached, return the wine keg dispenser to an upright position and allow to remain for at least 8-10 hours. (See Note above.)

Guardrail Installation

To install the guardrail,

1. Place the guardrail on top of the wine keg dispenser and line up the feet of the guardrail with the holes on top of the cabinet.

2. Using the screws provided, secure each foot to the cabinet.

Wine Tap Installation

To install the wine tap, first line up the draft arm notches with the notches in the hole in the top of the wine keg dispenser. Feed the arm into the hole, making sure that the notches are aligned properly. Slide arm down and twist until the arm is secure. (No screws or fasteners are necessary.)

While not required, we recommend the use of the black rubber gasket when installing the wine tap. Using the gasket will provide a more secure seating for the arm assembly. (See figures A, B and C in the next column.)

+ 3 hidden pages