Summit PED12 Instruction Manual

Pedestal Assembly Instructions

Rear of pedestal showing

Bracket 1 mounted

Bracket 2 reversed

Front legs of refrigerator

Refrigerator mounted on

under Bracket 1

for SUMMIT® Refrigerator-Freezers CP35, FF71, FF73 and FFBF49A

Following the instructions below to mount the refrigerator correctly on the pedestal will keep
your appliance from tipping forward.

NOTE: Do not move pedestal into its final location until the last step.

1. Mount Bracket 1 to the position on the floor where the refrigerator will eventually be placed.

2. Reverse Bracket 2 which has been pre-mounted to the pedestal.

3. Mount refrigerator over the lip at front of pedestal and under bracket 2 as shown below.

4. Adjust lip of pedestal and tighten 4 screws to hold it in place.

5. Slide pedestal into final location so that it fits under the prongs of Bracket 1.
This completes the assembly.

pre-mounted Bracket 2

to the floor

Summit Appliance Division · Felix Storch, Inc. · www.summitappliance.com · 718-893-3900 · [e-mail]

pedestal and positioned

are positioned behind lip

of pedestal