Summit FFRF3075WCSS, FFRF3070BSS, FFRF3075WSS Installation Manual

Instructions for Integrated Frame

(Built-In Application)

DETAIL A

Step 8

Top Hinge

Step 7

Top Brace

Frame

Bottom Pc

Door Panel 23 5/16" x 28 1/4" FF7 19 1/2" x 31 1/2" FF511 14 5/8" x 30" SCR1536B SWC1535B

Step 4

DETAIL B

Step 6

Bottom Brace

1) Remove Door from Chassis by unscrewing 3 screws in Top Hinge and 2 screws in Bottom Hinge. Keep screws, discard hinges.

2) Attach customer supplied handle to Door Panel using countersunk screws.

3) Screw Door panel to Frame using 14 screws.

4) Slide Frame over Refrigerator door and attach with 1 screw on each side, center of door.

5) Screw Bottom Pc to Door with 2 screws.

6) Attach Top Brace to Frame with 1 screw on side. Attach Bottom Brace in the same manner.

7) Drill a hole thru the Top and Bottom Frame using the Braces as a guide with a 5/32" drill bit. Install screws to finish attaching the Top and Bottom Braces securely to the Frame.

8) Drill a hole into the Door Panel from the top and bottom using the Braces as a guide with a 1/4" drill bit. Do not exceed 5/8". This is the hole that the door will pivot on.

9) Remount the door using the supplied Top and Bottom Hinges.

Summit Appliance 1-718-893-3900

Hinge FF7 or SCR1536B SWC1535B

Hinge FF511