Summit FFBF249SSBIIM, FFBF249SSBIIMLHD, FF1422SSRHIM, SCFF53BXSSHVIM, SCFF53BXSSHHIM Quick Guide

1

QUICK START GUIDE

WATER LINE CONNECTION FOR
INSTALLED (MODULAR) ICEMAKERS

NOTES:

• This manual provides instructions on how to connect a water line to an icemaker already

installed on your Summit refrigerator. Please read the manual carefully and follow the
instructions exactly as described, observing all safety instructions.

• A certain amount of mechanical ability is required to complete the water connection

process.

• You will have to purchase a ¼” OD copper tubing kit. The kit contains all the hardware

necessary to connect your icemaker to the water supply, including the regular valve
(NOTE: valve should only be installed in a cold water supply). You can purchase one at
most hardware or plumbing supply stores.

• DO NOT USE PIERCING-TYPE OR 3/16” SHUT-OFF VALVES. They reduce the flow of water

to the icemaker and are easily clogged.

• CUSTOMER INSTALLATION IS NOT WARRANTED BY THE REFRIGERATOR OR ICEMAKER

MANUFACTURER.

Summit Appliance, Div. of Felix Storch, Inc. · Bronx, NY 10474 · Tel: [phone] · Fax: [phone]

2

Forming the copper tubing:

Loop the copper tubing coming from the water valve as shown. Position the coiled copper
tubing near the center of the unit so that it forms an “accordion-fold” (as shown in the diagram
below) for when the refrigerator is moved to and from the wall.

Summit Appliance, Div. of Felix Storch, Inc. · Bronx, NY 10474 · Tel: [phone] · Fax: [phone]