Summit CR4B242BL Maintance Manual
INSTRUCTION MANUAL
MODE D’EMPLOI
4-Burner Electric Cooktop
Table de cuisson électrique à 4 brûleurs
Models/Modèles
CR4B240BL / CR4B242BL / CR4B241WH / CR4B243WH
Felix Storch, Inc.
Summit Appliance Division
ISO 9001:2015 registered
770 Garrison Avenue
Bronx, NY 10474
www.summitappliance .com
P21241R02
Page 1
Please read these instructions in their entirety before installation and use of your
Model Number
CR4B240BL / CR4B241WH
CR4B242BL / CR4B243WH
Description
4-burner ceramic glass electric cooktop
Electrical Requirements
230V AC, 21A, 60Hz
Power Rating of Burners
5400W
6000 W
Diameters of Burners
3 heater zone @ 5.5" / 1 heater zone @ 7"
2 heater zone @ 5.5" / 2 heater zone @ 7"
Overall Dimensions
23 7/8" x 20 3/8" x 4 3/8" (with knobs)
Cutout Dimensions
cooktop. SAVE THIS MANUAL FOR FUTURE REFERENCE.
Table of Contents
Technical Information ......................................................................................... 1
Safety Instructions ......................................................................................... 2 - 3
Installation Instructions ................................................................................. 4 - 9
Unpacking the Cooktop ............................................................................. 4
Checking the Electrical Supply Requirements ........................................... 4
Preparing the Countertop ..................................................................... 5 - 6
Installing the Cooktop ................................................................................ 7
Electrical Connection and Wiring Diagram ................................................ 8
Final Preparations Prior to Use ................................................................. 9
Operation ...................................................................................................... 9 - 10
Cookware .................................................................................................. 9
Heating Elements ............................................................................... 9 - 10
Controls & Indicators ............................................................................... 10
Cleaning .................................................................................................. 10
Warranty ........................................................................................................... 11
Technical Information
22 1/8" x 19 3/8" with 1/2" radius
For future reference, please record the Serial Number
of your cooktop here:
Page 2
SAFETY INSTRUCTIONS
•
•
•
•
•
•
•
•
•
•
•
Read this section BEFORE operating the cooktop.
This cooktop, like all appliances, has the potential to create safety
problems through careless and improper use. Please observe all of
the following safety precautions.
Proper Installation
Be sure your appliance is properly installed and grounded by a qualified
technician.
Never use your appliance for warming or heating the room.
Do not leave children alone.
Children should never be left alone or unattended in the area where the
appliance is in use. They should never be allowed to sit or stand on any part
of the appliance.
CAUTION: Do not store items of interest to a child in cabinets above
cooktop.
Children climbing on the cooktop to reach such items could be seriously
injured.
Wear proper clothing/apparel.
Loose-fitting or hanging garments should never be worn while using the
appliance.
User Servicing
Do not repair or replace any part of the appliance. If service ever becomes
necessary, this appliance should be serviced by AUTHORIZED
PERSONNEL ONLY or call SUMMIT Customer Service at 1-800-932-4267.
Keep flammable materials away from the cooktop.
Do not store plastic material (such as plastic utensils) in storage areas
beneath cooktop.
Plastic items with low melting temperatures should not be stored under, over
or near the cooktop.
Do not soak removable heating elements.
Heating elements should never be immersed in water.
Do not use water on grease fires.
Smother fire or flame or use dry chemical or foam-type extinguisher.
Use only dry potholders.
Damp potholders on hot surfaces may result in burns from steam. Do not let
Page 3
potholder touch the heating elements on the appliance. Do not use a towel
or other bulky cloth in place of a potholder.
•
Do not cook on a broken cooktop.
If your cooktop should break, cleaning solutions and spillovers may penetrate
the broken cooktop and create a risk of electric shock. Immediately contact
an authorized service center or call the SUMMIT Customer Service at 1-800-
932-4267.
•
Clean cooktop with caution.
If a wet sponge or cloth is used to wipe spills on a hot cooking surface, be
careful to avoid steam burns. Some cleaners produce noxious fumes if
applied to a hot surface. Read the cleaner label for details prior to use.
•
DO NOT TOUCH HEATING ELEMENTS.
The heating elements on the cooktop may be hot even if they are dark in
color. These areas may be hot enough to cause burns. Never touch heating
elements until they have had sufficient time to cool. Likewise, never allow
clothing or flammable materials to come in contact with heating elements or
the cooktop surface until they have had sufficient time to cool. Other
surfaces of the appliance may become hot enough to cause burns.
•
Use proper pan size.
This appliance is equipped with four surface units, with a diameter of 5.5"
and 7". Select utensils having flat bottoms large enough to cover the surface
unit heating element. The use of undersized utensils will expose a portion of
the heating element to direct contact and may result in ignition of clothing.
Proper relationship of utensil to burner will also improve efficiency.
•
Never leave surface units unattended at high heat settings.
Boil-over causes smoking and greasy spillovers that may ignite.
•
Utensil handles should be turned inward and not extend over adjacent
surface units.
To reduce the risk of burns, ignition of flammable materials, and spillage due
to unintentional contact with the utensil, the handle of a utensil should be
positioned so that it is turned inward, and does not extend over adjacent
surface units.
•
Glazed cooking utensils
Only certain types of glass, glass/ceramic, ceramic, earthenware, or other
glazed utensils are suitable for range-top service without breaking due to
sudden changes in temperature.
- SAVE THESE INSTRUCTIONS -
Page 4
!
!
!
Model Number
CR4B240BL / CR4B241WH
CR4B242BL / CR4B243WH
Maximum Connected Load
5400 W
6000 W
Required Power Supply Input
230V AC / 21A / 60Hz
Installation Instructions
IMPORTANT!
1. Unpacking the Cooktop
Carefully unpack the cooktop from its shipping container. If possible, keep the
original shipping carton and protective packaging in the event the unit has to be
returned for service.
Verify the package contents. If the ceramic glass cooktop appears to be
damaged or parts are missing, call SUMMIT immediately.
Save this manual for review by local inspector.
This appliance must be properly installed and
grounded by a qualified technician.
Important! Do not remove the clear plastic covering
film on the ceramic glass until the cooktop is ready
to be installed.
2. Checking the Electrical Supply Requirements
This product must be installed in accordance with national, state and local
electric codes. Here are the electrical requirements:
The supply must be from an individual grounded circuit that is protected by a
circuit breaker and rated per the specifications as shown above.
Warning: If the electric power supply does not meet
the product specifications, consult with a licensed
electrician before proceeding with installation.
Page 5
Warning
!
3. Preparing the countertop
Please read this section prior to making a cutout in your counter for the
cooktop.
It is important to plan ahead for installation of the cooktop, keeping the following
dimensions in mind. (Please refer to Fig. A.)
A. Maximum depth of overhead
cabinets should be 13 inches.
B. Minimum height of the countertop
above the floor should be 36
inches.
C. Minimum flat countertop surface
that the cooktop will rest upon must
be equal to or greater than the
overall cooktop dimensions. (Refer
to page 1 for these dimensions.)
D. Minimum clearance between the
top of the cooking surface and the
bottom of an unprotected wood or
metal cabinet should be 30 inches.
When the bottom of a wood or
metal cabinet is protected by not
less than ¼ inch thick flameretardant millboard covered with
not less than No. 28 MSG sheet
steel, 0.015-inch-thick stainless
steel, 0.024-inch-thick aluminum or
0.020-inch-thick copper, the minimum clearance should be 24 inches.
E. The distance from the backsplash of the countertop to the edge of the
ceramic glass of the cooktop should be a minimum of 2 inches. The distance
from a side wall to the edge of the ceramic glass of the cooktop should be a
minimum of 1 inch. (Refer to page 1 for overall cooktop dimensions).
Do not install the cooktop closer than 1 inch (25 mm) from any adjacent
surface.
WARNING: To eliminate the risk of burns when
reaching over heated surface units, avoid having
cabinet storage space located above surface units.
If cabinet storage is to be provided, the risk can be
reduced by installing a range hood that projects
horizontally a minimum of 5" beyond the bottom of
the cabinets.
Page 6
CR4B240BL
Before making the countertop cutout, check for clearance. See if the cooktop will
PRODUCTS
A
B
CR4B240BL
CR4B241WH
CR4B242BL
CR4B243WH
clear the front and side walls of the base cabinet. It is also important to provide
enough ventilation.
Adequate ventilation of the space below the countertop must be provided to
ensure proper operation of the cooktop. Heat transferred from the cooktop
bottom pan during operation will overheat an improperly ventilated area.
Allow a 2" (51mm) minimum clearance between the bottom of the metal pan of
the cooktop and any combustible surface located below, e.g., the upper edge of
a drawer installed below the cooktop. Failure to provide proper clearances and
ventilation may result in a fire hazard.
Countertop cutout dimensions are shown in the figure below.
22 1/8"
22 1/8"
22 1/8"
22 1/8"
19 3/8"
19 3/8"
19 3/8"
19 3/8"
Note: When making the countertop, put a radius at the corners of the cutout (a
radius of ½" is typical). This will keep the countertop from cracking.
Follow the countertop manufacturer's instructions regarding the minimum
corner radius and reinforcement of corners.
Page 7
4. Installing the Cooktop
PRODUCTS
A
CR4B240BL
CR4B242BL
CR4B241WH
CR4B243WH
The cooktop should be bedded to the countertop using a soft bedding compound
that will prevent damage if later removal for service is necessary. A very small
bead of silicone sealant should be laid around the edges of the cutout.
22 1/8"
22 1/8"
22 1/8"
22 1/8"
Installation of the
cooktop into the
countertop
Place the cooktop in the cutout opening and press firmly on all sides to seal the
frame into the bedding compound. The sealant will hold the cooktop firmly in
place on the countertop.
Loading...