Summit CR1115 User Manual

INSTRUCTION MANUAL

for Ceramic Glass

Electric Cooktop Models

CR1115 CR2110 CR2220 CR3240

Felix Storch, Inc.

Summit Appliance Division

An ISO 9001:2008 registered company

770 Garrison Avenue

Bronx, NY 10474

www.summitappliance .com

Please read these instructions in their entirety before

installation and use of your cooktop.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

Table of Contents

Product Specifications ...................................................................................... 2

Installation Instructions for Ceramic Glass Cooktops ............................. 3 - 10

Step #1: Unpacking the Cooktop .......................................................... 3 - 4

Step #2: Check the Electrical Supply Requirements ................................. 4

Step #3: Countertop Preparation .......................................................... 5 - 7

Step #4: Installing the Cooktop ............................................................ 8 - 9

Step #5: Electrical Connection ................................................................ 10

Step #6: Final Preparations Prior to Use ................................................. 10

Safety Instructions ..................................................................................... 11 - 12

Operation ................................ ................................ ................................ .... 13 - 14

Cookware ................................................................................................. 13

Heating Elements ..................................................................................... 13

Controls & Indicators ................................................................................ 14

Cleaning ............................................................................................................. 14

Warranty ............................................................................................................ 15

Product Specifications

Single Burner

CR1115: 120V AC – one 6” (140 mm) burner @ 1200 watts Overall dimensions: 11¾” x 12⅝” x 2⅛”

(300 mm x 320 mm x 55,3 mm) Cutout dimensions: 11⅛” x 11⅞”

(282 mm x 302 mm)

Double Burner

CR2110: 120V AC – two 6” (140 mm) burners @ 1200 watts each CR2220: 220V AC – two 6” (140 mm) burners @ 1200 watts each

Overall dimensions: 11¾” x 19⅝” x 2⅛” (300 mm x 500 mm x 55,3 mm)

Cutout dimensions: 11⅛” x 19¼” (282 mm x 490 mm)

Triple Burner

CR3240: 220V AC - three 6” (140 mm) burners @1200 watts each

Overall dimensions: 19⅛” x 20⅝” x 2⅛” (485 mm x 525 mm x 55,3 mm)

Cutout dimensions: 18¼” x 19⅞” (463 mm x 505 mm)

Contour Cooktop

Cooktop carrier

IMPORTANT

Save this documentation for review by local inspector.

This appliance must be properly installed and grounded by

a qualified technician.

Mounting brackets

Mounting screws

Seal

Installation Instructions

for Ceramic Glass Cooktops

Step #1

Unpacking the Cooktop Carefully unpack the cooktop from its shipping container. If possible, retain

the original shipping carton and protective packaging in the event the unit ever has to be returned for service.

Verify and identify the package contents. The following items should be included in the carton. If any components are missing or damaged, call SUMMIT immediately.

● Ceramic glass cooktop

● Mounting brackets (2 pcs. for Single and Double Burners –

4 pcs. for Triple Burners)

● Mounting screws (2 pcs. for Single and Double Burners –

4 pcs. for Triple Burners)

● Cooktop carriers (4 pcs. for Single, Double and Triple Burners)

● Mounting screws for cooktop carriers (8 pcs. for Single, Double and Triple

Burners)

● Self-adhesive sealant strip

Fig. 1

SUMMIT

Model #

Maximum

Connected

Load

Required

Power Supply

Input

Minimum

Wire Size

CR 1115

1200 Watts

120V

AC/10A/60Hz

#16 AWG

CR 2110

2400 Watts

120V

AC/25A/60Hz

#12 AWG

CR 2220

2400 Watts

220V

AC/10A/60Hz

#16 AWG

CR 3240

3600 Watts

220V

AC/15A/60Hz

#16 AWG

WARNING: INSTALLATIONS MUST COMPLY WITH ALL LOCAL,

STATE AND NATIONAL ELECTRICAL CODES.

Failure to comply with the applicable codes may result in fire, property damage, personal injury or death.

If the electric power supply does not meet the product specifications, consult with a licensed electrician before proceeding with installation.

For future reference, please record the serial number of your cooktop here:

___________________________________________

Step #2

Check the Electrical Supply Requirements This product must be installed in accordance with national, state and local

electric codes. The following table provides the correct voltage, amperage and frequency that must be supplied to the cooktop.

The supply must be from an individual grounded circuit that is protected by a circuit breaker and rated per the specifications for the various models as shown in the table above.

+ 11 hidden pages