FELIX STORCH, INC.
SUMMIT APPLIANCE DIVISION®
INSTRUCTION MANUAL FOR:
AL-650
ALB-651
AL-652B
ALB-653B
Thank you for purchasing this appliance and for putting your trust in our company. It’s designed to refrigerate and/or freeze your fresh foods, while adding elegance to your home or office.
REFRIGERATOR-FREEZER
Before Putting Into Use
These instructions are intended for the user. They describe the appliance and the correct and safe way to use it. The instruction manual was prepared for various types/models of refrigerators. Therefore you may find in it descriptions of some accessories and functions that your appliance may not have.
Before connecting the appliance to the power supply, leave it standing for about 2 hours, which will reduce a possibility of malfunctions in the cooling system due to transport handling.
Clean the appliance thoroughly; especially in the interior (See Cleaning the Appliance).
In case the interior accessories are not correctly placed, rearrange them as necessary.
Mounting Instructions
Integrated appliances are equipped with instructions for mounting the appliance into the kitchen unit.
The appliance should be mounted by qualified technicians and instructions are for their use only.
We Care for the Environment
Our appliances are distributed in packaging made of environmental friendly material which could safely be recycled, disposed of or destroyed without any effects on the environment whatsoever.
Our instruction manuals are printed either on recycled paper or chlorine free bleached paper.
Tips for Energy Savings
Try not to open the door too often, especially when the weather is hot and humid. Once you open the door try to close it as soon as possible.
Every now and then check if the appliance is sufficiently ventilated (adequate air circulation behind the appliance).
Set thermostat from higher to lower settings as soon as possible (depending on how loaded the appliance is, ambient temperature etc...). The coils on the rear of the refrigerator should be cleaned and free of dust or any impurities.
Ice and frost layer increase energy consumption, so do clean the appliance as soon as the layer is 1/8” thick.
Always consider instructions stated in sections Positioning and Energy Saving Tips, otherwise the energy consumption is substantially higher.
Instructions for Use
Important
If you bought this appliance to replace an old one equipped with a lock that cannot be opened from the inside (lock, bolt), make sure that the lock is broken. This will make it impossible for children to lock themselves inside the appliance and suffocate.
The appliance must be correctly connected to the power supply.
If the food has a strange smell or color throw it away because it is very likely that it is spoiled and therefore dangerous to eat.
Disconnect the appliance from the power supply before repairing it (only a qualified technician should repair it), cleaning it and before replacing the light bulb.
Use only enclosed tools or tools recommended by the manufacturer.
For the sake of environmental protection be careful not to damage the rear wall of the appliance (the condenser unit or the tubes when moving the refrigerator) or any part of the refrigerating system inside the appliance. Use only enclosed tools or tools recommended by the manufacturer.
The refrigerating system of the appliance is filled with refrigerant and oil, so when the appliance is damaged handle it with care and dispose of it in compliance with the environmental protection precautions
Before throwing away your old refrigerator or freezer please remove the doors and leave the shelves in place so that children may not easily climb inside.
. DANGER: Risk of child entrapment.
The rating plate is inside the appliance or outside on the rear wall.
Disposing of the Worn Out Appliance
When your appliance finally wears out, dispose of it. If the appliance has a lock, break it to prevent eventual accidents (danger of children getting locked inside the appliance).
The refrigerating system of the appliance is filled with refrigerant and insulating substances which should be separately treated and processed, you should call your nearest authorized service agent or specialized servicing center if they cannot be contacted call your local authorities or your distributor to remove the refrigerator. Be careful not to damage the tubes on the rear wall of the appliance (danger of pollution).
Instructions for Use
Placing and Installation
Choosing the Right Place
Place the appliance in a dry and regularly ventilated room. Allowed ambient temperature depends on the model (class) of the appliance and is stated on the rating plate of the appliance.
Class |
Ambient Temperature |
SN (sub-normal) |
from + 56°F to + 90°F |
N (normal) |
from + 62°F to + 90°F |
ST (sub-tropical) |
from + 64°F to +100°F |
T (tropical) |
from + 64°F to +120°F |
The appliance may be exposed to lower or higher temperatures but only for a shorter period of time and the temperature should never be lower than 41°F. Never place the appliance near heat emitting devices (e.g. cooker, radiator, water heater or similar devices) and do not expose it to direct sunlight.
Placing the Self-Standing Appliance
It is important to make sure the appliance is leveled evenly to prevent falling.
Two spacers attached to the appliance must be fitted onto the upper edge of the condenser, thus preventing the appliance from being installed too close to the wall. Spacers are manufactured for all-purpose functions depending on the distance of the condenser from the wall. Therefore turn spacers correspondingly and adjust them accordingly to the appliance.
Connection to Power Supply
Connect the appliance with the cable and plug to the power supply socket outlet with a ground terminal (safety socket).
“DO NOT USE AN EXTENSION CORD.”
Required nominal voltage and frequency are indicated on the rating plate.
The connection to the power supply and grounding has to be made according to current standards and regulations. The appliance resists temporary voltage tolerance up to -15 to 10%.
Loading...