Sub-Zero & Wolf 30 Drawer Microwave - Transitional Reference Guide

30" Drawer Microwave – Transitional

FEATURES

• Classic stainless steel designed to

match Wolf E series ovens.

• Can be installed in a standard or flush

inset (accessory required) application.

• 20% larger interior capacity accommo-

dates 9" x 13" pans and cups up to 7"
in height.

• 10 power levels and sensor cooking

make cooking easy.

• Keep warm setting allows food to be

kept warm for up to 99 minutes.

• Kitchen timer can be set for up to 99

minutes and 99 seconds.

• Control panel lock can be locked for

child safety or to prevent unwanted use.

wolfappliance.com

MODEL OPTIONS

DRAWER MICROWAVE

Transitional MD30TE/S

ACCESSORIES

• Flush inset vent.

Accessories avail able through an authorized
Wolf dealer. For local dealer information, visit
the find a showroom section of our website,
wolfappliance.com.

30" Drawer Microwave – Transitional

"

SIDE

SIDE

NOTE: All dr
Dashed line represents profile of unit

wolfappliance.com

SPECIFICATIONS

PRODUCT

Dimensions 297/8"W x 151/8"H x 217/8"D
Weight 96 lb

OVEN INTERIOR

Capacity 1.2 cu ft

5

Dimensions 17

/16"W x 71/8"H x 169/16"D

ELECTRICAL

Power 950 W
Supply 120 VAC, 60 Hz
Service 15 amp circuit
Power Cord 4 ft

Specifications are subject to change without
notice. Visit wolfappliance.com/specs for the
most up-to-date information.

Dimensions may vary ±

1

/8" (3). Dimensions in
parentheses are millimeters unless otherwise
specified.

STANDARD I

NSTALLATION

DIMENSIONS

297/8" (759)

151/8"

(384)

11/4"

(32)

217/8" (556)

BEHIND FRAME

13/4"

(45)

POWER CORD

FLUSH INSET INSTALLATION

CHANNEL

145/8"

(372)

215/8" (549)

45/8"

(118)

OPEN DRAWER

161/2

(419)

ANTI-TIP BLOCK

BASE SUPPORT

VIEW

awer microwave ovens require the same opening dimensions.

143/4" (375)

OPENING

HEIGHT

.

TOP VIEW

E

221/8" (562)

W

OPENING WIDTH

FRONT VIEW

(559)

22"

OPENING

DEPTH

ANTI-TIP BLOCK

1515/16" (405)

FLUSH INSET

HEIGHT

VIEW

*Will be visible and should be finished to match cabinetry.

NOTE: Dashed line represents profile of unit.

11/4" (32)

TOP VIEW

E

4" (102)

A

301/8" (765)

FLUSH INSET WIDTH

FRONT VIEW

7

/16"(11)

3

/4" (19)

W

231/4"

(591)

FLUSH INSET

DEPTH

FINISHED

CLEATS*

©Wolf Appliance, Inc. all rights reserved. 10/2013