Sub-Zero & Wolf 30 Downdrafts Reference Guide

30" Downdraft Ventilation

FEATURES

• Three-speed blower control with boost.

• Remote-mounted control module with

LED indicators.

• Delay-off feature to automatically turn

unit off.

• Stainless steel, mesh filters.

• Reversible motor box.

• Adjustable discharge.

wolfappliance.com

BLOWER OPTIONS*

MODEL DD30 CFM

Internal 600
In-line 600
Remote 600 or 1200

*Blowers sold separately.

IMPORTANT NOTE: Wolf downdrafts can
be used with all Wolf induction, electric and
gas cooktops, except unframed models.
Wolf downdrafts cannot be used with
the steamer or fryer module and are not
recommended for use with the electric grill
module.

ACCESSORIES

• Trim kit for SRT304.

• Make-up air damper.

• 8" Inline damper.

• 10" Inline damper.

Accessories avail able through an authorized
Wolf dealer. For local dealer information, visit
the find a showroom section of our website,
wolfappliance.com.

30" Downdraft Ventilation

W

W

wolfappliance.com

SPECIFICATIONS

PRODUCT

Dimensions 30"W x 14"H x 2"D
Weight 75 lb

DISCHARGE

Internal 6" Round
In-line or Remote 10" Round

ELECTRICAL

Supply 120 VAC, 60 Hz
Service 15 amp circuit
Power Cord 4 ft

Specifications are subject to change without
notice. Visit wolfappliance.com/specs for the
most up-to-date information.

Dimensions may vary ±

1

/8" (3). Dimensions in
parentheses are millimeters unless otherwise
specified.

INSTALLATION WITH COOKTOP

211/16" (68)

DIMENSIONS

30" (762)

W

DOWNDRAFT WIDTH

2"

(51)

63/4"

14"

(356)

(172)

23/8"

(60)

15"

13"

(330)

(381)

283/4"

(730)

10"

(254)

13"

(330)

261/2" (673)

A

CHIMNEY WIDTH

21/2"

(64)

NOTE: Shown with front mounted internal blower with 6" (152) round discharge,
dashed line represents rear mount.

INSTALLATION WITH SEALED BURNER RANGETOP

271/2" (699) 271/2" (699)

DOWNDRAFT

CUT-OUT WIDTH

E

81/4" (210)*

211/16" (68)

CUT-OUT WIDTH

E

DOWNDRAFT

81/4" (210)*

COOKTOP CUT-OUT

TOP VIEW

19" (483)

81/4"

(210)*

*6" (152) back from countertop cut-out when internal blower is rear mounted.

*6" (152) back from the countertop cutout when an internal blower is rear mounted. *6" (152) back from the countertop cutout when an internal blower is rear mounted.

NOTE: Internal blower 6"
Centerline indicates center of downdraft cut-out.

211/4"

(540)

(152) round, side, rear or bottom discharge. In-line and remote blower 10" (254) round, rear discharge.

211/4"

(540)

E

233/8"

(594)

FRONT VIEWSIDE VIEW

PLATFORM DEPTH

81/4"

(210)*

*6" (152) back from countertop cut-out when internal blower is rear mounted.

NOTE: Internal blower 6"
Centerline indicates center of downdraft cut-out.

211/4"

(540)

(152) round, side, rear or bottom discharge. In-line and remote blower 10" (254) round, rear discharge.

RANGETOP OPENING

TOP VIEW

211/4"

233/8"

(540)

(594)

E

FRONT VIEWSIDE VIEW

FRONT VIEWSIDE VIEW

©Wolf Appliance, Inc. all rights reserved. 11/2013