This appliance will be certified by Star-K
to meet strict religious regulations in
conjunction with specific instructions
found on www.star-k.org.
verlay or stainless
O
steel application
Two-litre bottle
oor storage
d
bottom shelf)
(
Easy-access
nic controls
electro
The Sub-Zero Undercounter all refrigerator Model UC-24R can accommodate
an overlay or stainless steel door front
panel. A classic stainless steel door panel
and tubular handle is available as a sales
accessory.
Dimensions in parentheses are in
millimeters unless otherwise specified.
2/07
counter units simplify life at home by
Sub-Zero
Under
bringing refrigeration anywhere it's needed. Fresh
greens in the kitchen island. Soda and snacks in the
media room. Chilled mineral water in the master suite.
Imagine how this innovative built-in unit can serve you.
The all refrigerator Model UC-24R can be fitted with a
custom overlay or stainless steel door front panel. A
classic stainless steel door panel with tubular handle is
ble as a sales accessory.
aila
av
The Model UC-24R offers more features than ever with
easy-access electronic controls, LCD display, spill-proof
cantilever glass shelves, utility bin for stor
age of
smaller items and two-litre bottle storage in the bottom
door shelf.
1
Planning Information
90˚
253/8"
(645)
TOP VIEW
FRONT VIEWSIDE VIEW
(CABINET DIMENSION)
4
(102)
DOOR FRAME
(597)
1
2
23
30
(767)
DOOR
FRAME
*34
(864)
(587)
1
8
23
3
16
23
7
8
(606)
*
1
/2" (13)
+
_
ADJUSTMENT IN LEVELING LEGS
Undercounter Model UC-24R
FEATURES
All refrigerator
E
nergy Star qualified
Can be fitted with a custom overlay or stainless steel door front panel
Classic stainless steel door panel with
tubular handle available as a sales accessory
Easy-access electronic controls with LCD
display
Adjustable spill-proof cantilever glass
shelves and spill-proof glass floor
Clear utility bin for storage of smaller items
T
wo-litre bottle storage in the bottom door
shelf
Optional lock available as a sales accessory
UL approved for US and Canada
Two, five and twelve year residential
warranty—exclusions apply, see warranty at
the end of this guide
OVERALL DIMENSIONS
Dimensions may vary by ±1/8" (3).
Dimensions in parentheses are in
millimeters unless otherwise specified.
2
Planning Information
Undercounter Model UC-24R
SPECIFICATIONS
M
odel UC-24RUndercounter All Refrigerator
Overall Width237/8" (606)
Overall Height34" (864)
MODEL
A
ll RefrigeratorUC-24R
Classic stainless steel door front panel is
available as a sales accessory and
includes a tubular handle.
ACCESSORIES
Classic stainless steel door front
panel with tubular handle
Classic stainless steel tubular
handle for overlay application
Polished chr
ome handle for
overlay application
UL approved door lock kit
Accessories are available through your
Sub-Zero dealer. To obtain local dealer
information, visit the Locator section of
our website, subzero.com.
Overall Depth24" (610)
Refrigerator Capacity5.7 cu ft (161 L)
D
oor Swing Clearance25
3
/8"
(645)
Electrical Requirements115 V AC, 60 Hz
15 amp dedicated circuit
Annual Energy Usage339 kWh / $ 31
(based on 9.06 cents per kilowatt hour)
Energy Star Qualified
Shipping Weight130 lbs (59 kg)
Specifications are subject to change without notice.
Dimensions in parentheses are in
millimeters unless otherwise specified.
3
Planning Information
341/2"
(876)
ROUGH
OPENING
HEIGHT
341/4"
(870)
MINIMUM
HEIGHT
REQUIRED
24" (610)
ROUGH OPENING
W
IDTH
151/2"
(394)
2
LOCATE ELECTRICAL
WITHIN SHADED AREA
3"
(
76
)
2" (51)
FRONT VIEW
A
NTI-TIP BRACKET
24"
(
610)
R
OUGH
O
PENING
D
EPTH
TOP VIEW
Undercounter Model UC-24R
INSTALLATION SPECIFICATIONS
DIMENSIONS
Finished Rough Opening Width24" (610)
Finished Rough Opening Height341/2" (876)
inished Rough Opening Depth24" (610)
F
Location of ElectricalWithin shaded area
See Installation Instructions shipped with unit for detailed specifications.
Dimensions in parentheses are in
millimeters unless otherwise specified.
4
Planning Information
Undercounter Model UC-24R
INSTALLATION NOTES
R
efer to the illustrations and specifications
for overall dimensions, finished rough opening
dimensions and installation specifics.
T
he Undercounter unit must be installed to
open a minimum of 90˚ or you will have
problems pulling the utility bin out.
For corner installations, you need allow for a
minimum 3" (76) filler so the door can open to
90˚. If you are using some larger handle
hardware, you will also need to take that into
account.
The anti-tip bracket must be installed to
prevent the unit from tipping forward.
When planning to install the Undercounter
unit next to adjoining cabinetry, you must make
provisions to allow the door to open to a
maximum of 145˚ and not interfere with the
door panel. Refer to the full-scale illustration on
page 8 for cabinetry dimensions.
For the overlay application, y
provide a decorative door panel. Refer to the
overlay door panel information on page 6. You
must also supply your own handle hardware.
ou will need to
F
or the overlay application, the weight limit
for the decorative door panel is 20 lbs (9 kg).
5
The panel must be a minimum of
A
115 V AC, 60 Hz, 15 amp fused electrical
/8" (16) thick.
supply is required. It is recommended that a
separate circuit, serving only this appliance, be
provided.
The Model UC-24R is equipped with a power
supply cord with a 3-prong grounding plug
which must be plugged into a mating 3-prong
grounding type wall receptacle. The electrical
outlet must be placed so the grounding prong
is to the right of the thinner blades. The
outlet must be flush with the back wall. Locate
electrical within the shaded area shown in the
installation illustration on page 4.
You must follow all National Electrical Code
regulations. In addition, be aware of local codes
and ordinances when installing your service.
Refer to the Undercounter Installation
Instructions packed with the appliance, which
provides step-by-step procedures for making
sure the unit is installed properly.
Dimensions in parentheses are in
millimeters unless otherwise specified.
5
Planning Information
W
H
Undercounter Model UC-24R
Overlay Door Panel
OVERLAY DOOR PANEL
Undercounter models come ready to accept a custom
overlay panel. The overlay door panel design allows for a
decorative panel to cover the door trim for a seamless
appearance that will compliment surrounding cabinetry.
You may also choose to match the handle hardware of
surrounding cabinetry or use a Sub-Zero accessory handle
available through your Sub-Zero dealer. To obtain local
dealer information, visit the Locator section of our
website, subzero.com. Handles are mounted directly to the
overlay panel. Panels are mounted on the door using the
Integrated technique of mounting brackets.
IMPORTANT NOTE: The weight of the door panel cannot
exceed 20 lbs (9 kg).
When planning to install an Undercounter model next to
adjoining cabinetry, you must make provisions to allow the
door to open to a maximum of 145˚ and not hit the door
panel. Refer to the full-scale illustration on page 8.
Refer to the following chart and the Overlay Door Panel
illustration for panel specifications for Model UC-24R.
O VERLAY P ANEL DIMENSIONS
Door Panel Width233/4" (603)
Door Panel Height301/16" (764)
Door Panel Weight20 lbs (9 kg) max
Panel Thic
kness
5
/8" (16) min
Dimensions in parentheses are in
millimeters unless otherwise specified.
6
Planning Information
Undercounter Model UC-24R
HARDWARE CONSIDERATIONS
When using an Undercounter model in an overlay application, you must provide your own handle hardware. It is
recommended you use our optional handles, available as
sales accessories. We recommend using a pull handle and
not a pull knob. The handle must be fastened directly to
the overlay panel, regardless of the type of handle used.
Optional stainless steel handles are available in a variety of
diameters and lengths in the classic stainless steel finish
and polished chrome. Contact your Sub-Zero dealer for
specifics. To obtain local dealer information, visit the
Locator section of our website, subzero.com.
Dimensions in parentheses are in
millimeters unless otherwise specified.
7
Undercounter Model UC-24R
DOOR PANEL
SUB-ZERO DOOR
145˚*
1
2
(13)
1
4
(6)
*
1
8
(3)
3
4
(19)
23 (587)
TO BACK OF
APPLIANCE
1
8
*
UNDERCOUNTER
UNIT MUST EXTEND
A MINIMUM 1/4"
(6)
BEYOND THE FRONT
SURFACE OF
ADJOINING
CABINETRY TO
ALLOW THE MAXIMUM
DOOR SWING
SUB-ZERO
DOOR
DOOR
PANEL
24 (610)
CABINETRY
OPENING
23 (600)
DOOR PANEL
WIDTH
3
4
DOOR CLOSED AND 145˚ MAX OPENING
Planning Information
Dimensions in parentheses are in
millimeters unless otherwise specified.
8
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.