INSTALLATION GUIDE
Undercounter Refrigeration
Contents
Important Note
Undercounter Refrigeration . . . . . . . . . . . . . . . . . . . . . 3
Undercounter Specifications . . . . . . . . . . . . . . . . . . . . 4
ite Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
S
Undercounter Installation . . . . . . . . . . . . . . . . . . . . . . 7
Service Information . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Features and specifications are subject to change at any time
without notice. Visit subzero.com/specs for the most up-todate information.
IMPORTANT NOTE: Throughout this guide, dimensions in
parentheses are millimeters unless otherwise specified.
o ensure the safe and efficient installation of Sub-Zero
T
equipment, please take note of the following types of
highlighted information throughout this guide:
IMPORTANT NOTE highlights information that is especially
relevant to a problem-free installation.
CAUTION signals a situation where minor injury or product
damage may occur if instructions are not followed.
WARNING states a hazard that may cause serious injury or
death if precautions are not followed.
Undercounter Refrigeration 3
subzero.com/specs
Sub-Zero Undercounter Refrigeration
IMPORTANT NOTE: T
he importance of the installation of
the Sub-Zero undercounter unit cannot be overemphasized. Installation should be done by a qualified installer.
Before you begin the installation process, it is recommended that you read this entire installation guide. There
are key details that you should take special care to
observe during the installation. By reading these instructions carefully, you will make the installation process
easier, problem-free and, most importantly, safe.
Any questions or problems regarding the installation
should be directed to your authorized Sub-Zero dealer or
Sub-Zero customer care at 800-222-7820. You may also
check the contact & support sectionofour website,
subzero.com.
Important product information, including the model and
serial number of your unit are listed on the product rating
plate, located inside the cabinet, in the upper left area of
the unit. Refer to the illustration.
ATING PLATE
R
Location of rating plate.
Undercounter Specifications 4
24" (610)
O
PENING
D
EPTH
24" (610)
OPENING WIDTH
24" (610)
OPENING DEPTH
341/2" (876)
OPENING
HEIGHT
TOP VIEW
FRONT VIEWSIDE VIEW
237/8" (606) 24" (610)
34"
(864)
4" (102)
253/8"
(645)
13/4" (44)
Undercounter Models
OVERALL DIMENSIONS
OPENING DIMENSIONS
SPECIFICATIONS
Shipping Weight lbs (kg)
All Models 130 (59)
Site Preparation 5
subzero.com/specs
Before You Start
ake sure the opening dimensions, door clearance,
M
electrical service and plumbing are correct for the model
you are about to install. Refer to specifications on the
following pages.
IMPORTANT NOTE: To operate properly, the door must
open a minimum of 90°. Use a minimum 3"
(76) filler in
corner installations to assure a 90° door opening. Allow
enough clearance in front of the unit for full door swing.
TOOLS AND MATERIALS REQUIRED
• Appliance dolly able to support 130 lbs (59 kg)
• Level — 2' (.6 m) and 4' (1.2 m) recommended
• Phillips and slotted screwdriver sets
• Wrench set and allen wrench set
• Crescent wrenches
• Various sized pliers
5
•
/16" hex bolt nut driver
• Drill and assorted drill bits
• Model UC-24CI—4'
(1.2 m) of
1
/4" copper, braided
stainless steel or PEX tubing and saddle valve for
water line (do not use self-piercing valves).
• Model UC-24CI—Tubing cutter.
• Masonite, plywood,
1
/8" pressed fiberboard, cardboard
or other suitable material to protect finished flooring