Integrated Refrigeration Design Guide
Contents
3 Integrated Refrigeration
4 Specications
8 Custom Panels
11 Full-Scale Template
Models IC-18F and IC-30R.
Features and specications are subject to change at any
time without notice. Visit subzero.com/specs for the most
up-to-date information.
IMPORTANT NOTE: Throughout this guide, dimensions may
1
vary by ±
/8" (3). Dimensions in parentheses are millimeters
unless otherwise specied.
INTEGRATED REFRIGERATION
Integrated Refrigeration
With custom front panels and hardware, Sub-Zero invented
integrated columns, tall and drawer models that disappear
into the decor. Integrated units t ush with other cabinets,
making integrated refrigeration as practical and beautiful in
the master suite, bar or theatre room as in the kitchen.
INTEGRATED MODELS
KEY FEATURES
• Custom front panels and hardware allow for innite
design options.
• Point-of-use refrigeration that can be placed anywhere in
the home.
• Dual refrigeration; two compressors preserve food’s
goodness in self-contained compartments.
®
• Energy efcient; many models are ENERGY STAR
qualied.
• Star-K certied.
IC-18FI
ID-24R,
ID-24F(I)
IC-24R,
IC-24FI
ID-27R
IC-30R(ID),
IC-30FI
ID-30F(I), ID-30C(I)
ID-30R(P),
IC-36R(ID)
ID-36R(P),
ID-36C(I)
IT-30R(ID),
IT-30FI, IT-30CI(ID)
subzero.com/specs | 3
IT-36R(ID),
IT-36CI(ID)
INTEGRATED REFRIGERATION
691/2"
(1765)
W 24" (610)
84"*
(2134)
41/2" (114)
35/8" (92)
*831/2" (2121) MIN TO 841/2" (2146) MAX
A
B
13/4" (45)
Specications
INTERIOR CAPACITY
COLUMN R CU FT (L) F CU FT (L)
IC-18FI 8.4 (238)
IC-24R 12.9 (365)
IC-24FI 12.3 (348)
IC-30R(ID) 17.3 (490)
IC-30FI 15.3 (433)
IC-36R(ID) 21.4 (606)
TALL R CU FT
IT-30R(ID) 16.5 (467)
IT-30FI 15.1 (428)
IT-30CI(ID) 10.6 (300) 5.0 (142)
IT-36R(ID) 20.5 (580)
IT-36CI(ID) 13.3 (377) 6.4 (181)
DRAWER R CU FT
ID-24R 4.0 (113)
ID-24F(I) 3.8 (108)
ID-27R 4.6 (130)
ID-30R(P) 5.2 (147)
ID-30F(I) 4.9 (139)
ID-30C(I) 3.0 (85) 2.0 (57)
ID-36R(P) 6.6 (187)
ID-36C(I) 3.4 (96) 2.5 (71)
(L) F CU FT (L)
(L) F CU FT (L)
Overall Dimensions
COLUMN
SHIPPING WEIGHT
COLUMN LB (KG)
IC-18FI 260 (118)
IC-24R, IC-24FI 340 (154)
IC-30R(ID), IC-30FI 400 (181)
IC-36R(ID) 440 (200)
TALL LB
IT-30R(ID), IT-30FI, IT-30CI(ID) 400 (181)
IT-36R(ID), IT-36CI(ID) 460 (209)
DRAWER LB
ID-24R, ID-24F(I) 170 (77)
ID-27R 190 (86)
ID-30R(P), ID-30F(I), ID-30C(I) 210 (95)
ID-36R(P), ID-36C(I) 250 (113)
IMPORTANT NOTE: Overall dimensions do not include
panels or handles. Dimensions will vary with panel
thickness.
(KG)
(KG)
COLUMN
MODEL W A B
IC-18FI 18" (457) 21/2" (64) 161/2" (419)
IC-24R, IC-24FI 24" (610) 4" (102) 221/2" (572)
IC-30R(ID), IC-30FI 30" (762) 55/8" (143) 281/2" (724)
IC-36R(ID) 36" (914) 71/4" (184) 341/2" (876)
4 | Sub-Zero Customer Care 800.222.7820
INTEGRATED REFRIGERATION
173/4"
(451)
W 24" (610)
84"*
(2134)
109/16"
(268)
447/8"
(1140)
135/16"
(338)
3
/8" (10)
41/2"
(114)
35/8"
(92)
*831/2" (2121) MIN TO 841/2" (2146) MAX
3
/8" (10)
A
B
13/4" (45)
34
Overall Dimensions
TALL DRAWER
W
1
/2"*
(876)
*34" (864) MIN TO 35" (889) MAX
173/4"
(451)
135/16"
(338)
109/16"
(268)
24" (610)
1
(6)
/4"
3
(10)
/8"
35/8" (92)
TALL
MODEL W A B
IT-30R(ID), IT-30FI 30" (762) 55/8" (143) 281/2" (724)
IT-30CI(ID) 30" (762) 55/8" (143) 281/2" (724)
IT-36R(ID), IT-36CI(ID) 36" (914) 71/4" (184) 341/2" (876)
DRAWER
MODEL W
ID-24R, ID-24F(I) 24" (610)
ID-27R 27" (686)
ID-30R(P), ID-30F(I), ID-30C(I) 30" (762)
ID-36R(P), ID-36C(I) 36" (914)
subzero.com/specs | 5
INTEGRATED REFRIGERATION
NOTE: Shaded areas will be visib
SIDE
3
/4" (19)
TYPICAL
31/2"
(89)
TYPICAL
Opening Dimensions
INTEGRATED MODELS
TOP VIEW
25" (635)
OPENING
DEPTH
OPENING DIMENSIONS
COLUMN W H
IC-18FI 18" (457) 84" (2134)
IC-24R, IC-24FI 24" (610) 84" (2134)
IC-30R(ID), IC-30FI 30" (762) 84" (2134)
IC-36R(ID) 36" (914) 84" (2134)
TALL W H
IT-30R(ID), IT-30FI, IT-30CI(ID) 30" (762) 84" (2134)
IT-36R(ID), IT-36CI(ID) 36" (914) 84" (2134)
DRAWER W H
ID-24R, ID-24F(I) 24" (610) 341/2" (876)
ID-27R 27" (686) 341/2" (876)
ID-30R(P), ID-30F(I), ID-30C(I) 30" (762) 341/2" (876)
ID-36R(P), ID-36C(I) 36" (914) 341/2" (876)
VIEW
H
OPENING
HEIGHT
le and should be finished to match cabinetry.
TYPICAL
W
OPENING WIDTH
FRONT VIEW
31/2"
(89)
The depth of each integrated model is 24" (610). Allow for
panel thickness when planning the nished opening depth.
1
Approximately 3
/2" (89) of the opening depth may be visible
when the door/drawers are open and should be nished to
match cabinetry. Refer to the illustration below.
DUAL INSTALLATION
When installing two units side by side in a dual installation, the opening width is the width of the two units added
together. A dual installation kit will be required for this installation. If a dual installation kit is not specied, a minimum
(51) ller strip is required between units.
2"
Dual installation kits are available through an authorized
Sub-Zero dealer. For local dealer information, visit the nd a
showroom section of our website, subzero.com. For questions regarding the installation, call Sub-Zero customer care
at 800-222-7820.
6 | Sub-Zero Customer Care 800.222.7820
3
/4" (19)
TYPICAL
INTEGRATED REFRIGERATION
Electrical
The electrical supply must be located within the shaded
area shown in the illustration and chart below. A separate
circuit, servicing only this appliance is required. A ground
fault circuit interrupter (GFCI) is not recommended and may
cause interruption of operation.
The electrical outlet must be positioned with the grounding
prong to the right of the thinner blades.
Installation must comply with all applicable electrical codes.
ELECTRICAL REQUIREMENTS
Electrical Supply 115 VAC, 60 Hz
Service 15 amp
Receptacle 3-prong grounding-type
ELECTRICAL SUPPLY LOCATION
MODEL A
18" Model 6" (152)
24" Model 91/2" (241)
27" Model 11" (279)
30" Model 121/2" (318)
36" Model 151/2" (394)
Plumbing
The water supply line should be located within the shaded
area shown in the illustration below. The water supply line
should be connected to the house supply with an easily
accessible shut-off valve. Do not use self-piercing valves.
The water supply line must not interfere with installation of
the anti-tip bracket.
A reverse osmosis system can be used provided there is
constant water pressure of 35–120 psi
to the unit at all times. A copper line is not recommended
for this application.
Installation must comply with all applicable plumbing codes.
PLUMBING REQUIREMENTS
Water Supply
Pressure 35–120 psi
Excess Line for Connection 36" (914)
WATER SUPPLY LOCATION
MODEL A
18" Model 3" (76)
24" Model 51/2" (140)
30" Model 6" (152)
36" Model 9" (229)
(2.4–8.3 bar) supplied
1
/4" OD copper, braided
stainless steel or PEX tubing
(2.4–8.3 bar)
LEFT SIDE
OF OPENING
41/2"
(114)
1
/4" (6)1/4" (6)
A
FLOOR
Electrical supply location.
41/4"
(108)
RIGHT SIDE
OF OPENING
6" (152)
A
3" (76)
1
AREA EXTENDS
FORWARD ON FLOOR
/2" (13)
Water supply location.
subzero.com/specs | 7
INTEGRATED REFRIGERATION
Custom Panels
For integrated models, custom door panels and handle
hardware must be provided. Refer to the panel requirements
chart and typical panel dimensions.
The thickness of the custom panel can vary. A minimum
5
/8" (16) thick panel is required, but the thickness can be
increased provided it does not exceed the weight limit. The
depth of each integrated model is 24"
(610). Allow for panel
thickness when planning the nished opening depth. Refer
to the full-scale template on page 11.
CAUTION
As reveals between cabinetry and the unit decrease,
severe nger pinching can occur while door is closing.
Finish all sides of custom panels. They will be visible when
the door/drawer is open.
D-style handles are recommended. Door handles must be
located near the edge of the panel opposite the hinge and
should be centered top to bottom. Drawer handles must
be located near the top edge of each panel. Stainless steel
tubular and pro handles are avail able through an authorized
Sub-Zero dealer. For local dealer information, visit the nd a
showroom section of our website, subzero.com.
PANEL REQUIREMENTS
PANEL WEIGHT MAX
18" Column 45 lb (20 kg)
24" Column 60 lb (27 kg)
30" Column 75 lb (34 kg)
36" Column 75 lb (34 kg)
PANEL WEIGHT MAX
30" Tall (door) 50 lb (22 kg)
36" Tall (door) 60 lb (27 kg)
Drawer 15 lb (7 kg)
PANEL THICKNESS MIN
All Panels
5
/8" (16)
TYPICAL PANEL DIMENSIONS
Column
79
(2029)
7
/8"
W
Tall
493/8"
(1254)
139/16"
(345)
1611/16"
(424)
WW
Drawer
Typical panel dimensions are based on an 84" (2134) nished
1
height for column and tall models and 34
models, with a 4"
(102) toe kick and
/2" (876) for drawer
1
/8" (3) reveals. Panel
dimensions must be adjusted accordingly for all other installations. Refer to the illustration for panel heights and the
chart below for panel widths.
PANEL WIDTH
MODEL W
18" Model 173/4" (451)
24" Model 233/4" (603)
27" Model 263/4" (679)
30" Model 293/4" (756)
36" Model 353/4" (908)
DUAL INSTALLATION
For dual installations, refer to the illustration for panel
heights and the chart below for panel widths.
8 | Sub-Zero Customer Care 800.222.7820
PANEL WIDTH
MODEL W
18" Model 1713/16" (452)
24" Model 2313/16" (605)
27" Model 2613/16" (681)
30" Model 2913/16" (757)
36" Model 3513/16" (910)
INTEGRATED REFRIGERATION
Custom Panels
DOOR PANEL HEIGHT
The height of the custom door panel can extend beyond the
typical panel height, provided it does not exceed the weight
limit. Refer to the illustration below.
13/4"
(45)
A DECORATIVE VALANCE
CANNOT EXTEND
BEYOND THIS PLANE
24" (610)
TO BACK OF UNIT
84"
(2134)
1
/8" (3)
DOOR
PANEL
HINGE
TOE KICK CLEARANCE
The height of the toe kick area can extend beyond the
typical toe kick height, provided it does not exceed the
dimensions in the illustration below.
VENTED
LOUVERS
24" (610)
TO BACK OF UNIT
11/8" (29)
MAX
TOE KICK
ADJUSTMENT
A DECORATIVE TOE KICK
CANNOT EXTEND
BEYOND THIS PLANE
4" (102)
TO
6" (152)
FROM FLOOR
HINGE
DOOR
PANEL
Upper valance (column and tall)—side view.
Toe kick—side view.
subzero.com/specs | 9
INTEGRATED REFRIGERATION
Handle Hardware
Optional stainless steel tubular and pro handles are available through an authorized Sub-Zero dealer. For local dealer
information, visit the nd a showroom section of our
website, subzero.com.
Refer to the chart below for the length and stud spacing of
standard handles for integrated models.
STANDARD HANDLES
COLUMN LENGTH STUD SPACING
Tubular 501/8" (1273) 471/8" (1197)
Pro 483/8" (1229) 471/8" (1197)
TALL (DOOR) / 36" DRAWER LENGTH STUD SPACING
Tubular 331/4" (845) 301/4" (768)
Pro 311/2" (851) 301/4" (768)
30" DRAWER LENGTH STUD SPACING
Tubular 271/4" (692) 241/4" (616)
Pro 251/2" (648) 241/4" (616)
27" DRAWER LENGTH STUD SPACING
Tubular 241/4" (616) 211/4" (540)
Pro 221/2" (572) 211/4" (540)
24" DRAWER LENGTH STUD SPACING
Tubular 211/4" (540) 181/4" (464)
Pro 191/2" (495) 181/4" (464)
10 | Sub-Zero Customer Care 800.222.7820
INTEGRATED REFRIGERATION
Maximum Door Opening
FULL-SCALE TEMPLATE
As the panel width and/or depth increases, so does the
potential for panel interference. Interference may be
minimized by utilizing the 90° door stop.
1
/8" (3) REVEAL
POTENTIAL
INTERFERENCE
ADJACENT
CABINETRY
3
/4" (19) PANEL
DOOR OPEN
MAXIMUM 105°
DOOR CLOSED
3
/4" (19) PANEL
1" (25)0"
SCALE
Maximum door opening (top view).
POTENTIAL INTERFERENCE
subzero.com/specs | 11
Sub-Zero Residential Limited Warranty
FOR RESIDENTIAL USE
FULL TWO YEAR WARRANTY*
For two years from the date of original installation, this Sub-Zero product warranty covers all parts and
labor to repair or replace, under normal residential use, any part of the product that proves to be defective in materials or workmanship. All service provided by Sub-Zero under the above warranty must be
performed by Sub-Zero factory certied service, unless otherwise specied by Sub-Zero, Inc. Service will
be provided during normal business hours.
FULL FIVE YEAR SEALED SYSTEM WARRANTY
For ve years from the date of original installation, this Sub-Zero product warranty covers all parts and
labor to repair or replace, under normal residential use, these parts that prove to be defective in materials
or workmanship: compressor, condenser, evaporator, drier and all connecting tubing. All service provided
by Sub-Zero under the above warranty must be performed by Sub-Zero factory certied service, unless
otherwise specied by Sub-Zero, Inc. Service will be provided during normal business hours.
LIMITED TWELVE YEAR SEALED SYSTEM WARRANTY
For twelve years from the date of original installation, Sub-Zero will repair or replace the following parts
that prove to be defective in materials or workmanship: compressor, condenser, evaporator, drier and all
connecting tubing. If the owner uses Sub-Zero factory certied service, the service provider will repair or
replace these parts with the owner paying for all other costs, including labor. If the owner uses non-certied service, the owner must contact Sub-Zero, Inc. (using the information below) to receive repaired or
replacement parts. Sub-Zero will not reimburse the owner for parts purchased from non-certied service
or other sources.
TERMS APPLICABLE TO EACH WARRANTY
The warranty applies only to products installed for normal residential use. The warranty applies only to
products installed in any one of the fty states of the United States, the District of Columbia or the ten
provinces of Canada. This warranty does not cover any parts or labor to correct any defect caused by
negligence, accident or improper use, maintenance, installation, service or repair.
THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES THAT SUB-ZERO, INC.
WILL PROVIDE, EITHER UNDER THIS WARRANTY OR UNDER ANY WARRANTY ARISING BY OPERATION OF
LAW. SUB-ZERO, INC. WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES
ARISING FROM THE BREACH OF THIS WARRANTY OR ANY OTHER WARRANTY, WHETHER EXPRESS,
IMPLIED OR STATUTORY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you. This warranty gives you specic legal rights and you may also
have other legal rights that vary from state to state.
To receive parts and/or service and the name of Sub-Zero factory certied service nearest you, contact
Sub-Zero, Inc., P.O. Box 44848, Madison, WI 53744; check the contact & support section of our website,
subzero.com, email us at customerservice@subzero.com or call 800-222-7820.
*Stainless steel (doors, panels, handles, product frames and interior surfaces) are covered by a limited
60-day parts and labor warranty for cosmetic defects.
*Replacement water lters and air purication cartridges are not covered by the product warranty.
Sub-Zero, Sub-Zero & Design, Dual Refrigeration, Constant Care, The Living Kitchen, Great American Kitchens The Fine Art of Kitchen Design, and Ingredients are registered trademarks and service marks of Sub-Zero, Inc. Wolf, Wolf & Design, Wolf Gourmet, W & Design and the color red as applied to knobs are registered trademarks and service marks of Wolf
Appliance, Inc. (collectively, the “Company Marks.”) All other trademarks or registered trademarks are property of their respective owners in the United States and other countries.
SUB-ZERO, INC. P.O. BOX 44848 MADISON, WI 53744 SUBZERO.COM 800.222.7820
SZINIP2DG 9/2013
Loading...