Sub-zero DESIGN BROCHURE

SUB-ZERO DESIGN GUIDE

Contents

Built-In Refrigeration . . . . . . . . . . . . . . . . . . . . . . . . . . 3

PRO 48 Refrigeration . . . . . . . . . . . . . . . . . . . . . . . . . 44

Integrated Refrigeration . . . . . . . . . . . . . . . . . . . . . . 50

Wine Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Undercounter Refrigeration . . . . . . . . . . . . . . . . . . . . 84

Sub-Zero Warranties . . . . . . . . . . . . . . . . . . . . . . . . . 92

MODELS BI-36RG AND BI-36F

Features and specifications are subject to change at any time without notice. Visit subzero.com/specs for the most up-to-date information.

IMPORTANT NOTE: Throughout this guide, dimensions in parentheses are millimeters unless otherwise specified.

Built-In Refrigeration 3

36"

(914)

36"

(914)

36"

(914)

84"

(2134)

36"

(914)

36"

(914)

84"

(2134)

30"

(762)

30"

(762)

48"

(1219)

48"

(1219)

42"

(1067)

42"

(1067)

84"

(2134)

36"

(914)

subzero.com/specs

Built-In Refrigeration. For the built-in line, Sub-Zero designers and engineers took a fresh look at everything, inside

and out. Exterior refinements include redesigned grilles and lower-profile hinges. Inside, new technology in food preservation makes the built-in line nothing short of revolutionary.

BUILT-IN MODELS

BI-36R

BI-36RG BI-36F BI-30UGBI-30U BI-36U BI-36UG

BI-36S BI-42S BI-42SD BI-48S BI-48SD

KEY FEATURES

• Four distinct design approaches: framed, overlay,

flush inset and stainless steel.

• Handle options coordinate with handles of Wolf

cooking products.

• Dual refrigeration; two compressors preserve food’s

goodness in two sealed compartments.

• Energy efficient; many models are

ENERGY STAR

qualified.

• Advanced water filtration and air purification systems.

• Crisper and deli drawers form a lower-temperature

zone for produce and meats.

• Flip-up grille provides easy access for quick routine

maintenance.

• All models are Star-K certified.

®

Built-In Refrigeration 4

Built-In Design Options. A design classic is now even better. Four distinct design approaches provide limitless

flexibility for creating a beautiful kitchen. Lower-profile hinges enable the built-in units to blend more seamlessly with surrounding cabinetry.

Framed. Custom cabinetry

panels slide into the door to blend into the kitchen design. Shown with full-length handle and louvered grille option for the traditional Sub-Zero look.

Overlay. Custom cabinet

overlay panels can be combined with unique hardware for design flexibility. Shown with pro handle option to complement Wolf ranges.

Built-In Refrigeration 5

subzero.com/specs

Flush Inset. This design

option allows for a flush door and grille. Stainless steel panels are available as sales accessories. Shown with tubular handle option to mirror Wolf built-in ovens.

Stainless Steel. For a

professional look, this design requires no customization. To complement the look of Wolf ranges, choose the pro handle option shown here.

Built-In Refrigeration 6

3

6"

(914)

84"

(2134)

2

4"

(610)

4" (1 02)

733/4"

(1873)

237/8"

(606)

371/4"

(946)

17"

(432)

237/8" (606)

23/8" (60)

HEIGHT DIMENSIONS ±

1

/2" (13)

Built-In Models

SPECIFICATIONS

663)

657)

368)

459)

L)

F cu ft (

4.1 (

5.3 (

Interior Capacity R cu ft (

ALL REFRIGERATOR / ALL FREEZER MODE LS

BI-36R 23.4 ( BI-36RG 23.2 ( BI-36F 22.8 (

OVER -AND-UNDER MODE LS

BI-30U 13.0 ( BI-30UG 13.0 ( BI-36U 16.2 ( BI-36UG 16.1 (456) 5.3 ( 150)

SIDE -BY-SIDE M ODELS

BI-36S 12.2 (346) 8.0 (227) BI-42S 16.1 (456) 8.0 (227) BI-42SD 16.0 (453) 8.1 (230) BI-48S 18.8 (532) 9.5 (269) BI-48SD 18.7 (530) 9.7 (265)

Shipping Weight lbs (kg)

ALL REFRIGERATOR / ALL FREEZER MODE LS

BI-36R 420 (191) BI-36RG 430 (195) BI-36F 406 (184)

OVER -AND-UNDER MODE LS

BI-30U 462 (210) BI-30UG 476 (216) BI-36U 515 (234) BI-36UG 529 (240)

SIDE -BY-SIDE M ODELS

BI-36S 538 (244) BI-42S 582 (264) BI-42SD 608 (276) BI-48S 630 (286) BI-48SD 656 (298)

All Refrigerator / All Freezer Models

OVERALL DIMENSIONS

L)

646)

116)

150)

MODELS BI-36R, BI-36RG AND BI-36F

Shipping weights and overall dimensions are based on stainless steel models. For flush inset applications, add

1

/2" (13) to door clearance dimensions.

Built-In Refrigeration 7

30" (762)

8

4"

(2134)

24" (610)

4" (1 02)

503/4"

(1289)

23"

(584)

237/8"

(606)

235/8"

(600)

311/4"

(796)

141/2"

(368)

237/8" (606)

23/8" (60)

HEIGHT DIMENSIONS ±

1

/2" (13)

36" (914)

84"

(2134)

24" (610)

4" (1 02)

503/4"

(1289)

23"

(584)

237/8"

(606)

235/8"

(600)

371/4"

(946)

17"

(432)

237/8" (606)

23/8" (60)

HEIGHT DIMENSIONS ±

1

/2" (13)

subzero.com/specs

Over-and-Under Models

OVERALL DIMENSIONS

MODELS BI-30U AND BI-30UG

MODELS BI-36U AND BI-36UG

Built-In Refrigeration 8

42" (1067)

84"

(2134)

24" (610)

4" (1 02)

733/4"

(1873)

237/8" (606)

237/8"

(606)

261/4"

(668)

121/2"

(318)

83/4"

(222)

23/8" (60)

HEIGHT DIMENSIONS ±

1

/2" (13)

36" (914)

8

4"

(2134)

24" (610)

4" (1 02)

733/4"

(1873)

237/8"

(606)

221/4"

(565)

81/2"

(216)

101/4"

(260)

237/8" (606)

23/8" (60)

HEIGHT DIMENSIONS ±

1

/2" (13)

Side-by-Side Models

OVERALL DIMENSIONS

MODEL BI-36S

Overall dimensions are based on stainless steel models.

1

For flush inset applications, add dimensions.

/2" (13) to door clearance

MODELS BI-42S AND BI-42SD

Built-In Refrigeration 9

48" (1219)

84"

(2134)

24" (610)

4" (1 02)

733/4"

(1873)

237/8" (606)

237/8"

(606)

30"

(762)

14"

(356)

93/4"

(248)

23/8" (60)

HEIGHT DIMENSIONS ±

1

/2" (13)

subzero.com/specs

Side-by-Side Models

OVERALL DIMENSIONS

MODELS BI-48S AND BI-48SD

Built-In Refrigeration 10

24" (610)

OPENING

DEPTH

FRONT VIEWSIDE VIEW

T

OP VIEW

A

OPENING WIDTH

24" (

610)

OPENING DEPTH

833/4"

(2127)

OPENING

HEIGHT

Built-In Models

STANDARD INSTALLATION

Opening Width A

BI-36R, BI-36RG and BI-36F 351/2" (902)

BI-30U and BI-30UG 291/2" (746)

BI-36U and BI-36UG 351/2" (902)

BI-36S 351/2" (902)

BI-42S and BI-42SD 411/2" (1054)

BI-48S and BI-48SD 471/2" (1206)

IMPORTANT NOTE: If two units are installed side by side, refer to pages 30–31 for dual standard installations.

Stainless steel models are ready to install out of the box.

Built-In Refrigeration 11

3" (76)

18" (457)

FRONT VIEW

FLOOR

6"

(152)

TOP VIEW

BACK WALL

1

/2"

(13)

18" (457)

6"

(152)

FRONT VIEW

751/2"

(1918) FROM

FLOOR

7"

(178)

E

6"

(152)

subzero.com/specs

Planning Information

ELECTRICAL REQUIREMENTS

For all built-in models, the electrical supply should be located within the shaded area shown in the illustration. Follow the National Electrical Code and local codes and ordinances when installing the receptacle. A separate circuit servicing only this appliance is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation.

Electrical Requirements

Power Supply 115 V AC, 60 Hz

Circuit Breaker 15 amp

Receptacle 3-prong grounding-type

PLUMBING REQUIREMENTS

All built-in models with an automatic ice maker come with a microbiological water filtration system. The water supply line should be located within the shaded area shown in the illustrations. The water supply line should be connected to the house supply with an easily accessible shut-off valve between the supply and the unit. Do not use self-piercing valves. A saddle valve kit (4200880) is available through your authorized Sub-Zero dealer. The water line must not interfere with installation of the anti-tip brackets.

IMPORTANT NOTE: A reverse osmosis system can be

used provided there is constant water pressure of 30 psi (2.1 bar) to 100 psi (6.9 bar) supplied to the unit at all times. In this application, the microbiological water filtration system should be set to bypass mode by removing the water filter cartridge and inserting the bypass plug (7005018) available through your authorized Sub-Zero dealer. Installation instructions packed with the unit will outline this procedure.

Plumbing Requirements

Water Supply Line

1

/4" OD copper line

Water Pressure 30–100 psi (2.1– 6.9 bar)

Excess Water Line for Connection 36" (914)

Location of electrical supply.

Location of water supply— rear.

Location of water supply— bottom.

Built-In Refrigeration 12

Framed Application

IMPORTANT NOTE: T

he framed application is not a separate model. This is an overlay unit in a framed application.

The framed panel design option is available for all built-in overlay models. You must specify panels, full-length handles and a framed grille insert to achieve the traditional framed look. For exact door panel dimensions refer to framed panel specifications on the following pages. Also refer to the full-scale templates at the end of this section for additional panel and handle considerations.

Optional extended full-length handles that provide additional finger clearance for raised panels are available through your authorized Sub-Zero dealer.

Custom cabinetry panels slide into the door to blend into the kitchen design. Shown with full-length handle and louvered grille option for the traditional Sub-Zero look.

Framed Panel Requirements

MAX WEIGHT PER PANEL

BI-36R, BI-36RG and BI-36F 75 lbs (34 kg) All Other Framed Panels 50 lbs (23 kg)

MIN PANEL THICK NESS

All Framed Panels

1

/4" (6)

Built-In Refrigeration 13

1

/4" (6)

PANEL

T

RIM

R

EVEAL

1

/4" (6) min

DOOR

M

AIN FRAME

T

RIM

R

EVEAL

1

/4" (6) min

ROUT TO

1

/4" (6)

DOOR

M

AIN FRAME

subzero.com/specs

Framed Panels

f the thickness of the custom panels is less than

I they must be backed up with a sheet of shim material to build the total thickness to

1

than

/4" (6), a routed edge must be provided around the

1

/4" (6). If the panel is thicker

panel to ensure a proper fit. Refer to the illustrations.

IMPORTANT NOTE: For framed design applications,

routing, recessing or optional extended handles may be required on raised panels for finger clearance under the handle. Refer to the full-scale templates at the end of this section.

1

(6),

/4"

IMPORTANT NOTE: Do not cover a glass door with a solid

panel. Also, the edges of the window cut-out will need to be finished, as they will be exposed.

IMPORTANT NOTE: When installing two units in a side-by-

side application, refer to pages 30–31 for dual standard installations. Be aware that rough opening dimensions are different for this application.

Panels1/4" (6) thick or less. Panels thicker than1/4" (6).

Built-In Refrigeration 14

H

W

H

W

AA

A

B

H

W

AA

A

H

W

Framed Panels

BI-36R / BI-36F BI-36RG BI-30U / BI-36U BI-30UG / BI-36UG

Models BI-36R, BI-36RG and BI-36F

REFR IGERATOR/ FREEZER WH

Door Panel 353/4" (908) 699/16" (1767)

BI-3 6RG WH

Window Cut-Out 251/2" (648) 541/16" (1373)

AB

Cut-Out Location 53/16" (132) 105/16" (262)

Models BI-30U and BI-30UG

REFR IGERATOR WH

Door Panel 293/4" (756) 4915/16" (1268)

FREE ZER WH

Drawer Panel 293/4" (756) 1811/16" (475)

BI-3 0UG WH

Window Cut-Out 191/2" (495) 3911/16" (1008)

Cut-Out Location 53/16" (132)

Models BI-36U and BI-36UG

REFR IGERATOR WH

Door Panel 353/4" (908) 4915/16" (1268)

FREE ZER WH

Drawer Panel 353/4" (908) 1811/16" (475)

BI-3 6UG WH

Window Cut-Out 251/2" (648) 3911/16" (1008)

Cut-Out Location 53/16" (132)

A

Built-In Refrigeration 15

H

WW

H

WW

B

A

subzero.com/specs

Framed Panels

BI-36S / BI-42S / BI-48S BI-42SD / BI-48SD

Model BI-36S

REFR IGERATOR WH

Door Panel 1913/16" (503) 699/16" (1767)

FREE ZER WH

Door Panel 157/16" (392) 699/16" (1767)

Models BI-48S and BI-48SD

REFR IGERATOR WH

Door Panel 281/2" (724) 699/16" (1767)

FREE ZER WH

Door Panel 183/4" (476) 699/16" (1767)

BI-4 8SD WH

Dispenser Cut-Out 57/8" (149) 127/16" (316)

Models BI-42S and BI-42SD

REFR IGERATOR WH

Cut-Out Location 17/8" (48) 283/4" (730)

Door Panel 2413/16" (630) 699/16" (1767)

FREE ZER WH

Door Panel 167/16" (418) 699/16" (1767)

BI-4 2SD WH

Dispenser Cut-Out 57/8" (149) 127/16" (316)

AB

For models BI-42SD and BI-48SD, panel thickness in the dispenser area can range from

1

/8" (29). If the panel is thicker, you must rout out a minimum

1

/4" (6) flat landing area to accommodate the glasswell bezel.

Cut-Out Location 17/8" (48) 283/4" (730)

AB

1

/4" (6) to a maximum of

Built-In Refrigeration 16

Framed Application

OPTIONAL GRILLE PANEL

A panel grille, providing an 84" (2134) finished height, is standard on overlay models. Optional panel grilles are available for 83" (2108) and 88" (2235) finished heights.

Grille panel dimensions listed are for a standard 84" (2134) finished height. For an 83" (2108) finished height, subtract 1" (25) from grille panel height dimensions. For an 88" (2235) finished height, add 4" (102) to height dimensions.

Optional Grille Panel WH

762)

30" (

36" (914) Models 353/4" (908) 8

42" (1067) Models 413/4" (1060) 815/16" (227)

48" (1219) Models 473/4" (1213) 815/16" (227)

Models 293/4" (

756)

815/16" (

5

1

/16" (227)

227)

Optional grille panel.

Grille Panel Requirements

MAX WEIGHT

Grille Panel 13 lbs (6 kg)

MIN PANEL THICK NESS

Grille Panel

1

/4" (6)

Built-In Refrigeration 17

WW

H

subzero.com/specs

Framed Application

PARTIAL FRAMED OPTION

If you choose not to use custom panels above and below the glasswell for dispenser model BI-42SD or BI-48SD, a stainless steel insert panel is available as a sales accessory. This accessory kit includes partial framed molding and stainless steel panel to provide a spill-resistant finish above and below the glasswell on the refrigerator door only. The partial framed accessory kit (7004855) is available through your authorized Sub-Zero dealer. Refer to panel dimensions for the partial framed option below.

IMPORTANT NOTE: When using raised panels with the

partial framed kit, a

1

/2" (13) trim reveal down to1/4" (6)

Partial framed kit.

thickness is necessary at the bezel for the panels to fit properly.

Optional Partial Framed Panels

BI-4 2SD WH

Refrigerator Panel 151/16" (383) 699/16" (1767) Freezer Panel 167/16" (418) 699/16" (1767)

BI-4 8SD WH

Refrigerator Panel 163/4" (425) 699/16" (1767) Freezer Panel 183/4" (476) 699/16" (1767)

BI-42SD / BI-48SD Partial framed option.

Built-In Refrigeration 18

Overlay Panels

f you and your client have ordered an overlay model, you

I will be adding panels and handles to give the unit a more custom look. The overlay panel design option is available for all built-in overlay models. For exact door panel dimensions, refer to overlay panel specifications on the following pages.

IMPORTANT NOTE: Overlay models can be used in an

overlay or a flush inset application. Be aware that the application specified will affect panel sizes, rough opening dimensions and installation.

The overlay design allows decorative panels to cover the door trim for a more seamless appearance that blends with the design of the room. The most common way to achieve this look is to work with three panels—the decorative overlay panel, which is typically spacer panel and a

1

/4" (6) backer panel. Depending on your cabinet manufacturer, this could also be one panel routed for different dimensions.

3

/4" (19), a .10" (3)

Custom cabinet overlay panels can be combined with unique hardware for design flexibility. Shown with pro handle option to complement Wolf ranges and rangetops.

Overlay Panel Requirements

MAX WEIGHT PER PANEL

BI-36R, BI-36RG and BI-36F 75 lbs (34 kg) All Other Overlay Models 50 lbs (23 kg) Grille Panel 13 lbs (6 kg)

MIN PANEL THICK NESS

All Overlay Panels

5

/8" (16)

Regardless of the physical construction of the panels (three-panel assembly or routed panel), you will need to follow the overlay panel specifications on the following pages for exact sizing and panel placement to ensure a proper fit.

Built-In Refrigeration 19

1

/8"

(3)

OVERLAY PANEL

SPACER PANEL

BACKER PANEL

TRIM

5

/16" (8) min

1

/4" (6)

.10" (3)

OVERLAY

PANEL

SPACER

PANEL

BACKER

PANEL

3

/4"

(19)

typical

subzero.com/specs

Overlay Panels

he illustrations provide a cross section view of the three-

T panel assembly, showing placement of the trim and a rear view of the three-panel assembly with critical dimensions, standard for all built-in models.

Overlay grille panels for the panel grille match the design of the overlay door panels. Dimensions for the grille panel are listed in the overlay panel specifications on the following pages.

IMPORTANT NOTE: On glass door models, the edges of

the overlay, spacer and backer panels of the window cut-out will need to be finished, as they will be exposed.

IMPORTANT NOTE: When installing two units in a side-by-

side application, refer to pages 30–31 for dual standard installations. Be aware that rough opening dimensions are different for this application.

Panel assembly cross section. Panel assembly rear view.

Do not exceed overlay panel dimensions, as this could cause damage to panels and the Sub-Zero unit.

Built-In Refrigeration 20

H

W

H

W

AA

A

B

H

W

AA

A

H

W

Overlay Panels

BI-36R / BI-36F BI-36RG

Models BI-36R, BI-36RG and BI-36F

REFR IGERATOR / FREEZ ER WH

Overlay Panel 36" (914) 693/4" (1772) Spacer Panel 351/8" (892) 6815/16" (1751) Backer Panel 353/4" (908) 699/16" (1767)

GRIL LE WH

Overlay Panel 36" (914) 91/4" (235)* Spacer Panel 351/8" (892) 85/16" (211) Backer Panel 353/4" (908) 815/16" (227)

BI-3 6RG WH

Window Cut-Out 251/2" (648) 541/8" (1375)

AB

Cut-Out Location 51/4" (133) 103/8" (264)

Models BI-30U and BI-30UG

REFR IGERATOR WH

BI-30U / BI-36U BI-30UG / BI-36UG

Models BI-36U and BI-36UG

REFR IGERATOR WH

Overlay Panel 36" (914) 501/8" (1273) Spacer Panel 351/8" (892) 495/16" (1253) Backer Panel 353/4" (908) 4915/16" (1268)

FREE ZER WH

Overlay Panel 36" (914) 19" (483) Spacer Panel 351/8" (892) 181/16" (459) Backer Panel 353/4" (908) 1811/16" (475)

GRIL LE WH

Overlay Panel 36" (914) 91/4" (235)* Spacer Panel 351/8" (892) 85/16" (211) Backer Panel 353/4" (908) 815/16" (227)

BI-3 6UG WH

Window Cut-Out 251/2" (648) 395/8" (1006)

Cut-Out Location 51/4" (133) Overlay Panel 30" (762) 501/8" (1273) Spacer Panel 291/8" (740) 495/16" (1253) Backer Panel 293/4" (756) 4915/16" (1268)

FREE ZER WH

Overlay Panel 30" (762) 19" (483) Spacer Panel 291/8" (740) 181/16" (459) Backer Panel 293/4" (756) 1811/16" (475)

GRIL LE WH

Overlay Panel 30" (762) 91/4" (235)* Spacer Panel 291/8" (740) 85/16" (211) Backer Panel 293/4" (756) 815/16" (227)

BI-3 0UG WH

Window Cut-Out 191/2" (495) 395/8" (1006)

A

*Panel height may be increased by1/2" (13) to hide upper main frame. For more information, refer to the built-in panel configurator at subzero.com/trade/panels.

Grille panel dimensions listed are for a standard 84" (2134) finished height. For an 83" (2108) finished height, subtract 1" (25) from grille panel height dimensions. For an 88" (2235) finished height, add 4" (102) to height dimensions. An 83" (2108) or 88" (2235) panel grille must be ordered to accept an 83" (2108) or 88" (2235) custom panel. Width dimensions do not vary.

Cut-Out Location 51/4" (133)

A

Built-In Refrigeration 21

H

WW

H

WW

B

A

subzero.com/specs

Overlay Panels

BI-36S / BI-42S / BI-48S BI-42SD / BI-48SD

Model BI-36S

REFR IGERATOR WH

Overlay Panel 201/16" (510) 693/4" (1772) Spacer Panel 193/16" (487) 6815/16" (1751) Backer Panel 1913/16" (503) 699/16" (1767)

FREE ZER WH

Overlay Panel 1511/16" (398) 693/4" (1772) Spacer Panel 1413/16" (376) 6815/16" (1751) Backer Panel 157/16" (392) 699/16" (1767)

GRIL LE WH

Overlay Panel 36" (914) 91/4" (235)* Spacer Panel 351/8" (892) 85/16" (211) Backer Panel 353/4" (908) 815/16" (227)

Models BI-42S and BI-42SD

REFR IGERATOR WH

Models BI-48S and BI-48SD

REFR IGERATOR WH

Overlay Panel 283/4" (730) 693/4" (1772)

Spacer Panel 277/8" (708) 6815/16" (1751)

Backer Panel 281/2" (724) 699/16" (1767)

FREE ZER WH

Overlay Panel 19" (483) 693/4" (1772)

Spacer Panel 181/8" (460) 6815/16" (1751)

Backer Panel 183/4" (476) 699/16" (1767)

GRIL LE WH

Overlay Panel 48" (1219) 91/4" (235)*

Spacer Panel 471/8" (1197) 85/16" (211)

Backer Panel 473/4" (1213) 815/16" (227)

BI-4 8SD WH

Dispenser Cut-Out 57/8" (149) 127/16" (316)

Cut-Out Location 2" (51) 2813/16" (732) Overlay Panel 251/16" (637) 693/4" (1772) Spacer Panel 243/16" (614) 6815/16" (1751) Backer Panel 2413/16" (630) 699/16" (1767)

FREE ZER WH

Overlay Panel 1611/16" (424) 693/4" (1772) Spacer Panel 1513/16" (402) 6815/16" (1751) Backer Panel 167/16" (418) 699/16" (1767)

GRIL LE WH

Overlay Panel 42" (1067) 91/4" (235)* Spacer Panel 411/8" (1045) 85/16" (211) Backer Panel 413/4" (1060) 815/16" (227)

BI-4 2SD WH

Dispenser Cut-Out 57/8" (149) 127/16" (316)

AB

*Panel height may be increased by1/2" (13) to hide upper main frame. For more information, refer to the built-in panel configurator at subzero.com/trade/panels.

Grille panel dimensions listed are for a standard 84" (2134) finished height. For an 83" (2108) finished height, subtract 1" (25) from grille panel height dimensions. For an 88" (2235) finished height, add 4" (102) to height dimensions. An 83" (2108) or 88" (2235) panel grille must be ordered to accept an 83" (2108) or 88" (2235) custom panel. Width dimensions do not vary.

Cut-Out Location 2" (51) 2813/16" (732)

AB

Built-In Refrigeration 22

STANDARD INSTALLATION

24" (610)

OPENING

DEPTH

TOP VIEW

263/16"

(665)

FLUSH

INSET

DEPTH

23/16"

(56)

11/4"

(32)

TOP VIEWT

FLUSH INSET INSTALLATION

WITH

3

/4" (19) PANEL

24" (610)

OPENING

DEPTH

Flush Inset Application

t is necessary to consider the following points when

I planning for a flush inset application:

• The flush inset depth is 2

standard opening.

• The flush inset width is 2

standard opening.

• The flush inset height is

standard opening.

• Panel widths increase to achieve the flush inset look.

• You must allow a

1

of the unit and grille to allow for proper door swing and airflow.

IMPORTANT NOTE: The flush inset application is not a

separate model. This is an overlay unit in a flush installation. The same model is used in an overlay or flush inset application.

3

/16" (56) deeper than the

1

/2" (64) wider than the

1

/4" (6) higher than the

/2" (13) reveal around the perimeter

This design option allows for a flush door and grille. Stainless steel panels are available as sales accessories. Shown with tubular handle option to mirror Wolf built-in ovens.

Rough opening dimensions for the flush inset application assume the use of a

3

/4" (19) decorative panel. The illustrations below show the difference between standard and flush inset installations.

Standard installation. Flush inset installation.

Built-In Refrigeration 23

UNIT WITH

3

/4" (

19)

PANEL

DETAIL A

DETAIL B

FRONT VIEW

A

WIDTH TO CLEAT

B

FLUSH INSET WIDTH

11/4"

(32)

11/4"

(32)

SIDE VIEW

84"

(2134)

FLUSH

INSET

HEIGHT

1

/4"

(6)

24" (610)

DEPTH TO CLEAT

263/16" (665)

FLUSH INSET DEPTH

23/16"

(56)

833/4"

(2127)

HEIGHT

TO CLEAT

24" (610)

DEPTH

TO CLEAT

263/16"

(665)

FLUSH

INSET

DEPTH

TOP VIEW

23/16"

(56)

11/4"

(32)

CLEAT

11/4"

(

32)

24" (

610)

OPENING

D

EPTH

TO CLEAT

CLEAT

T

OP VIEW

263/16"

(665)

F

LUSH

INSET

DEPTH

23/16"(56)

3" (

76)

typical

24" (610)

OPENING

DEPTH TO

CLEAT

11/4"

(32)

23/16"(56)

CLEAT

SHADED

A

REA

MUST BE

FINISHED

3" typical

(76)

4" (102)

3

subzero.com/specs

Built-In Models

FLUSH INSET INSTALLATION

Detail A

Flush Inset Opening Widths AB

BI-36R, BI-36RG and BI-36F 351/2" (902) 38" (965)

BI-30U and BI-30UG 291/2" (746) 32" (813)

BI-36U and BI-36UG 351/2" (902) 38" (965)

BI-36S 351/2" (902) 38" (965)

BI-42S and BI-42SD 411/2" (1054) 44" (1118)

BI-48S and BI-48SD 471/2" (1206) 50" (1270)

Detail B

IMPORTANT NOTE: Dimensions assume a3/4" (19) panel

thickness.

IMPORTANT NOTE: If two units are installed side by side, refer to pages 32–36 for dual flush inset installations.

Built-In Refrigeration 24

1

/4" (6)

.10" (3)

FLUSH INSET

PANEL

SPACER

PANEL

BACKER

PANEL

3

/4"

(19)

typical

Flush Inset Panels

he flush inset application allows decorative panels on the

T front of the unit to be flush with surrounding cabinetry and is available for all built-in overlay models. For exact panel dimensions, refer to flush inset panel specifications on the following pages.

The flush inset design allows decorative panels to cover the door trim for a seamless appearance that blends with the design of the room. The most common way to achieve this look is to work with three panels—the decorative flush inset panel, which is typically panel and a

1

/4" (6) backer panel. Depending on your

3

/4" (19), a .10" (3) spacer

cabinet manufacturer, this could also be one panel routed for different dimensions.

Regardless of the physical construction of the panels (three-panel assembly or routed panel), you will need to follow the flush inset panel specifications on the following pages for exact sizing and panel placement to ensure a proper fit.

Do not exceed flush inset panel dimensions, as this could cause damage to panels and the Sub-Zero unit.

he illustration below provides a rear view of the three-

T panel assembly with critical dimensions, standard for all built-in models.

IMPORTANT NOTE: The inside edges of the rough opening

as well as the sides and a portion of the back side of the decorative panels will need to be finished, as they will be exposed when the doors are open.

IMPORTANT NOTE: On glass door models, the edges of

the overlay, spacer and backer panels of the window cut-out will need to be finished, as they will be exposed.

IMPORTANT NOTE: For flush inset panels thicker than

3

/4" (19), a 90° door stop may be required to prevent interference with adjacent cabinets. Refer to the full-scale templates at the end of this section.

IMPORTANT NOTE: When installing two units side by side

in a flush inset application, refer to pages 32–36 for dual flush inset installations. Be aware that rough opening dimensions, panel sizes and offsets are different for this application.

Flush Inset Panel Requirements

MAX WEIGHT PER PANEL

BI-36R, BI-36RG and BI-36F 75 lbs (34 kg) All Other Flush Inset Models 50 lbs (23 kg) Grille Panel 13 lbs (6 kg)

MIN PANEL THICK NESS

All Flush Inset Panels

5

/8" (16)

Three-panel assembly.

Built-In Refrigeration 25

5

/8"

(16)

5

/16" (

8) 1

/2"

(13)

FLUSH INSET PANEL

SPACER

BACKER

DOOR / DRAWER / GRILLE

TOP VIEW

CABINETRY

1

/4" (6)

REVEAL

5

/16" (8)

1

/8" (

3)

DOOR DOOR

TOP VIEWT

1

/2"(13)

5

/16"

(

8)

1

/8"

(3)

CABINETRY

GRILLE

SIDE VIEW S

1

/2"(13)

3

/32"

(2)

5

/16"

(8)

5

/16"

(8)

5

/32"

(4)

GRILLE

DOOR

SIDE VIEW

5

/8"(16)

5

/32"

(4)

5

/16"

(8)

5

/16"

(8)

3

/32"

(2)

DOOR

DRAWER

SIDE VIEW SIDE VIEW

C

5

/16"

(8)

3

/32"

(2)

DOOR /

DRAWER

SIDE VIEW

subzero.com/specs

Flush Inset Panels

PANEL OFFSETS

Illustrations A–F provide panel offsets and reveals for all built-in models in a flush inset application. Refer to the chart below for reference to the illustrations relating to your specific model.

For additional information on model-specific panel reveals, visit the specification library section of our website, subzerotrade.com.

Panel Offsets Illus.

ALL REFRIGERATOR / ALL FREEZER

Door / Grille Sides A Grille Top C Grille Bottom / Door Top D Door Bottom F

OVER -AND-UNDER

Door / Drawer / Grille Sides A Grille Top C Grille Bottom / Door Top D Door Bottom / Drawer Top E Drawer Bottom F

SIDE -BY-SIDE

Doors (hinge) / Grille Sides A Doors (handle) Sides B Grille Top C Grille Bottom / Door Top D Door Bottom F

Illus. A Illus. B

Illus. C Illus. D

Illus. E Illus. F

Built-In Refrigeration 26

H

W

H

W

AA

A

B

H

W

AA

A

H

W

Flush Inset Panels

BI-36R / BI-36F BI-36RG

Models BI-36R, BI-36RG and BI-36F

REFR IGERATOR / FREEZ ER WH

Flush Inset Panel 37" (940) 693/4" (1772) Spacer Panel 351/8" (892) 6815/16" (1751) Backer Panel 353/4" (908) 699/16" (1767)

GRIL LE WH

Flush Inset Panel 37" (940) 91/4" (235) Spacer Panel 351/8" (892) 85/16" (211) Backer Panel 353/4" (908) 815/16" (227)

BI-3 6RG WH

Window Cut-Out 251/2" (648) 541/8" (1375)

AB

Cut-Out Location 53/4" (146) 103/8" (264)

BI-30U / BI-36U BI-30UG / BI-36UG

Models BI-36U and BI-36UG

REFR IGERATOR WH

Flush Inset Panel 37" (940) 501/8" (1273) Spacer Panel 351/8" (892) 495/16" (1253) Backer Panel 353/4" (908) 4915/16" (1268)

FREE ZER WH

Flush Inset Panel 37" (940) 19" (483) Spacer Panel 351/8" (892) 181/16" (459) Backer Panel 353/4" (908) 1811/16" (475)

GRIL LE WH

Flush Inset Panel 37" (940) 91/4" (235) Spacer Panel 351/8" (892) 85/16" (211) Backer Panel 353/4" (908) 815/16" (227)

BI-3 6UG WH

Window Cut-Out 251/2" (648) 395/8" (1006)

Models BI-30U and BI-30UG

REFR IGERATOR WH

Cut-Out Location 53/4" (146) 51/4" (133)

Flush Inset Panel 31" (787) 501/8" (1273) Spacer Panel 291/8" (740) 495/16" (1253) Backer Panel 293/4" (756) 4915/16" (1268)

FREE ZER WH

Flush Inset Panel 31" (787) 19" (483) Spacer Panel 291/8" (740) 181/16" (459) Backer Panel 293/4" (756) 1811/16" (475)

GRIL LE WH

Flush Inset Panel 31" (787) 91/4" (235) Spacer Panel 291/8" (740) 85/16" (211)

Grille panel dimensions listed are for a standard 84" (2134) finished height. For an 83" (2108) finished height, subtract 1" (25) from grille panel height dimensions. For an 88" (2235) finished height, add 4" (102) to height dimensions. An 83" (2108) or 88" (2235) panel grille must be ordered to accept an 83" (2108) or 88" (2235) custom panel. Width dimensions do not vary.

Backer Panel 293/4" (756) 815/16" (227)

BI-3 0UG WH

Window Cut-Out 191/2" (495) 395/8" (1006)

AB

Cut-Out Location 53/4" (146) 51/4" (133)

AB

Built-In Refrigeration 27

H

WW

H

WW

B

A

subzero.com/specs

Flush Inset Panels

BI-36S / BI-42S / BI-48S BI-42SD / BI-48SD

Model BI-36S

REFR IGERATOR WH

Flush Inset Panel 209/16" (522) 693/4" (1772) Spacer Panel 193/16" (487) 6815/16" (1751) Backer Panel 1913/16" (503) 699/16" (1767)

FREE ZER WH

Flush Inset Panel 163/16" (411) 693/4" (1772) Spacer Panel 1413/16" (376) 6815/16" (1751) Backer Panel 157/16" (392) 699/16" (1767)

GRIL LE WH

Flush Inset Panel 37" (940) 91/4" (235) Spacer Panel 351/8" (892) 85/16" (211) Backer Panel 353/4" (908) 815/16" (227)

Models BI-48S and BI-48SD

REFR IGERATOR WH

Flush Inset Panel 291/4" (743) 693/4" (1772) Spacer Panel 277/8" (708) 6815/16" (1751) Backer Panel 281/2" (724) 699/16" (1767)

FREE ZER WH

Flush Inset Panel 191/2" (495) 693/4" (1772) Spacer Panel 181/8" (460) 6815/16" (1751) Backer Panel 183/4" (476) 699/16" (1767)

GRIL LE WH

Flush Inset Panel 49" (1245) 91/4" (235) Spacer Panel 471/8" (1197) 85/16" (211) Backer Panel 473/4" (1213) 815/16" (227)

DISP ENSER (BI-48SD) WH

Cut-Out 57/8" (149) 127/16" (316)

Models BI-42S and BI-42SD

REFR IGERATOR WH

Cut-Out Location 2" (51) 2813/16" (732)

Flush Inset Panel 259/16" (649) 693/4" (1772) Spacer Panel 243/16" (614) 6815/16" (1751) Backer Panel 2413/16" (630) 699/16" (1767)

FREE ZER WH

Flush Inset Panel 173/16" (437) 693/4" (1772) Spacer Panel 1513/16" (402) 6815/16" (1751) Backer Panel 167/16" (418) 699/16" (1767)

GRIL LE WH

Flush Inset Panel 43" (1092) 91/4" (235)

Grille panel dimensions listed are for a standard 84" (2134) finished height. For an 83" (2108) finished height, subtract 1" (25) from grille panel height dimensions. For an 88" (2235) finished height, add 4" (102) to height dimensions. An 83" (2108) or 88" (2235) panel grille must be ordered to accept an 83" (2108) or 88" (2235) custom panel. Width dimensions do not vary.

Spacer Panel 411/8" (1045) 85/16" (211) Backer Panel 413/4" (1060) 815/16" (227)

DISP ENSER (BI-42SD) WH

Dispenser Cut-Out 57/8" (149) 127/16" (316)

AB

Cut-Out Location 2" (51) 2813/16" (732)

AB

Built-In Refrigeration 28

2"

(51)

1"

(25)

GLASSWELL

HANDLE

65/16" (160)

3

/32"

(2)

1

/8" (3)

R

ADIUS

5

/8"

(

16)

127/8"

(327)

Dispenser

MODELS BI-42SD AND BI-48SD

The refrigerator door panel must include a cut-out to accommodate the dispenser glasswell and bezel. The thickness of the panel in this area can range from to a maximum of 1

1

/8" (29).

1

/4" (6)

IMPORTANT NOTE: Regardless of the thickness of the

panel for model BI-42SD or BI-48SD, you must plan for a flat landing area for the decorative bezel surrounding the glasswell area. The illustration to the right provides exact bezel dimensions. Refer to the appropriate panel specifications page for exact cut-out location. This landing area can be accomplished in a number of different ways. These photos show two options.

One option (flush) is to rout the panel so the bezel will be flush with rails and stiles. You must rout a space to accommodate the height and width of the bezel. The width of the stile immediately to the left of the bezel must

3

be 1

/4" (44). Do not cut the entire stile to this dimension.

The other option (proud) shows a boxed out landing area for the bezel using stiles and rails to create this space. In this application, the bezel will sit proud of the stiles and rails. The total thickness of the panels at this level must not exceed 1

1

/8" (29).

or overlay and flush inset models, mounting placement of

F the refrigerator door handle must assure proper access to the glasswell and adequate clearance under the handle. The handle placement illustration shows the relation of the refrigerator door handle to the glasswell bezel on stainless steel models.

Handle placement.

Flush option.

Dispenser dimensions.

Proud option.

Built-In Refrigeration 29

MAIN

FRAME

SIDE PANEL

ROUTING

1" (25)

17/8" (48)

1

/8" (3)

1

/2" (13)

84"

(2134)

24" (610)

ROUT TO

3

/16" (5)

(OVER-AND-UNDER

MODELS)

OPTIONAL

TOE KICK CUT-OUT

4" (102)

201/2"

(521)

53/4"

(146)

17/8"(48)

1" (25)

41/4" (108)

ROUT TO

1

/8" (3)

FRONT

OF SIDE

PANEL

25/8"

(67)

subzero.com/specs

Side Panels

ide panels can be used with every design application.

S When planning for side panels with the installation of a built-in model, you need to be aware of the space configuration to achieve a pleasing fit. Depending on the exact panel you are using with your unit, the height of the panel may vary.

IMPORTANT NOTE: The use of side panels may change

the width of your rough opening.

The side panel will need to be a minimum of 24" (610) deep and

1

/2" (13) thick. Refer to the illustrations below for side panel dimensions. Routing will be necessary so that the side panel fits flush against the side of the unit.

IMPORTANT NOTE: I

f you have a model BI-30U, BI-30UG, BI-36U or BI-36UG, extra routing will be necessary to prevent the panel from hitting the refrigerator lower hinge plate.

When installing a built-in unit with a custom side panel, an accessory kit (7003407) is required. Stainless steel and white enamel side panels are also available through your authorized Sub-Zero dealer.

Side panel dimensions.

Routing detail.

Built-In Refrigeration 30

WITHOUT FILLER STRIP

FILLER STRIP REQUIRED

Dual Installation

STANDARD APPLICATION

Two overlay or stainless steel units may be placed side by side in a dual installation. Some standard applications will require a dual installation kit, available through your authorized Sub-Zero dealer. If you are installing two units side by side in a flush inset application, refer to page 32.

A custom filler strip can be used between two units in a framed, overlay or stainless steel design application. It is recommended that the filler strip be at least 2" (51) wide to prevent condensation between the units. Be sure to add the filler strip width to your rough opening width. Refer to the full-scale template on page 42.

Dual installations without a filler strip can only be accomplished using two units with opposite hinges as shown in illustration A below. The dual installations shown in illustrations B and C require a filler strip.

Dual installation—standard application.

Dual Installation Panel Requirements

MAX WEIGHT PER PANEL

BI-36R, BI-36RG and BI-36F 75 lbs (34 kg) All Other Models 50 lbs (23 kg) Dual Wide Grille Panel 26 lbs (12 kg)

MIN PANEL THICK NESS

Framed Panels Overlay and Flush Inset Panels

1

/4" (6)

5

/8" (16)

IMPORTANT NOTE: For the application shown in illustra-

tion A, a dual installation accessory kit is required. Refer to page 36 for information on dual installation kits.

Illus. A

Illus. B Illus. C

Built-In Refrigeration 31

FRONT VIEWSIDE VIEW

T

OP VIEW

833/4"

(2127)

OPENING

HEIGHT

A

OPENING WIDTH

24" (610)

OPENING DEPTH

24" (610)

OPENING

DEPTH

subzero.com/specs

Dual Installation

STANDARD INSTALLATION

Opening Widths A

Two 30" (762) Models 593/4" (1518)

30" (762) and 36" (914) Models 653/4" (1670)

Two 36" (914) Models 713/4" (1822)

IMPORTANT NOTE: A dual installation kit will be required for this installation.

Stainless steel models are ready to install out of the box.

Built-In Refrigeration 32

WITHOUT FILLER STRIP

F

FILLER STRIP REQUIRED FILLER STRIP REQ

FILLER STRIP REQUIRED

Dual Installation

FLUSH INSET APPLICATION

Installing two built-in models side by side in a flush inset application will require adjustments to the dimensions of your finished rough opening, panel sizes and panel offsets. It will also require a dual installation kit, available through your authorized Sub-Zero dealer.

Dual installations without a filler strip can only be accomplished using two units with opposite hinges as shown in illustration A below. The dual installations shown in illustrations B and C require a filler strip. Refer to the full-scale template on page 43. Illustration A is the only application that will accommodate the dual wide grille.

IMPORTANT NOTE: The application shown in illustration A

can only be achieved by installing dual flush inset panels. Failure to install dual flush inset panels will cause the handle side of the panels to collide when closing. In this

Dual installation—flush inset application.

application a dual installation accessory kit is also required.

Dual Installation Panel Requirements

MAX WEIGHT PER PANEL

BI-36R, BI-36RG and BI-36F 75 lbs (34 kg) All Other Models 50 lbs (23 kg) Dual Wide Grille Panel 26 lbs (12 kg)

MIN PANEL THICK NESS

Flush Inset Panels

5

/8" (16)

Dual flush inset panels and dual installation kits are available through your authorized Sub-Zero dealer. Refer to pages 34–35 for dual flush inset panel specifications and page 36 for information on dual installation kits.

Illus. A

Illus. B Illus. C

Built-In Refrigeration 33

24" (610)

D

EPTH

TO CLEAT

263/16"

(

665)

F

LUSH INSET DEPTH

FRONT VIEW

TOP VIEW

23/16"

(56)

A

WIDTH TO CLEAT

B

FLUSH INSET WIDTH

11/4"

(32)

11/4"

(32)

SIDE VIEW

84"

(2134)

FLUSH

INSET

HEIGHT

1

/4"

(6)

24" (

610)

DEPTH TO CLEAT

263/16" (665)

FLUSH INSET DEPTH

23/16"

(56)

833/4"

(2127)

HEIGHT

T

O CLEAT

C

LEAT

T

WO UNITS WITH

3

/4" (19) P

ANEL

DETAIL A

DETAIL B

11/4"

(

32)

CLEAT

11/4"

(

32)

24" (

610)

OPENING

D

EPTH

TO CLEAT

CLEAT

T

OP VIEW

263/16"

(665)

F

LUSH

INSET

DEPTH

23/16"(56)

3" (

76)

typical

24" (610)

OPENING

DEPTH TO

CLEAT

11/4"

(32)

23/16"(56)

CLEAT

SHADED

A

REA

MUST BE

FINISHED

3" typical

(76)

4" (102)

3

subzero.com/specs

Dual Installation

FLUSH INSET INSTALLATION

Detail A

Opening Widths AB

Two 30" (762) Models 593/4" (1518) 621/4" (1581)

30" (762) and 36" (914) Models 653/4" (1670) 681/4" (1734)

Two 36" (914) Models 713/4" (1822) 741/4" (1886)

Detail B

IMPORTANT NOTE: Dimensions assume a3/4" (19) panel

thickness. A dual installation kit will be required for this installation.

Built-In Refrigeration 34

5

/8"

(16)

5

/16" (

8) 1

/2"

(13)

FLUSH INSET PANEL

SPACER

BACKER

DOOR / DRAWER / GRILLE

TOP VIEW

CABINETRY

DUAL T

RIM

1

/4" (6)

REVEAL

5

/16" (8)

1

/8" (3)

DOOR DOOR

TOP VIEW

1

/2"(13)

5

/16"

(

8)

1

/8"

(3)

CABINETRY

GRILLE

SIDE VIEW S

1

/2"(13)

3

/32"

(2)

5

/16"

(8)

5

/16"

(8)

5

/32"

(4)

GRILLE

DOOR

SIDE VIEW

5

/8"(16)

5

/32"

(4)

5

/16"

(8)

5

/16"

(8)

3

/32"

(2)

DOOR

DRAWER

SIDE VIEW SIDE VIEW

C

5

/16"

(8)

3

/32"

(2)

DOOR /

DRAWER

SIDE VIEW

Dual Installation

FLUSH INSET PANEL OFFSETS

When installing two built-in models side by side in a flush inset application, you must decrease the width of the decorative flush inset panels by panel offsets will also need to be made. These adjustments are needed to achieve a proper fit and to ensure the panels do not collide when closing. Panel dimensions in the chart below have been adjusted to reflect the decrease in panel dimensions.

IMPORTANT NOTE: If a filler strip is not used, dual instal-

lations can only be accomplished using two units with opposite hinges.

Illustrations A–F provide panel offsets and reveals for all built-in models in a flush inset application. Refer to the chart below for reference to the illustrations relating to your specific model. All reveals are wise specified.

1

/2" (13). Adjustments to the

1

/2" (13) unless other-

Illus. A Illus. B

For additional information on model-specific panel reveals, visit the specification library section of our website, subzerotrade.com.

Panel Offsets Illus.

ALL REFRIGERATOR / ALL FREEZER

Doors (hinge) / Grille Sides A Doors (handle) Sides B Grille Top C Grille Bottom / Door Top D Door Bottom F

OVER -AND-UNDER

Doors (hinge) / Drawer / Grille Sides A Doors (handle) Sides B Grille Top C Grille Bottom / Door Top D Door Bottom / Drawer Top E Drawer Bottom F

Do not exceed flush inset panel dimensions, as this could cause damage to panels and the Sub-Zero unit.

Illus. C Illus. D

Illus. E Illus. F

Built-In Refrigeration 35

H

W

H

W

AA

A

B

H

W

AA

A

H

W

subzero.com/specs

Dual Installation—Flush Inset Panels

BI-36R / BI-36F BI-36RG

BI-36R, BI-36RG and BI-36F

REFR IGERATOR / FREEZ ER WH

Flush Inset Panel 361/2" (927) 693/4" (1772) Spacer Panel 351/8" (892) 6815/16" (1751) Backer Panel 353/4" (908) 699/16" (1767)

GRIL LE WH

Flush Inset Panel 361/2" (927) 91/4" (235) Spacer Panel 351/8" (892) 85/16" (211) Backer Panel 353/4" (908) 815/16" (227)

BI-3 6RG WH

Window Cut-Out 25" (635) 541/8" (1375)

AB

Cut-Out Location 53/4" (146) 103/8" (264)

BI-30U / BI-36U BI-30UG / BI-36UG

BI-36U and BI-36UG

REFR IGERATOR WH

Flush Inset Panel 361/2" (927) 501/8" (1273) Spacer Panel 351/8" (892) 495/16" (1253) Backer Panel 353/4" (908) 4915/16" (1268)

FREE ZER WH

Flush Inset Panel 361/2" (927) 19" (483) Spacer Panel 351/8" (892) 181/16" (459) Backer Panel 353/4" (908) 1811/16" (475)

GRIL LE WH

Flush Inset Panel 361/2" (927) 91/4" (235) Spacer Panel 351/8" (892) 85/16" (211) Backer Panel 353/4" (908) 815/16" (227)

BI-3 6UG WH

Window Cut-Out 25" (635) 395/8" (1006)

BI-30U and BI-30UG

REFR IGERATOR WH

Cut-Out Location 53/4" (146) 51/4" (133)

Flush Inset Panel 301/2" (775) 501/8" (1273) Spacer Panel 291/8" (740) 495/16" (1253) Backer Panel 293/4" (756) 4915/16" (1268)

FREE ZER WH

Flush Inset Panel 301/2" (775) 19" (483) Spacer Panel 291/8" (740) 181/16" (459) Backer Panel 293/4" (756) 1811/16" (475)

GRIL LE WH

Flush Inset Panel 301/2" (775) 91/4" (235) Spacer Panel 291/8" (740) 85/16" (211)

Grille panel dimensions listed are for a standard 84" (2134) finished height. For an 83" (2108) finished height, subtract 1" (25) from grille panel height dimensions. For an 88" (2235) finished height, add 4" (102) to height dimensions. Width dimensions do not vary.

For dual wide grilles, refer to page 36.

Backer Panel 293/4" (756) 815/16" (227)

BI-3 0UG WH

Window Cut-Out 19" (483) 395/8" (1006)

AB

Cut-Out Location 53/4" (146) 51/4" (133)

AB

Built-In Refrigeration 36

Dual Installation Kit

INSTALLATION WITH DUAL WIDE GRILLE

This kit will replace the existing grilles that ship with the units and span the entire width of both units. The kit includes a

1

/4" (6) center trim strip (required for proper installation of the dual wide grille), heater, dual kickplate and mounting hardware. Dual wide grilles are available for all built-in models and design applications. The overlay dual installation kit with grille will accept overlay and dual

INSTALLATION WITH INDIVIDUAL GRILLES

This kit is available for those who choose to utilize the individual grilles that ship with each unit. The kit includes a

1

/4" (6) filler strip (which fills the reveal between the units and grilles), heater and mounting hardware. This dual installation kit is not required if a custom filler strip is used. The filler strip should be a minimum of 2" (51) wide. Refer to the full-scale template on page 42 for more information.

flush inset panels. For dual wide grille panel dimensions, refer to the panel specifications below for your design application. Grille panel dimensions listed are for a standard 84" (2134) finished height.

Dual Wide Grille—Overlay

TWO 30" (762) MODELS WH

Overlay Panel 601/4" (1530) 91/4" (235) Spacer Panel 593/8" (1508) 85/16" (211) Backer Panel 60" (1524) 815/16" (227)

762)

30" (

AND 36" (

Overlay Panel 661/4" (1683) 91/4" (235) Spacer Panel 653/8" (1661) 85/16" (211) Backer Panel 66" (1676) 815/16" (227)

TWO 36" (914) MODELS WH

Overlay Panel 721/4" (1835) 91/4" (235) Spacer Panel 713/8" (1813) 85/16" (211) Backer Panel 72" (1829) 815/16" (227)

914)

MODE LS WH

Dual Wide Grille—Flush Inset

TWO 30" (762) MODELS WH

Flush Inset Panel 611/4" (1556) 91/4" (235) Spacer Panel 593/8" (1508) 85/16" (211) Backer Panel 60" (1524) 815/16" (227)

30" (762) AND 36" (914) MOD ELS WH

Flush Inset Panel 671/4" (1708) 91/4" (235) Spacer Panel 653/8" (1661) 85/16" (211) Backer Panel 66" (1676) 815/16" (227)

TWO 36" (914) MODELS WH

Flush Inset Panel 731/4" (1861) 91/4" (235) Spacer Panel 713/8" (1813) 85/16" (211) Backer Panel 72" (1829) 815/16" (227)

Built-In Refrigeration 37

subzero.com/specs

Accessories

hese optional accessories are available through your

T authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com.

STANDARD HANDLE LENGTHS

Refer to the chart below for standard lengths of tubular, and pro handles used on built-in models.

• Flush inset front panels in stainless steel with handle

options.

• Framed front panels in stainless steel and white

enamel.

• Side panels in stainless steel and white enamel.

• Grilles for an 83" (2108) or 88" (2235) finished height.

• Extended framed handles.

• Tubular and pro handles to match the style of Wolf

ovens and ranges.

• Dual installation kits with and without dual wide grille.

• Retrofit kits for use with 600 series panels.

• Partial framed kit for dispenser models.

Standard Handle Lengths

ALL REFRIGERATOR / ALL FREEZ ER AND SIDE-BY-SIDE DOOR

Tubular Handle 637/8" (1622) Pro Handle 451/8" (1146) Stud Spacing 437/8" (1114)

BI-3 0U AND BI-30U G D OOR DRAWER

Tubular Handle 441/4" (1124) 245/16" (633) Pro Handle 371/2" (952) 21" (533) Stud Spacing 361/4" (921) 165/16" (414)

BI-3 6U AND BI-36U G D OOR DRAWER

Tubular Handle 441/4" (1124) 305/16" (770) Pro Handle 371/2" (952) 231/2" (597) Stud Spacing 361/4" (921) 225/16" (567)

Built-In Refrigeration 38

OPTIONAL EXTENDED F

ULL-LENGTH HANDLE

STANDARD FULL-LENGTH HANDLE

1

/4" (6) FRAMED PANEL

DOOR

1"

(25)

3"

(76)

11/4" (32) PANEL

1" (25) PANEL

1

/2" (13) PANEL

3

/4" (19) PANEL

2"

(51)

Framed Panel Thickness

FULL-SCALE TEMPLATE

PANEL THICKNESS

FRAMED APPLICATION

Built-In Refrigeration 39

1

/4" (6) BACKER PANEL

DOOR

DEPTH OF TUBULAR AND PRO HANDLES

1"

(25)

3"

(76)

11/4" (32) PANEL

1" (25) PANEL

3

/4" (19) PANEL

2"

(51)

.10" (3) SPACER PANEL

subzero.com/specs

Overlay Panel Thickness

FULL-SCALE TEMPLATE

Overlay and flush inset panels must be a minimum of5/8" (16) thick to support mounting the handle. Panel thickness does not include backer and spacer panel. Mount handle close to the opening edge of the door.

PANEL THICKNESS

OVERLAY AND FLUSH INSET APPLICATIONS

Built-In Refrigeration 40

237/8" (606)

TO REAR OF UNIT

OVERALL WIDTH OF UNIT

1

/

4

"

(3

2

)

1

/2

"

(3

8

)

1

3

/4

"

(4

4

)

0

"

(0

)

1"

(2

5

)

2"

(5

1

)

2

1

/4

"

(5

7

)

2

1

/2

"

(6

3

)

2

3

/4

"

(7

0

)

3

"

(7

6

)

3

1

/4

"

(8

3

)

3

1

/

2

"

(8

9

)

1

/

4

"

(6

)

1

/

2

"

(1

3

)

3

/

4

"

(1

9

)

3

/4" (19) THICK

OVERLAY PANEL

(TYPICAL)

1

/4" (6) BACKER

PANEL

1" (25) THICK

PANEL

1" (25)0"

SCALE

Overlay Application

FULL-SCALE TEMPLATE

DOOR OPENING 90°

TOP VIEW

Built-In Refrigeration 41

11/4" (

32)

A

SSUMES

3

/4" (

19)

F

LUSH INSET

PANEL

THICKNESS

23/16" (56)

24" (

610)

T

O BACK WALL

3

/4" (19) THICK

FLUSH INSET PANEL

(TYPICAL)

1

/4" (6) BACKER

PANEL

1" (25) THICK

PANEL

1" (25)0"

SCALE

subzero.com/specs

Flush Inset Application

FULL-SCALE TEMPLATE

For panels thicker than3/4" (19), a 90° door stop may be required to prevent interference with adjacent cabinets.

DOOR OPENING 110°

TOP VIEW

Built-In Refrigeration 42

11/4" (32)

F

ILLER STRIP

A

PPROX PROFILE OF

STAINLESS STEEL WRAPPED

DOOR AND HANDLE

DOOR

OPEN 110°

DOOR

CLOSED

1" (25)0"

SCALE

Dual Installation—Standard

FULL-SCALE TEMPLATE

Typical framed, overlay or stainless steel dual installation with filler strip at maximum 110° door opening. Depending on panel thickness, a 90° door stop may be required.

STANDARD

TOP VIEW

Built-In Refrigeration 43

11/2" (38)

1

/2" (13)

FILLER STRIP

PROFILE OF

3

/4" (19) FLUSH INSET PANEL

AND TUBULAR HANDLE

DOOR

CLOSED

DOOR

OPEN 110°

1" (25)0"

SCALE

subzero.com/specs

Dual Installation—Flush Inset

FULL-SCALE TEMPLATE

Typical flush inset dual installation with filler strip at maximum 110° door opening. Depending on panel thickness, a 90° door stop may be required.

FLUSH INSET

TOP VIEW

MODEL 648PRO

PRO 48 Refrigeration 45

48"

(1219)

84"

(

2134)

48"

(1219)

84"

(

2134)

subzero.com/specs

PRO 48 Refrigeration. Freshness finds unmistakable expression in the Sub-Zero PRO 48. An 800-pound monument

to food preservation—equal parts sculpted metal design statement and culinary secret weapon. Its vast interior, like its bold exterior, is crafted of stainless steel. The PRO 48 is available with or without a glass door and may be either built in or freestanding.

PRO 48 MODELS KEY FEATURES

• Can be used freestanding or installed as a standard or

flush built-in application.

• Handles coordinate with handles of Wolf ranges.

• Stainless steel interior as well as exterior.

• Dual refrigeration system enhanced with triple evapora-

tors allow independent control of storage conditions in refrigerator cabinet and drawer compartments.

648PRO 648PROG

• Advanced water filtration system.

• Exterior temperature display.

• Flip-up grille provides easy access for quick routine

maintenance.

• Star-K certified.

PRO 48 Refrigeration 46

48" (1219)

84"

(2134)

257/8" (657)

303/16" (

767)

4" (102)

301/2"

(775)

237/8"

(606)

421/8"

(

1070)

141/2"

(368)

303/4"

(781)

21" (533)

23/8" (60)

HEIGHT DIMENSIONS ±

1

/2" (13)

PRO 48 Models

OVERALL DIMENSIONS

MODELS 648PRO AND 648PROG

SPECIFICATIONS

Capacity / Weight

INTE RIOR CAPACITY R CU FT (L) F CU FT (L)

648PRO and 648PROG 18.4 (521) 11.7 (331)

SHIP PING WEIGHT L BS (KG)

648PRO 860 (390) 648PROG 875 (397)

PRO 48 Refrigeration 47

OPENING

D

EPTH

FRONT VIEWSIDE VIEW

T

OP VIEW

OPENING

WIDTH

OPENING

DEPTH

O

PENING

HEIGHT

subzero.com/specs

PRO 48 Models

STANDARD AND FLUSH BUILT-IN INSTALLATIONS

Opening Dimensions Standard Flush

Opening Width 471/2" (1206) 48" (1219)

Opening Height 833/4" (2127) 841/8" (2137)

Opening Depth 24" (610) 26" (660)

IMPORTANT NOTE: For standard built-in installations, the face frame of the unit will extend 2" (51) beyond cabinetry. In flush built-in installations, the front of the face frame will be flush with surrounding cabinetry.

PRO 48 Refrigeration 48

3" (76)

FRONT VIEW

FLOOR

53/16"

(132)

6"

(152)

FRONT VIEW

751/2"

(1918) FROM

FLOOR

7"

(178)

E

6"

(152)

Planning Information

RO 48 models can be used freestanding or installed as a

P standard or flush built-in application. For standard built-in installations, the face frame of the unit will extend 2" (51) beyond cabinetry. In flush built-in installations, the front of the face frame will be flush with surrounding cabinetry.

ELECTRICAL REQUIREMENTS

For PRO 48 models, the electrical supply should be located within the shaded area shown in the illustration below. Follow the National Electrical Code and local codes and ordinances when installing the receptacle. A separate circuit, servicing only this appliance, is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation.

Electrical Requirements

Power Supply 115 V AC, 60 Hz

Circuit Breaker 15 amp

Receptacle 3-prong grounding-type

PLUMBING REQUIREMENTS

PRO 48 models come with an automatic ice maker and an integrated water filtration system. The water supply line should be located within the shaded area shown in the illustration below. The water supply line should be connected to the house supply with an easily accessible shutoff valve between the supply and the unit. Do not use self-piercing valves. A saddle valve kit (4200880) is available through your authorized Sub-Zero dealer. The water line must not interfere with installation of the anti-tip brackets.

IMPORTANT NOTE: A reverse osmosis system can be

used provided there is constant water pressure of 35 psi (2.4 bar) to 120 psi (8.3 bar) supplied to the unit at all times. In this application, the integrated water filtration system must be set to bypass mode. This is achieved by removing the water filter cartridge. Refer to the PRO 48 installation guide packed with the unit for detailed instructions.

Location of electrical supply.

Plumbing Requirements

Water Supply Line

Water Pressure 35–120 psi (2.4–8.3 bar)

Excess Water Line for Connection 36" (914)

1

/4" OD copper line

Location of water supply.

PRO 48 Refrigeration 49

subzero.com/specs

Accessories

hese optional accessories are available through your

T authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com.

• Freestanding kit, which contains two stainless steel

side panels and top lid.

• Stainless steel side panel.

• Refrigerator drawer dividers for compartmentalized

storage.

• Stainless steel slide-out refrigerator bin.

• Dozen egg container.

• 90° door stop.

MODELS IC-27F, 427G (WINE) AND IC-27R

Integrated Refrigeration 51

36"

(914)

80"

(

2032)

36"

(914)

80"

(

2032)

36"

(914)

80"

(

2032)

2

7"

(686)

80"

(

2032)

2

7"

(686)

80"

(

2032)

2

7"

(686)

80"

(

2032)

34

1

/2"

(876)

27"

(

686)

34

1

/2"

(876)

27"

(

686)

34

1

/2"

(876)

27"

(

686)

2

27"

(686)

81"

(2057)

2

7"

(686)

81"

(

2057)

subzero.com/specs

Integrated Refrigeration. With custom cabinet fronts and hardware, Sub-Zero invented integrated columns, drawers

and tall units that disappear into the decor. Integrated units fit flush with other cabinets, making integrated refrigeration as practical and beautiful in the master suite, bar or theatre room as in the kitchen.

INTEGRATED MODELS

IC-27R

AVAILABLE 2ND QUARTER 2010

IC-27FI

AVAILABLE 2ND QUARTER 2010

736TR 736TFI 736TCI

KEY FEATURES

• Custom cabinet fronts and hardware allow for infinite

design options.

• Point-of-use refrigeration that can be placed anywhere

in the home.

• Dual refrigeration; two compressors preserve food’s

goodness in self-contained compartments.

700TR 700TFI 700TCI

700BR 700BF(I) 700BC(I)

• Energy efficient; many models are

qualified.

• Drawer models are Star-K certified.

ENERGY STAR

®

Integrated Refrigeration 52

27" (

686)

14"(

356)

15/8"

(41)

24"

(610)

81"

(2057)

TO TOP OF

OPENNG

24" (

610)

789/16"

(1995)

93/4"(248)

4"

(102)

1

/2" (13) ± ADJUSTMENT IN LEVELING LEGS

251/2"

(648)

45/8"

(117)

DIMENSIONS WILL VARY WITH PANELTHICKNESS

27" (686)

14"(

356)

13

/16"

(21)

341/2"

(876)

24"

(610)

203/8"

(518)

101/4"

(

260)

131/4"

(337)

DIMENSIONS WILL VARY WITH PANELTHICKNESS

1

/2"

(

13)

3

/8"

(10)

191/2"

(495)

251/2"

(648)

45/8"

(117)

80"

(2032)

TO TOP OF

OPENNG

24" (610)

789/16"

(

1995)

93/4"

(248)

4"

(102)

HEIGHT DIMENSIONS ±

1

/2" (13)

Overall Dimensions

COLUMN MODELS

27" (686) TALL MODELS

MODELS IC-27R AND IC-27FI

Overall dimensions do not include panels or handles.

MODELS 700TR, 700TFI AND 700TCI

Integrated Refrigeration 53

36" (914)

14"(356)

80"

(2032)

TO TOP OF

OPENNG

24" (610)

15/16"

(

33)

7713/16"

(1976)

341/2"

(

876)

24"

(610)

203/8"

(518)

101/4"

(260)

131/4"

(337)

93/4"

(248)

4"

(102)

DIMENSIONS WILL VARY WITH PANELTHICKNESS

1

/2"

(13)

3

/8"

(10)

191/2"

(495)

341/2"

(876)

7" (178)

HEIGHT DIMENSIONS ±

1

/2" (13)

subzero.com/specs

Overall Dimensions

36" (914) TALL MODELS

MODELS 736TR, 736TFI AND 736TCI

Integrated Refrigeration 54

27" (686)

341/2"

(

876)

24"

(610)

203/8"

(518)

DIMENSIONS WILL VARY WITH PANELTHICKNESS

1

/2"

(13)

3

/8"

(10)

191/2"

(495)

257/8" (657)

24" (

610)

93/4" (248)

4"

(102)

101/4"

(

260)

131/4"

(337)

H

EIGHT DIMENSIONS ±

1

/2" (13)

Overall Dimensions

DRAWER MODELS

Capacity and Weight

Interior Capacity R cu ft (

COLU MN MODELS

IC-27R 16.2 (459) IC-27FI 16.3 (462)

686)

27" (

TALL MODELS

700TR 15.5 (439) 700TFI 15.3 (433) 700TCI 10.2 (289) 5.1 (144)

914)

36" (

TALL MODELS

736TR 20.9 (592) 736TFI 21.5 (609) 736TCI 13.3 (377) 7.1 (201)

27" (686 ) DRAWER MODELS

700BR 5.3 (150) 700BF(I) 5.1 (144) 700BC(I) 2.9 (82) 2.1 (59)

Shipping Weight lbs (kg)

IC-27R, IC-27FI, 700TR, 700TFI and 700TCI 360 (163)

736TR, 736TFI and 736TCI 480 (218)

700BR, 700BF(I) and 700BC(I) 190 (86)

L)

F cu ft (

L)

MODELS 700BR, 700BF(I) AND 700BC(I)

Integrated Refrigeration 55

25" (

635)

OPENING

DEPTH

A

OPENING WIDTH

25" (635)

OPENING DEPTH

B

O

PENING

HEIGHT

T

OP VIEW

FRONT VIEWSIDE VIEW

subzero.com/specs

Opening Dimensions

INTEGRATED MODELS

IMPORTANT NOTE: The depth of each integrated model is

24" (610) from the front of the unit to its back. Your design may necessitate moving the unit back or cabinets forward to achieve a flush fit. This will require a minimum rough opening depth of 25" (635).

Opening Dimensions AB

IC-27R and IC-27FI 27" (686) 81" (2057)

700TR, 700TFI, 700TCI 27" (686) 80" (2032)

736TR, 736TFI, 736TCI 36" (914) 80" (2032)

700BR, 700BF(I), 700BC(I) 27" (686) 341/2" (876)

Integrated Refrigeration 56

13" (330)

1

/4"

(6)

41/2"

(

114

)

LEFT SIDE

OF OPENING

FLOOR

21/2"

(64)

FRONT VIEW

171/2" (445)

41/2"

(

114

)

FRONT VIEW

FLOOR

1

/4"

(6)

LEFT SIDE

OF OPENING

21/2"

(64)

Electrical Requirements

he electrical supply should be located within the shaded

T area shown in the illustrations. Follow the National Electrical Code and local codes and ordinances when installing the receptacle. A separate circuit, servicing only this appliance, is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation.

IMPORTANT NOTE: It is critical that the electrical outlet be

located within the shaded area shown so it does not interfere with installation of the anti-tip bracket. It must be flush with the back wall and positioned with the grounding prong to the right of the thinner blades.

Electrical Requirements

Power Supply 115 V AC, 60 Hz

Circuit Breaker 15 amp

Receptacle 3-prong grounding-type

27" (686) models. 36" (914) models.

Integrated Refrigeration 57

3" (76)

9"

(229)

3

/4"

(19)

FLOOR

21/2" (64)

FRONT VIEW

9"

(229)

6"

(152)

TOP VIEW

11/2"

(38)

21/2"

(64)

BACK WALL

1

3

1

/2"

(343)

3" (

76)

FRONT VIEW

3

/4"

(

19)

FLOOR

21/2" (

64)

1

3

1

/2"

(343)

T

OP VIEW

6"

(152)

11/2"

(

38)

21/2"

(64)

BACK W

ALL

subzero.com/specs

Plumbing Requirements

or integrated models with an automatic ice maker, the

F water supply line should be located through the floor or back wall, within the shaded area shown in the illustrations. The water supply line should be connected to the house supply with an easily accessible shut-off valve between the supply and the unit. Do not use self-piercing valves. A saddle valve kit (4200880) is available through your authorized Sub-Zero dealer.

IMPORTANT NOTE: It is critical that the water line be

located within the shaded area shown so it does not interfere with installation of the anti-tip bracket.

An in-line filter is required when water conditions have a high sediment content. The ice maker operates on constant water pressure between 20 psi (1.4 bar) and 100 psi (6.9 bar).

IMPORTANT NOTE: In some cases, a reverse osmosis

water filter system may not be able to maintain the minimum pressure consistently.

36" (914) models.

Plumbing Requirements

Water Supply Line

1

/4" OD copper line

Water Pressure 20–100 psi (1.4– 6.9 bar)

Excess Water Line for Connection 27" (686)

27" (686) models.

Integrated Refrigeration 58

A

4

5

3

/8"

(1153)

263/4" (

679)

PANELWIDTH

139/16"

(

345)

1611/16"

(424)

4" (102)

797/8"

(

2029)

341/2"

(876)

A

4

5

3

/8"

(1153)

353/4" (

908)

PANELWIDTH

139/16"

(

345)

1611/16"

(424)

27" (686)

FINISHED OPENING

4" (102)

36" (914)

FINISHED OPENING

797/8"

(

2029)

ALL REVEALS (A) ARE

1

/8" (3).

A

7

6

7

/8"

(1953)

263/4" (

679)

PANELWIDTH

4" (102)

807/8"

(

2054)

27" (686)

FINISHED OPENING

Cabinetry Applications

FRAMELESS CABINETRY

COLUMN MODELS

Typical Panel Dimensions

COLU MN MODELS WH

27" (686) MODELS

TALL AND DRAWER MODELS

36" (914) MODELS

TALL MODELS

Panel dimensions are based on a1/8" (3) reveal. A reveal of up

1

to

/4" (6) is possible with adjustments to panel dimensions.

Door 263/4" (679) 767/8" (1953)

27" (686) MODELS WH

Door 263/4" (679) 453/8" (1153) Top Drawer 263/4" (679) 139/16" (345) Bottom Drawer 263/4" (679) 1611/16" (424)

36" (914) MODELS WH

Door 353/4" (908) 453/8" (1153) Top Drawer 353/4" (908) 139/16" (345) Bottom Drawer 353/4" (908) 1611/16" (424)

Integrated Refrigeration 59

INTEGRATED UNIT

(SIDE VIEW)

11/2"

(38)

25" (635) TO WALL

HINGE

D

ECORATIVE VALANCE

CANNOT EXTEND BEYOND

THE FRONT OF THE MOLDING

DECORATIVE VALANCE

REMOVABLE MOLDING

TYPICAL

HEIGHT

OF DOOR

PANEL

MINIMUM

HEIGHT

OVERALL

HEIGHT

1

/8"(3)

1

/8"(3)

DOOR P

ANEL

25" (635) TO WALL

HEIGHT

OF PANEL

INTEGRATED UNIT

(

SIDE VIEW)

25/8" (67) TO 4" (102)

BASE MOLDING

MUST BE

REMOVABLE

KICKPLATE/ GRILLE CAN BE ADJUSTED

F

ORWARD

KICKPLATE/ GRILLE

4" (102) TO 9" (229)

FROM FLOOR

subzero.com/specs

Cabinetry Applications

DOOR PANEL HEIGHT

The height of the door panel can extend beyond the typical panel height, provided you do not exceed the panel weight limit. The illustration below shows how the panel may be extended and what you need to consider to finish the area behind the door panel.

IMPORTANT NOTE: The decorative valance used to finish

the area behind the door panel must stay behind the front plane of the finished molding.

TOE KICK CLEARANCE

The toe kick clearance can vary with the height of the panel. You must keep a minimum space of 4" (102) clear below the bottom edge of the panel for proper venting. In addition, any decorative base molding must be removable to clean the condenser and for service.

UPPER VALANCE

COLUMN AND TALL MODELS

KICKPLATE/GRILLE AREA

ALL INTEGRATED MODELS

Integrated Refrigeration 60

Cabinetry Applications

ntegrated refrigeration is compatible with virtually any

I style and look of cabinetry. These models can be used with framed as well as frameless cabinetry. Because of the precise application and the look you may want to achieve, keep the following considerations in mind:

The thickness of the front panels can vary. A minimum

5

/8" (16) thick panel is required, but the thickness can be increased provided the panel weight limit is not exceeded.

IMPORTANT NOTE: The depth of each integrated model is

24" (610) from the front of the unit to its back. You must allow for the thickness of the panel you are applying when planning for the finished rough opening depth if you want the front panel to be flush with surrounding cabinetry. You may have to move the unit back into drywall or bring the cabinets forward to achieve a flush fit.

Reveals between panels can vary. A reveal of typical, but reveals can be increased to up to

1

/8" (3) is

1

/4" (6).

As reveals between cabinetry and the unit decrease, the potential exists for severe finger pinching while the door is closing.

he inside edges of the rough opening

IMPORTANT NOTE:

T as well as the sides and a portion of the backside of the decorative panels will need to be finished, as they will be exposed when the doors are open.

D-style handles are recommended. For the cabinet door, handles must be located near the edge of the panel opposite the hinge, centered top to bottom. Locate handles in the top center area of the drawer panels.

Illustrations on the following pages show typical applications of frameless and framed cabinetry. Also refer to the full-scale illustration at the end of this section for specifics on door openings.

Panel Requirements

COLU MN MODELS MA X WEIGHT

Door Panel 65 lbs (29 kg)

TALL AND DRAWER MODELS MAX WEIGHT

27" (686) Door Panel 40 lbs (18 kg) 27" (686) Drawer Panel 12 lbs (5 kg) 36" (914) Door Panel 53 lbs (24 kg) 36" (914) Drawer Panel 16 lbs (7 kg)

PANEL THICKNE SS MINIMUM

All Panels

5

/8" (16)

When3/4" (19) or thicker panels are used with a reveal

1

of less than

/4" (6), door panels may cause damage to the unit when the door is opened to the maximum 105°. Use the built-in 90° door stop.

Integrated Refrigeration 61

DOOR

1

/8" (3)

REVEAL FINISHED

OPENING

INTEGRATED

UNIT

CABINET

PANEL

1

/8" (

3)

REVEAL FINISHED

OPENING

INTEGRATED

U

NIT

D

OOR

C

ABINET

PANEL

DOOR

CABINET

FINISHED OPENING

U

NIT

PANEL

1

/8" (3)

REVEAL

FINISHED OPENING

DOOR

INTEGRATED

U

NIT

CABINET

PANEL

1

/8" (3)

REVEAL

736TCI

subzero.com/specs

Cabinetry Applications

he illustrations below show typical applications of framed

T and frameless cabinetry. Refer to the full-scale templates at the end of this section for specifics on door openings.

Framed—full overlay. Framed—standard overlay.

Dual Installations

wo integrated units may be placed side by side in a dual

T installation. Depending on the models specified, opening widths will be 54" (1372), 63" (1600) or 72" (1829). Panel width dimensions will vary slightly from single installations. Refer to the chart below for typical panel dimensions. The dimensions are based on a

1

/4" (6) is possible with adjustments to panel dimensions.

Typical Panel Dimensions

COLU MN MODELS WH

Door 26

27" (686) MODELS WH

Door 2613/16" (681) 453/8" (1153) Top Drawer 2613/16" (681) 139/16" (345) Bottom Drawer 2613/16" (681) 1611/16" (424)

36" (914) MODELS WH

Door 3513/16" (910) 453/8" (1153) Top Drawer 3513/16" (910) 139/16" (345) Bottom Drawer 3513/16" (910) 1611/16" (424)

A dual installation kit is required for installations with 2" (51) or less space between the units. Dual installation kits are available through your authorized Sub-Zero dealer.

1

/8" (3) reveal. A reveal of up to

3

1

/16" (681) 767/8" (1953)

Framed—beaded inset. Frameless cabinetry.

IMPORTANT NOTE: If a 27" (686) unit is installed next to a

36" (914) tall unit, the decorative front panels will align, however, the face frames will not. This is only apparent when both doors are open at the same time. Due to a more robust hinge on 36" (914) units, the face frame was reconfigured to maintain a consistent overall panel height. Refer to the illustration below.

Face frame alignment.

Integrated Refrigeration 62

Accessories

hese optional accessories are available through your

T authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com.

STANDARD HANDLE LENGTHS

Refer to the chart below for standard lengths of tubular and pro handles used on integrated models.

• Stainless steel front panels with handles.

• Tubular and pro handles to match the style of Wolf

ovens and ranges.

• Crisper drawer with shelf assembly, deli drawer with

shelf and crisper cover with lid for certain models.

• Dual installation kit.

• Harness kit for Star-K compliance.

Standard Handle Lengths

COLU MNS DOOR

Tubular Handle 417/16" (1053) Pro Handle 391/2" (1003) Stud Spacing 383/8" (975)

27" (686) MODELS DOO R DRAWER

Tubular Handle 417/16" ( Pro Handle 391/2" ( Stud Spacing 383/8" (

36" (914) MODELS DOO R DRAWER

Tubular Handle 417/16" (1053) 32" (762) Pro Handle 391/2" (1003) 30" (533) Stud Spacing 383/8" (975) 283/4" (730)

1053)

1003)

975)

23" ( 21" (

193/4" (

584)

533)

502)

Integrated Refrigeration 63

1

/8" (3) MINIMUM REVEAL

LINE OF INTERFERENCE

SIDE MOLDING AND

INSTALLATION HARDWARE

INTEGRATED DOOR CLOSED

MOUNTING BRACKET

FRAMED PANEL

LINE OF INTERFERENCE

MAXIMUM 105° OPENING

3

/4" (19)

INTEGRATED

DOOR

MAXIMUM 105° OPENING

LINE OF

INTERFERENCE

1" (25)0"

SCALE

subzero.com/specs

Maximum Door Opening

FULL-SCALE TEMPLATE

If the panel is thicker than3/4" (19), use the built-in 90° door stop to prevent damage to the panel and face frame at the maximum door opening.

105° OPENING

TOP VIEW—1/4 SCALE

DOOR CLOSED

TOP VIEW—FULL-SCALE

MODEL WS-30

Wine Storage 65

2

7"

(686)

80"

(2032)

30"

(762)

84"

(2134)

2

7"

(686)

80"

(2032)

34

1

/16"

(

865)

15

1

/8"

(384)

24

1

/4"

(

616)

34

3

/16"

(868)

34"

(

864)

23

7

/8"

(606)

subzero.com/specs

Wine Storage. Wine finds a well-deserved place of honor in a Sub-Zero wine storage unit. Every detail is designed to

ensure better wine preservation. Cherrywood-faced shelves, soft lighting, custom cabinetry if desired—Sub-Zero helps make a wine collection an element of beauty in the home.

WINE STORAGE MODELS

315W 424G 424FS

KEY FEATURES

• Integrated, overlay, flush inset and stainless steel

design options.

• Full-view glass door standard on all models.

• Freestanding model 424FS does not require panels or

surrounding cabinetry.

• Discreet interior lighting with illuminated display shelf.

427G 427RG WS-30

• Two independent storage zones maintain temperature,

humidity and UV protection.

• Cherrywood shelf fronts display the wine beautifully.

• Rust-proof metal shelves accommodate 750 ml

bottles, half-bottles and magnums.

Wine Storage 66

237/8" (606) 24" (610)

34"

(864)

253/8"

(645)

4

"

(102)

23/8" (60)

151/8" (384) 24" (610)

341/16"

(865)

165/8"

(422)

4" (1 02)

23/8" (60)

Overall Dimensions

UNDERCOUNTER WINE STORAGE

MODEL 315W

Overall dimensions are based on stainless steel panels and handles.

MODEL 424G

Wine Storage 67

27" (686)

14"(356)

1

3

/16"

(21)

80"

(2032)

OPENING

HEIGHT

24" (610)

789/16"

(1995)

815/16"

(227)

4"

(102)

HEIGHT DIMENSIONS ±

1

/2" (13)

24"

(610)

DIMENSIONS WILL VARY WITH PANELTHICKNESS

251/2"

(648)

45/8"

(117)

27" (686)

14"(

356)

13

/16"

(21)

341/2"

(876)

203/8"

(518)

101/4"

(260)

131/4"

(337)

1

/2"

(13)

3

/8"

(10)

80"

(

2032)

OPENING

HEIGHT

24" (610)

789/16"

(1995)

93/4"

(248)

4"

(102)

HEIGHT DIMENSIONS ±

1

/2" (13)

24"

(610)

DIMENSIONS WILL VARY WITH PANELTHICKNESS

191/2"

(495)

251/2"

(648)

45/8"

(117)

subzero.com/specs

Overall Dimensions

FULL-SIZE WINE STORAGE

MODEL 427G MODEL 427RG

Overall dimensions do not include panels or handles.

WITH REFRIGERATOR DRAWERS

Wine Storage 68

30" (762)

8

4"

(2134)

24" (610)

4" (1 02)

733/4"

(

1873)

237/8"

(606)

311/4"

(796)

17"

(432)

237/8" (606)

23/8" (60)

HEIGHT DIMENSIONS ±

1

/2" (13)

Overall Dimensions

FULL-SIZE WINE STORAGE

Capacity and Weight

Storage Capacity Bottles (750 ml) R cu ft (L)

315W 26

424G 46

427G 132

427RG 78 5.3 (

WS-30 147

Shipping Weight lbs (

315W 118 (54)

424G 195 (

424FS 220 (100)

427G 395 (179)

427RG 410 (186)

WS-30 445 (202)

150)

kg)

88)

MODEL WS-30

Overall dimensions are based on the stainless steel model. For flush inset applications, add dimensions.

1

/2" (13) to door clearance

Wine Storage 69

24" (610)

OPENING

DEPTH

A

OPENING WIDTH

24" (

610)

OPENING DEPTH

341/2" (876)

OPENING

HEIGHT

T

OP VIEW

FRONT VIEWSIDE VIEW

25" (

635)

OPENING

DEPTH

27" (686)

OPENING WIDTH

25" (635)

OPENING DEPTH

80" (2032)

O

PENING

HEIGHT

T

OP VIEW

FRONT VIEWSIDE VIEW

subzero.com/specs

Opening Dimensions

UNDERCOUNTER WINE STORAGE

MODELS 315W AND 424G

FULL-SIZE WINE STORAGE

Opening Width A

315W 151/4" (387)

424G 24" (610)

MODELS 427G AND 427RG

IMPORTANT NOTE: The depth of each integrated model is

24" (610) from the front of the unit to its back. Your design may necessitate moving the unit back or cabinets forward to achieve a flush fit. This will require a minimum rough opening depth of 25" (635).

Wine Storage 70

24" (

610)

OPENING

DEPTH

FRONT VIEWSIDE VIEW

T

OP VIEW

291/2" (

746)

OPENING WIDTH

24" (610)

OPENING DEPTH

833/4"

(

2127)

OPENING

HEIGHT

Opening Dimensions

FULL-SIZE WINE STORAGE

Planning Information

ll wine storage models must be installed so that the door

A can open a minimum of 90° or you will have problems pulling the wine shelves out. For corner installations, you need to allow for a minimum 3" (76) filler so the door can open to 90°. If you are using larger-handle hardware, you will also need to take that into account. Refer to door clearance specifications.

For a maximum 90° door opening, use the door stop built into the hinge system of model 427G. A 90° door stop is shipped with model WS-30.

If you will be connecting the unit to a home security system, you must allow a minimum of 36" (914) of the system’s wiring to be routed in the electrical area designated for your model.

MODEL WS-30

Wine Storage 71

FRONT VIEW

151/2"

(394)

3" (76)

2" (51)

13" (330)

1

/4"

(6)

41/2"

(

114

)

LEFT SIDE

OF OPENING

FLOOR

21/2"

(64)

FRONT VIEW

751/2"

(1918) FROM

FLOOR

7"

(178)

E

6"

(152)

subzero.com/specs

Planning Information

DUAL INSTALLATIONS

If you are installing a wine storage unit next to an existing Sub-Zero unit, you may have to allow for a filler strip.

If you are installing a model 427G or 427RG next to an existing integrated unit, with 2" (51) or less between the units, an optional heater kit will need to be installed to prevent moisture from forming between the units. These optional heater kits are available through your authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com.

ELECTRICAL REQUIREMENTS

The electrical supply should be located within the shaded area shown in the illustration for your specific model. Follow the National Electrical Code and local codes and ordinances when installing the receptacle. A separate circuit, servicing only this appliance, is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation.

Electrical Requirements

Power Supply 115 V AC, 60 Hz

Circuit Breaker 15 amp

Receptacle 3-prong grounding-type

Model WS-30.

Models 315W and 424G. Models 427G and 427RG.

Wine Storage 72

Door Panels

nless you are installing a stainless steel model, you will

U need to provide a frame for the glass door. If you order a stainless steel unit, models 315W, 424G, 424FS and WS-30 will be shipped with their panels and hardware installed. For models 427G and 427RG, optional stainless steel panels or custom panels will need to be installed.

The glass door is designed to be exposed to room air circulation. Decorative overlays on the glass should be kept to a minimum. Also, rails and stiles can be increased in size but should not exceed the cabinet manufacturers’ standard width and cannot exceed the overall door panel dimensions listed in the charts.

The back sides of rails and stiles that will be visible through the glass door will need to be finished. Also, the inside edges of the frames must be finished to match the front surface.

FREESTANDING MODEL 424FS

Model 424FS does not require any panels or surrounding cabinetry. It has a beautiful stainless steel exterior that is designed to be used in a freestanding application.

Overlay Panels

MODELS 315W AND 424G

The overlay panel applied to models 315W and 424G should not be confused with the built-in overlay panel application. The overlay panel will consist of just a frame and would be either the you may be using. It is affixed directly to the door itself with screws through a series of predrilled holes in the door frame. A backer and spacer panel is not required.

Model 315W and 424G can be installed flush with surrounding cabinetry. Depending on the thickness of the overlay door panel, it may be necessary to install the unit so that it extends rounding cabinetry. This will prevent interference between the door panel and adjoining cabinetry at the maximum 145° door swing. Refer to the full-scale template at the end of this section.

Overlay Panels

PANEL DIMENSI ONS WH

315W 15" (381) 301/16" (764) 424G 233/4" (603) 301/16" (764)

MIN WIDTH

Stiles and Rails 21/4" (57)

MAX PANEL WEIGH T

Door Frame (315W) 10 lbs (5 kg) Door Frame (424G) 10 lbs (5 kg)

MIN PANEL THICK NESS

All Panels

5

/8" (16) or3/4" (19) thick panel

1

/4" (6) beyond the front surface of sur-

5

/8" (16)

Wine Storage 73

subzero.com/specs

Integrated Panels

MODELS 427G AND 427RG

The integrated full panels or frame panels for glass doors for these models will follow some of the identical planning processes used with the integrated line. The installation of the door panels is completely different, however. Rather than using the mounting hardware we used with the integrated line, door panels for both models 427G and 427RG will be applied with screws applied through our door.

The drawer panels for the model 427RG will be applied using the integrated technique of mounting brackets.

IMPORTANT NOTE: The depth of models 427G and

427RG is 24" (610) from the front of the unit to its back. You must allow for the thickness of the panel you are applying when planning for the finished rough opening depth if you want the front panel to be flush with surrounding cabinetry. You may have to move the unit back into the drywall or bring the cabinets forward. Refer to the integrated section.

Panel dimensions listed in the chart assume the models finish off at 80" (2032) in height overall and have a 4" (102) toe kick for the model 427G. If you finish off at 84" (2134), for instance, you must add an additional 4" (102) to the finished height of the panel and 4" (102) to the top rail. Likewise, if you allow for a 6" (152) toe kick for the model 427G, you must subtract 2" (51) from the bottom rail.

he height of the door panel for models 427G and 427RG

T can extend beyond the typical panel height, provided you do not exceed the panel weight limit. Refer to specifications on page 59 of the integrated section.

The toe kick area on model 427G cannot be larger than 6" (152), and on model 427RG, no larger than 9" (229). The toe kick area for either model cannot be less than 4" (102).

If you are installing an optional lock kit on models 427G or 427RG, you may have to order door panels that exceed the 80" (2032) finished height. Consult the lock kit installation instructions and see if your panels will allow for an adequate installation. These instructions are available on our website, subzero.com.

Integrated Panels

427G WH

Door 263/4" (679) 757/8" (1927)

427R G WH

Door 263/4" (679) 453/8" (1153) Top Drawer 263/4" (679) 139/16" (345) Bottom Drawer 263/4" (679) 1611/16" (424)

Panel Requirements

MIN WIDTH

Stiles 21/4" (57) Top Rail 33/4" (95) Bottom Rail (427G) 8" (203) Bottom Rail (427RG) 3" (76)

MAX PANEL WEIGH T

Door Frame 20 lbs (9 kg) Drawer Panel (427RG) 12 lbs (5 kg)

MIN PANEL THICK NESS

All Panels

5

/8" (16)

Wine Storage 74

TRIM

REVEAL

1

/4" (6) min

MAIN FRAME

ROUT TO

1

/4" (6)

DOOR

FRAME

GLASS

W

H

AA

A

Model WS-30

FRAMED PANEL

If the thickness of the framed panel is less than1/4" (6), it must be backed up with a sheet of shim material to build the total thickness to

1

/4" (6), a routed edge must be provided around the panel

1

/4" (6). If the panel is thicker than

to ensure a proper fit. Refer to the illustration below.

Routing, recessing or an extended handle may be required on raised panels for finger clearance under the handle.

IMPORTANT NOTE: Do not cover the glass door with a

solid panel. The window cut-out edges of the framed panel will need to be finished, as they will be exposed.

Framed Panel Requirements

MODE L WS-30

Max Panel Weight 75 lbs (34 kg) Min Panel Thickness

1

/4" (6)

FRAMED PANEL SPECIFICATIONS

WS-30 Framed

DOOR WH

Door Panel 293/4" (756) 699/16" (1767)

WIND OW WH

Cut-Out 231/2" (597) 635/16" (1608)

A

Location 31/8" (79)

Raised framed panel.

Wine Storage 75

1

/8"

(3)

OVERLAY PANEL

SPACER PANEL

BACKER PANEL

TRIM

5

/16" (8) min

DOOR FRAME

GLASS

1

/4" (6)

.10" (3)

OVERLAY

PANEL

SPACER

PANEL

BACKER

PANEL

3

/4"

(19)

typical

H

W

H

AA

A

subzero.com/specs

Model WS-30

OVERLAY PANEL

Overlay model WS-30 can be used in an overlay or flush inset application. The specific application will affect panel sizes, opening dimensions and the installation.

Overlay model WS-30 will be shipped without handle hardware and with an overlay panel grille as standard equipment. Along with the door panel, you will need to provide a panel for the grille and hardware to complement your surrounding cabinetry.

The overlay design allows the decorative panel to cover the door trim for a more seamless appearance. The most common way to achieve this look is to work with three panels—the decorative overlay panel, which is typically

3

/4" (19), a .10" (3) spacer panel and a1/4" (6) backer panel. Depending on your cabinet manufacturer, this could be one panel routed for different dimensions. The illustrations below will give you a better idea of the panel construction and how it interacts with our frame. The size of the overlay panel is critical, it must fit over the door frame.

IMPORTANT NOTE: Do not cover the glass door with a

solid panel. The window cut-out edges of the overlay, spacer and backer panels will need to be finished, as they will be exposed.

OVERLAY PANEL SPECIFICATIONS

WS-30 Overlay

DOOR WH

Overlay Panel 30" (762) 693/4" (1772) Spacer Panel 291/8" (740) 6815/16" (1751) Backer Panel 293/4" (756) 699/16" (1767)

GRIL LE WH

Overlay Panel 30" (762) 91/4" (235) Spacer Panel 291/8" (740) 85/16" (211) Backer Panel 293/4" (756) 815/16" (227)

WIND OW WH

Cut-Out 231/2" (597) 631/4" (1607)

A

Location 31/4" (83)

Overlay Panel Requirements

MODE L WS-30

Max Panel Weight 75 lbs (34 kg)

Min Panel Thickness

Panel assembly cross section. Panel assembly rear view.

5

/8" (16)

Grille panel dimensions listed are for a standard 84" (2134) overall height of the unit. For an 83" (2108) overall height, subtract 1" (25) from grille panel height dimensions. For an 88" (2235) overall height, add 4" (102) to height dimensions. Width dimensions do not vary.

Do not exceed overlay panel dimensions, as this could cause damage to panels and the Sub-Zero unit.

Wine Storage 76

9

/16"

(14)

FLUSH INSET PANEL

SPACER PANEL

BACKER PANEL

TRIM

5

/16" (8) min

1

/4" (6)

.10" (3)

FLUSH INSET

PANEL

SPACER

PANEL

BACKER

PANEL

3

/4"

(19)

typical

H

W

H

AA

A

Model WS-30

FLUSH INSET PANEL

Overlay model WS-30 used in a flush inset application allows the decorative panel to cover the door trim for a seamless appearance. The most common way to achieve this look is to work with three panels—the decorative flush inset panel, which is typically panel and a

1

/4" (6) backer panel. Depending on your

3

/4" (19), a .10" (3) spacer

cabinet manufacturer, this could be one panel routed for different dimensions. The illustrations below will give you a better idea of the panel construction and how it interacts with our frame. The size of the flush inset panel is critical, it must fit over the door frame.

IMPORTANT NOTE: Do not cover the glass door with a

solid panel. The inside edges of the rough opening as well as the sides and a portion of the back side of the decorative panels will need to be finished, as they will be exposed when the doors are open. The window cut-out edges of the overlay, spacer and backer panels will also need to be finished.

IMPORTANT NOTE: For flush inset panels thicker than

3

/4" (19), a 90° door stop may be required to prevent interference with adjacent cabinets.

Flush Inset Panel Requirements

MODE L WS-30

Max Panel Weight 75 lbs (34 kg)

Min Panel Thickness

5

/8" (16)

FLUSH INSET PANEL SPECIFICATIONS

WS-30 Flush Inset

DOOR WH

Flush Inset Panel 31" (787) 693/4" (1772) Spacer Panel 291/8" (740) 6815/16" (1751) Backer Panel 293/4" (756) 699/16" (1767)

GRIL LE WH

Flush Inset Panel 31" (787) 91/4" (235) Spacer Panel 291/8" (740) 85/16" (211) Backer Panel 293/4" (756) 815/16" (227)

WIND OW WH

Cut-Out 231/2" (597) 621/4" (1581)

A

Location 33/4" (95)

Grille panel dimensions listed are for a standard 84" (2134) overall height of the unit. For an 83" (2108) overall height, subtract 1" (25) from grille panel height dimensions. For an 88" (2235) overall height, add 4" (102) to height dimensions. Width dimensions do not vary.

Panel assembly cross section.

Do not exceed flush inset panel dimensions, as this could cause damage to panels and the Sub-Zero unit.

Panel assembly rear view.

Wine Storage 77

5

/8"

(16)

5

/16" (8)

1

/2"

(13)

FLUSH INSET PANEL

SPACER

BACKER

DOOR / DRAWER / GRILLE

TOP VIEW

CABINETRY

1

/2"(13)

5

/16"

(8)

1

/8"

(3)

CABINETRY

GRILLE

SIDE VIEW

1

/2"(13)

3

/32"

(2)

5

/16"

(8)

5

/16"

(8)

5

/32"

(4)

GRILLE

DOOR

SIDE VIEW

5

/16"

(8)

3

/32"

(2)

DOOR /

DRAWER

SIDE VIEW

WITHOUT FILLER STRIP

FILLER STRIP REQUIRED

subzero.com/specs

Model WS-30

FLUSH INSET PANEL

Illustrations A–D provide panel offsets and reveals for model WS-30 in a flush inset application. Refer to the chart below for reference to the illustrations.

For additional information on panel reveals, visit the specification library section of our website, subzerotrade.com.

Panel Offsets Illus.

MODE L WS-30

Door / Grille Sides A

Grille Top B

Grille Bottom / Door Top C

Door Bottom D

DUAL INSTALLATIONS

When two models WS-30 or a model WS-30 and built-in unit are installed side by side, a dual installation kit may be required. Contact your Sub-Zero dealer for the proper components and installation instructions. For questions relative to the installation, call Sub-Zero at 800-222-7820. To obtain local dealer information, visit the find a showroom section of our website, subzero.com.

DUAL STANDARD INSTALLATIONS

Two framed, overlay or stainless steel units may be placed side by side in a dual installation. Some dual standard installations will require a dual installation kit, available through your Sub-Zero dealer.

A custom filler strip can be used in between two units in a framed, overlay or stainless steel design application. It is recommended that the filler strip be at least 2" (51) wide, to prevent condensation between the units. Be sure to add the filler strip width to your rough opening width.

Dual installations without a filler strip can only be accomplished using two units with opposite hinges as shown in illustration A below. The dual installations shown in illustrations B and C require a filler strip.

Illus. A Illus. B

Illus. C Illus. D

IMPORTANT NOTE: For the application shown in illustra-

tion A, a dual installation accessory kit is required.

Illus. A

Illus. B Illus. C

Wine Storage 78

H

W

H

AA

A

WITHOUT FILLER STRIP

FILLER STRIP REQUIRED

Model WS-30

DUAL FLUSH INSET INSTALLATIONS

Installing two models WS-30 or a model WS-30 and built-in unit side by side in a flush inset application will require adjustments to the dimensions of your finished rough opening, panel sizes and panel offsets. It will also require a dual installation kit, available through your Sub-Zero dealer.

Dual installations without a filler strip can only be accomplished using two units with opposite hinges as shown in illustration A below. The dual installations shown in illustrations B and C require a filler strip. Illustration A is the only application that will accommodate the dual wide grille.

IMPORTANT NOTE: The application shown in illustration A

can only be achieved by installing dual flush inset panels. Failure to install dual flush inset panels will cause the handle side of the panels to collide when closing. In this application a dual installation accessory kit is also required.

Dual flush inset panels and dual installation kits are available through your Sub-Zero dealer. Refer to the illustration and chart for dual flush inset panel specifications.

DUAL FLUSH INSET PANEL SPECIFICATIONS

WS-30 Dual Flush Inset

DOOR WH

Flush Inset Panel 301/2" (775) 693/4" (1772) Spacer Panel 291/8" (740) 6815/16" (1751) Backer Panel 293/4" (756) 699/16" (1767)

GRIL LE WH

Flush Inset Panel 301/2" (775) 91/4" (235) Spacer Panel 291/8" (740) 85/16" (211) Backer Panel 293/4" (756) 815/16" (227)

WIND OW WH

Cut-Out 23" (584) 621/4" (1581)

A

Location 33/4" (95)

Illus. A

Grille panel dimensions listed are for a standard 84" (2134) overall height of the unit. For an 83" (2108) overall height, subtract 1" (25) from grille panel height dimensions. For an 88" (2235) overall height, add 4" (102) to height dimensions. Width dimensions do not vary.

Illus. B Illus. C

Wine Storage 79

5

/8"

(16)

5

/16" (8)

1

/2"

(13)

FLUSH INSET PANEL

SPACER

BACKER

D

OOR / DRAWER / GRILLE

TOP VIEW

CABINETRY

DUAL TRIM

1

/4" (6)

REVEAL

5

/16" (8)

1

/8" (

3)

DOOR DOOR

TOP VIEW

1

/2"(

13)

5

/16"

(8)

1

/8"

(

3)

C

ABINETRY

GRILLE

SIDE VIEW S

1

/2"(13)

3

/32"

(2)

5

/16"

(8)

5

/16"

(8)

5

/32"

(4)

GRILLE

D

OOR

SIDE VIEW

5

/16"

(8)

3

/32"

(2)

DOOR /

DRAWER

SIDE VIEW

subzero.com/specs

Model WS-30

DUAL FLUSH INSET PANELS

When installing two models WS-30 or a model WS-30 and built-in unit side by side in a flush inset application, you must decrease the width of the decorative flush inset panels by need to be made. These adjustments are needed to achieve a proper fit and to ensure the panels do not collide when closing. Panel dimensions in the chart below have been adjusted to reflect the decrease in panel dimensions.

1

/2". Adjustments to the panel offsets will also

IMPORTANT NOTE: If a filler strip is not used, dual instal-

lations can only be accomplished using two units with opposite hinges.

Illustrations A–E provide panel offsets and reveals for model WS-30 in a flush inset application. Refer to the chart below for reference to the illustrations. All reveals are

1

/2" (13) unless otherwise specified.

For additional information on panel reveals, visit the specification library section of our website, subzerotrade.com.

Do not exceed the flush inset decorative panel dimensions. Exceeding dimensions could cause damage to the panels and the Sub-Zero unit.

Panel Offsets Illus.

MODE L WS-30

Doors (hinge) / Grille Sides A

Doors (handle) Sides B

Grille Top C

Grille Bottom / Door Top D

Door Bottom E

Illus. A Illus. B

Illus. C Illus. D

Illus. E

Wine Storage 80

MAIN

FRAME

SIDE PANEL

ROUTING

1" (25)

17/8" (48)

1

/8" (3)

1

/2" (13)

84"

(2134)

24" (

610)

OPTIONAL

TOE KICK CUT-OUT

4" (102)

17/8"(48)

1" (25)

ROUT TO

1

/8" (3)

FRONT

OF SIDE

P

ANEL

25/8"

(67)

Side Panels

MODEL WS-30

When planning for side panels with the installation of the model WS-30, you need to be aware of the space configuration to achieve a pleasing fit. Depending on the exact panel you are using, the height of the panel may vary.

IMPORTANT NOTE: The use of side panels may change

the width of your rough opening.

When installing a model WS-30 with a custom side panel, an accessory kit (7003407) is required. Stainless steel side panels are also available through your authorized Sub-Zero dealer.

The side panel will need to be a minimum of 24" (610) deep and side panel dimensions. Routing will be necessary so that the side panel fits flush against the side of the unit.

1

/2" (13) thick. Refer to the illustrations below for

Handle Hardware

or overlay and integrated models, handle hardware must

F be provided. Optional stainless steel tubular and pro handles are available through your authorized Sub-Zero dealer.

The door frame has numerous mounting holes on each side to accommodate handle hardware. Using the predrilled holes to attach the handle will provide the best alignment and strength.

IMPORTANT NOTE: Refer to the full-scale template at the

end of this section for a profile of the door frame and position of the glass. Do not drill through the glass.

Side panel dimensions.

Routing detail.

Wine Storage 81

A

21/4" (57) Rail / Stile

Glass

A

C

L

Cabinet Door

Profile

subzero.com/specs

Accessories

hese optional accessories are available through your

T authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com.

• Front panels in stainless steel with handle options.

• Grilles for an 83" (2108) or 88" (2235) finished height

for model WS-30.

• Side panels in stainless steel and white enamel for

model WS-30.

• Tubular and pro handles to match the style of Wolf

ovens and ranges.

• Door lock kits.

• Dual installation kits.

• Harness kit for Star-K compliance.

STANDARD HANDLE LENGTHS

Refer to the chart below for standard lengths of tubular and pro handles used on wine storage models.

Door Frame Profile

FULL-SCALE TEMPLATE

The full-scale template below shows an example of the door frame profile for wine storage models and the relationship to the overlay panel (rails and stiles).

Dimension A

424G and 315W 1" ( 427G and 427RG WS-30

15

7

/8" (

/16" (

25)

22)

24)

Standard Handle Lengths

315W, 424G AND 424FS DOOR

Tubular Handle 23" (584)

Pro Handle 21" (533)

Stud Spacing 193/4" (502)

427G AND 427RG DOOR DRAWER

Tubular Handle 417/16" (1053) 23" (584)

Pro Handle 391/2" (1003) 21" (533)

Stud Spacing 383/8" (975) 193/4" (502)

WS-3 0 DOOR

Tubular Handle 637/8" (1622)

Pro Handle 451/8" (1146)

Stud Spacing 437/8" (1114)

DOOR FRAME PROFILE

MODEL 424G SHOWN

Wine Storage 82

A (WIDTH)

Maximum Thickness

FRONT VIEW

SIDE VIEW

1

/2" (38)

5

/8"

(16)

7

/64"

(3)

5

/64"

(2)

23

/64"

(9)

9

/16" (14)

27

/32"

(21)

Wine Shelf Wood Facing

FULL-SCALE TEMPLATE

For each model, the wine storage shelves have a natural cherrywood facing. You can replace these strips with wood more complementary to your design and surrounding cabinetry. Refer to the full-scale template below.

To remove the cherry strips, take the shelves out and remove the screws. Reverse the procedure to affix the new wood facing.

IMPORTANT NOTE: If you choose to stain or seal the

wood facing, be aware that some of these substances are hazardous and will damage stored wine.

Dimension A

315W 1015/16" (278) 424G and 424FS 191/2" (495) 427G and 427RG 2015/15" (532) WS-30 249/16" (624)

Dimensions will vary for model 315W. Refer to specifications on our website, subzero.com.

WINE SHELF WOOD FACING

WINE STORAGE MODELS

DOOR CLOSED

MODEL 424

3

/4" (19) DOOR PANEL

1

/2"

(13)

1

/8" (3)

MAXIMUM DOOR

OPENING 145°

1

/4" (6)

Wine Storage 83

1" (25)0"

SCALE

subzero.com/specs

Door Clearance

FULL-SCALE TEMPLATE

Model 424G should extend a minimum

1

of

/4" (6) beyond the front surface of adjoining cabinetry to allow for the maximum 145° door opening. The unit can be installed flush with adjacent cabinetry, however, there is potential for interference with the panel if the door is opened past 90°.

DOOR OPENING 145°

TOP VIEW

MODELS 424G (WINE) AND UC-24BG

Undercounter Refrigeration 85

34"

(864)

23

7

/8"

(606)

1

5"

(381)

3

5

/8"

(854)

33

5

/8"

(854)

15"

(381)

34"

(864)

23

7

/8"

(606)

2

3

7

/8"

(606)

34"

(

864)

2

3

7

/8"

(606)

34"

(

864)

subzero.com/specs

Undercounter Refrigeration. Sub-Zero undercounter refrigeration is a helpful addition to a master suite, bar, home

office or media room. In the kitchen, a high-volume ice maker is a must for entertaining. The design flexibility of these compact yet roomy units makes them all the more welcome in any room or outdoor kitchen. They’re ready to be fitted with a custom cabinet panel or can be ordered with a stainless steel panel.

UNDERCOUNTER MODELS

UC-24R UC-24BG UC-24C(I)

KEY FEATURES

• Overlay and stainless steel design applications.

• Handle options coordinate with handles of Wolf

cooking products.

• Models UC-24RO and UC-15I(P)O are rated for

outdoor use.

UC-24RO UC-15I(P) UC-15I(P)O

• Energy efficient; many models are ENERGY STAR

qualified.

• All models are Star-K certified.

®

Undercounter Refrigeration 86

237/8" (606) 24" (610)

34"

(864)

4" (1 02)

253/8"

(645)

23/8" (60)

143/4" (375) 23" (584)

3

5

/8"

(

854)

4" (1 02)

18"

(457)

Overall Dimensions

UNDERCOUNTER MODELS

MODELS UC-24R, UC-24BG, UC-24C(I) AND UC-24RO

Specifications

Capacity / Weight

INTE RIOR CAPACITY R CU FT (L) F CU FT (L)

UC-24R, UC-24BG and UC-24RO 5.7 (161) UC-24C(I) 3.6 (102) 1.1 (31)

ICE STORAGE CAPACITY LBS (KG)

UC-15I(P) and UC-15I(P)O 26 (12)

SHIP PING WEIGHT L BS (KG)

UC-24R, UC-24BG, UC-24C(I) and UC-24RO 130 (59) UC-15I(P) and UC-15I(P)O 100 (45)

MODELS UC-15I(P) and UC-15I(P)O

Model UC-15I overall dimensions do not include panel or handle.

Undercounter Refrigeration 87

24" (610)

O

PENING

D

EPTH

A

OPENING WIDTH

24" (610)

OPENING DEPTH

341/2" (876)

OPENING

HEIGHT

TOP VIEW

FRONT VIEWSIDE VIEW

FRONT VIEW

151/2"

(394)

3" (76)

2" (51)

subzero.com/specs

Opening Dimensions

UNDERCOUNTER MODELS

Planning Information

ELECTRICAL REQUIREMENTS

For ice maker models, the electrical supply can be located anywhere on the back wall. For all other undercounter models, locate the electrical supply within the shaded area shown in the illustration below. Follow the National Electrical Code and local codes and ordinances when installing the receptacle. A separate circuit, servicing only this appliance, is required.

IMPORTANT NOTE: Models UC-24RO and UC-15I(P)O are

designed and safe for use in outdoor applications. When installed outdoors, a ground fault circuit interrupter (GFCI) is required to reduce the risk of electrical shock. A GFCI is not recommended for use with other undercounter models and may cause interruption of operation.

Electrical Requirements

Power Supply 115 V AC, 60 Hz

Circuit Breaker 15 amp

Receptacle 3-prong grounding-type

Opening Width A

UC-24R, UC-24BG, UC-24C(I) and UC-24RO 24" (610)

UC-15I(P) and UC-15I(P)O 151/4" (387)

Location of electrical supply.

Undercounter Refrigeration 88

FRONT VIEW

SHADED AREA

EXTENDS

1

/2" (13)

FROM BACK WALL

151/2"

(394)

3" (76)

2" (51)

LOCATION OF

WATER LINE

8"

(203)

1

/2"

(13)

TOP VIEW

Planning Information

PLUMBING REQUIREMENTS

For model UC-24C(I) and the ice maker models, the water supply line should be located within the shaded area shown in the illustrations below. The water supply line should be connected to the house supply with an easily accessible shut-off valve between the supply and the unit. Do not use self-piercing valves. A saddle valve kit (4200880) is available through your authorized Sub-Zero dealer.

The ice maker operates on constant water pressure between 20 psi (1.4 bar) and 100 psi (6.9 bar).

IMPORTANT NOTE: In some cases, a reverse osmosis

water filter system may not be able to maintain the minimum pressure consistently.

Plumbing Requirements

Water Supply Line

Water Pressure 20–100 psi (1.4– 6.9 bar)

Excess Water Line for Connection 26" (660) min

1

/4" OD copper line

Overlay Panel

MODELS UC-24R, UC-24C(I) AND UC-15I(P)

The overlay design allows for a decorative panel to cover the door trim for a seamless appearance that will complement surrounding cabinetry. You may also choose to match the handle hardware of surrounding cabinetry. Refer to the charts for panel specifications.

MODEL UC-24BG

For model UC-24BG, the overlay door panel will consist of only a frame and will affix directly to the door with screws through a series of predrilled holes.

The glass area of the door is designed to be exposed to air circulation. Decorative overlays on the glass should be kept to a minimum. Do not install a solid panel on the glass door unit: this may cause moisture to form behind the panel. Refer to the charts for panel specifications.

IMPORTANT NOTE: The width of rails and stiles can be

increased but should not exceed cabinet manufacturers’ standard widths or the overall panel dimensions. The back sides of rails and stiles that will be visible through the glass door will need to be finished along with the inside edges of the frame.

Model UC-24C(I). Ice maker models.

Panel Dimensions

UC-2 4R AND UC-24C (I) WH

Overlay Panel 233/4" (603) 301/16" (764)

UC-2 4BG WH

Overlay Panel 233/4" (603) 301/16" (764) Rails and Stiles (min) 21/4" (57)

UC-1 5I(P) WH

Overlay Panel 15" (381) 303/8" (772)

Panel Requirements

MAX PANEL WEIGH T

UC-24R and UC-24C(I) 20 lbs (9 kg) UC-24BG 10 lbs (5 kg) UC-15I(P) 15 lbs (7 kg)

MIN PANEL THICK NESS

Overlay Panels

5

/8" (16)

Undercounter Refrigeration 89

151/4"min

(387)

OPENING WIDTH

TOP VIEW

FRONT VIEW

1

/8" (3)

DRAIN TUBE

WATER

INLET TUBE

SHUT-OFF

VALVE

DRAIN

TUBE

WATER

INLET

TUBE

SHUT-OFF

VALVE

DRAIN

151/4"min

(387)

OPENING WIDTH

TOP VIEW

FRONT VIEW

1

/8" (3)

DRAIN TUBE

SHUT-OFF

VALVE

AIR GAP

DEVICE

DRAIN TUBE

AIR GAP

DEVICE

WATER

INLET TUBE

SHUT-OFF

VALVE

WATER

INLET TUBE

subzero.com/specs

Drain Pump

he drain and inlet water tubes must be plumbed before

ICE MAKER MODELS

Undercounter ice maker models can be ordered with or without a pump. Models without a drain pump will drain water from the unit by gravity. A drain must be installed. Refer to the illustrations below.

A gravity drain model may be converted to a pump model through the installation of a drain pump kit available through your authorized Sub-Zero dealer. Installation instructions are included with the drain pump kit.

T connecting to the ice maker. For the gravity drain, all horizontal runs of drain lines must have a

1

/4" (6) per 12" (305) fall. An air gap will likely be required between the ice maker and the drain receptacle. A stand pipe with a trap below it would be acceptable for the drain receptacle.

IMPORTANT NOTE: Poor drainage will cause excessive ice

melting in the bin.

GRAVITY DRAIN

MODELS UC-15I AND UC-15IO

DRAIN PUMP

MODELS UC-15IP AND UC-15IPO

Undercounter Refrigeration 90

Glass

C

L

1"

(25) 1" (25)

21/4" (57) Rail/Stile

Door Panel Profile

Door Clearance

MODELS UC-24R, UC-24BG AND UC-24C(I)

Undercounter models can be installed flush with surrounding cabinetry. Depending on the thickness of the overlay door panel, it may be necessary to install the unit so that it extends

1

/4" (6) beyond the front surface of surrounding cabinetry. This will prevent interference between the door panel and adjoining cabinetry at the maximum 145° door swing. Refer to the full-scale template on page 83 of the wine storage section.

Accessories

These optional accessories are available through your authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com.

• Stainless steel front panels with handles.

• Tubular and pro handles to match the style of Wolf

ovens and ranges.

Door Frame Profile

FULL-SCALE TEMPLATE

The full-scale template shows the door frame profile for model UC-24BG and the relationship to the overlay panel (rails and stiles).

• Door lock.

• Drain pump kit.

STANDARD HANDLE LENGTHS

Refer to the chart below for standard lengths of tubular and pro handles used on undercounter models.

Standard Handle Lengths

UNDE RCOUNTER MODELS DOO R

Tubular Handle 23" (584) Pro Handle 21" (533) Stud Spacing 193/4" (502)

DOOR FRAME PROFILE

MODEL UC-24BG

Undercounter Refrigeration 91

191/2" (495)

Maximum Thickness

FRONT VIEW

SIDE VIEW

1

/2" (38)

5

/8"

(16)

7

/64"

(3)

5

/64"

(2)

23

/64"

(9)

9

/16" (14)

27

/32"

(21)

subzero.com/specs

Wine Shelf Wood Facing

FULL-SCALE TEMPLATE

For models UC-24BG and UC-24C(I), follow dimensions in the full-scale template below if you choose to replace the natural cherrywood facing of the wine shelves with wood more complementary to your design and surrounding cabinetry.

WINE SHELF WOOD FACING

MODELS UC-24BG AND UC-24C(I)

The information and images in this guide are the copyright property of Sub-Zero, Inc. Neither this guide nor any information or images contained herein may be copied or used in whole or in part without the express written permission of Sub-Zero, Inc. ©Sub-Zero, Inc. all rights reserved

.

Sub-Zero Products Limited Warranty

RESIDENTIAL USE ONLY

FULL FIVE YEAR SEALED SYSTEM WARRANTY

LIMITED SIXTH THROUGH TWELFTH YEAR WARRANTY ON THE SEALED SYSTEM

FULL TWO YEAR WARRANTY ON TOTAL PRODUCT*

FULL FIVE YEAR SEALED SYSTEM WARRANTY

For five years from the date of original installation, your Sub-Zero warranty covers all parts and labor to repair or replace any components that prove to be defective in materials or workmanship in the sealed system. The sealed system consists of the compressor, condenser, evaporator, drier and all connecting tubing.

FULL TWO YEAR WARRANTY*

For two years from the date of original installation, your Sub-Zero warranty covers all parts and labor to repair or replace any part of the product, that proves to be defective in materials or workmanship.

LIMITED SIXTH THROUGH TWELFTH YEAR SEALED SYSTEM WARRANTY

From the 6th through the 12th year from the date of original installation, your Sub-Zero warranty covers all parts that prove to be defective in materials or workmanship in the sealed system (parts only). The sealed system consists of the compressor, condenser, evaporator, drier and all connecting tubing.

TERMS APPLICABLE TO EACH WARRANTY

All service provided by Sub-Zero under the above warranty must be performed by a Sub-Zero authorized service center, unless otherwise specified by Sub-Zero. Service will be provided in the home during the normal business hours. This warranty applies only to products installed for normal residential use. Details regarding a non-residential warranty are available upon request.

The warranty applies only to products installed in any one of the fifty states of the United States, the District of Columbia or the ten provinces of Canada. This warranty does not cover any parts or labor to correct any defect caused by negligence, accident or improper use, maintenance, installation, service or repair, including but not limited to improper removal and reinstallation (whether in the unit or at a remote location) of the condensing unit.

THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES THAT SUB-ZERO WILL PROVIDE, EITHER UNDER THESE WARRANTIES OR UNDER ANY WARRANTY ARISING BY OPERATION OF LAW. SUB-ZERO WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM THE BREACH OF THESE WARRANTIES OR ANY OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other legal rights, which vary from state to state.

To receive parts and /or service and the name of the Sub-Zero authorized service center nearest you, contact Sub-Zero, Inc., P.O. Box 44848, Madison, WI 53744; check the contact & support section of our website, subzero.com or call 800-222-7820.

*Stainless steel doors, panels, product frames and interior surfaces are covered by a limited 60-day parts and labor warranty for cosmetic defects.

*Replacement water filters and air purification cartridges are not covered by the product warranty.

Sub-Zero Outdoor Products Limited Warranty

RESIDENTIAL USE ONLY

FULL FIVE YEAR SEALED SYSTEM WARRANTY

FULL ONE YEAR WARRANTY ON TOTAL PRODUCT*

FULL FIVE YEAR SEALED SYSTEM WARRANTY

For five years from the date of original installation, your Sub-Zero warranty covers all parts and labor to repair or replace any components that prove to be defective in materials or workmanship in the sealed system. The sealed system consists of the compressor, condenser, evaporator, drier and all connecting tubing.

FULL ONE YEAR WARRANTY*

For one year from the date of original installation, your Sub-Zero warranty covers all parts and labor to repair or replace any part of the product which proves to be defective in materials or workmanship.

TERMS APPLICABLE TO EACH WARRANTY

All service provided by Sub-Zero under the above warranty must be performed by a Sub-Zero authorized service center, unless otherwise specified by Sub-Zero. Service will be provided in the home during the normal business hours. This warranty applies only to products installed for normal residential use. Details regarding a non-residential warranty are available upon request.

The warranty applies only to products installed in any one of the fifty states of the United States, the District of Columbia or the ten provinces of Canada. This warranty does not cover any parts or labor to correct any defect caused by negligence, accident or improper use, maintenance, installation, service or repair, including but not limited to improper removal and reinstallation (whether in the unit or at a remote location) of the condensing unit.

THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES THAT SUB-ZERO WILL PROVIDE, EITHER UNDER THESE WARRANTIES OR UNDER ANY WARRANTY ARISING BY OPERATION OF LAW. SUB-ZERO WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM THE BREACH OF THESE WARRANTIES OR ANY OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other legal rights, which vary from state to state.

To receive parts and /or service and the name of the Sub-Zero authorized service center nearest you, contact Sub-Zero, Inc., P.O. Box 44848, Madison, WI 53744; check the contact & support section of our website, subzero.com or call 800-222-7820.

*Stainless steel doors, panels, product frames and interior surfaces are covered by a limited 60-day parts and labor warranty for cosmetic defects.

*Replacement water filters are not covered by the product warranty.

SU B- ZERO, INC. P. O. B OX 448 48 MADI SON, WI 5374 4 SUBZE RO .COM 80 0.222 .7 820

SZ DG 4/2 01 0

Sub-zero DESIGN BROCHURE

Specifications and Main Features

Frequently Asked Questions

User Manual