Sub-Zero BI-42S User Manual
Model BI-42S offers convenient side-byside refrigeration in a 42-inch width.
Sub-Zero dual refrigeration along with
new air purification and water filtration
systems guard the freshness of your
food and water like nothing before.
Framed, overlay/flush inset and stainless
steel models are available. A new flush
inset installation option allows the unit
to sit flush with surrounding cabinetry.
New Built-In Model BI-42S
Side-by-Side
Interior Features
Refrigerator
16.0 cu ft Capacity
Air Purification System
4 Adjustable Glass Shelves
1 Stationary Glass Shelf
1 High-Humidity Drawer with Divider
2 Storage Drawers with Divider
3 Adjustable Door Shelves
2 Stationary Door Shelves
Adjustable Dairy Compartment
Freezer
8.0 cu ft Capacity
Water Filtration System
Automatic Ice Maker
3 Adjustable Wire Shelves
1 Stationary Solid Shelf
3 Storage Drawers
5 Adjustable Door Shelves
Framed Model BI-42S.
Accessories
Louvered, panel and stainless steel grilles
for 83", 84" and 88" finished heights
Stainless steel front panels for framed and
flush inset applications with stainless steel
finish and handle options
Side panels in classic stainless steel and
white
Stainless steel tubular, pro or curved
handles and full-length extended handles
Dozen egg container with lid
90° door stop kit
Accessories are available through your Sub-Zero
dealer. To obtain local dealer information, visit the
Showroom Locator section of our website,
subzero.com.
Features
Framed, overlay/flush inset and
stainless steel design applications
Flush inset installation option allows unit
to sit flush with surrounding cabinetry
Air purification system
Water filtration system
Dual refrigeration system
Flip-up grille for easy access to condenser
Evenly-distributed bright interior lighting
Door shelves are adjustable in one-inch
increments
Crisper and deli drawers form a special
low-temperature zone
Informational freshness cards inside unit
Max ice feature to increase rate of ice
production for a 24-hour period
Exceeds tough Department of Energy
standards
This appliance is certified by Star-K
to meet strict religious regulations in
conjunction with specific instructions
found on www.star-k.org.
Flip-Up Grille Air Purification System
Model Options BI-42S/F BI-42S/O BI-42S/S/TH BI-42S/S/PH BI-42S/S/CH
Design Framed Overlay/Flush Inset Stainless Stainless Stainless
Grille Louvered Panel Stainless Stainless Stainless
Handle Full-Length * Tubular Pro Curved
*Handle not included to allow for design flexibility.
Model BI-48S shown.
Installation Notes
Built-In models may be used in a standard
installation or in a flush inset installation which
allows the unit to be flush with surrounding
cabinetry.
Complete installation specifications, including
panel sizes, can be found on our website,
subzero.com.
Specifications
Overall Dimensions 42"W x 84"H x 24"D
Door Clearance 265/16"
Opening Width 41
1
/2"
Flush Inset Width 44"
Opening Height 83
3
/4"
Flush Inset Height 84"
Opening Depth 24"
Flush Inset Depth 263/16"
Electrical Requirements 115 V AC, 60 Hz
15 amp circuit
Plumbing Requirements
1
/4" OD copper line
30–100 psi
Shipping Weight 541–582 lbs
Flush Inset Installation
*Anti-tip bracket must not interfere
with water line. Extend water line
approximately 36" from back wall.
**Dimensions based on
3
/4" (19)
panels.
Built-In Model BI-42S Installation Specifications
Standard Installation
*Anti-tip bracket must not interfere
with water line. Extend water line
approximately 36" from back wall.
Dimensions in parentheses are in
millimeters unless otherwise specified.
Unit dimensions may
vary by ±
1
/8" (3).
Overall Dimensions
42"
(1067)
84"
(2134)
24"
(610)
237/8"
(606)
BEHIND
FRAME
42"
(1067)
265/16"
(668)
421/4"
(1073)
*ANTI-TIP
BRACKET MUST NOT
INTERFERE
WITH WATER LINE.
REFER TO INSTALLATION
INSTRUCTIONS FOR COMPLETE
DETAILS.
EXTEND WATER LINE APPROX
36" (914) FROM BACK WALL.
24" (610)
OPENING
DEPTH
TOP VIEW
833/4"
(2127)
OPENING
HEIGHT
24" (610)
OPENING
DEPTH
18" (457)*
1
/2"
(13)
OUTLINE OF
FRAMED, OVERLAY
OR STAINLESS
STEEL MODEL
LOCATE
ELECTRICAL
WITHIN
SHADED AREA
411/2" (1054)
OPENING WIDTH
LOCATE WATER SUPPLY
WITHIN SHADED AREA
(152)
WATER LINE
SHUT-OFF
VALVE
7"
(178)
(152)
6"
E
6"
751/2"
(1918)
*ANTI-TIP
BRACKET MUST NOT
INTERFERE
WITH WATER LINE.
REFER TO INSTALLATION
INSTRUCTIONS FOR COMPLETE
DETAILS.
**ASSUMES
THICKNESS.
EXTEND WATER LINE APPROX
36" (914) FROM BACK WALL.
3
/4" (19) PANEL
24" (610)
OPENING
DEPTH
263/16" (665)
FLUSH INSET
DEPTH
1
/4" (6)
833/4"
(2127)
OPENING
HEIGHT
23/16"
(56)**
TOP VIEW
84"
(2134)
FLUSH
INSET
HEIGHT
23/16"
(56)**
23/16"
(56)
24" (610)
OPENING
DEPTH
FLUSH INSET
11/4"
(32)
3" (76)
1
/2"
(13)
OUTLINE
OF FLUSH INSET
APPLICATION WITH
3
/4" (19) PANEL
DETAIL
24" (610)
OPENING
DEPTH
11/4"
(32)
LOCATE WATER SUPPLY
WITHIN SHADED AREA
3" (76)
18"
(457)
W
FRONT VIEWSIDE VIEW
18" (457)*
WATER LINE
SHUT-OFF
LOCATE
ELECTRICAL
WITHIN
SHADED AREA
1
/4"
(6)
411/2" (1054)
OPENING WIDTH
44" (1118)
FLUSH INSET WIDTH
18"
(457)
W
FRONT VIEWSIDE VIEW
VALVE
7"
(178)
6"
(152)
6"
(152)
6"
(152)
6"
(152)
E
263/16"
(665)
FLUSH INSET
DEPTH
751/2"
(1918)
11/4"
(32)
Loading...