Sub Zero BI36RSPHLH, IT36CIIDLH, BI36FSPHLH, BI36FSTHLH, BI36ROLH Design Guide

DESIGN GUIDE

REVISED 8/ 2019

TABLE OF CONTENTS

3 CLASSIC REFRIGERATION

40 PRO REFRIGERATION

48 DESIGNER REFRIGERATION

58 WINE STORAGE

90 UNDERCOUNTER REFRIGERATION

100 SUB-ZERO WARRANTIES

Features and specications are subject to change at any time without notice. Visit subzero.com/specs for the most up-to-date information.

Throughout this guide, dimensions may vary by ±

1

/8" (3). Dimensions in parentheses are millimeters unless otherwise specied.

CLASSIC REFRIGERATION

subzero.com | 3

CLASSIC REFRIGERATION

Classic Refrigeration

For Classic refrigeration, Sub-Zero designers and engineers took a fresh look at everything, inside and out. Exterior renements include redesigned grilles and lower-prole hinges. Inside, new technology in food preservation makes Classic refrigeration nothing short of revolutionary.

CLASSIC MODELS

BI-36R BI-36RG BI-36F BI-30U BI-30UG BI-36U(ID) BI-36UG

BI-36UFD(ID) BI-42UFD(ID) BI-36S BI-42S(ID) BI-42SD BI-48S(ID)

I-48SD

B

4 | Sub-Zero Customer Care 800.222.7820

CLASSIC REFRIGERATION

Specications

INTERIOR CAPACITY—CU FT (L)

ALL REFRIGERATOR / ALL FREEZER REFR FRZR

BI-36R 23.5 (665) BI-36RG 23.4 (663) BI-36F 22.7 (643)

OVER-AND-UNDER REFR FRZR

BI-30U 13.2 (374) 4.2 (119) BI-30UG 13.1 (371) 4.2 (119) BI-36U(ID) 16.4 (464) 5.3 (150) BI-36UG 16.3 (462) 5.3 (150) BI-36UFD(ID) 15.7 (445) 5.3 (150) BI-42UFD(ID) 17.9 (507) 6.3 (178)

SIDE-BY-SIDE REFR FRZR

BI-36S 12.4 (351) 8.2 (232) BI-42S 16.3 (462) 8.0 (227) BI-42SID 15.8 (447) 7.9 (224) BI-42SD 16.0 (453) 7.9 (224) BI-48S 19.1 (541) 9.8 (278) BI-48SID 18.6 (527) 9.6 (272) BI-48SD 18.8 (532) 9.6 (272)

subzero.com | 5

CLASSIC REFRIGERATION

Classic Design Options

FRAMED

Choose framed custom door panels that contrast with the stainless steel full-length handles and louvered grille (shown). The framed application is an overlay model with framed design features. Panel, grille, and handle options are available.

Panels: Custom panels, stainless steel, or white enamel.

Grille: Classic louvered grille insert or solid custom panel

for 84" (standard), 83", or 88" overall unit height. Dual wide grille for dual installations.

Handles: Full-length standard or extended handles.

OVERLAY

Custom overlay door panels can be combined with unique handle hardware for design exibility. Shown with the pro handle option to complement Wolf ranges. Customize with panel, grille, and handle options.

Panels: Custom panels or stainless steel.

Grille: Solid custom panel or pro louvered grille for 84"

(standard), 83", or 88" overall unit height. Dual wide grille for dual installations.

Handles: Custom, tubular, or pro handles.

Framed

6 | Sub-Zero Customer Care 800.222.7820

Overlay

CLASSIC REFRIGERATION

Classic Design Options

FLUSH INSET

The ush inset design option allows for ush door and grille panels and custom handle hardware. Shown with the tubular handle option to match Wolf built-in ovens. The ush inset application is an overlay model with ush inset panels. Customize with panel, grille, and handle options.

Panels: Custom panels or stainless steel.

Grille: Solid custom panel or pro louvered grille for 84"

(standard), 83", or 88" overall unit height. Dual wide grille for dual installations.

Handles: Custom, tubular, or pro handles.

STAINLESS STEEL

Stainless steel models require no customization. To complement the look of Wolf ranges, choose the pro handle option (shown). Grille and handle options are available.

Grille: Pro louvered grille for 84" (standard), 83", or 88" overall unit height. Dual wide grille for dual installations.

Handles: Tubular or pro handles.

Flush inset

Stainless steel

subzero.com | 7

CLASSIC REFRIGERATION

Overall Dimensions

ALL REFRIGERATOR / ALL FREEZER

HEIGHT DIMENSIONS ±

237/8"

(606)

36"

(914)

1

/2" (13)

733/4"

(1873)

141/8"

(359)

84"

(2134)

4" (102)

263/16"

237/8"

(665)

(606)

Overall dimensions are based on stainless steel models.

1

For ush inset applications, add

/2" (13) to door clearance

dimensions.

371/4"

(946)

23/8" (60)

Model BI-36R, BI-36RG, BI-36F

8 | Sub-Zero Customer Care 800.222.7820

CLASSIC REFRIGERATION

Overall Dimensions

OVER-AND-UNDER

HEIGHT DIMENSIONS ±

237/8"

(606)

30" (762)

263/16" (665)

84"

(2134)

503/4"

(1289)

23"

(584)

1

/2"

(13)

121/8"

(308)

4" (102)

237/8" (606)

HEIGHT DIMENSIONS ±

237/8"

(606)

36" (914)

263/16" (665)

84"

(2134)

503/4"

(1289)

23"

(584)

1

(13)

/2"

141/8"

(359)

4" (102)

237/8" (606)

235/8"

(600)

Model BI-30U, BI-30UG

311/4"

23/8" (60)

(796)

235/8"

(600)

Model BI-36U(ID), BI-36UG

371/4"

23/8" (60)

(946)

subzero.com | 9

CLASSIC REFRIGERATION

Overall Dimensions

OVER-AND-UNDER

HEIGHT DIMENSIONS ±

8"

(203)

36" (914)

263/16" (665)

84"

(2134)

503/4"

(1289)

23"

(584)

1

(13)

/2"

237/8"

(606)

4" (102)

237/8" (606)

HEIGHT DIMENSIONS ±

9"

(229)

42" (1067)

1

/2" (13)

503/4"

(1289)

23"

(584)

237/8"

(606)

84"

(2134)

4" (102)

263/16" (665)

237/8" (606)

235/8"

191/2"

(600)

(495)

23/8" (60)

Model BI-36UFD(ID)

10 | Sub-Zero Customer Care 800.222.7820

23/8" (60)

Model BI-42UFD(ID)

235/8"

(600)

221/4"

(565)

CLASSIC REFRIGERATION

Overall Dimensions

SIDE-BY-SIDE

HEIGHT DIMENSIONS ±

71/4"

(184)

36" (914)

1

/2" (13)

733/4"

(1873)

83/4"

(222)

84"

(2134)

4" (102)

237/8"

(606)

263/16" (665)

237/8" (606)

HEIGHT DIMENSIONS ±

71/2"

(191)

42" (1067)

1

/2" (13)

733/4"

(1873)

103/8"

(264)

84"

(2134)

4" (102)

237/8"

(606)

263/16" (665)

237/8" (606)

Model BI-36S

221/4"

(565)

23/8" (60)

Model BI-42S(ID), BI-42SD

261/4"

(668)

23/8" (60)

subzero.com | 11

CLASSIC REFRIGERATION

48" (1219)

84"

(2134)

4"

(102)

733/4"

(1873)

237/8" (606)

237/8"

(606)

30"

(762)

115/8"

(295)

83/8"

(213)

23/8" (60)

HEIGHT DIMENSIONS ±

1

/2" (13)

263/16" (665)

Overall Dimensions

SIDE-BY-SIDE

Model BI-48S(ID), BI-48SD

12 | Sub-Zero Customer Care 800.222.7820

CLASSIC REFRIGERATION

Specications

SHIPPING WEIGHT

ALL REFRIGERATOR / ALL FREEZER LB (KG)

BI-36R 420 (191) BI-36RG 430 (195) BI-36F 406 (184)

OVER-AND-UNDER LB

BI-30U 462 (210) BI-30UG 476 (216) BI-36U(ID) 515 (234) BI-36UG 529 (240) BI-36UFD(ID) 529 (240) BI-42UFD(ID) 582 (264)

SIDE-BY-SIDE LB

BI-36S 538 (244) BI-42S 582 (264) BI-42SID 608 (276) BI-42SD 608 (276) BI-48S 630 (286) BI-48SID 656 (298) BI-48SD 656 (298)

Shipping weights are based on stainless steel models.

(KG)

subzero.com | 13

CLASSIC REFRIGERATION

NOTE: Shaded line represents profile of unit

SIDE

Opening Dimensions

STANDARD INSTALLATION

833/4"

(2127)

OPENING

HEIGHT

24" (610)

OPENING

DEPTH

TOP VIEW

W

OPENING WIDTH

31/2" (89)

FINISHED

RETURN

W

31/2"

FINISHED

RETURN

W

FRAMELESS

CABINETRY

(89)

FRAMED

CABINETRY

3

/4" (19)

TYPICAL

3

(19)

/4"

TYPICAL

FILLER

VIEW

31/2" (89) finished returns will be visible and should be finished to match cabinetry.

OPENING WIDTH

30" Model 291/2" (749)

36" Model 351/2" (902)

42" Model 411/2" (1054)

48" Model 471/2" (1206)

14 | Sub-Zero Customer Care 800.222.7820

FRONT VIEW

.

W

If an 83" (2108) grille height is specied, the opening height

7

must be decreased by specied, the opening height must be increased by 4"

/8" (22). If an 88" (2235) grille height is

(102).

If two units are installed side by side, refer to page 16 for dual standard installations.

CLASSIC REFRIGERATION

NOTE: Shaded line represents profile of unit with

SIDE

Opening Dimensions

FLUSH INSET INSTALLATION

263/16"

(665)

FLUSH

INSET

23/16"

DEPTH

(56)

FINISHED

CLEATS

511/16"

(145)

FINISHED

RETURN

31/2"

(89)

CLEAT

3

/4" (19)

TYPICAL

VIEW

1

/4"

(6)

84"

(2134)

FLUSH

INSET

HEIGHT

TOP VIEW

11/4"

(32)

FLUSH INSET WIDTH

FRONT VIEW

W

FRAMELESS

CABINETRY

31/2"

511/16"

(89)

(145)

FINISHED

RETURN

W

FRAMED

CABINETRY

CLEAT

FILLER

3

/4" (19)

TYPICAL

31/2" (89) finished returns and shaded areas will be visible and should be finished to match cabinetry.

FLUSH INSET WIDTH

30" Model 32" (813)

36" Model 38" (965)

42" Model 44" (1118)

48" Model 50" (1270)

3/4" (19) panel.

W

Flush inset is available for overlay models only.

3

Dimensions assume a

If an 83"

(2108) grille height is specied, the ush inset

height must be decreased by

/4" (19) panel thickness.

7

/8" (22). If an 88" (2235) grille

height is specied, the ush inset height must be increased

(102).

by 4"

If two units are installed side by side, refer to page 17 for dual ush inset installations.

subzero.com | 15

CLASSIC REFRIGERATION

NOTE: Shaded line represents profile of unit

SIDE

Opening Dimensions

DUAL STANDARD INSTALLATION

833/4"

(2127)

OPENING

HEIGHT

24" (610)

OPENING

DEPTH

TOP VIEW

W

OPENING WIDTH

31/2" (89)

FINISHED

RETURN

W

31/2"

FINISHED

RETURN

W

FRAMELESS

CABINETRY

(89)

FRAMED

CABINETRY

3

/4" (19)

TYPICAL

3

(19)

/4"

TYPICAL

FILLER

VIEW

31/2" (89) finished returns will be visible and should be finished to match cabinetry.

DUAL OPENING WIDTH

Two 30" Models 593/4" (1518)

30" and 36" Models 653/4" (1670)

Two 36" Models 713/4" (1822)

16 | Sub-Zero Customer Care 800.222.7820

FRONT VIEW

.

W

A dual installation kit is required for this installation.

CLASSIC REFRIGERATION

SIDE

NOTE: Shaded line represents profile of unit with

Opening Dimensions

DUAL FLUSH INSET INSTALLATION

263/16"

(665)

FLUSH

INSET

23/16"

DEPTH

(56)

FINISHED

CLEATS

511/16"

(145)

FINISHED

RETURN

31/2"

(89)

CLEAT

3

/4" (19)

TYPICAL

VIEW

1

/4"

(6)

84"

(2134)

FLUSH

INSET

HEIGHT

11/4"

(32)

TOP VIEW

W

FLUSH INSET WIDTH

FRONT VIEW

511/16"

(145)

FINISHED

RETURN

W

FRAMELESS

CABINETRY

31/2"

(89)

W

FRAMED

CABINETRY

CLEAT

FILLER

3

/4" (19)

TYPICAL

31/2" (89) finished returns and shaded areas will be visible and should be finished to match cabinetry.

DUAL FLUSH INSET WIDTH

Two 30" Models 621/4" (1581)

30" and 36" Models 681/4" (1734)

Two 36" Models 741/4" (1886)

3/4" (19) panel.

W

Flush inset is available for overlay models only.

3

Dimensions assume a

/4" (19) panel thickness. A dual instal-

lation kit is required for this installation.

subzero.com | 17

CLASSIC REFRIGERATION

Electrical Requirements

The electrical supply should be located within the shaded area shown in the illustration below. A separate circuit servicing only this appliance is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation.

Installation must comply with all applicable electrical codes.

ELECTRICAL REQUIREMENTS

Electrical Supply 115 VAC, 60 Hz

Service 15 amp dedicated circuit

Receptacle 3-prong grounding-type

7"

E

(178)

6"

(152)

751/2" (1918)

FROM FLOOR

Plumbing Requirements

Locate the water supply line within the shaded area shown in the illustration below. Connect the water supply line to the house supply with an easily accessible shut-off valve. Do not use self-piercing valves. The water supply line must not interfere with the installation of the anti-tip brackets.

A reverse osmosis system can be used provided there is constant water pressure of 35–120 psi to the unit at all times. A copper line is not recommended for this application.

Installation must comply with all applicable plumbing codes.

PLUMBING REQUIREMENTS

Water Supply

Pressure 35–120 psi

Excess Line for Connection 36" (914)

RIGHT SIDE

OF OPENING

1

/4" OD copper, braided stainless

(2.4–8.3 bar) supplied

steel, or PEX tubing

(2.4–8.3 bar)

RIGHT SIDE

OF OPENING

Electrical supply location

18" (457)

AREA EXTENDS

FORWARD ON FLOOR

1

/2" (13)

6" (152)

3" (76)

Water supply location

18 | Sub-Zero Customer Care 800.222.7820

CLASSIC REFRIGERATION

Custom Panels

For framed, overlay, and ush inset applications, custom door panels must be provided. Handle hardware must also be provided for overlay and ush inset applications. Refer to Panel Requirements below and the charts on pages 22–27 for custom panel dimensions for your specic design application.

IMPORTANT NOTE: Do not cover a glass door with a solid

panel.

Finish all sides of the custom panels. They may be visible when the door is open or through the window of glass door models.

PANEL REQUIREMENTS

WEIGHT PER PANEL MAX

BI-36R, BI-36RG, BI-36F 75 lb (34 kg) All Other Models 50 lb (23 kg) Grille Panel 13 lb (6 kg)

PANEL THICKNESS MIN

Framed Overlay and Flush Inset

1

/4" (6)

5

/8" (16)

FRAMED PANELS

The framed application is an overlay model with framed design features. It is not a separate model.

1

If the custom panel is thinner than

/4" (6), a ller material

must be added to achieve a proper t. If the panel is thicker

1

/4" (6), rout an edge around the panel or mount the

than custom panel on a sheet of

1

/4" (6) thick material and insert

into the channel. Refer to the illustrations below.

Routing, recessing, or optional extended handles may be required for nger clearance. Refer to the full-scale template on page 34.

When installing two units side by side, refer to page 16 for dual standard installations.

1

/4" (6) TRIM REVEAL

1

/4" (6) PANEL

DOOR

1

/4" (6) min

ROUT TO

DOOR

1

/4" (6)

Panel 1/4" thick or less

Panel thicker than 1/4"

subzero.com | 19

CLASSIC REFRIGERATION

Custom Panels

PARTIAL FRAMED OPTION

The partial framed kit includes a stainless steel panel for above and below the external dispenser. Refer to the chart below for panel width. The kit is avail able through an authorized Sub-Zero dealer. For local dealer information, visit the nd a showroom section of our website, subzero.com.

PARTIAL FRAMED PANEL

BI-42SD 151/16" (383)

BI-48SD 183/4" (476)

PANEL MOUNTING KIT

The Sub-Zero custom panel mounting kit eliminates the need for the backer and spacer panels and is avail able through an authorized Sub-Zero dealer. For local dealer information, visit the nd a showroom section of our website, subzero.com. The kit consists of mounting cleats, screws, and gages used to properly position the cleats. The kit is available for all

W

Classic models except glass door models. Dual installations require two mounting kits.

OVERLAY PANELS

Overlay panels are typically created by combining a 3/4" (19) custom panel, a .10"

(3) spacer panel, and a

1

/4" (6) backer

panel. Refer to the illustrations below.

When installing two units side by side, refer to page 16 for dual standard installations.

SPACER PANEL

CUSTOM PANEL

CUSTOM

PANEL

SPACER

PANEL

BACKER PANEL

TRIM

5

/16" (8) min

1

/8" (3) (OVERLAY)

3

/4"

(19)

typical

.10" (3)

1

/4" (6)

BACKER

PANEL

Panel assembly (cross section) Panel assembly (rear view)

20 | Sub-Zero Customer Care 800.222.7820

CLASSIC REFRIGERATION

61/4" (159)

1

/4"

(6)

127/8"

(327)

Custom Panels

FLUSH INSET PANELS

The ush inset application is an overlay model with ush inset panels. It is not a separate model.

The ush inset design allows custom panels to be installed ush with adjacent cabinets. Similar to overlay, ush inset

3

panels are typically created by combining a panel, a .10"

(3) spacer panel, and a

1

/4" (6) backer panel.

/4" (19) custom

Refer to the illustrations for overlay panels.

3

For ush inset panels thicker than

/4" (19), a 90° door stop may be required to prevent interference with adjacent cabinets. Refer to the full-scale templates at the end of this guide.

When installing two units side by side, refer to page 17 for dual ush inset installations.

ICE AND WATER DISPENSER

For models BI-42SD and BI-48SD, the refrigerator door panel must include a cutout to accommodate the external

1

dispenser. The bezel will accommodate a

3

for framed applications and a

/4" (19) thick panel for overlay and ush inset applications. Panels thicker than must be routed in the dispenser area to 1

/4" (6) thick panel

3

1

/4" (19)

/8" (29) (including

backer and spacer panels).

Dispenser dimensions

subzero.com | 21

CLASSIC REFRIGERATION

H

W

AA

A

H

W

AA

A

B

H

W

H

W

W W

H

W

AA

A

H

W

W W

H

W

AA

A

H

W

H

W

W W

H

W

W W

Framed Panel Dimensions

W

BI-36R, BI-36F

H

A

H

B

W

BI-36RG

H

AA

BI-30U, BI-36U(ID)

MODEL BI-36R, BI-36RG, BI-36F

REFRIGERATOR / FREEZER W H

Door Panel 353/4" (908) 699/16" (1767)

GRILLE (OPTIONAL) W H

Grille Panel 353/4" (908) 815/16" (227)

BI-36RG A B

Stiles / Rails 53/16" (132) 105/16" (262)

MODEL BI-30U, BI-30UG

REFRIGERATOR W H

Door Panel 293/4" (756) 4915/16" (1268)

FREEZER W H

Drawer Panel 293/4" (756) 1811/16" (475)

GRILLE (OPTIONAL) W H

Grille Panel 293/4" (756) 815/16" (227)

BI-30UG A

Stiles / Rails 53/16" (132)

H

A

H

A

H

W

BI-30UG, BI-36UG

H

AA

H

W W

H

BI-36UFD(ID), BI-42UFD(ID)

MODEL BI-36U(ID), BI-36UG

REFRIGERATOR W H

Door Panel 353/4" (908) 4915/16" (1268)

FREEZER W H

Drawer Panel 353/4" (908) 1811/16" (475)

GRILLE (OPTIONAL) W H

Grille Panel 353/4" (908) 815/16" (227)

BI-36UG A

Stiles / Rails 53/16" (132)

MODEL BI-36UFD(ID)

REFRIGERATOR (2 PANELS) W H

Door Panel 175/8" (448) 4915/16" (1268)

FREEZER W H

Drawer Panel 353/4" (908) 1811/16" (475)

GRILLE (OPTIONAL) W H

Grille Panel 353/4" (908) 815/16" (227)

H

W

22 | Sub-Zero Customer Care 800.222.7820

MODEL BI-42UFD(ID)

REFRIGERATOR (2 PANELS) W H

Door Panel 205/8" (524) 4915/16" (1268)

FREEZER W H

Drawer Panel 413/4" (1060) 1811/16" (475)

GRILLE (OPTIONAL) W H

Grille Panel 413/4" (1060) 815/16" (227)

CLASSIC REFRIGERATION

H

W

AA

A

H

W

H

W

AA

A

B

H

W

H

WW

B

A

H

W

W W

H

W

AA

A

H

W

AA

A

B

H

W

H

W

W W

Framed Panel Dimensions

H

A

B

W

BI-36S, BI-42S(ID),

W

WW

BI-42SD, BI-48SD

BI-48S(ID)

MODEL BI-36S

REFRIGERATOR W H

Door Panel 1913/16" (503) 699/16" (1767)

FREEZER W H

Door Panel 157/16" (392) 699/16" (1767)

GRILLE (OPTIONAL) W H

Grille Panel 353/4" (908) 815/16" (227)

MODEL BI-42S, BI-42SID, BI-42SD

REFRIGERATOR W H

Door Panel 2413/16" (630) 699/16" (1767)

FREEZER W H

Door Panel 167/16" (418) 699/16" (1767)

GRILLE (OPTIONAL) W H

Grille Panel 413/4" (1060) 815/16" (227)

BI-42SD W H

Dispenser Cutout* 57/8" (149) 127/16" (316)

A B

Cutout Location 17/8" (48) 283/4" (730)

H

MODEL BI-48S, BI-48SID, BI-48SD

REFRIGERATOR W H

Door Panel 281/2" (724) 699/16" (1767)

FREEZER W H

Door Panel 183/4" (476) 699/16" (1767)

GRILLE (OPTIONAL) W H

Grille Panel 473/4" (1213) 815/16" (227)

BI-48SD W H

Dispenser Cutout* 57/8" (149) 127/16" (316)

Cutout Location 17/8" (48) 283/4" (730)

*For models BI-42SD and BI-48SD, panel thickness in dispenser area can range from landing area to accommodate dispenser.

1

/4" (6) to 11/8" (29) max. If panel is thicker, rout out 1/4" (6) min at

A B

subzero.com | 23

CLASSIC REFRIGERATION

H

W

AA

A

H

W

AA

A

B

H

W

H

W

W W

H

W

AA

A

H

W

W W

H

W

AA

A

H

W

H

W

W W

H

W

W W

Overlay Panel Dimensions

W

BI-36R, BI-36F

H

A

H

B

W

BI-36RG

H

AA

BI-30U, BI-36U(ID)

MODEL BI-36R, BI-36RG, BI-36F

REFRIGERATOR / FREEZER W H

Overlay Panel 36" (914) 693/4" (1772) Spacer Panel 351/8" (892) 6815/16" (1751) Backer Panel 353/4" (908) 699/16" (1767)

GRILLE W H

Overlay Panel 36" (914) 91/4" (235)*

1

Spacer Panel 35

/8" (892) 85/16" (211)

Backer Panel 353/4" (908) 815/16" (227)

BI-36RG A B

Stiles / Rails 51/4" (133) 103/8" (264)

MODEL BI-30U, BI-30UG

REFRIGERATOR W H

Overlay Panel 30" (762) 501/8" (1273) Spacer Panel 291/8" (740) 495/16" (1253) Backer Panel 293/4" (756) 4915/16" (1268)

FREEZER W H

Overlay Panel 30" (762) 19" (483) Spacer Panel 291/8" (740) 181/16" (459) Backer Panel 293/4" (756) 1811/16" (475)

GRILLE W H

Overlay Panel 30" (762) 91/4" (235)* Spacer Panel 29 Backer Panel 293/4" (756) 815/16" (227)

BI-30UG A

Stiles / Rails 51/4" (133)

1

/8" (740) 85/16" (211)

H

A

H

A

H

W

BI-30UG, BI-36UG

H

AA

H

W W

H

BI-36UFD(ID), BI-42UFD(ID)

MODEL BI-36U(ID), BI-36UG

REFRIGERATOR W H

Overlay Panel 36" (914) 501/8" (1273) Spacer Panel 351/8" (892) 495/16" (1253) Backer Panel 353/4" (908) 4915/16" (1268)

FREEZER W H

Overlay Panel 36" (914) 19" (483) Spacer Panel 351/8" (892) 181/16" (459) Backer Panel 353/4" (908) 1811/16" (475)

GRILLE W H

Overlay Panel 36" (914) 91/4" (235)* Spacer Panel 351/8" (892) 85/16" (211) Backer Panel 353/4" (908) 815/16" (227)

BI-36UG A

Stiles / Rails 51/4" (133)

MODEL BI-36UFD(ID)

REFRIGERATOR (2 PANELS) W H

Overlay Panel 177/8" (454) 501/8" (1273) Spacer Panel 17" (432) 495/16" (1253) Backer Panel 175/8" (448) 4915/16" (1268)

FREEZER W H

Overlay Panel 36" (914) 19" (483) Spacer Panel 351/8" (892) 181/16" (459) Backer Panel 353/4" (908) 1811/16" (475)

GRILLE W H

Overlay Panel 36" (914) 91/4" (235)* Spacer Panel 35

1

/8" (892) 85/16" (211)

Backer Panel 353/4" (908) 815/16" (227)

H

W

24 | Sub-Zero Customer Care 800.222.7820

CLASSIC REFRIGERATION

H

W

AA

A

H

W

H

W

AA

A

B

H

W

H

WW

B

A

H

W

W W

H

W

AA

A

H

W

AA

A

B

H

W

H

W

W W

Overlay Panel Dimensions

H

A

B

W

BI-36S, BI-42S(ID),

W

WW

BI-42SD, BI-48SD

BI-48S(ID)

MODEL BI-42UFD(ID)

REFRIGERATOR (2 PANELS) W H

Overlay Panel 207/8" (530) 501/8" (1273) Spacer Panel 20" (508) 495/16" (1253) Backer Panel 205/8" (524) 4915/16" (1268)

FREEZER W H

Overlay Panel 42" (1067) 19" (483) Spacer Panel 411/8" (1045) 181/16" (459) Backer Panel 413/4" (1060) 1811/16" (475)

GRILLE W H

Overlay Panel 42" (1067) 91/4" (235)* Spacer Panel 411/8" (1045) 85/16" (211) Backer Panel 413/4" (1060) 815/16" (227)

MODEL BI-36S

REFRIGERATOR W H

Overlay Panel 201/16" (510) 693/4" (1772) Spacer Panel 193/16" (487) 6815/16" (1751) Backer Panel 1913/16" (503) 699/16" (1767)

FREEZER W H

Overlay Panel 1511/16" (398) 693/4" (1772) Spacer Panel 1413/16" (376) 6815/16" (1751) Backer Panel 157/16" (392) 699/16" (1767)

GRILLE W H

Overlay Panel 36" (914) 91/4" (235)*

1

Spacer Panel 35

/8" (892) 85/16" (211)

Backer Panel 353/4" (908) 815/16" (227)

H

MODEL BI-42S, BI-42SID, BI-42SD

REFRIGERATOR W H

Overlay Panel 251/16" (637) 693/4" (1772) Spacer Panel 243/16" (614) 6815/16" (1751)

H

Backer Panel 2413/16" (630) 699/16" (1767)

FREEZER W H

Overlay Panel 1611/16" (424) 693/4" (1772) Spacer Panel 1513/16" (402) 6815/16" (1751) Backer Panel 167/16" (418) 699/16" (1767)

GRILLE W H

Overlay Panel 42" (1067) 91/4" (235)*

1

Spacer Panel 41

/8" (1045) 85/16" (211)

Backer Panel 413/4" (1060) 815/16" (227)

BI-42SD W H

Dispenser Cutout 57/8" (149) 127/16" (316)

A B

Cutout Location 2" (51) 2813/16" (732)

MODEL BI-48S, BI-48SID, BI-48SD

REFRIGERATOR W H

Overlay Panel 283/4" (730) 693/4" (1772) Spacer Panel 277/8" (708) 6815/16" (1751) Backer Panel 281/2" (724) 699/16" (1767)

FREEZER W H

Overlay Panel 19" (483) 693/4" (1772) Spacer Panel 181/8" (460) 6815/16" (1751) Backer Panel 183/4" (476) 699/16" (1767)

GRILLE W H

Overlay Panel 48" (1219) 91/4" (235)* Spacer Panel 47

1

/8" (1197) 85/16" (211)

Backer Panel 473/4" (1213) 815/16" (227)

BI-48SD W H

Dispenser Cutout 57/8" (149) 127/16" (316)

A B

Cutout Location 2" (51) 2813/16" (732)

*Panel height may be increased by refer to Classic panel congurator at subzero.com/trade/panels.

Grille panel dimensions are for standard 84" 83"

(2108) height, subtract 1" (25) from grille panel height dimensions and for

88"

(2235) height, add 4" (102). A specic panel grille must be ordered for an

83" or 88" overall unit height.

7

/16" (11) to hide upper main frame. Also

(2134) overall unit height. For

subzero.com | 25

CLASSIC REFRIGERATION

H

W

AA

B

H

W

AA

A

B

H

W

H

W

W W

H

W

AA

B

H

W

W W

H

W

AA

A

H

W

H

W

W W

H

W

W W

Flush Inset Panel Dimensions

H

AA

BI-30U, BI-36U(ID)

W

BI-36R, BI-36F

H

A

H

B

W

BI-36RG

MODEL BI-36R, BI-36RG, BI-36F

REFRIGERATOR / FREEZER W H

Flush Inset Panel 37" (940) 693/4" (1772) Spacer Panel 351/8" (892) 6815/16" (1751) Backer Panel 353/4" (908) 699/16" (1767)

GRILLE W H

Flush Inset Panel 37" (940) 91/4" (235) Spacer Panel 351/8" (892) 85/16" (211) Backer Panel 353/4" (908) 815/16" (227)

BI-36RG A B

Stiles / Rails 53/4" (146) 103/8" (264)

MODEL BI-30U, BI-30UG

REFRIGERATOR W H

Flush Inset Panel 31" (787) 501/8" (1273) Spacer Panel 291/8" (740) 495/16" (1253) Backer Panel 293/4" (756) 4915/16" (1268)

FREEZER W H

Flush Inset Panel 31" (787) 19" (483) Spacer Panel 291/8" (740) 181/16" (459) Backer Panel 293/4" (756) 1811/16" (475)

GRILLE W H

Flush Inset Panel 31" (787) 91/4" (235) Spacer Panel 291/8" (740) 85/16" (211) Backer Panel 293/4" (756) 815/16" (227)

BI-30UG A B

Stiles / Rails 53/4" (146) 51/4" (133)

H

B

H

B

H

W

BI-30UG, BI-36UG

H

AA

H

W W

H

BI-36UFD(ID), BI-42UFD(ID)

MODEL BI-36U(ID), BI-36UG

REFRIGERATOR W H

Flush Inset Panel 37" (940) 501/8" (1273) Spacer Panel 351/8" (892) 495/16" (1253) Backer Panel 353/4" (908) 4915/16" (1268)

FREEZER W H

Flush Inset Panel 37" (940) 19" (483) Spacer Panel 351/8" (892) 181/16" (459) Backer Panel 353/4" (908) 1811/16" (475)

GRILLE W H

Flush Inset Panel 37" (940) 91/4" (235) Spacer Panel 351/8" (892) 85/16" (211) Backer Panel 353/4" (908) 815/16" (227)

BI-36UG A B

Stiles / Rails 53/4" (146) 51/4" (133)

MODEL BI-36UFD(ID)

REFRIGERATOR (2 PANELS) W H

Flush Inset Panel 183/8" (467) 501/8" (1273) Spacer Panel 17" (432) 495/16" (1253) Backer Panel 175/8" (448) 4915/16" (1268)

FREEZER W H

Flush Inset Panel 37" (940) 19" (483) Spacer Panel 351/8" (892) 181/16" (459) Backer Panel 353/4" (908) 1811/16" (475)

GRILLE W H

Flush Inset Panel 37" (940) 91/4" (235) Spacer Panel 351/8" (892) 85/16" (211) Backer Panel 353/4" (908) 815/16" (227)

H

W

26 | Sub-Zero Customer Care 800.222.7820

CLASSIC REFRIGERATION

H

W

AA

A

H

W

H

W

AA

A

B

H

W

H

WW

B

A

H

W

W W

H

W

AA

A

H

W

AA

A

B

H

W

H

W

W W

Flush Inset Panel Dimensions

H

A

B

W

BI-36S, BI-42S(ID),

W

WW

BI-42SD, BI-48SD

BI-48S(ID)

MODEL BI-42UFD(ID)

REFRIGERATOR (2 PANELS) W H

Flush Inset Panel 213/8" (543) 501/8" (1273) Spacer Panel 20" (508) 495/16" (1253) Backer Panel 205/8" (524) 4915/16" (1268)

FREEZER W H

Flush Inset Panel 43" (1092) 19" (483) Spacer Panel 411/8" (1045) 181/16" (459) Backer Panel 413/4" (1060) 1811/16" (475)

GRILLE W H

Flush Inset Panel 43" (1092) 91/4" (235) Spacer Panel 411/8" (1045) 85/16" (211) Backer Panel 413/4" (1060) 815/16" (227)

MODEL BI-36S

REFRIGERATOR W H

Flush Inset Panel 209/16" (522) 693/4" (1772) Spacer Panel 193/16" (487) 6815/16" (1751) Backer Panel 1913/16" (503) 699/16" (1767)

FREEZER W H

Flush Inset Panel 163/16" (411) 693/4" (1772) Spacer Panel 1413/16" (376) 6815/16" (1751) Backer Panel 157/16" (392) 699/16" (1767)

GRILLE W H

Flush Inset Panel 37" (940) 91/4" (235) Spacer Panel 351/8" (892) 85/16" (211) Backer Panel 353/4" (908) 815/16" (227)

H

MODEL BI-42S, BI-42SID, BI-42SD

REFRIGERATOR W H

Flush Inset Panel 259/16" (649) 693/4" (1772) Spacer Panel 243/16" (614) 6815/16" (1751)

H

Backer Panel 2413/16" (630) 699/16" (1767)

FREEZER W H

Flush Inset Panel 173/16" (437) 693/4" (1772) Spacer Panel 1513/16" (402) 6815/16" (1751) Backer Panel 167/16" (418) 699/16" (1767)

GRILLE W H

Flush Inset Panel 43" (1092) 91/4" (235) Spacer Panel 411/8" (1045) 85/16" (211) Backer Panel 413/4" (1060) 815/16" (227)

BI-42SD W H

Dispenser Cutout 57/8" (149) 127/16" (316)

A B

Cutout Location 2" (51) 2813/16" (732)

MODEL BI-48S, BI-48SID, BI-48SD

REFRIGERATOR W H

Flush Inset Panel 291/4" (743) 693/4" (1772) Spacer Panel 277/8" (708) 6815/16" (1751) Backer Panel 281/2" (724) 699/16" (1767)

FREEZER W H

Flush Inset Panel 191/2" (495) 693/4" (1772) Spacer Panel 181/8" (460) 6815/16" (1751) Backer Panel 183/4" (476) 699/16" (1767)

Flush Inset Panel 49" (1245) 91/4" (235)

GRILLE W H

Spacer Panel 471/8" (1197) 85/16" (211) Backer Panel 473/4" (1213) 815/16" (227)

BI-48SD W H

Dispenser Cutout 57/8" (149) 127/16" (316)

A B

Cutout Location 2" (51) 2813/16" (732)

Grille panel dimensions are for standard 84" 83"

(2108) height, subtract 1" (25) from grille panel height dimensions and for

88"

(2235) height, add 4" (102). A specic panel grille must be ordered for an

83" or 88" overall unit height.

(2134) overall unit height. For

subzero.com | 27

CLASSIC REFRIGERATION

1

/4" (6)

REVEAL

5

/16" (8)

1

/8" (3)

DOOR DOOR

TOP VIEW

5

/8"

(16)

5

/16"

(8)

1

/2"

(13)

1

/2"(13)

3

/32"

(2)

5

/16"

(8)

5

/16"

(8)

5

/32"

(4)

GRILLE

DOOR

1

/4" (6)

REVEAL

5

/16" (8)

1

/8" (3)

FLUSH INSET PANEL

SPACER

BACKER

DOOR DOOR

DOOR / DRAWER / GRILLE

TOP VIEWTOP VIEW

SIDE VIEW

CABINETRY

1

/4" (6)

REVEAL

5

/16" (8)

1

/8" (3)

DOOR DOOR

TOP VIEWTOP VIEW

5

/8"

(16)

5

/16" (8)

1

/2"

(13)

5

/16"

(8)

3

/32" (4) DOOR

5

/32" (2) DRAWER

DOOR /

DRAWER

1

/2"(13)

3

/32"

(2)

5

/16"

(8)

5

/16"

(8)

5

/32"

(4)

GRILLE

DOOR

1

/4" (6)

REVEAL

5

/16" (8)

1

/8" (3)

FLUSH INSET PANEL

SPACER

BACKER

DOOR DOOR

DOOR / DRAWER / GRILLE

1

/2"(13)

5

/16"

(8)

1

/8"

(3)

CABINETRY

GRILLE

TOP VIEWTOP VIEW

SIDE VIEW SIDE VIEW

SIDE VIEW

CABINETRY

1

/2"(13)

3

/32"

(2)

5

/16"

(8)

5

/16"

(8)

5

/32"

(4)

GRILLE

DOOR

1

/4" (6)

REVEAL

1

/8" (3)

DOOR DOOR

TOP VIEWTOP VIEW

Flush Inset Panels

PANEL OFFSET

The illustrations provide panel offsets and reveals for Classic models in a ush inset application. Refer to the chart below for reference to the illustrations.

PANEL OFFSET

ALL REFRIGERATOR / ALL FREEZER ILLUS

Door / Grille Sides A Grille Top C Grille Bottom / Door Top D Door Bottom F

OVER-AND-UNDER ILLUS

Door (hinge) / Drawer / Grille Sides A Doors (handle) Sides (French door only) B Grille Top C Grille Bottom / Door Top D Door Bottom / Drawer Top E Drawer Bottom F

SIDE-BY-SIDE ILLUS

Doors (hinge) / Grille Sides A Doors (handle) Sides B Grille Top C Grille Bottom / Door Top D Door Bottom F

5

/16"

TOP VIEW

DOOR / DRAWER / GRILLE

BACKER

SPACER

FLUSH INSET PANEL

Illus. A

CABINETRY

GRILLE

Illus. C

DOOR

DRAWER

TOP VIEW

CABINETRY

DOOR DOOR

(8)

5

/8"

(16)

5

/16"

(8)

SIDE VIEW

5

/16"

(8)

5

/16"

(8)

SIDE VIEW

1

/2"

(13)

1

/2"(13)

1

/8"

(3)

3

/32"

(2)

5

/8"(16)

5

/32"

(4)

5

/16" (8)

1

Illus. B

GRILLE

DOOR

Illus. D

DOOR /

DRAWER

SIDE VIEW

/8" (3)

1

/4" (6)

REVEAL

5

/16"

5

(8)

/32"

(4)

1

/2"(13)

3

/32"

5

(2)

/16"

(8)

SIDE VIEW

5

/16"

(8)

3

/32" (4) DOOR

5

/32" (2) DRAWER

28 | Sub-Zero Customer Care 800.222.7820

Illus. E

Illus. F

CLASSIC REFRIGERATION

Dual Installation

If two units are installed side by side, a dual installation kit may be required. Installations without a custom ller strip require a dual installation kit. If a dual installation kit is not specied, a 2"

(51) ller strip is recommended between

the units. A custom ller strip is required when installing two French door or side-by-side models. Dual installations without a ller strip can only be accomplished using two 84"

(2134)

units with opposite hinges. Refer to the illustrations

below.

Dual installation kits are available through an authorized Sub-Zero dealer. For local dealer information, visit the nd a showroom section of our website, subzero.com. For questions regarding the installation, call Sub-Zero Customer Care at 800-222-7820.

For dual standard installations, panel dimensions are the same as for single installations. Refer to the charts on pages 22–25. Panel dimensions and offsets for dual ush inset installations are listed on the following pages.

WITHOUT FILLER STRIP

Opposite hinges

FILLER STRIP

Same side hinges

subzero.com | 29

CLASSIC REFRIGERATION

H

W

AA

B

H

W

AA

A

B

H

W

H

W

W W

H

W

AA

B

H

W

W W

H

W

AA

A

H

W

H

W

W W

H

W

W W

Dual Flush Inset Panel Dimensions

H

AA

W

BI-36R, BI-36F

H

A

H

B

W

BI-36RG

MODEL BI-36R, BI-36RG, BI-36F

REFRIGERATOR / FREEZER W H

Flush Inset Panel 361/2" (927) 693/4" (1772) Spacer Panel 351/8" (892) 6815/16" (1751) Backer Panel 353/4" (908) 699/16" (1767)

GRILLE W H

Flush Inset Panel 361/2" (927) 91/4" (235) Spacer Panel 351/8" (892) 85/16" (211) Backer Panel 353/4" (908) 815/16" (227)

BI-36RG A B

Stiles / Rails 53/4" (146) 103/8" (264)

MODEL BI-30U, BI-30UG

REFRIGERATOR W H

Flush Inset Panel 301/2" (775) 501/8" (1273) Spacer Panel 291/8" (740) 495/16" (1253) Backer Panel 293/4" (756) 4915/16" (1268)

FREEZER W H

Flush Inset Panel 301/2" (775) 19" (483) Spacer Panel 291/8" (740) 181/16" (459) Backer Panel 293/4" (756) 1811/16" (475)

GRILLE W H

Flush Inset Panel 301/2" (775) 91/4" (235) Spacer Panel 291/8" (740) 85/16" (211) Backer Panel 293/4" (756) 815/16" (227)

BI-30UG A B

Stiles / Rails 53/4" (146) 51/4" (133)

H

W

BI-30U, BI-36U(ID)

B

W

BI-30UG, BI-36UG

H

AA

H

MODEL BI-36U(ID), BI-36UG

REFRIGERATOR W H

Flush Inset Panel 361/2" (927) 501/8" (1273) Spacer Panel 351/8" (892) 495/16" (1253) Backer Panel 353/4" (908) 4915/16" (1268)

FREEZER W H

Flush Inset Panel 361/2" (927) 19" (483) Spacer Panel 351/8" (892) 181/16" (459) Backer Panel 353/4" (908) 1811/16" (475)

GRILLE W H

Flush Inset Panel 361/2" (927) 91/4" (235) Spacer Panel 351/8" (892) 85/16" (211) Backer Panel 353/4" (908) 815/16" (227)

BI-36UG A B

Stiles / Rails 53/4" (146) 51/4" (133)

Grille panel dimensions are for standard 84"

(2134) overall unit height.

30 | Sub-Zero Customer Care 800.222.7820

CLASSIC REFRIGERATION

1

/4" (6)

REVEAL

5

/16" (8)

1

/8" (3)

DOOR DOOR

TOP VIEW

5

/8"

(16)

5

/16"

(8)

1

/2"

(13)

1

/2"(13)

3

/32"

(2)

5

/16"

(8)

5

/16"

(8)

5

/32"

(4)

GRILLE

DOOR

1

/4" (6)

REVEAL

5

/16" (8)

1

/8" (3)

FLUSH INSET PANEL

SPACER

BACKER

DOOR DOOR

DOOR / DRAWER / GRILLE

TOP VIEWTOP VIEW

SIDE VIEW

CABINETRY

1

/4" (6)

REVEAL

5

/16" (8)

1

/8" (3)

DOOR DOOR

TOP VIEWTOP VIEW

5

/8"

(16)

5

/16" (8)

1

/2"

(13)

5

/16"

(8)

3

/32" (4) DOOR

5

/32" (2) DRAWER

DOOR /

DRAWER

1

/2"(13)

3

/32"

(2)

5

/16"

(8)

5

/16"

(8)

5

/32"

(4)

GRILLE

DOOR

1

/4" (6)

REVEAL

5

/16" (8)

1

/8" (3)

FLUSH INSET PANEL

SPACER

BACKER

DOOR DOOR

DOOR / DRAWER / GRILLE

1

/2"(13)

5

/16"

(8)

1

/8"

(3)

CABINETRY

GRILLE

TOP VIEWTOP VIEW

SIDE VIEW SIDE VIEW

SIDE VIEW

CABINETRY

1

/2"(13)

3

/32"

(2)

5

/16"

(8)

5

/16"

(8)

5

/32"

(4)

GRILLE

DOOR

1

/4" (6)

REVEAL

1

/8" (3)

DOOR DOOR

TOP VIEWTOP VIEW

Dual Installation

DUAL FLUSH INSET PANEL OFFSET

The illustrations provide panel offsets and reveals for Classic models in a dual ush inset application. Refer to the chart below for reference to the illustrations.

PANEL OFFSET

ALL REFRIGERATOR / ALL FREEZER ILLUS

Door (hinge) / Grille Sides A Door (handle) Sides B Grille Top C Grille Bottom / Door Top D Door Bottom F

OVER-AND-UNDER ILLUS

Door (hinge) / Drawer / Grille Sides A Door (handle) Sides B Grille Top C Grille Bottom / Door Top D Door Bottom / Drawer Top E Drawer Bottom F

5

/16"

TOP VIEW

DOOR / DRAWER / GRILLE

BACKER

SPACER

FLUSH INSET PANEL

Illus. A

CABINETRY

GRILLE

Illus. C

DOOR

DRAWER

TOP VIEW

DUAL TRIM

CABINETRY

DOOR DOOR

(8)

5

/8"

(16)

5

/16"

(8)

SIDE VIEW

5

/16"

(8)

5

/16"

(8)

SIDE VIEW

1

/2"

(13)

1

/2"(13)

1

/8"

(3)

3

/32"

(2)

5

/8"(16)

5

/32"

(4)

5

/16" (8)

1

Illus. B

GRILLE

DOOR

Illus. D

DOOR /

DRAWER

SIDE VIEW

/8" (3)

1

/4" (6)

REVEAL

5

/16"

5

(8)

/32"

(4)

1

/2"(13)

3

/32"

5

(2)

/16"

(8)

SIDE VIEW

5

/16"

(8)

3

/32" (4) DOOR

5

/32" (2) DRAWER

Illus. E

Illus. F

subzero.com | 31

CLASSIC REFRIGERATION

Dual Installation

DUAL WIDE GRILLE

A dual wide grille spans the entire width of both units in a dual installation and is a part of a dual installation kit.

For overlay and ush inset panel dimensions for the dual wide grille, refer to the charts below. Dimensions listed are for a standard 84"

DUAL WIDE GRILLE—OVERLAY

TWO 30" MODELS W H

Overlay Panel 601/4" (1530) 91/4" (235) Spacer Panel 593/8" (1508) 8 Backer Panel 60" (1524) 815/16" (227)

30" AND 36" MODEL W H

Overlay Panel 661/4" (1683) 91/4" (235) Spacer Panel 653/8" (1661) 85/16" (211) Backer Panel 66" (1676) 815/16" (227)

TWO 36" MODELS W H

Overlay Panel 721/4" (1835) 91/4" (235) Spacer Panel 713/8" (1813) 85/16" (211) Backer Panel 72" (1829) 815/16" (227)

(2134) nished height.

5

/16" (211)

DUAL WIDE GRILLE—FLUSH INSET

TWO 30" MODELS W H

Flush Inset Panel 611/4" (1556) 91/4" (235) Spacer Panel 593/8" (1508) 85/16" (211) Backer Panel 60" (1524) 815/16" (227)

30" AND 36" MODEL W H

Flush Inset Panel 671/4" (1708) 91/4" (235) Spacer Panel 653/8" (1661) 85/16" (211) Backer Panel 66" (1676) 815/16" (227)

TWO 36" MODELS W H

Flush Inset Panel 731/4" (1861) 91/4" (235) Spacer Panel 713/8" (1813) 85/16" (211) Backer Panel 72" (1829) 815/16" (227)

32 | Sub-Zero Customer Care 800.222.7820

84"

(2134)

24" (610)

ROUT TO

3

/16" (5)

(OVER-AND-UNDER

MODELS)

OPTIONAL

TOE KICK CUT-OUT

4" (102)

201/2"

(521)

53/4"

(146)

17/8"(48)

1"

(25)

41/4" (108)

ROUT TO

1

/8" (3)

FRONT

OF SIDE

PANEL

25/8"

(67)

MAIN

FRAME

SIDE PANEL

ROUTING

1" (25)

17/8" (48)

1

/8" (3)

1

/2"

(13)

CLASSIC REFRIGERATION

Side Panel

The custom side panels must be a minimum of 24" (610) deep and side panel to t ush against the side of the unit. Refer to the illustrations below.

When installing a Classic unit with a custom side panel, an accessory kit is required. Stainless steel and white enamel side panels are available for an 84" through an authorized Sub-Zero dealer. For local dealer information, visit the nd a showroom section of our website, subzero.com.

1

/2" (13) thick. Routing will be necessary for the

(2134) nished height

Standard Handles

Optional stainless steel tubular and pro handles are available through an authorized Sub-Zero dealer. For local dealer information, visit the nd a showroom section of our website, subzero.com.

Refer to the chart below for standard handle lengths for Classic models.

HANDLE LENGTH

Full Door 637/8" (1622) 453/16" (1147)

Over-and-Under Door 441/4" (1124) 371/2" (952)

30" Drawer 245/16" (633) 179/16" (447)

36" Drawer 305/16" (770) 235/8" (600)

42" Drawer 365/16" (922) 295/8" (753)

TUBULAR PRO

Side panel dimensions

Routing detail

subzero.com | 33

CLASSIC REFRIGERATION

Framed Panels

FULL-SCALE TEMPLATE

OPTIONAL EXTENDED FULL-LENGTH HANDLE

1"

(25)

1

/4" (6) FRAMED PANEL

STANDARD FULL-LENGTH HANDLE

2"

(51)

DOOR

3"

(76)

11/4" (32) PANEL

1" (25) PANEL

3

/4" (19) PANEL

1

/2" (13) PANEL

Framed panel thickness

34 | Sub-Zero Customer Care 800.222.7820

CLASSIC REFRIGERATION

Overlay | Flush Inset Panels

FULL-SCALE TEMPLATE

Overlay and ush inset panels must be a minimum of 5/8"

(16)

thick to support mounting the handle. Panel thickness does not include the backer and spacer panels. Mount the handle close to the opening edge of the door.

1"

(25)

1

/4" (6) BACKER PANEL

DOOR

DEPTH OF TUBULAR AND PRO HANDLES

2"

(51)

3"

(76)

11/4" (32) PANEL

1" (25) PANEL

3

/4" (19) PANEL

.10" (3) SPACER PANEL

Overlay and ush inset panel thickness

subzero.com | 35

CLASSIC REFRIGERATION

237/8"

(606)

TO REAR OF UNIT

OVERALL WIDTH OF UNIT

1

/

4

"

(32)

1

/

2

"

(38)

1

3

/

4

"

(44)

0"

(0)

1"

(25)

2"

(51)

2

1

/

4

"

(57)

2

1

/

2

"

(63)

2

3

/

4

"

(70)

3"

(76)

3

1

/

4

"

(83)

3

1

/

2

"

(89)

1

/

4

"

(6)

1

/

2

"

(13)

3

/

4

"

(19)

3

/4"

(19) THICK

OVERLAY PANEL

(TYPICAL)

1

/4"

(6) BACKER

PANEL

1"

(25) THICK

PANEL

Overlay Application

FULL-SCALE TEMPLATE

90° door opening (top view)

36 | Sub-Zero Customer Care 800.222.7820

1" (25)0"

SCALE

CLASSIC REFRIGERATION

Flush Inset Application

24"

(610)

FULL-SCALE TEMPLATE

For panels thicker than 3/4" (19), a 90° door stop may be required to prevent interference with adjacent cabinets.

TO BACK WALL

23/16"

(56)

ASSUMES

3

/4" (19)

FLUSH INSET

PANEL

THICKNESS

11/4" (32)

1" (25) THICK

PANEL

3

/4" (19) THICK

FLUSH INSET PANEL

(TYPICAL)

1

/4" (6) BACKER

PANEL

110° door opening (top view)

1" (25)0"

SCALE

subzero.com | 37

CLASSIC REFRIGERATION

FILLER STRIP

11/4" (32)

APPROX PROFILE OF

STAINLESS STEEL WRAPPED

DOOR AND HANDLE

Dual Standard Installation

FULL-SCALE TEMPLATE

Typical framed, overlay, or stainless steel dual installation with ller strip at maximum 110° door opening. Panel thickness may require a 90° door stop.

DOOR

CLOSED

DOOR

OPEN 110°

1" (25)0"

SCALE

Dual standard installation (top view)

38 | Sub-Zero Customer Care 800.222.7820

CLASSIC REFRIGERATION

FILLER STRIP

11/2" (38)

1

/2" (13)

PROFILE OF

3

(19) FLUSH INSET PANEL

/4"

AND TUBULAR HANDLE

Dual Flush Inset Installation

FULL-SCALE TEMPLATE

Typical ush inset dual installation with ller strip at maximum 110° door opening. Panel thickness may require a 90° door stop.

DOOR

CLOSED

DOOR

OPEN 110°

1" (25)0"

SCALE

Dual ush inset installation (top view)

subzero.com | 39

PRO REFRIGERATION

40 | Sub-Zero Customer Care 800.222.7820

PRO REFRIGERATION

PRO Refrigeration

Freshness nds unmistakable expression with Sub-Zero PRO Refrigeration. A monument to food preservation— equal parts sculpted metal design statement and culinary secret weapon. Its vast interior, like its bold exterior, is crafted of stainless steel. Available in 36" and 48" widths, with a glass or solid door, and may be either built in or freestanding.

PRO MODELS

PRO3650

PRO3650G

PRO4850

PRO4850G

subzero.com | 41

PRO REFRIGERATION

Overall Dimensions

36" MODEL

HEIGHT DIMENSIONS ±

237/8"

(606)

36" (914)

1

/2" (13)

421/8"

(1070)

301/2"

(775)

(2134)

26"

(660)

257/8" (657)

84"

4" (102)

303/16" (767)

26"

(660)

23/8" (60)

Model PRO3650 / PRO3650G

42 | Sub-Zero Customer Care 800.222.7820

373/8"

(949)

SPECIFICATIONS

INTERIOR CAPACITY R CU FT (L) F CU FT (L)

PRO3650 18.4 (521) 4.3 (122) PRO3650G 18.4 (521) 4.3 (122)

SHIPPING WEIGHT LB

(KG)

PRO3650 630 (286) PRO3650G 650 (295)

PRO REFRIGERATION

Overall Dimensions

48" MODEL

237/8"

(606)

26"

(660)

48" (1219)

HEIGHT DIMENSIONS ±

1

/2" (13)

421/8"

(1070)

301/2"

(775)

(533)

21"

84"

(2134)

4" (102)

237/8"

(606)

303/4"

(781)

257/8" (657)

303/16" (767)

141/2"

(368)

Model PRO4850 / PRO4850G

23/8" (60)

SPECIFICATIONS

INTERIOR CAPACITY R CU FT (L) F CU FT (L)

PRO4850 18.7 (530) 11.7 (331) PRO4850G 18.7 (530) 11.7 (331)

SHIPPING WEIGHT LB

(KG)

PRO4850 860 (390) PRO4850G 880 (399)

subzero.com | 43

NOTE:

SIDE

PRO REFRIGERATION

Opening Dimensions

STANDARD | FLUSH INSTALLATION

H

OPENING

HEIGHT

D

OPENING

DEPTH

TOP VIEW

W

OPENING WIDTH

31/2" (89)

FINISHED

RETURN

W

31/2" (89)

FINISHED

RETURN

W

FRAMELESS

CABINETRY

FRAMED

CABINETRY

3

/4" (19)

TYPICAL

3

/4" (19)

TYPICAL

FILLER

VIEW

31/2" (89) finished returns will be visible and should be finished to match cabinetry.

STANDARD OPENING W

FRONT VIEW

H D

36" Model 351/2" (902) 833/4" (2127) 24" (610)

48" Model 471/2" (1206) 833/4" (2127) 24" (610)

For standard installations, the face frame will extend 2" (51) beyond cabinetry.

44 | Sub-Zero Customer Care 800.222.7820

FLUSH OPENING

W H D

36" Model 36" (914) 841/8" (2137) 26" (660)

48" Model 48" (1219) 841/8" (2137) 26" (660)

For ush installations, the face frame will be ush with surrounding cabinetry.

NOTE:

SIDE

PRO REFRIGERATION

Opening Dimensions

DUAL STANDARD | FLUSH INSTALLATION

H

OPENING

HEIGHT

D

OPENING

DEPTH

TOP VIEW

W

OPENING WIDTH

31/2" (89)

FINISHED

RETURN

W

31/2" (89)

FINISHED

RETURN

W

FRAMELESS

CABINETRY

FRAMED

CABINETRY

3

/4" (19)

TYPICAL

3

/4" (19)

TYPICAL

FILLER

VIEW

31/2" (89) finished returns will be visible and should be finished to match cabinetry.

DUAL STANDARD OPENING W

H D

FRONT VIEW

Two 36" Models 711/2" (1816) 833/4" (2127) 24" (610)

For standard installations, the face frame will extend 2" (51) beyond cabinetry. A dual installation kit is required for this installation.

DUAL FLUSH OPENING

W H D

Two 36" Models 72" (1829) 841/8" (2137) 26" (660)

For ush installations, the face frame will be ush with surrounding cabinetry. A dual installation kit is required for this installation.

subzero.com | 45

PRO REFRIGERATION

Dual Installation

If two units are installed side by side, a dual installation kit may be required. Installations without a custom ller strip require a dual installation kit. If a dual installation kit is not specied, a 2" units. Dual installations without a ller strip can only be accomplished using two units with opposite hinges. Refer to the illustrations below.

Dual installation kits are available through an authorized Sub-Zero dealer. For local dealer information, visit the nd a showroom section of our website, subzero.com. For questions regarding the installation, call Sub-Zero Customer Care at 800-222-7820.

(51) ller strip is recommended between the

Electrical Requirements

Installation must comply with all applicable electrical codes.

Locate the electrical supply within the shaded area shown in the illustration below. A separate circuit servicing only this appliance is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation.

ELECTRICAL REQUIREMENTS

Electrical Supply 115 VAC, 60 Hz

Service 15 amp dedicated circuit

Receptacle 3-prong grounding-type

7"

E

(178)

6"

(152)

751/2" (1918)

FROM FLOOR

WITHOUT FILLER STRIP

Opposite hinges

FILLER STRIP

Same side hinges

RIGHT SIDE

OF OPENING

Electrical supply location

46 | Sub-Zero Customer Care 800.222.7820

PRO REFRIGERATION

Plumbing Requirements

Installation must comply with all applicable plumbing codes.

Locate the water supply line within the shaded area shown in the illustration below. Connect the water supply line to the house supply with an easily accessible shut-off valve. Do not use self-piercing valves. The water supply line must not interfere with the installation of the anti-tip bracket.

A reverse osmosis system can be used provided there is constant water pressure of 35–120 psi to the unit at all times. In this application, the water ltration system must be bypassed by removing the lter. A copper line is not recommended for this application.

PLUMBING REQUIREMENTS

Water Supply

Pressure 35–120 psi

Excess Line for Connection 36" (914)

(2.4–8.3 bar) supplied

1

/4" OD copper, braided

stainless steel, or PEX tubing

(2.4–8.3 bar)

Standard Handles

Optional stainless steel pro handles are avail able through an authorized Sub-Zero dealer. For local dealer information, visit the nd a showroom section of our website, subzero.com.

Refer to the chart below for standard handle lengths for PRO models.

HANDLE LENGTH

Door 2711/16" (703) 2711/16" (703)

Refrigerator Drawer 263/16" (665) 1915/16" (506)

Freezer Drawer 263/16" (665) 119/16" (294)

36" MODEL 48" MODEL

RIGHT SIDE

OF OPENING

6"

(152)

3" (76)

AREA EXTENDS

FORWARD ON FLOOR

Water supply location

53/16"

(132)

1

/2" (13)

subzero.com | 47

DESIGNER REFRIGERATION

48 | Sub-Zero Customer Care 800.222.7820

DESIGNER REFRIGERATION

Designer Refrigeration

With custom front panels and hardware, Sub-Zero Designer columns, tall, and drawer models disappear into the decor. Designer units t ush with cabinetry, making Designer refrigeration as practical and beautiful in the master suite, bar, or theatre room as in the kitchen. Model ID-24RO, approved for outdoor installations, is ideal for any outdoor kitchen.

COLUMN MODELS

IC-18FI

IC-24C(I)

TALL MODELS

IT-30R(ID)

IT-30FI

IT-30CI(ID)

DRAWER MODELS

IC-24R

IC-24FI

IT-36R(ID)

IT-36CI(ID)

IC-30R(ID)

IC-30FI

IC-36R(ID)

IC-36FI

ID-24R

ID-24F(I)

ID-24RO

ID-27R

ID-30R(P)

ID-30F(I)

ID-30C(I)

ID-36R(P)

ID-36C(I)

subzero.com | 49

DESIGNER REFRIGERATION

691/2"

(1765)

W 24" (610)

84"*

(2134)

41/2" (114)

35/8" (92)

*831/2" (2121) MIN TO 841/2" (2146) MAX

A

B

13/4" (45)

Specications

INTERIOR CAPACITY—CU FT (L)

COLUMN REFR FRZR

IC-18FI 8.4 (238) IC-24R 12.9 (365) IC-24FI 12.3 (348) IC-24C(I) 8.0 (227) 3.1 (88) IC-30R(ID) 17.3 (490) IC-30FI 15.3 (433) IC-36R(ID) 21.4 (606) IC-36FI 20.0 (566)

TALL REFR FRZR

IT-30R(ID) 16.5 (467) IT-30FI 15.1 (428) IT-30CI(ID) 10.6 (300) 5.0 (142) IT-36R(ID) 20.5 (580) IT-36CI(ID) 13.3 (377) 6.4 (181)

DRAWER REFR FRZR

ID-24R 4.0 (113) ID-24F(I) 3.8 (108) ID-24RO 4.0 (113) ID-27R 4.6 (130) ID-30R(P) 5.2 (147) ID-30F(I) 4.9 (139) ID-30C(I) 3.0 (85) 2.0 (57) ID-36R(P) 6.6 (187) ID-36C(I) 3.4 (96) 2.5 (71)

Overall Dimensions

COLUMN

SHIPPING WEIGHT

COLUMN LB (KG)

18" Column 260 (118) 24" Column 340 (154) 30" Column 400 (181) 36" Column 440 (200)

TALL LB

30" Tall 400 (181) 36" Tall 460 (209)

DRAWER LB

24" Drawer 170 (77) 27" Drawer 190 (86) 30" Drawer 210 (95) 36" Drawer 250 (113)

IMPORTANT NOTE: Overall dimensions do not include panels

or handles. Dimensions will vary with panel thickness.

(KG)

COLUMN

18" Column 18" (457) 21/2" (64) 161/2" (419)

24" Column 24" (610) 4" (102) 221/2" (572)

W A B

30" Column 30" (762) 55/8" (143) 281/2" (724)

36" Column 36" (914) 71/4" (184) 341/2" (876)

50 | Sub-Zero Customer Care 800.222.7820

DESIGNER REFRIGERATION

173/4"

(451)

W 24" (610)

84"*

(2134)

109/16"

(268)

447/8"

(1140)

135/16"

(338)

3

/8" (10)

41/2" (114)

35/8" (92)

*831/2" (2121) MIN TO 841/2" (2146) MAX

3

/8"

(10)

A

B

13/4" (45)

34

Overall Dimensions

TALL DRAWER

1

/2"*

(876)

173/4"

(451)

(864) MIN TO

*34"

W

35"

(889) MAX

135/16"

(338)

109/16"

(268)

1

/4" (6)

3

/8" (10)

(610)

24"

35/8" (92)

TALL

30" Tall 30" (762) 55/8" (143) 281/2" (724)

36" Tall 36" (914) 71/4" (184) 341/2" (876)

W A B

DRAWER

24" Drawer 24" (610)

27" Drawer 27" (686)

30" Drawer 30" (762)

36" Drawer 36" (914)

subzero.com | 51

W

DESIGNER REFRIGERATION

NOTE:

SIDE

Opening Dimensions

DESIGNER

25" (635)

OPENING

DEPTH

253/4" (654)

FOR OUTDOOR

MODEL

TOP VIEW

OPENING DIMENSIONS

COLUMN / TALL W* H

18" Column 18" (457) 84" (2134) 24" Column 24" (610) 84" (2134) 30" Column / Tall 30" (762) 84" (2134) 36" Column / Tall 36" (914) 84" (2134)

DRAWER W* H

24" Drawer 24" (610) 341/2" (876) 27" Drawer 27" (686) 341/2" (876) 30" Drawer 30" (762) 341/2" (876) 36" Drawer 36" (914) 341/2" (876)

*For stainless steel side panel accessory, add 1" (25) per panel to opening width.

H

OPENING

HEIGHT

VIEW

31/2" (89) finished returns will be visible and should be finished to match cabinetry—

41/2" (114) for outdoor model.

3

/4" (19)

31/2" (89)

FINISHED

RETURN

TYPICAL

31/2" (89)

FINISHED

RETURN

W

OPENING WIDTH

FRONT VIEW

3

/4" (19)

TYPICAL

FILLER

The depth of each Designer model is 24" (610). Allow for panel thickness when planning the nished opening depth.

1

A minimum 3 of the opening—4

/2" (89) nished return is required on all sides

1

/2" (114) for the outdoor model. Framed cabinets require additional nished ller material behind the face frame for a proper installation. Refer to the illustration.

DUAL INSTALLATION

When installing two units side by side in a dual installation, the opening width is the width of the two units added together. A dual installation kit is required for this installation. If a dual installation kit is not specied, a minimum

(51) ller strip is required between the units.

2"

Dual installation kits are available through an authorized Sub-Zero dealer. For local dealer information, visit the nd a showroom section of our website, subzero.com. For questions regarding the installation, call Sub-Zero Customer Care at 800-222-7820.

PRESS-TO-OPEN INSTALLATION

Column Models Only: For information regarding a press-to-

open (handleless) design, refer to the guides section of any Designer column or Designer wine column product page of our website, subzero.com.

W

FRAMELESS CABINETRY

W

52 | Sub-Zero Customer Care 800.222.7820

FRAMED

CABINETRY

IMPORTANT NOTE: A press-to-open installation is not Star-K

certied.

DESIGNER REFRIGERATION

Electrical Requirements

Locate the electrical supply within the shaded area shown in the illustration and chart below. A separate circuit servicing only this appliance is required.

IMPORTANT NOTE: For outdoor model ID-24RO, a ground

fault circuit interrupter (GFCI) is required to reduce the risk of electrical shock. A GFCI is not recommended for use with indoor models and may cause interruption of operation.

The electrical outlet must be positioned with the grounding prong to the right of the thinner blades.

Installation must comply with all applicable electrical codes.

ELECTRICAL REQUIREMENTS

Electrical Supply 115 VAC, 60 Hz

Service 15 amp dedicated circuit

Receptacle 3-prong grounding-type

ELECTRICAL SUPPLY LOCATION

18" Model 6" (152)

24" Model 91/2" (241)

27" Model 11" (279)

30" Model 121/2" (318)

36" Model 151/2" (394)

A

Plumbing Requirements

Locate the water supply line within the shaded area shown in the illustration below. Connect the water supply line to the house supply with an easily accessible shut-off valve. Do not use self-piercing valves. The water supply line must not interfere with installation of the anti-tip bracket.

A reverse osmosis system can be used provided there is constant water pressure of 35–120 psi to the unit at all times. A copper line is not recommended for this application.

Installation must comply with all applicable plumbing codes.

PLUMBING REQUIREMENTS

Water Supply

Pressure 35–120 psi (2.4–8.3 bar)

Excess Line for Connection 36" (914)

WATER SUPPLY LOCATION

18" Model 3" (76)

24" Model 51/2" (140)

30" Model 6" (152)

36" Model 9" (229)

1

/4" OD copper, braided stainless

(2.4–8.3 bar) supplied

steel, or PEX tubing

A

LEFT SIDE

OF OPENING

41/2"

(114)

1

/4" (6)1/4" (6)

A

FLOOR

Electrical supply location

41/4"

(108)

RIGHT SIDE

OF OPENING

6" (152)

A

3" (76)

1

AREA EXTENDS

FORWARD ON FLOOR

/2" (13)

Water supply location

subzero.com | 53

DESIGNER REFRIGERATION

Stainless Steel Panels

The outdoor model requires the use of Sub-Zero stainless steel outdoor accessory panels. Stainless steel panels are available through an authorized Sub-Zero dealer. For local dealer information, visit the nd a showroom section of our website, subzero.com.

3

The thickness of indoor stainless steel panels is

1

outdoor stainless steel panels are 1 each Designer model is 24"

(610). Allow for panel thickness

/2" (38). The depth of

when planning the nished opening depth.

1

Reveals of

/8" (3) are typical, however, the reveal between the upper and lower outdoor stainless steel panel is to accommodate the lock.

/4" (19) and

1

/4" (6)

Custom Panels

For Designer models, custom door panels and handle hardware must be provided. Refer to the Panel Requirements chart and Typical Panel Dimensions.

The thickness of the custom panel can vary. A minimum

5

/8" (16) thick panel is required, but the thickness can be increased provided it does not exceed the weight limit. The depth of each Designer model is 24" thickness when planning the nished opening depth. Refer to the full-scale template on page 57.

CAUTION

As reveals between cabinetry and the unit decrease, severe nger pinching can occur while the door is closing.

Finish all sides of the custom panels. They will be visible when the door/drawer is open.

D-style handles are recommended. Locate the door handle near the edge of the panel opposite the hinge and centered top to bottom. Locate drawer handles near the top edge of each panel. Stainless steel tubular and pro handles are avail able through an authorized Sub-Zero dealer. For local dealer information, visit the nd a showroom section of our website, subzero.com.

(610). Allow for panel

54 | Sub-Zero Customer Care 800.222.7820

PANEL REQUIREMENTS

WEIGHT PER PANEL MAX

18" Column 45 lb (20 kg) 24" Column 60 lb (27 kg) 30" Column 75 lb (34 kg) 36" Column 75 lb (34 kg)

WEIGHT PER PANEL MAX

30" Tall (door) 50 lb (22 kg) 36" Tall (door) 60 lb (27 kg) Drawer 15 lb (7 kg)

PANEL THICKNESS MIN

All Panels

5

/8" (16)

DESIGNER REFRIGERATION

Custom Panels

TYPICAL PANEL DIMENSIONS

Column

79

(2029)

7

/8"

W

Tall

493/8"

(1254)

139/16"

(345)

1611/16"

(424)

WW

Drawer

Typical panel dimensions are based on an 84" (2134) nished

1

height for column and tall models and 34 models, with a 4"

(102) toe kick and

/2" (876) for drawer

1

/8" (3) reveals. Panel dimensions must be adjusted accordingly for all other installations. Refer to the illustration for panel height and the chart below for panel width.

DOOR PANEL HEIGHT

The height of the custom door panel can extend beyond the typical panel height, provided it does not exceed the weight limit. Refer to the illustration below.

13/4"

(45)

A DECORATIVE VALANCE

CANNOT EXTEND

BEYOND THIS PLANE

24" (610)

TO BACK OF UNIT

84"

(2134)

1

/8" (3)

DOOR PANEL

HINGE

PANEL WIDTH

W

18" Model 173/4" (451)

24" Model 233/4" (603)

27" Model 263/4" (679)

30" Model 293/4" (756)

36" Model 353/4" (908)

DUAL INSTALLATION

For dual installations, refer to the illustration for panel height and the chart below for panel width.

PANEL WIDTH

18" Model 1713/16" (452)

24" Model 2313/16" (605)

27" Model 2613/16" (681)

30" Model 2913/16" (757)

36" Model 3513/16" (910)

W

Upper valance—column and tall (side view)

subzero.com | 55

DESIGNER REFRIGERATION

Custom Panels

TOE KICK CLEARANCE

Indoor Models Only: The height of the toe kick area can

extend beyond the typical toe kick height, provided it does not exceed the dimensions in the illustration below. Toe kick heights from 2"

(51) to 3

kick accessory available through an authorized Sub-Zero dealer. For local dealer information, visit the nd a showroom section of our website, subzero.com. For questions regarding the installation, call Sub-Zero Customer Care at 800-222-7820.

HINGE

DOOR PANEL

2" (51)*

TO

6" (152)

FROM

FLOOR

7

/8" (98) require a reduced toe

**

VENTED

LOUVERS

24" (610)

TO BACK OF UNIT

ADJUSTMENT

A DECORATIVE TOE KICK

CANNOT EXTEND

BEYOND THIS PLANE

11/8" (29)

MAX

TOE KICK

Standard Handles

Optional stainless steel tubular and pro handles are available through an authorized Sub-Zero dealer. For local dealer information, visit the nd a showroom section of our website, subzero.com.

Refer to the chart below for standard handle lengths for Designer models.

HANDLE LENGTH

Column Door 501/8" (1273) 483/8" (1229)

Tall Door 331/4" (845) 311/2" (800)

24" Drawer 211/4" (540) 191/2" (495)

27" Drawer 241/4" (616) 221/2" (572)

30" Drawer 271/4" (692) 251/2" (648)

36" Drawer 331/4" (845) 311/2" (800)

TUBULAR PRO

*2" (51) to 37/8" (98) requires sales accessory. **Column models only.

Toe kick (side view)

56 | Sub-Zero Customer Care 800.222.7820

DESIGNER REFRIGERATION

Maximum Door Opening

FULL-SCALE TEMPLATE

As the panel width and/or depth increases, so does the potential for panel interference. Interference may be minimized by using the 90° door stop.

1

/8" (3) REVEAL

POTENTIAL

INTERFERENCE

ADJACENT

CABINETRY

3

/4" (19) PANEL

DOOR OPEN

MAXIMUM 105°

DOOR CLOSED 3

/4" (19) PANEL

1" (25)0"

SCALE

Maximum door opening (top view)

POTENTIAL INTERFERENCE

subzero.com | 57

WINE STORAGE

58 | Sub-Zero Customer Care 800.222.7820

WINE STORAGE

Wine Storage

Wine nds a well-deserved place of honor in a Sub-Zero wine storage unit. Every detail is designed to ensure better wine preservation. Cherrywood-faced racks, soft lighting, custom cabinetry if desired—Sub-Zero helps make a wine collection an element of beauty in the home.

WINE STORAGE MODELS

UW-24

IW-18

UW-24FS

IW-24

IW-30

IW-30R

IW-30CI

BW-30

subzero.com | 59

WINE STORAGE

Overall Dimensions

MODEL UW-24

237/8" (606) 24" (610)

34"

(864)

4" (102)

253/8"

(645)

MODEL UW-24FS

241/4" (616) 245/8" (625)

343/16"

(868)

4" (102)

253/8"

(645)

13/4" (44)

SPECIFICATIONS

STORAGE CAPACITY BOTTLES*

UW-24 46 UW-24FS 46

SHIPPING WEIGHT LB (KG)

UW-24 195 (88) UW-24FS 220 (100)

*750 ml bottles.

13/4" (44)

Overall dimensions are based on the stainless steel models. Refer to page 83 for door clearance information. Freestanding model UW-24FS has a nished stainless steel exterior and handle.

60 | Sub-Zero Customer Care 800.222.7820

WINE STORAGE

SIDE

NOTE:

.

Opening Dimensions

MODEL UW-24

24" (610)

OPENING

DEPTH

TOP VIEW

341/2"

(876)

OPENING

HEIGHT

VIEW FRONT VIEW

31/2" (89) finished returns will be visible and should be finished to match cabinetry

3

/4" (19)

31/2" (89)

FINISHED

RETURN

W

FRAMELESS

CABINETRY

TYPICAL

W

OPENING WIDTH

31/2" (89)

FINISHED

RETURN

FRAMED

CABINETRY

W

3

/4" (19)

TYPICAL

FILLER

OPENING WIDTH

UW-24 24" (610)

W

DUAL OPENING WIDTH

Two 24" Models* 481/8" (1222)

*Dual installation kit required.

W

subzero.com | 61

WINE STORAGE

691/2"

(1765)

W 24" (610)

84"*

(2134)

41/2" (114)

35/8" (92)

*831/2" (2121) MIN TO 841/2" (2146) MAX

A

B

13/4" (45)

173/4"

(451)

W 24" (610)

84"*

(2134)

109/16"

(268)

447/8"

(1140)

135/16"

(338)

3

/8" (10)

41/2"

(114)

35/8"

(92)

*831/2" (2121) MIN TO 841/2" (2146) MAX

3

/8" (10)

A

B

13/4" (45)

Overall Dimensions

COLUMN

TALL

COLUMN

IW-18 18" (457) 21/2" (64) 161/2" (419)

IW-24 24" (610) 4" (102) 221/2" (572)

IW-30 30" (762) 55/8" (143) 281/2" (724)

62 | Sub-Zero Customer Care 800.222.7820

W A B

TALL

W A B

IW-30R, IW-30CI 30" (762) 55/8" (143) 281/2" (724)

IMPORTANT NOTE: Overall dimensions do not include panels

or handles. Dimensions will vary with panel thickness.

WINE STORAGE

Specications

STORAGE CAPACITY

COLUMN BOTTLES*

IW-18 59 IW-24 102 IW-30 146

TALL REFR FRZR BOTTLES*

IW-30R 4.0 cu ft (113 L) 86 IW-30CI 3.0 cu ft

*750 ml bottles.

SHIPPING WEIGHT

COLUMN LB (KG)

IW-18 350 (159) IW-24 410 (186) IW-30 460 (209)

TALL LB

IW-30R, IW-30CI 490 (222)

(85 L) 2.0 cu ft (57 L) 86

(KG)

subzero.com | 63

WINE STORAGE

NOTE:

SIDE

Opening Dimensions

DESIGNER WINE STORAGE

25" (635)

OPENING

DEPTH

OPENING DIMENSIONS

W*

18" Column 18" (457)

24" Column 24" (610)

30" Column / Tall 30" (762)

*For stainless steel side panel accessory, add 1" (25) per panel to opening width.

TOP VIEW

84"

(2134)

OPENING

HEIGHT

VIEW

31/2" (89) finished returns will be visible and should be finished to match cabinetry.

3

/4" (19)

31/2" (89)

FINISHED

RETURN

TYPICAL

31/2" (89)

FINISHED

RETURN

W

OPENING WIDTH

FRONT VIEW

3

TYPICAL

FILLER

/4" (19)

The depth of each Designer (IW) model is 24" (610). Allow for panel thickness when planning the nished opening

1

depth. A minimum 3

/2" (89) nished return is required on all sides of the opening. Framed cabinets will require additional nished ller material behind the face frame for a proper installation. Refer to the illustration.

DUAL INSTALLATION

The unit can be installed next to an Designer refrigeration model or another Designer wine storage model in a dual installation. When installing two units side by side, the opening width is the width of the two units added together. A dual installation kit is required for this installation. If a dual installation kit is not specied, a minimum 2"

(51) ller strip is

required between the units.

Dual installation kits are available through an authorized Sub-Zero dealer. For local dealer information, visit the nd a showroom section of our website, subzero.com. For questions regarding the installation, call Sub-Zero Customer Care at 800-222-7820.

PRESS-TO-OPEN INSTALLATION

Column Models Only: For information regarding a press-to-

open (handleless) design, refer to the guides section of any Designer column or Designer wine column product page of our website, subzero.com.

W

FRAMELESS

CABINETRY

W

64 | Sub-Zero Customer Care 800.222.7820

FRAMED

CABINETRY

WINE STORAGE

30" (762)

84"

(2134)

4"

(102)

733/4"

(1873)

237/8"

(606)

311/4"

(796)

17"

(432)

237/8" (606)

23/8" (60)

HEIGHT DIMENSIONS ±

1

/2" (13)

263/16" (665)

Overall Dimensions

MODEL BW-30

SPECIFICATIONS

STORAGE CAPACITY BOTTLES*

BW-30 146

SHIPPING WEIGHT LB (KG)

BW-30 445 (202)

*750 ml bottles.

Overall dimensions are based on the stainless steel model.

1

For ush inset applications, add dimensions.

/2" (13) to door clearance

subzero.com | 65

WINE STORAGE

NOTE: Shaded line represents profile of unit

SIDE

Opening Dimensions

MODEL BW-30 STANDARD INSTALLATION

24" (610)

OPENING

833/4"

(2127)

OPENING

HEIGHT

DEPTH

TOP VIEW

W

OPENING WIDTH

31/2" (89)

FINISHED

RETURN

W

FRAMELESS

31/2" (89)

FINISHED

RETURN

W

CABINETRY

FRAMED

CABINETRY

3

/4" (19)

TYPICAL

3

(19)

/4"

TYPICAL

FILLER

VIEW

31/2" (89) finished returns will be visible and should be finished to match cabinetry.

OPENING WIDTH

BW-30 291/2" (749)

66 | Sub-Zero Customer Care 800.222.7820

FRONT VIEW

.

W

If an 83" (2108) grille height is specied, the opening height

7

must be decreased by specied, the opening height must be increased by 4"

/8" (22). If an 88" (2235) grille height is

(102).

If two units are installed side by side, refer to page 68 for dual standard installations.

WINE STORAGE

SIDE

Opening Dimensions

MODEL BW-30 FLUSH INSET INSTALLATION

263/16"

(665)

FLUSH

INSET

DEPTH

23/16"

(56)

FINISHED

CLEATS

511/16"

(145)

FINISHED

RETURN

31/2"

(89)

CLEAT

3

/4" (19)

TYPICAL

VIEW

1

/4"

(6)

84"

(2134)

FLUSH

INSET

HEIGHT

TOP VIEW

11/4"

(32)

W

FLUSH INSET WIDTH

FRONT VIEW

511/16"

(145)

FINISHED

RETURN

W

FRAMELESS

CABINETRY

31/2"

(89)

W

FRAMED

CABINETRY

CLEAT

FILLER

3

/4" (19)

TYPICAL

NOTE: 31/2" (89) finished returns and shaded areas will be visible and should be finished to match cabinetry. Shaded line represents profile of unit with

FLUSH INSET WIDTH

BW-30 32" (813)

3

/4" (19) panel.

W

Flush inset is available for overlay models only.

Dimensions assume a

If an 83" height must be decreased by height is specied, the ush inset height must be increased by 4"

If two units are installed side by side, refer to page 69 for dual ush inset installations.

3

/4" (19) panel thickness.

(2108) grille height is specied, the ush inset

7

/8" (22). If an 88" (2235) grille

(102).

subzero.com | 67

WINE STORAGE

NOTE: Shaded line represents profile of unit

SIDE

Opening Dimensions

MODEL BW-30 DUAL STANDARD INSTALLATION

833/4"

(2127)

OPENING

HEIGHT

24" (610)

OPENING

DEPTH

TOP VIEW

W

OPENING WIDTH

31/2" (89)

FINISHED

RETURN

W

31/2"

FINISHED

RETURN

W

FRAMELESS

CABINETRY

(89)

FRAMED

CABINETRY

3

/4" (19)

TYPICAL

3

(19)

/4"

TYPICAL

FILLER

VIEW

31/2" (89) finished returns will be visible and should be finished to match cabinetry.

DUAL OPENING WIDTH

BW-30 and 30" Classic Model 593/4" (1518)

BW-30 and 36" Classic Model 653/4" (1670)

68 | Sub-Zero Customer Care 800.222.7820

FRONT VIEW

.

W

A dual installation kit is required for this installation.

WINE STORAGE

SIDE

NOTE: Shaded line represents profile of unit with

Opening Dimensions

MODEL BW-30 DUAL FLUSH INSET INSTALLATION

263/16"

(665)

FLUSH

INSET

23/16"

DEPTH

(56)

FINISHED

CLEATS

511/16"

(145)

FINISHED

RETURN

31/2"

(89)

CLEAT

3

/4" (19)

TYPICAL

VIEW

1

/4"

(6)

84"

(2134)

FLUSH

INSET

HEIGHT

11/4"

(32)

TOP VIEW

W

FLUSH INSET WIDTH

FRONT VIEW

511/16"

(145)

FINISHED

RETURN

W

FRAMELESS

CABINETRY

31/2"

(89)

W

FRAMED

CABINETRY

CLEAT

FILLER

3

/4" (19)

TYPICAL

31/2" (89) finished returns and shaded areas will be visible and should be finished to match cabinetry.

DUAL FLUSH INSET WIDTH

BW-30 and 30" Classic Model 621/4" (1581)

BW-30 and 36" Classic Model 681/4" (1734)

3/4" (19) panel.

W

Flush inset is available for overlay models only.

3

Dimensions assume a

/4" (19) panel thickness. A dual instal-

lation kit is required for this installation.

subzero.com | 69

WINE STORAGE

Electrical Requirements

Locate the electrical supply within the shaded area shown in the illustration for your specic model. For Designer (IW) models, also refer to the chart. A separate circuit servicing only this appliance is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation.

If the unit will be connected to a home security system, allow 36"

(914) of excess wiring for proper connection.

IMPORTANT NOTE: For Designer and Undercounter models,

the electrical outlet must be positioned with the grounding prong to the right of the thinner blades.

Installation must comply with all applicable electrical codes.

ELECTRICAL REQUIREMENTS

Electrical Supply 115 VAC, 60 Hz

Service 15 amp dedicated circuit

Receptacle 3-prong grounding-type

LEFT SIDE

OF OPENING

7"

(178)

E

ELECTRICAL LOCATION—DESIGNER

18" Model 6" (152)

24" Model 91/2" (241)

30" Model 121/2" (318)

LEFT SIDE

OF OPENING

41/2"

(114)

1

/4" (6)1/4" (6)

A

FLOOR

41/4"

(108)

Designer models

A

2"

(51)

Model UW-24

151/2"

(394)

FLOOR

3" (76)

FROM FLOOR

Model BW-30

751/2" (1918)

RIGHT SIDE

OF OPENING

6"

(152)

70 | Sub-Zero Customer Care 800.222.7820

WINE STORAGE

Plumbing Requirements

MODEL IW-30CI

For model IW-30CI, locate the water supply line within the shaded area shown in the illustration below. Connect the water supply line to the house supply with an easily accessible shut-off valve. Do not use self-piercing valves. The water supply line must not interfere with installation of the anti-tip bracket.

A reverse osmosis system can be used provided there is constant water pressure of 35–120 psi to the unit at all times. A copper line is not recommended for this application.

Installation must comply with all applicable plumbing codes.

(2.4–8.3 bar) supplied

PLUMBING REQUIREMENTS

Water Supply

1

/4" OD copper, braided stainless

steel, or PEX tubing

Pressure 35–120 psi

(2.4–8.3 bar)

Excess Line for Connection 36" (914)

WATER SUPPLY LOCATION

IW-30CI 6" (152)

RIGHT SIDE

OF OPENING

6" (152)

A

3" (76)

1

AREA EXTENDS

FORWARD ON FLOOR

/2" (13)

Water supply location

A

subzero.com | 71

WINE STORAGE

A

Custom Panels

For framed, overlay, Designer, and ush inset applications, a custom door panel must be provided. Handle hardware must also be provided for overlay, Designer, and ush inset applications. Refer to the panel requirements and custom panel dimensions charts for your specic model and design application.

Do not install a solid panel on a glass door unit. A solid door is available as a sales accessory (except model BW-30) and must be installed if a solid panel is being specied. Service may be required to install the door. Contact an authorized Sub-Zero dealer for more information. Overall dimensions are the same for glass and solid door panels.

Finish all sides of the custom panels. They may be visible when the door is open or through the window of glass door models.

Model UW-24FS has a nished stainless steel exterior that is designed to be used in a freestanding application.

Custom Panel—UW-24

For model UW-24, the custom door panel will attach directly to the door frame with screws through a series of pre-drilled holes.

Refer to the charts below for panel requirements and dimensions.

PANEL REQUIREMENTS

WEIGHT PER PANEL MAX

UW-24 10 lb (5 kg)

PANEL THICKNESS MIN

UW-24

OVERLAY PANEL DIMENSIONS

AA

UW-24

H

A

W

5

/8" (16)

PANEL DIMENSIONS

PANEL W H

UW-24 233/4" (603) 301/16" (764)

STILES / RAILS A

Minimum 21/4" (57)

DOOR CLEARANCE

Model UW-24 can be installed ush with surrounding cabinetry. Depending on the thickness of the overlay door panel,

1

it may be necessary to install the unit

/4" (6) beyond the front surface of adjacent cabinetry to prevent interference when the door is opened to 145°. Refer to the full-scale template on page 83.

72 | Sub-Zero Customer Care 800.222.7820

WINE STORAGE

Custom Panel—Designer

For Designer (IW) models, custom door panels and handle hardware must be provided. Refer to the Panel Requirements chart and Typical Panel Dimensions.

Do not install a solid panel on the glass door unit. A solid door is available as a sales accessory through an authorized Sub-Zero dealer.

The thickness of the custom panel can vary. A minimum

5

/8" (16) thick panel is required, but the thickness can be increased provided it does not exceed the weight limit. The depth of each Designer model is 24"

(610). Allow for panel

thickness when planning the nished opening depth. Refer to the full-scale template on page 57.

CAUTION

As reveals between cabinetry and the unit decrease, severe nger pinching can occur while the door is closing.

Finish all sides of the custom panels. They will be visible when the door/drawer is open.

D-style handles are recommended. Locate the door handle near the edge of the panel opposite the hinge and centered top to bottom. Locate drawer handles near the top edge of each panel. Stainless steel tubular and pro handles are avail able through an authorized Sub-Zero dealer. For local dealer information, visit the nd a showroom section of our website, subzero.com.

PANEL REQUIREMENTS

WEIGHT PER PANEL MAX

Door Frame (column) 35 lb (16 kg) Door Frame (tall) 25 lb (11 kg) Drawer Panel (tall) 15 lb (7 kg)

PANEL THICKNESS MIN

All Panels

5

/8" (16)

TYPICAL PANEL DIMENSIONS

Column

7

/8"

79

(2029)

W

Tall

493/8"

(1254)

139/16"

(345)

1611/16"

(424)

Typical panel dimensions are based on an 84" (2134) nished height, 4"

(102) toe kick, and

1

/8" (3) reveals. Panel dimensions must be adjusted accordingly for all other installations. Refer to the illustration for panel height and the chart below for panel width.

PANEL WIDTH

MODEL W

18" Model 173/4" (451) 24" Model 233/4" (603) 30" Model 293/4" (756)

STILES / RAILS MIN

Stiles 31/4" (83) Top Rail 73/4" (197) Bottom Rail (column) 91/2" (241) Bottom Rail (tall) 41/2" (114)

DUAL INSTALLATION

For dual installations, refer to the illustration for panel height and the chart below for panel width.

PANEL WIDTH

MODEL W

18" Model 1713/16" (452) 24" Model 2313/16" (605) 30" Model 2913/16" (757)

subzero.com | 73

WINE STORAGE

Custom Panel—Designer

DOOR PANEL HEIGHT

The height of the custom door panel can extend beyond the typical panel height, provided it does not exceed the weight limit. Refer to the illustration below.

13/4"

(45)

A DECORATIVE VALANCE

1

/8" (3)

DOOR PANEL

84"

(2134)

HINGE

Upper valance (side view)

CANNOT EXTEND

BEYOND THIS PLANE

24" (610)

TO BACK OF UNIT

TOE KICK CLEARANCE

The height of the toe kick area can extend beyond the typical toe kick height, provided it does not exceed the dimensions in the illustration below. Toe kick heights from

(51) to 3

2"

7

/8" (98) require a reduced toe kick accessory available through an authorized Sub-Zero dealer. For local dealer information, visit the nd a showroom section of our website, subzero.com. For questions regarding the installation, call Sub-Zero Customer Care at 800-222-7820.

VENTED

LOUVERS

24" (610)

TO BACK OF UNIT

11/8" (29)

MAX

TOE KICK

ADJUSTMENT

A DECORATIVE TOE KICK

CANNOT EXTEND

BEYOND THIS PLANE

2" (51)*

TO

6" (152)

FROM

FLOOR

HINGE

DOOR PANEL

**

74 | Sub-Zero Customer Care 800.222.7820

*2" (51) to 37/8" (98) requires sales accessory. **Column models only.

Toe kick (side view)

WINE STORAGE

AA

Custom Panel—BW-30

FRAMED

The framed application is an overlay model with framed design features. It is not a separate model.

1

If the custom panel is thinner than

/4" (6), a ller material

must be added to achieve a proper t. If the panel is thicker

1

/4" (6), rout an edge around the panel or mount the

than custom panel on a sheet of

1

/4" (6) thick material and insert

into the channel.

Routing, recessing, and optional extended handles may be required for nger clearance. Refer to the full-scale template on page 84.

PANEL REQUIREMENTS

WEIGHT PER PANEL MAX

Door 75 lb (34 kg) Grille (optional) 13 lb (6 kg)

PANEL THICKNESS MIN

Framed

1

/4" (6)

FRAMED PANEL DIMENSIONS

H

A

H

A

W

BW-30

PANEL DIMENSIONS

FRAMED PANEL W H

Door 293/4" (756) 699/16" (1767) Grille (optional) 293/4" (756) 815/16" (227)

STILES / RAILS A

Minimum 33/16" (81)

subzero.com | 75

WINE STORAGE

AA

Custom Panel—BW-30

OVERLAY

Overlay panels are typically created by combining a 3/4" (19) custom panel, a .10"

(3) spacer panel, and a

1

/4" (6) backer

panel. Refer to the illustrations below.

PANEL REQUIREMENTS

WEIGHT PER PANEL MAX

Door 75 lb (34 kg) Grille 13 lb (6 kg)

PANEL THICKNESS MIN

Overlay

SPACER PANEL

CUSTOM PANEL

BACKER PANEL

DOOR FRAME

1

/8"

(3)

TRIM

5

/16" (8) min

GLASS

CUSTOM

3

/4"

(19)

typical

PANEL

.10" (3)

Panel assembly (cross section) Panel assembly (rear view)

1

/4" (6)

5

SPACER

PANEL

BACKER

PANEL

/8" (16)

OVERLAY PANEL DIMENSIONS

H

A

H

A

W

BW-30

OVERLAY PANELS

DOOR W H

Overlay Panel 30" (762) 693/4" (1772) Spacer Panel 291/8" (740) 6815/16" (1751) Backer Panel 293/4" (756) 699/16" (1767)

GRILLE W H

Overlay Panel 30" (762) 91/4" (235)*

1

Spacer Panel 29

/8" (740) 85/16" (211)

Backer Panel 293/4" (756) 815/16" (227)

STILES / RAILS A

Minimum 31/4" (83)

*Panel height may be increased by refer to Classic panel congurator at subzero.com/trade/panels.

Grille panel dimensions are for standard 84"

(2108)

height, subtract 1" (25) from grille panel height dimensions and for 88"

(2235)

height, add 4" (102). A specic panel grille must be ordered for an 83"

or 88" overall unit height.

7

/16" (11) to hide upper main frame. Also

(2134) overall unit height. For 83"

76 | Sub-Zero Customer Care 800.222.7820

WINE STORAGE

AA

Custom Panel—BW-30

FLUSH INSET

The ush inset application is an overlay model with ush inset panels. It is not a separate model.

The ush inset design allows custom panels to be installed ush with adjacent cabinets. Similar to overlay, ush inset

3

panels are typically created by combining a panel, a .10"

(3) spacer panel, and a

1

/4" (6) backer panel.

/4" (19) custom

Refer to the illustrations for overlay panels on the previous page.

3

For ush inset panels thicker than

/4" (19), a 90° door stop may be required to prevent interference with adjacent cabinets. Refer to the full-scale template on page 87.

PANEL REQUIREMENTS

WEIGHT PER PANEL MAX

Door 75 lb (34 kg) Grille 13 lb (6 kg)

PANEL THICKNESS MIN

Flush Inset

5

/8" (16)

FLUSH INSET PANEL DIMENSIONS

H

A

H

A

W

BW-30

FLUSH INSET PANELS

DOOR W H

Flush Inset Panel 31" (787) 693/4" (1772) Spacer Panel 291/8" (740) 6815/16" (1751) Backer Panel 293/4" (756) 699/16" (1767)

GRILLE W H

Flush Inset Panel 31" (787) 91/4" (235) Spacer Panel 291/8" (740) 85/16" (211) Backer Panel 293/4" (756) 815/16" (227)

STILES / RAILS A

Minimum 33/4" (95)

Grille panel dimensions are for standard 84" 83"

(2108) height, subtract 1" (25) from grille panel height dimensions and for

88"

(2235) height, add 4" (102). A specic panel grille must be ordered for an

83" or 88" overall unit height.

(2134) overall unit height. For

subzero.com | 77

WINE STORAGE

1

/4" (6)

REVEAL

5

/16" (8)

1

/8" (3)

DOOR DOOR

TOP VIEW

5

/8"

(16)

5

/16" (8)

1

/2"

(13)

1

/2"(13)

3

/32"

(2)

5

/16"

(8)

5

/16"

(8)

5

/32"

(4)

GRILLE

DOOR

1

/4" (6)

REVEAL

5

/16" (8)

1

/8" (3)

FLUSH INSET PANEL

SPACER

BACKER

DOOR DOOR

DOOR / DRAWER / GRILLE

TOP VIEWTOP VIEW

SIDE VIEW

CABINETRY

1

/4" (6)

REVEAL

5

/16" (8)

1

/8" (3)

DOOR DOOR

TOP VIEWTOP VIEW

1

/2"(13)

3

/32"

(2)

5

/16"

(8)

5

/16"

(8)

5

/32"

(4)

GRILLE

DOOR

1

/4" (6)

REVEAL

1

/8" (3)

DOOR DOOR

TOP VIEWTOP VIEW

Custom Panel—BW-30

FLUSH INSET PANEL OFFSET

The illustrations provide panel offsets and reveals for model BW-30 in a ush inset application. Refer to the chart below for reference to the illustrations.

PANEL OFFSET

Door / Grille Sides A

Grille Top B

Grille Bottom / Door Top C

Door Bottom D

ILLUS

5

/16"

TOP VIEW

DOOR / DRAWER / GRILLE

BACKER

SPACER

FLUSH INSET PANEL

Illus. A

GRILLE

DOOR

Illus. C

CABINETRY

(8)

5

/8"

(16)

5

/16"

(8)

5

/16"

(8)

SIDE VIEW

1

/2"

(13)

5

/32"

(4)

1

/2"(13)

3

/32"

(2)

Illus. B

DOOR /

DRAWER

SIDE VIEW

Illus. D

CABINETRY

GRILLE

1

/2"(13)

1

/8"

5

/16"

(3)

(8)

SIDE VIEW

5

/16"

(8)

3

/32" (4) DOOR

5

/32" (2) DRAWER

78 | Sub-Zero Customer Care 800.222.7820

WINE STORAGE

AA

Custom Panel—BW-30

DUAL INSTALLATIONS

A dual installation kit may be required if two models BW-30 or a model BW-30 and a Classic unit are installed side by side. Installations without a custom ller strip require a dual installation kit. If a dual installation kit is not specied, a

(51) ller strip is recommended between the units. Dual

2" installations without a ller strip can only be accomplished using two 84"

(2134) units with opposite hinges. Refer to the

illustrations below.

Dual installation kits are available through an authorized Sub-Zero dealer. For local dealer information, visit the nd a showroom section of our website, subzero.com. For questions regarding the installation, call Sub-Zero Customer Care at 800-222-7820.

For dual standard installations, panel dimensions are the same as for single installations. Refer to the chart on page

76. Panel dimensions and offsets for dual ush inset installations are listed on the following pages.

DUAL FLUSH INSET PANEL DIMENSIONS

H

A

H

A

W

BW-30

DUAL FLUSH INSET PANELS

DOOR W H

Flush Inset Panel 301/2" (775) 693/4" (1772) Spacer Panel 291/8" (740) 6815/16" (1751) Backer Panel 293/4" (756) 699/16" (1767)

GRILLE W H

Flush Inset Panel 301/2" (775) 91/4" (235) Spacer Panel 291/8" (740) 85/16" (211) Backer Panel 293/4" (756) 815/16" (227)

STILES / RAILS A

Minimum 33/4" (95)

Grille panel dimensions are for standard 84"

(2134) overall unit height.

WITHOUT FILLER STRIP

Opposite hinges

FILLER STRIP

Same side hinges

subzero.com | 79

WINE STORAGE

1

/4" (6)

REVEAL

5

/16" (8)

1

/8" (3)

DOOR DOOR

TOP VIEW

5

/8"

(16)

5

/16"

(8)

1

/2"

(13)

1

/2"(13)

3

/32"

(2)

5

/16"

(8)

5

/16"

(8)

5

/32"

(4)

GRILLE

DOOR

1

/4" (6)

REVEAL

5

/16" (8)

1

/8" (3)

FLUSH INSET PANEL

SPACER

BACKER

DOOR DOOR

DOOR / DRAWER / GRILLE

TOP VIEWTOP VIEW

SIDE VIEW

CABINETRY

1

/4" (6)

REVEAL

5

/16" (8)

1

/8" (3)

DOOR DOOR

TOP VIEWTOP VIEW

1

/2"(13)

3

/32"

(2)

5

/16"

(8)

5

/16"

(8)

5

/32"

(4)

GRILLE

DOOR

1

/4" (6)

REVEAL

1

/8" (3)

DOOR DOOR

TOP VIEWTOP VIEW

Custom Panel—BW-30

DUAL FLUSH INSET PANEL OFFSET

The illustrations provide panel offsets and reveals for model BW-30 in a dual ush inset application. Refer to the chart below for reference to the illustrations.

PANEL OFFSET

Door (hinge) / Grille Sides A

Door (handle) Sides B

Grille Top C

Grille Bottom / Door Top D

Door Bottom E

GRILLE

DOOR /

TOP VIEW

5

(8)

/16"

CABINETRY

5

/8"

(16)

5

/16"

(8)

SIDE VIEW

5

/16"

(8)

1

(3)

1 (13)

1

/8"

/2"

/2"(13)

DOOR DOOR

5

/16" (8)

Illus. B

Illus. D

DOOR / DRAWER / GRILLE

BACKER

SPACER

ILLUS

FLUSH INSET PANEL

Illus. A

Illus. C

DRAWER

1

/8" (3)

GRILLE

DOOR

TOP VIEW

DUAL TRIM

1

/4" (6)

REVEAL

5

/16"

(8)

5

/16"

(8)

SIDE VIEW

5

/32"

(4)

1

/2"(13)

3

/32"

(2)

80 | Sub-Zero Customer Care 800.222.7820

SIDE VIEW

Illus. E

3

/32" (4) DOOR

5

/32" (2) DRAWER

WINE STORAGE

84"

(2134)

24"

(610)

OPTIONAL

TOE KICK CUT-OUT

4" (102)

17/8"(48)

1" (25)

ROUT TO

1

/8"

(3)

FRONT

OF SIDE

PANEL

25/8"

(67)

MAIN

FRAME

SIDE PANEL

ROUTING

1" (25)

17/8" (48)

1

/8" (3)

1

/2" (13)

Custom Panel—BW-30

SIDE PANEL

The custom side panel must be a minimum of 24" (610) deep

1

/2" (13) thick. Routing will be necessary for the side

and panel to t ush against the side of the unit. Refer to the illustrations below.

When installing model BW-30 with a custom side panel, an accessory kit is required. Stainless steel and white enamel side panels are available for an 84" through an authorized Sub-Zero dealer. For local dealer information, visit the nd a showroom section of our website, subzero.com.

(2134) nished height

Standard Handles

Optional stainless steel tubular and pro handles are available through an authorized Sub-Zero dealer. For local dealer information, visit the nd a showroom section of our website, subzero.com.

Refer to the chart below for standard handle lengths for wine storage models.

HANDLE LENGTH

UW-24 Door 241/4" (616) 221/4" (572)

IW-18, IW-24, IW-30 Door 501/8" (1273) 483/8" (1229)

IW-30R Door 331/4" (845) 311/2" (800)

IW-30R Drawer 241/4" (616) 221/2" (572)

BW-30 Door 637/8" (1622) 453/16" (1147)

TUBULAR PRO

Side panel dimensions

Routing detail

subzero.com | 81

WINE STORAGE

Wine Rack Wood Facing

FULL-SCALE TEMPLATE

The natural cherrywood facing on wine storage racks can be stained and sealed, or replaced with wood more complementary to surrounding cabinetry. Refer to the full-scale template below for the prole dimensions of the wood facing and the chart for the width.

1

/2"

(13)

1

/4"

(6)

7

/64"

5

/64"

(3)

/64"

(2)

11/2"

(38)

27

/32"

(21)

7

/32" (6)

9

23

/16"

(14)

(9)

WOOD FACING WIDTH

UW-24, UW-24FS 191/2" (495)

IW-18 115/8" (295)

IW-24 175/8" (448)

IW-30, IW-30R, IW-30CI 235/8" (600)

BW-30 249/16" (624)

W

Wine rack wood facing prole

82 | Sub-Zero Customer Care 800.222.7820

WINE STORAGE

Door Clearance—UW-24

FULL-SCALE TEMPLATE

To allow for a 145° door opening, the unit should extend

1

a minimum of

/4" (6) beyond the front surface of adjacent cabinetry. The unit can be installed ush, however, there is potential for interference with the panel if the door is opened past 90°.

UNDERCOUNTER

UNIT

DOOR CLOSED

1

/2"

(13)

ADJACENT

CABINETRY

1" (25)0"

SCALE

145° door opening (top view)

3

/4" (19) DOOR PANEL

1

/4"

(6)

1

/8" (3)

HINGE AT 145°

OPENING

(DOOR OPENS PAST 145°)

subzero.com | 83

WINE STORAGE

Framed Panel—BW-30

FULL-SCALE TEMPLATE

OPTIONAL EXTENDED FULL-LENGTH HANDLE

1"

(25)

1

/4" (6) FRAMED PANEL

STANDARD FULL-LENGTH HANDLE

2"

(51)

DOOR

3"

(76)

11/4" (32) PANEL

1" (25) PANEL

3

/4" (19) PANEL

1

/2" (13) PANEL

Framed panel thickness

84 | Sub-Zero Customer Care 800.222.7820

WINE STORAGE

Overlay | Flush Inset Panels—BW-30

FULL-SCALE TEMPLATE

Overlay and ush inset panels must be a minimum of 5/8"

(16)

thick to support mounting the handle. Panel thickness does not include the backer and spacer panels. Mount the handle close to the opening edge of the door.

1"

(25)

1

/4" (6) BACKER PANEL

DOOR

DEPTH OF TUBULAR AND PRO HANDLES

2"

(51)

3"

(76)

11/4" (32) PANEL

1" (25) PANEL

3

/4" (19) PANEL

.10" (3) SPACER PANEL

Overlay and ush inset panel thickness

subzero.com | 85

WINE STORAGE

237/8"

(606)

TO REAR OF UNIT

OVERALL WIDTH OF UNIT

1

/

4

"

(32)

1

/

2

"

(38)

1

3

/

4

"

(44)

0"

(0)

1"

(25)

2"

(51)

2

1

/

4

"

(57)

2

1

/

2

"

(63)

2

3

/

4

"

(70)

3"

(76)

3

1

/

4

"

(83)

3

1

/

2

"

(89)

1

/

4

"

(6)

1

/

2

"

(13)

3

/

4

"

(19)

3

/4"

(19) THICK

OVERLAY PANEL

(TYPICAL)

1

/4"

(6) BACKER

PANEL

1"

(25) THICK

PANEL

Overlay Application—BW-30

FULL-SCALE TEMPLATE

90° door opening (top view)

86 | Sub-Zero Customer Care 800.222.7820

1" (25)0"

SCALE

WINE STORAGE

Flush Inset Application—BW-30

24"

FULL-SCALE TEMPLATE

For panels thicker than 3/4" (19), a 90° door stop may be required to prevent interference with adjacent cabinets.

(610)

TO BACK WALL

23/16"

(56)

ASSUMES

3

/4" (19)

FLUSH INSET

PANEL

THICKNESS

11/4" (32)

1" (25) THICK

PANEL

3

/4" (19) THICK

FLUSH INSET PANEL

(TYPICAL)

1

/4" (6) BACKER

PANEL

110° door opening (top view)

1" (25)0"

SCALE

subzero.com | 87

WINE STORAGE

FILLER STRIP

11/4" (32)

APPROX PROFILE OF

STAINLESS STEEL WRAPPED

DOOR AND HANDLE

Dual Standard Installation—BW-30

FULL-SCALE TEMPLATE

Typical framed, overlay, or stainless steel dual installation with ller strip at maximum 110° door opening. Panel thickness may require a 90° door stop.

DOOR

CLOSED

DOOR

OPEN 110°

1" (25)0"

SCALE

Dual standard installation (top view)

88 | Sub-Zero Customer Care 800.222.7820

WINE STORAGE

FILLER STRIP

11/2" (38)

1

/2" (13)

PROFILE OF

3

(19) FLUSH INSET PANEL

/4"

AND TUBULAR HANDLE

Dual Flush Inset Installation—BW-30

FULL-SCALE TEMPLATE

Typical ush inset dual installation with ller strip at maximum 110° door opening. Panel thickness may require a 90° door stop.

DOOR

CLOSED

DOOR

OPEN 110°

1" (25)0"

SCALE

Dual ush inset installation (top view)

subzero.com | 89

UNDERCOUNTER REFRIGERATION

90 | Sub-Zero Customer Care 800.222.7820

UNDERCOUNTER REFRIGERATION

Undercounter Refrigeration

Sub-Zero Undercounter refrigeration is a helpful addition to a master suite, bar, home ofce, or media room. In the kitchen, a high-volume ice maker is a must for entertaining. The design exibility of these compact yet roomy units makes them all the more welcome in any room or outdoor kitchen. They are ready to be tted with a custom panel and handle or can be ordered with a stainless steel panel and handle.

UNDERCOUNTER MODELS

UC-24R

UC-24RO

UC-24BG

ICE MAKER MODELS

UC-24C(I)

UC-15I(P)

UC-15I(P)O

subzero.com | 91

UNDERCOUNTER REFRIGERATION

Overall Dimensions

UNDERCOUNTER

237/8" (606)

34"

(864)

253/8"

(645)

4" (102)

24" (610)

ICE MAKER

143/4" (375) 23" (584)

335/8"

(854)

4" (102)

18"

(457)

6"

(152)

26" (660) 8"

(203)

SPECIFICATIONS

INTERIOR CAPACITY—CU FT (L) REFR FRZR

UC-24R, UC-24RO 5.7 (161) UC-24BG 6.0 (170) UC-24C(I) 3.6 (102) 1.1 (31)

SHIPPING WEIGHT LB

(KG)

24" Model 130 (59)

Refer to page 99 for door clearance information.

SPECIFICATIONS

STORAGE CAPACITY LB (KG)

UC-15I(P), UC-15I(P)O 26 (12)

SHIPPING WEIGHT LB

(KG)

Ice Maker 100 (45)

Model UC-15I overall dimensions do not include the panel or handle.

92 | Sub-Zero Customer Care 800.222.7820

UNDERCOUNTER REFRIGERATION

SIDE

NOTE:

.

Opening Dimensions

UNDERCOUNTER

24" (610)

OPENING

DEPTH

TOP VIEW

341/2"

(876)

OPENING

HEIGHT

VIEW FRONT VIEW

31/2" (89) finished returns will be visible and should be finished to match cabinetry

W

OPENING WIDTH

DUAL INSTALLATION

If two units are installed side by side, a dual installation kit may be required. Installations without a custom ller strip require a dual installation kit. If a dual installation kit is not specied, a 2"

(51) ller strip is recommended between the

units. Dual installations without a ller strip can only be accomplished using two units with opposite hinges. Refer to the illustrations below.

Dual installation kits are available through an authorized Sub-Zero dealer. For local dealer information, visit the nd a showroom section of our website, subzero.com. For questions regarding the installation, call Sub-Zero Customer Care at 800-222-7820.

3

/4" (19)

TYPICAL

FILLER

31/2" (89)

FINISHED

RETURN

W

FRAMELESS

CABINETRY

3

/4" (19)

TYPICAL

31/2" (89)

FINISHED

RETURN

W

FRAMED

CABINETRY

OPENING WIDTH

24" Model 24" (610)

Ice Maker 151/4" (387)

DUAL OPENING WIDTH

Two 24" Models 481/8" (1222)

Dual installation kit required.

WITHOUT FILLER STRIP

Opposite hinges

W

Same side hinges

FILLER STRIP

subzero.com | 93

UNDERCOUNTER REFRIGERATION

Electrical Requirements

Locate the electrical supply within the shaded area shown in the illustrations below. A separate circuit servicing only this appliance is required.

IMPORTANT NOTE: For 24" models, the electrical outlet

must be positioned with the grounding prong to the right of the thinner blades.

IMPORTANT NOTE: For outdoor models UC-24RO and

UC-15I(P)O, a ground fault circuit interrupter (GFCI) is required to reduce the risk of electrical shock. A GFCI is not recommended for use with other Undercounter models and may cause interruption of operation.

Installation must comply with all applicable electrical codes.

LEFT SIDE

OF OPENING

LOCATE

ELECTRICAL

SUPPLY IN

E

ADJACENT

CABINET

E

2"

(51)

151/2"

(394)

FLOOR

3" (76)

ELECTRICAL REQUIREMENTS

Electrical Supply 115 VAC, 60 Hz

Service 15 amp dedicated circuit

Receptacle 3-prong grounding-type

24" Models

Ice maker

94 | Sub-Zero Customer Care 800.222.7820

UNDERCOUNTER REFRIGERATION

24" (610)

ROUGH

OPENING

DEPTH

Plumbing Requirements

Locate the water supply line within the shaded area shown in the illustrations below. Connect the water supply line to the house supply with an easily accessible shut-off valve between the supply and the unit. Do not use self-piercing valves. A saddle valve kit is avail able through an authorized Sub-Zero dealer. For local dealer information, visit the nd a showroom section of our website, subzero.com.

IMPORTANT NOTE: A reverse osmosis system can be used

provided there is constant water pressure supplied to the unit at all times as indicated in the chart below. A copper line is not recommended for this application.

PLUMBING REQUIREMENTS

Water Supply

Pressure (UC-24CI) 20–100 psi

Pressure (UC-15I) 20–80 psi (1.4–5.5 bar)

Excess Line for Connection 36" (914)

LEFT SIDE

OF OPENING

2"

151/2"

(51)

(394)

1

AREA EXTENDS

FORWARD ON FLOOR

/2" (13)

3" (76)

1

/4" OD copper, braided stainless

steel, or PEX tubing

(1.4–6.9 bar)

8"

(203)

1

/2"

(13)

LOCATION OF

WATER LINE

TOP VIEW

ICE MAKER DRAIN

Ice maker models can be ordered with or without a drain pump. Models without a pump will drain water by gravity. A drain must be installed.

The drain and inlet water tubes must be plumbed before connecting to the ice maker. For the gravity drain, horizontal

1

drain lines must have a

/4" (6) per 12" (305) fall. An air gap will likely be required between the unit and drain. A stand pipe with a trap below is acceptable for the drain.

Model UC-24CI

Ice maker

subzero.com | 95

UNDERCOUNTER REFRIGERATION

Custom Panel

For overlay Undercounter models, a custom door panel and handle hardware must be provided. Refer to the charts for panel requirements and dimensions.

Finish all sides of the custom panels. They may be visible when the door is open or through the window of glass door models.

PANEL REQUIREMENTS

WEIGHT PER PANEL MAX

UC-24R, UC-24C(I) 20 lb (9 kg) UC-24BG 10 lb (5 kg) UC-15I(P) 15 lb (7 kg)

PANEL THICKNESS MIN

All Panels

5

/8" (16)

MODEL UC-24BG

For model UC-24BG, the custom door panel will attach directly to the door frame with screws through a series of pre-drilled holes.

Do not install a solid panel on a glass door unit. A solid door is available as a sales accessory and must be installed if a solid panel is specied. Service may be required to install the door. Contact an authorized Sub-Zero dealer for more information. Overall dimensions are the same for glass and solid door panels.

96 | Sub-Zero Customer Care 800.222.7820

UNDERCOUNTER REFRIGERATION

A

Custom Panel

OVERLAY PANEL DIMENSIONS

H

W

UC-24R, UC-24C(I), UC-15I(P)

PANEL DIMENSIONS

MODEL W H

24" Model 233/4" (603) 301/16" (764) Ice Maker 15" (381) 303/8" (772)

STILES / RAILS A

UC-24BG 21/4" (57) min

AA

W

UC-24BG

DOOR CLEARANCE

Undercounter models can be installed ush with surrounding cabinetry. Depending on the thickness of the custom door panel, it may be necessary to install the unit

1

/4" (6) beyond the front surface of adjacent cabinetry to prevent interference when the door is opened to 145°. Refer to the full-scale template on page 99.

H

A

Standard Handles

Optional stainless steel tubular and pro handles are available through an authorized Sub-Zero dealer. For local dealer information, visit the nd a showroom section of our website, subzero.com.

Refer to the chart below for standard handle lengths for Undercounter models.

HANDLE LENGTH

Undercounter 241/4" (616) 221/2" (572)

Outdoor Model NA 1511/16" (399)

TUBULAR PRO

subzero.com | 97

UNDERCOUNTER REFRIGERATION

Wine Rack Wood Facing

FULL-SCALE TEMPLATE

The natural cherrywood facing on wine storage racks can be stained and sealed, or replaced with wood more complementary to surrounding cabinetry. Refer to the full-scale template below for the prole dimensions of the wood facing and the chart for the width.

1

/2"

(13)

23

9

/16"

(14)

1

(6)

/64"

(9)

/4"

5

7

/64"

(3)

(2)

11/2"

(38)

5

/8"

(16)

7

/64" (3)

27

/32"

(21)

23

/64"

(9)

9

/16"

(14)

5

/64"

(2)

WOOD FACING WIDTH

UC-24BG 191/2" (495)

UC-24C(I) 191/2" (495)

W

-18, IW-24,

-30, IW-30R

424G, UW-24, 424FSG

UW-24FS, WS-30, BW-30

Wine rack wood facing prole

Sub-Zero, Sub-Zero & Design, Sub-Zero & Snowake Design, Dual Refrigeration, The Living Kitchen, Great American Kitchens The Fine Art of Kitchen Design, Wolf, Wolf & Design, Wolf Gourmet, W & Design, red colored knobs, Cove, and Cove & Design are registered trademarks and service marks of Sub-Zero Group, Inc. and its subsidiaries. All other trademarks are property of their respective owners in the United States and other countries.

98 | Sub-Zero Customer Care 800.222.7820

UNDERCOUNTER REFRIGERATION

Door Clearance—Undercounter

FULL-SCALE TEMPLATE

To allow for a 145° door opening, the unit should extend

1

a minimum of

/4" (6) beyond the front surface of adjacent cabinetry. The unit can be installed ush, however, there is potential for interference with the panel if the door is opened past 90°.

UNDERCOUNTER

UNIT

DOOR CLOSED

1

/2"

(13)

ADJACENT

CABINETRY

1" (25)0"

SCALE

145° door opening (top view)

3

/4" (19) DOOR PANEL

1

/4"

(6)

1

/8" (3)

HINGE AT 145°

OPENING

(DOOR OPENS PAST 145°)

subzero.com | 99

Sub-Zero Residential Limited Warranty

FOR RESIDENTIAL USE

FULL TWO YEAR WARRANTY*

For two years from the date of original installation, this Sub-Zero product warranty covers all parts and labor to repair or replace, under normal residential use, any part of the product that proves to be defective in materials or workmanship. All service provided by Sub-Zero under the above warranty must be performed by Sub-Zero Factory Certied Service, unless otherwise specied by Sub-Zero, Inc. Service will be provided during normal business hours.

FULL FIVE YEAR SEALED SYSTEM WARRANTY

For ve years from the date of original installation, this Sub-Zero product warranty covers all parts and labor to repair or replace, under normal residential use, these parts that prove to be defective in materials or workmanship: compressor, condenser, evaporator, drier and all connecting tubing. All service provided by Sub-Zero under the above warranty must be performed by Sub-Zero Factory Certied Service, unless otherwise specied by Sub-Zero, Inc. Service will be provided during normal business hours.

LIMITED TWELVE YEAR SEALED SYSTEM WARRANTY

For twelve years from the date of original installation, Sub-Zero will repair or replace the following parts that prove to be defective in materials or workmanship: compressor, condenser, evaporator, drier and all connecting tubing. If the owner uses Sub-Zero Factory Certied Service, the service provider will repair or replace these parts with the owner paying for all other costs, including labor. If the owner uses non-certied service, the owner must contact Sub-Zero, Inc. (using the information below) to receive repaired or replacement parts. Sub-Zero will not reimburse the owner for parts purchased from non-certied service or other sources.

TERMS APPLICABLE TO EACH WARRANTY

The warranty applies only to products installed for normal residential use. The warranty applies only to products installed in any one of the fty states of the United States, the District of Columbia or the ten provinces of Canada. This warranty does not cover any parts or labor to correct any defect caused by negligence, accident or improper use, maintenance, installation, service or repair.

THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES THAT SUB-ZERO, INC. WILL PROVIDE, EITHER UNDER THIS WARRANTY OR UNDER ANY WARRANTY ARISING BY OPERATION OF LAW. SUB-ZERO, INC. WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM THE BREACH OF THIS WARRANTY OR ANY OTHER WARRANTY, WHETHER EXPRESS, IMPLIED OR STATUTORY.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specic legal rights and you may also have other legal rights that vary from state to state.

To receive parts and/or service and the name of Sub-Zero Factory Certied Service nearest you, contact Sub-Zero, Inc., P.O. Box 44848, Madison, WI 53744; check the Support & Service section of our website, subzero.com, email us at customerservice@subzero.com or call 800-222-7820.

*Stainless steel (doors, panels, handles, product frames and interior surfaces) are covered by a limited 60-day parts and labor warranty for cosmetic defects.

*Replacement water lters and air purication cartridges are not covered by the product warranty.

Sub Zero BI36RSPHLH, IT36CIIDLH, BI36FSPHLH, BI36FSTHLH, BI36ROLH Design Guide

Specifications and Main Features

Frequently Asked Questions

User Manual