Sub-Zero BI30USTH Design manual

Download

Page 1

BUILT-IN DESIGN GUIDE

Page 2

Contents

Built-In Design Options 4

Model Specifications 6

Planning Information 9

Framed Panels 12

Overlay Panels 18

Flush Inset Panels 22

Dispenser Specifications 28

Side Panels 29

Dual Installations 30

Accessories 37

Full-Scale Templates 38

Sub-Zero Warranty 42

Features and specifications indicated herein and on our website are subject to change at any time without notice. Check our website, subzero.com, for the most up-to-date specifications.

SUB-ZERO®is a registered trademark of Sub-Zero, Inc.

Page 3

Built-In Refrigeration 3

ubzerotrade.com

Introducing New Built-In Refrigeration. B

eginning in Fall, 2008, you will have a new line of built-in refrigeration to offer your clients. We have re-engineered —exterior and interior—our built-in product line to offer you the best in design options, and your clients the best in food preservation. The 600 series as you understand it now will be gone and the new offering will take its place. We will have new panel sizes, model numbers and many new features. Review this design guide for general specification information and keep coming back to the trade section of our website, subzerotrade.com, for new information during the coming months.

Model Numbers. The cross-reference chart below

provides a listing of the new built-in model numbers and

Model Number Key

MODEL BI- 3 6 UG/ S / PH- R H

the existing 600 series model numbers they are replacing.

PRODUCT TYPE

New Built-In Model 600 Series

ALL REFRIG ERATOR / ALL FREEZER

BI-36R 601R BI-36RG 601RG BI-36F 601F

OVER-AND -UNDER

BI-30U 611 BI-30UG 611G BI-36U 650 BI-36UG 650G

SIDE-BY-SIDE

BI-36S 661 BI-42S 642 BI-42SD 685 BI-48S 632 BI-48SD 695

EXAMPLES

BI-30UG/O-RH 611G/O-RH BI-48SD/F 695/F

WIDTH

STYLE

FEATURE

DESIGN

HANDLE

DOOR SWING

PRODUCT TYPE

Built-In Refrigeration BI

WIDTH

30" (762) 30 36" (914) 36 42" (1067) 42 48" (1219) 48

STYLE

All Refrigerator R All Freezer F Over-and-Under U Side-by-Side S

FEATURE

Glass Door G High Altitude Glass A Ice and Water Dispenser D

DESIGN

Framed /F Overlay or Flush Inset /O Classic Stainless Steel /S

HANDLE (classic s tain less steel models)

Tubular Handle /TH Curved Handle /CH Pro Handle /PH

DOOR SWING

Right-Hand Swing -RH Left-Hand Swing -LH

Page 4

Built-In Design Options 4

Built-In Design Options. A

flexibility for creating a beautiful kitchen. New lower profile hinges enable the new built-in units to merge more seamlessly with surrounding cabinetry. Three handle options coordinate with Wolf cooking products.

design classic is now even better. Four distinct design approaches provide limitless

Framed. Custom cabinetry

panels slide into the framed door to blend into the kitchen design. The framed design comes with a standard louvered grille and extruded handles.

Overlay. Custom cabinet

overlay panels can be combined with unique hardware for design flexibility. Shown with curved handle option to compliment Wolf E Series ovens.

Page 5

Built-In Design Options 5

ubzerotrade.com

Flush Inset. This brand new

design option allows for a flush door and grille. Classic, platinum and carbon stainless steel panels are available as sales accessories. Shown with tubular handle option to mirror Wolf L Series ovens.

Stainless Steel. For a

professional look, classic stainless is standard and requires no customization. To compliment the look of Wolf ranges, choose the pro handle option shown here.

Page 6

Model Specifications 6

36"

(914)

36"

(914)

30"

(762)

30"

(762)

36"

(914)

36"

(914)

84"

(2134)

24"

(610)

36"

(914)

84"

(2134)

24"

(610)

All Refrigerator / All Freezer Models

IMPORTANT NOTE:

The heights of the All Refrigerator / All Freezer

odels have increased

M from 73" (1854) to 84" (2134).

Model BI-36R

ALL REFR IG ERATOR

Model BI-36RG

ALL REFR IG ERATOR GLASS DOO R

Model BI-36F

ALL FREE ZE R

SIDE VIEW

Over-and-Under Models

Model BI-30U Model BI-36UG

Model BI-30UG

WITH GLAS S DOOR

Model BI-36U

WITH GLAS S DOOR

SIDE VIEW

Page 7

Model Specifications 7

36"

(914)

42"

(1067)

48"

(1219)

42"

(1067)

84"

(2134)

24"

(610)

48"

(1219)

84"

(2134)

24"

(610)

ubzerotrade.com

Side-by-Side Models

Model BI-48S

Model BI-42SModel BI-36S

Model BI-48SD

WITH DISP ENSER

Model BI-42SD

WITH DISP ENSER

SIDE VIEW

Models are shown in the stainless steel design.

IMPORTANT NOTE: Throughout this guide, dimensions in parentheses are millimeters unless otherwise specified.

Page 8

Model Specifications 8

237/8"

(606)

BEHIND

FRAME

23/8"

(60)

23/8"

(60)

237/8"

(606)

BEHIND

FRAME

23/8"

(

60)

23/8"

(60)

237/8"

(606)

BEHIND

FRAME

Door Clearance

All Refrigerator / All Freezer Models Over-and-Under Models Side-by-Side Models

Door Clearance

ALL REFRIG ERATOR / ALL FREEZER AC

BI-36R, BI-36RG and BI-36F 371/4" (946) 17" (432)

OVER-AND -UNDER ABC

BI-30U and BI-30UG 311/4" (796) 235/8" (600) 141/2" (368) BI-36U and BI-36UG 371/4" (946) 235/8" (600) 17" (432)

SIDE-BY-SIDE ACD

BI-36S 221/4" (565) 101/4" (260) 81/2" (216) BI-42S and BI-42SD 261/4" (668) 121/2" (318) 83/4" (222) BI-48S and BI-48SD 30" (762) 14" (356) 93/4" (248)

Interior Capacity / Weight

Capacity / Weight RFW

BI-36R 23.3 (660) 420 (191)

BI-36RG 23.5 (665) 430 (195)

BI-36F 22.8 (646) 406 (184)

BI-30U 12.7 (361) 4.1 (116) 462 (210)

BI-30UG 12.9 (367) 4.1 (116) 476 (216)

BI-36U 15.9 (450) 5.2 (148) 515 (234)

BI-36UG 16.1 (447) 5.2 (142) 529 (240)

The doors of all built-in models open to a maximum of 110°. A 90° door stop is shipped with all units. For additional information, refer to the full-scale templates at the end of this guide. The handle depth reflects the tubular, curved and pro handles. For framed handle profile, refer to the full-scale template on page 38.

IMPORTANT NOTE: For flush inset applications, add

/2" (13)

to dimension (A).

Capacity / Weight RFW

BI-36S 12.2 (346) 8.0 (227) 538 (244)

BI-42S 16.0 (455) 8.0 (227) 582 (264)

BI-42SD 15.9 (452) 8.1 (230) 608 (276)

BI-48S 18.8 (532) 9.5 (269) 630 (286)

BI-48SD 18.7 (530) 9.6 (272) 656 (298)

Refrigerator (R) and freezer (F) interior capacities are listed in cubic feet and (liters). Shipping weights (W) are listed in pounds and (kilograms) and are based on stainless steel models.

Page 9

Planning Information 9

SIDE VIEW

24" (

610)

OPENING DEPTH

833/4"

(2127)

OPENING

HEIGHT

83" min

(2108)

(610)

OPENING

EPTH

FRONT VIEW

TOP VIEW

OPENING WIDTH

OUTLINE

F UNIT WITH

/4" (19) PANEL

ubzerotrade.com

Standard Installation Opening Dimensions

Framed, Overlay and Classic Stainless Steel Models

Opening Width A

BI-36R, BI-36RG and BI-36F 351/2" (902)

BI-30U and BI-30UG 291/2" (746)

BI-36U and BI-36UG 351/2" (902)

BI-36S 351/2" (902)

BI-42S and BI-42SD 411/2" (1054)

BI-48S and BI-48SD 471/2" (1206)

IMPORTANT NOTE: If two units are installed side by side, refer to pages 30–31 for dual standard installations.

Classic stainless steel models are ready to install out of the box.

Page 10

Planning Information 1

/2"

(

1918)

(178)

(

152)

RONT VIEW

Electrical Requirements. F

or all built-in models, the electrical supply should be located within the shaded area shown in the illustration. Follow the National Electrical Code and local codes and ordinances when installing the receptacle. A separate circuit, servicing only this appliance is required.

IMPORTANT NOTE: A ground fault circuit interrupter

(GFCI) is not recommended and may cause interruption of operation.

Electrical Requirements

Power Supply 115 V AC, 60 Hz

Circuit Breaker 15 amp

Receptacle 3-prong grounding-type

Location of electrical supply.

Page 11

Planning Information 1

/2"

(

13)

(

457)

(

152)

SHUT-OFF

VALVE

ATER LINE

18"

(457)

(152)

3" (76)

FRONT VIEW

TOP VIEW

ubzerotrade.com

Plumbing Requirements. A

ll built-in models with an automatic ice maker come with a microbiological water filtration system. The water supply line should be located within the shaded area shown in the illustration. The water supply line should be connected to the house supply with an easily accessible shut-off valve between the supply and the unit. Do not use self-piercing valves. A saddle valve kit (4200880) is available from your Sub-Zero dealer. The water line must not interfere with installation of the anti-tip brackets.

IMPORTANT NOTE: A reverse osmosis system can be

used provided there is constant water pressure of 30 psi (2.1 bar) to 100 psi (6.9 bar) supplied to the unit at all times. In this application, the microbiological water filtration system should be set to bypass mode by removing the water filter cartridge and inserting the bypass plug (7005018) available from your Sub-Zero dealer. Installation instructions packed with the unit will outline this procedure.

/4" OD copper line

Plumbing Requirements

Water Supply Line

Water Pressure 30–100 psi (2.1–6.9 bar)

Excess Water Line for Connection 36" (914)

Location of water supply.

Page 12

Framed Panels 1

Framed Panels. I

f you and your client have ordered a

framed model, you will be adding panels to give the unit

Framed

the traditional Sub-Zero look. The framed panel design option is available for all built-in framed models. For exact door panel dimensions for built-in framed models, refer to framed panel specifications on the following pages. Also refer to the full-scale templates at the end of this guide for additional panel and handle considerations.

The traditional framed models come with an elegant, smooth, full-length handle. Optional extended full-length handles that provide additional finger clearance for raised panels are available through your Sub-Zero dealer.

Custom cabinetry panels slide into the framed door to blend into the kitchen design. The framed design comes with a standard louvered grille and extruded handles.

Framed Panel Requirements

MAX WEIGHT PER PANEL

BI-36R, BI-36RG and BI-36F 75 lbs (34 kg) All Other Framed Models 50 lbs (23 kg)

MIN PANEL THICKNESS

All Framed Panels

/4" (6)

Page 13

Framed Panels 1

/4" (6)

PANEL

RIM

EVEAL

/4" (6) min

DOOR

MAIN FRAME

RIM

EVEAL

/4" (6) min

ROUT TO 1

/4" (

MAIN FRAME

ubzerotrade.com

Framed Panels. I

is less than of shim material to build the total thickness to the panel is thicker than

/4" (6), they must be backed up with a sheet

f the thickness of the custom panels

/4" (6). If

/4" (6), a routed edge must be provided around the panel to ensure a proper fit. Refer to the illustrations.

IMPORTANT NOTE: On all framed models, routing,

recessing or optional extended handles may be required on raised panels for finger clearance under the handle. Refer to the full-scale templates at the end of this guide.

IMPORTANT NOTE: On glass door models, the edges of

the window cut-out will need to be finished, as they will be exposed.

IMPORTANT NOTE: When installing two units in a side by

side application, refer to pages 30–31 for dual standard installations. Be aware that rough opening dimensions are different for this application.

Do not exceed the framed decorative panel dimensions. Exceeding dimensions could cause damage to the panels and the Sub-Zero unit.

Framed

Panels1/4" (6) thick or less. Panels thicker than1/4" (6).

Page 14

Framed Panels 1

A A

Framed Panel Specifications

Framed

BI-36R / BI-36F BI-36RG

Models BI-36R, BI-36RG and BI-36F

REFRIGER ATOR/ FRE EZER WH

BI-30U / BI-36U BI-30UG / BI-36UG

Models BI-30U and BI-30UG

REFRIGER ATOR WH

Door Panel 353/4" (908) 699/16" (1767)

BI-36RG WH

FREEZER WH

Window Cut-Out 253/8" (645) 541/16" (1373)

Cut-Out Location 53/16" (132) 105/16" (262)

BI-30UG WH

Models BI-36U and BI-36UG

REFRIGER ATOR WH

FREEZER WH

BI-36UG WH

Door Panel 293/4" (756) 4915/16" (1268)

Drawer Panel 293/4" (756) 1811/16" (475)

Window Cut-Out 191/2" (495) 399/16" (1005)

Cut-Out Location 53/16" (132)

Door Panel 353/4" (908) 4915/16" (1268)

Drawer Panel 353/4" (908) 1811/16" (475)

Window Cut-Out 251/2" (648) 399/16" (1005)

Cut-Out Location 53/16" (132)

Page 15

Framed Panels 1

ubzerotrade.com

Framed Panel Specifications

BI-36S / BI-42S / BI-48S BI-42SD / BI-48SD

Framed

Model BI-36S

REFRIGER ATOR WH

Models BI-48S and BI-48SD

REFRIGER ATOR WH

Door Panel 1913/16" (503) 699/16" (1767)

FREEZER WH

Door Panel 157/16" (392) 699/16" (1767)

BI-48SD WH

Models BI-42S and BI-42SD

REFRIGER ATOR WH

Door Panel 2413/16" (630) 699/16" (1767)

FREEZER WH

Door Panel 167/16" (418) 699/16" (1767)

BI-42SD WH

Dispenser Cut-Out 57/8" (149) 127/16" (316)

Cut-Out Location 17/8" (48) 283/4" (730)

For Models BI-42SD and BI-48SD, panel thickness in the dispenser area can range from

/8" (29). If the panel is thicker, you must rout out a minimum bezel.

Door Panel 281/2" (724) 699/16" (1767)

Door Panel 183/4" (418) 699/16" (1767)

Dispenser Cut-Out 57/8" (149) 127/16" (316)

Cut-Out Location 17/8" (48) 283/4" (730)

/4" (6) to a maximum of

/4" (6) flat landing area to accommodate the glasswell

Page 16

Framed Panels 1

Optional Panel Grille. A louvered grille, providing an

4" (2134) overall unit height, is standard on framed

Framed

applications. You may choose to use Sub-Zero’s optional panel grille for your application. The panel grilles can be used with all built-in models and are available for 83" (2108), 84" (2134) and 88" (2235) overall unit heights.

Grille panel dimensions listed are for a standard 84" (2134) overall height of the unit. For an 83" (2108) overall height, subtract 1" (25) from grille panel height dimensions. For an 88" (2235) overall height, add 4" (102) to height dimensions.

Optional Grille Panel WH

762)

30" (

36" (914) Models 353/4" (908) 8

42" (1067) Models 413/4" (1060) 815/16" (227)

48" (1219) Models 473/4" (1213) 815/16" (227)

Models 293/4" (

756)

815/16" (

/16" (227)

227)

Optional panel grille.

Grille Panel Requirements

MAX WEIGHT

Grille Panel 13 lbs (6 kg)

MIN PANEL THICKNESS

Grille Panel

/4" (6)

Page 17

Framed Panels 1

ubzerotrade.com

Partial Framed Option. I

f you choose not to use custom panels above and below the glasswell for dispenser Model BI-42SD or BI-48SD, a stainless steel insert panel is available as a sales accessory. This accessory kit includes partial framed molding and classic stainless steel panel to provide a spill-resistant finish above and below the glasswell on the refrigerator door only. The partial framed accessory kit (7004855) is available through your Sub-Zero dealer. Refer to panel dimensions for the partial framed option below.

IMPORTANT NOTE: When using raised panels with the

partial framed kit, a

/2" (13) trim reveal down to1/4" (6) thickness is necessary at the bezel for the panels to fit properly.

Optional Partial Framed Panels

MODEL BI-42SD WH

Refrigerator Panel 151/16" (383) 699/16" (1767) Freezer Panel 151/16" (383) 699/16" (1767)

MODEL BI-48SD WH

Refrigerator Panel 163/4" (425) 699/16" (1767) Freezer Panel 163/4" (425) 699/16" (1767)

Partial Framed Kit

Framed

BI-42SD / BI-48SD Partial Framed Option

Page 18

Overlay Panels 1

Overlay Panels. I

f you and your client have ordered an overlay model, you will be adding panels and handles to give the unit a more custom look. The overlay panel design option is available for all built-in overlay models. For exact door panel dimensions, refer to overlay panel specifications on the following pages.

IMPORTANT NOTE: Overlay models can be used in an

overlay or a flush inset application. Be aware that the application specified will affect panel sizes, rough opening dimensions and installation.

Overlay

The overlay design allows decorative panels to cover the door trim for a more seamless appearance that blends with the design of the room. The most common way to achieve this look is to work with three panels—the decorative overlay panel which is typically spacer panel and a

/4" (6) backer panel. Depending on

/4" (19), a .10" (3)

your cabinet manufacturer, this could also be one panel routed for different dimensions.

Regardless of the physical construction of the panels (three-panel assembly or routed panel), you will need to follow the overlay panel specifications on the following pages for exact sizing and panel placement to ensure a proper fit.

Custom cabinet overlay panels can be combined with unique hardware for design flexibility. Shown with curved handle option to compliment Wolf E Series ovens.

Overlay Panel Requirements

MAX WEIGHT PER PANEL

BI-36R, BI-36RG and BI-36F 75 lbs (34 kg) All Other Overlay Models 50 lbs (23 kg) Grille Panel 13 lbs (6 kg)

MIN PANEL THICKNESS

All Overlay Panels

/8" (16)

Page 19

Overlay Panels 1

/8"

(3)

OVERLAY PANEL

SPACER PANEL

BACKER PANEL

TRIM

/16" (8) min

/4" (6)

.10" (3)

OVERLAY

PANEL

SPACER

PANEL

BACKER

PANEL

/4"

(19)

typical

ubzerotrade.com

Overlay Panels. T

he illustrations provide a cross section view of the three-panel assembly showing placement of the trim and a rear view of the three-panel assembly with critical dimensions, standard for all built-in models.

Overlay grille panels for the panel grille match the design of the overlay door panels. Dimensions for the grille panel are listed in the overlay panel specifications on the following pages.

IMPORTANT NOTE: On glass door models, the edges of

the window cut-out will need to be finished, as they will be exposed.

IMPORTANT NOTE: When installing two units in a side by

side application, refer to pages 30–31 for dual standard installations. Be aware that rough opening dimensions are different for this application.

Do not exceed the overlay decorative panel dimensions. Exceeding dimensions could cause damage to the panels and the Sub-Zero unit.

Panel assembly cross section.

Panel assembly rear view.

Overlay

Page 20

Overlay Panels 2

A A

H H

Overlay Panel Specifications

Overlay

BI-36R / BI-36F BI-36RG BI-30U / BI-36U BI-30UG / BI-36UG

Models BI-36R, BI-36RG and BI-36F

REFRIGER ATOR/ FRE EZER WH

Models BI-36U and BI-36UG

REFRIGER ATOR WH

Overlay Panel 36" (914) 693/4" (1772) Spacer Panel 351/8" (892) 6815/16" (1751) Backer Panel 353/4" (908) 699/16" (1767)

GRILLE WH

FREEZER WH

Overlay Panel 36" (914) 91/4" (235) Spacer Panel 351/8" (892) 85/16" (211) Backer Panel 353/4" (908) 815/16" (227)

BI-36RG WH

GRILLE WH

Window Cut-Out 251/2" (648) 541/8" (1375)

Cut-Out Location 51/4" (133) 103/8" (264)

BI-36UG WH

Models BI-30U and BI-30UG

REFRIGER ATOR WH

Overlay Panel 30" (762) 501/8" (1273) Spacer Panel 291/8" (740) 495/16" (1253) Backer Panel 293/4" (756) 4915/16" (1268)

FREEZER WH

Overlay Panel 30" (762) 19" (483) Spacer Panel 291/8" (740) 181/16" (459) Backer Panel 293/4" (756) 1811/16" (475)

GRILLE WH

Overlay Panel 30" (762) 91/4" (235) Spacer Panel 291/8" (740) 85/16" (211) Backer Panel 293/4" (756) 815/16" (227)

BI-30UG WH

Window Cut-Out 191/2" (495) 395/8" (1006)

Cut-Out Location 51/4" (133)

Overlay Panel 36" (914) 501/8" (1273) Spacer Panel 351/8" (892) 495/16" (1253) Backer Panel 353/4" (908) 4915/16" (1268)

Overlay Panel 36" (914) 19" (483) Spacer Panel 351/8" (892) 181/16" (459) Backer Panel 353/4" (908) 1811/16" (475)

Overlay Panel 36" (914) 91/4" (235) Spacer Panel 351/8" (892) 85/16" (211) Backer Panel 353/4" (908) 815/16" (227)

Window Cut-Out 251/2" (648) 395/8" (1006)

Cut-Out Location 51/4" (133)

Page 21

Overlay Panels 2

H H

ubzerotrade.com

Overlay Panel Specifications

BI-36S / BI-42S / BI-48S BI-42SD / BI-48SD

Overlay

Model BI-36S

REFRIGER ATOR WH

Models BI-48S and BI-48SD

REFRIGER ATOR WH

Overlay Panel 201/16" (510) 693/4" (1772) Spacer Panel 193/16" (487) 6815/16" (1751) Backer Panel 1913/16" (503) 699/16" (1767)

FREEZER WH

Overlay Panel 1511/16" (398) 693/4" (1772) Spacer Panel 1413/16" (376) 6815/16" (1751) Backer Panel 157/16" (392) 699/16" (1767)

GRILLE WH

Overlay Panel 36" (914) 91/4" (235) Spacer Panel 351/8" (892) 85/16" (211) Backer Panel 353/4" (908) 815/16" (227)

BI-48SD WH

Models BI-42S and BI-42SD

REFRIGER ATOR WH

Overlay Panel 251/16" (637) 693/4" (1772) Spacer Panel 243/16" (614) 6815/16" (1751) Backer Panel 2413/16" (630) 699/16" (1767)

FREEZER WH

Overlay Panel 1611/16" (424) 693/4" (1772) Spacer Panel 1513/16" (402) 6815/16" (1751) Backer Panel 167/16" (418) 699/16" (1767)

GRILLE WH

Overlay Panel 42" (1067) 91/4" (235)

Spacer Panel 411/8" (1045) 85/16" (211) Backer Panel 413/4" (1060) 815/16" (227)

BI-42SD WH

Dispenser Cut-Out 57/8" (149) 127/16" (316)

Cut-Out Location 2" (51) 2813/16" (732)

Overlay Panel 283/4" (730) 693/4" (1772) Spacer Panel 277/8" (708) 6815/16" (1751) Backer Panel 281/2" (724) 699/16" (1767)

Overlay Panel 19" (483) 693/4" (1772) Spacer Panel 181/8" (460) 6815/16" (1751) Backer Panel 183/4" (476) 699/16" (1767)

Overlay Panel 48" (1219) 91/4" (235) Spacer Panel 471/8" (1197) 85/16" (211) Backer Panel 473/4" (1213) 815/16" (227)

Dispenser Cut-Out 57/8" (149) 127/16" (316)

Cut-Out Location 2" (51) 2813/16" (732)

Page 22

Flush Inset Application 2

STANDARD INSTALLATION

24" (610)

OPENING

DEPTH

TOP VIEW

263/16"

(665)

FLUSH

INSET

DEPTH

23/16"

(56)

11/4"

(32)

TOP VIEWT

FLUSH INSET INSTALLATION

WITH

/4" (19) PANEL

24" (610)

OPENING

DEPTH

Flush Inset Application. I

t is necessary to consider the following points when planning for a flush inset application:

• The flush inset depth is 2

/16" (56) deeper than the

standard opening.

• The flush inset width is 2

/2" (64) wider than the

standard opening.

• The flush inset height is

/4" (6) higher than the

standard opening.

• Panel widths increase to achieve the flush inset look.

• You must allow a

/2" (13) reveal around the perimeter of the unit and grille to allow for proper door swing and airflow.

IMPORTANT NOTE: Do not confuse the flush inset appli-

cation as being a separate model. This is an overlay unit in a flush installation. The same model is used in an

Flush Inset

overlay or flush inset application.

Rough opening dimensions for the new flush inset application assume the use of a

/4" (19) decorative panel. The illustrations below show the difference between standard and flush inset installations.

This brand new design option allows for a flush door and grille. Classic, platinum and carbon stainless steel panels are available as sales accessories. Shown with tubular handle option to mirror Wolf L Series ovens.

Standard installation. Flush inset installation.

Page 23

Flush Inset Application 2

OUTLINE

OF UNIT WITH

/4" (19) PANEL

DETAIL A

DETAIL B

FRONT VIEW

WIDTH TO CLEAT

FLUSH INSET WIDTH

11/4"

(32)

11/4"

(32)

SIDE VIEW

84"

(2134)

FLUSH

INSET

HEIGHT

/4"

(6)

24" (610)

DEPTH TO CLEAT

263/16" (665)

FLUSH INSET DEPTH

23/16"

(56)

833/4"

(2127)

HEIGHT

TO CLEAT

83" min

(2108)

24" (610)

DEPTH

TO CLEAT

263/16"

(665) FLUSH I

NSET

DEPTH

TOP VIEW

23/16"

(

56)

11/4"

(32)

CLEAT

11/4"

(32)

24" (610)

PENING

DEPTH

O CLEAT

CLEAT

TOP VIEW

263/16"

(

665)

FLUSH

NSET

DEPTH

23/16" (

56)

3" (76)

typical

24" (610)

OPENING

DEPTH TO

CLEAT

11/4"

(32)

23/16"(56)

CLEAT

SHADED

AREA

UST BE

INISHED

3" typical

(76)

4" (102)

ubzerotrade.com

Flush Inset Installation Opening Dimensions

Detail A

Flush Inset Opening Widths AB

BI-36R, BI-36RG and BI-36F 351/2" (902) 38" (965)

BI-30U and BI-30UG 291/2" (746) 32" (813)

BI-36U and BI-36UG 351/2" (902) 38" (965)

BI-36S 351/2" (902) 38" (965)

BI-42S and BI-42SD 411/2" (1054) 44" (1118)

BI-48S and BI-48SD 471/2" (1206) 50" (1270)

Detail B

IMPORTANT NOTE: Dimensions assume a3/4" (19) panel

thickness.

IMPORTANT NOTE: If two units are installed side by side, refer to pages 32–33 for dual flush inset installations.

Flush Inset

Page 24

Flush Inset Panels 2

/4" (6)

.10" (3)

FLUSH INSET

PANEL

SPACER

PANEL

BACKER

PANEL

/4"

(19)

typical

Flush Inset Panels. T

decorative panels on the front of the unit to be flush with surrounding cabinetry and is available for all built-in overlay models. For exact panel dimensions, refer to flush

he flush inset application allows

o not exceed the flush inset decorative panel

D dimensions. Exceeding dimensions could cause damage to the panels and the Sub-Zero unit.

inset panel specifications on the following pages.

The flush inset design allows decorative panels to cover the door trim for a seamless appearance that blends with the design of the room. The most common way to achieve this look is to work with three panels—the decorative flush inset panel which is typically (3) spacer panel and a

/4" (6) backer panel. Depending

/4" (19), a .10"

on your cabinet manufacturer, this could also be one panel routed for different dimensions.

Flush Inset Panel Requirements

MAX WEIGHT PER PANEL

/8" (

34 kg) 23 kg)

16)

BI-36R, BI-36RG and BI-36F 75 lbs ( All Other Flush Inset Models 50 lbs ( Grille Panel 13 lbs (6 kg)

MIN PANEL THICKNESS

All Flush Inset Panels

Regardless of the physical construction of the panels (three-panel assembly or routed panel), you will need to follow the flush inset panel specifications on the following pages for exact sizing and panel placement to ensure a

Flush Inset

proper fit.

The illustration to the right provides a rear view of the three-panel assembly with critical dimensions, standard for all built-in models.

IMPORTANT NOTE: The inside edges of the rough open-

ing as well as the sides and a portion of the back side of the decorative panels will need to be finished, as they will be exposed when the doors are open.

IMPORTANT NOTE: On glass door models, the edges of

the window cut-out will need to be finished, as they will be exposed.

IMPORTANT NOTE: For flush inset panels thicker than

/4" (19), a 90˚ door stop may be needed to avoid interference with adjacent cabinets. Refer to the full-scale templates at the end of this guide.

IMPORTANT NOTE: When installing two units side by side

in a flush inset application, refer to pages 32–35 for dual flush inset installations. Be aware that rough opening dimensions, panel sizes and offsets are different for this application.

Three-panel assembly

Page 25

Flush Inset Panels 2

/8"

(16)

/16" (

8) 1

/2"

(13)

FLUSH INSET PANEL

SPACER

BACKER

DOOR / DRAWER / GRILLE

TOP VIEW

CABINETRY

/4" (6)

REVEAL

/16" (8)

/8" (

DOOR DOOR

TOP VIEWT

/2"(13)

/16"

(8)

/8"

(3)

CABINETRY

GRILLE

SIDE VIEW S

/2"(13)

/32"

(2)

/16"

(8)

/16"

(8)

/32"

(4)

GRILLE

DOOR

SIDE VIEW

/8"(16)

/32"

(4)

/16"

(8)

/16"

(8)

/32"

(2)

DOOR

DRAWER

SIDE VIEW SIDE VIEW

/16"

(8)

/32"

(2)

DOOR /

DRAWER

SIDE VIEW

subzerotrade.com

Flush Inset Panels. I

llustrations A–F provide panel offsets and reveals for all built-in models in a flush inset application. Refer to the chart below for reference to the illustrations relating to your specific model.

For additional information on model specific panel reveals, visit the Specification Library section of our website, subzerotrade.com.

Panel Offsets Illus.

ALL REFRIG ERATOR / ALL FREEZER

Door / Grille Sides A Grille Top C Grille Bottom / Door Top D Door Bottom F

OVER-AND -UNDER

Door / Drawer / Grille Sides A Grille Top C Grille Bottom / Door Top D Door Bottom / Drawer Top E Drawer Bottom F

SIDE-BY-SIDE

Doors (hinge) / Grille Sides A Doors (handle) Sides B Grille Top C Grille Bottom / Door Top D Door Bottom F

Illus. A Illus. B

Flush Inset

Illus. C Illus. D

Illus. E Illus. F

Page 26

Flush Inset Panels 2

A A

H H

Flush Inset Panel Specifications

BI-36R / BI-36F BI-36RG BI-30U / BI-36U BI-30UG / BI-36UG

Models BI-36R, BI-36RG and BI-36F

Flush Inset

REFRIGER ATOR/ FRE EZER WH

Flush Inset Panel 37" (940) 693/4" (1772) Spacer Panel 351/8" (892) 6815/16" (1751) Backer Panel 353/4" (908) 699/16" (1767)

GRILLE WH

Flush Inset Panel 37" (940) 91/4" (235) Spacer Panel 351/8" (892) 85/16" (211) Backer Panel 353/4" (908) 815/16" (227)

BI-36RG WH

Window Cut-Out 251/2" (648) 535/8" (1362)

Cut-Out Location 53/4" (146) 103/8" (264)

Models BI-36U and BI-36UG

REFRIGER ATOR WH

Flush Inset Panel 37" (940) 501/8" (1273) Spacer Panel 351/8" (892) 495/16" (1253) Backer Panel 353/4" (908) 4915/16" (1268)

FREEZER WH

Flush Inset Panel 37" (940) 19" (483) Spacer Panel 351/8" (892) 181/16" (459) Backer Panel 353/4" (908) 1811/16" (475)

GRILLE WH

Flush Inset Panel 37" (940) 91/4" (235) Spacer Panel 351/8" (892) 85/16" (211) Backer Panel 353/4" (908) 815/16" (227)

BI-36UG WH

Window Cut-Out 251/2" (648) 395/8" (1006)

Models BI-30U and BI-30UG

REFRIGER ATOR WH

Cut-Out Location 53/4" (146) 51/4" (133)

Flush Inset Panel 31" (787) 501/8" (1273) Spacer Panel 291/8" (740) 495/16" (1253) Backer Panel 293/4" (756) 4915/16" (1268)

FREEZER WH

Flush Inset Panel 31" (787) 19" (483) Spacer Panel 291/8" (740) 181/16" (459) Backer Panel 293/4" (756) 1811/16" (475)

GRILLE WH

Flush Inset Panel 31" (787) 91/4" (235) Spacer Panel 291/8" (740) 85/16" (211) Backer Panel 293/4" (756) 815/16" (227)

BI-30UG WH

Window Cut-Out 191/2" (495) 395/8" (1006)

Cut-Out Location 53/4" (146) 51/4" (133)

Page 27

Flush Inset Panels 2

H H

ubzerotrade.com

Flush Inset Panel Specifications

BI-36S / BI-42S / BI-48S BI-42SD / BI-48SD

Model BI-36S

REFRIGER ATOR WH

Models BI-48S and BI-48SD

REFRIGER ATOR WH

Flush Inset Panel 209/16" (522) 693/4" (1772) Spacer Panel 193/16" (487) 6815/16" (1751) Backer Panel 1913/16" (503) 699/16" (1767)

FREEZER WH

Flush Inset Panel 163/16" (411) 693/4" (1772) Spacer Panel 1413/16" (376) 6815/16" (1751) Backer Panel 157/16" (392) 699/16" (1767)

GRILLE WH

Flush Inset Panel 37" (940) 91/4" (235) Spacer Panel 351/8" (892) 85/16" (211) Backer Panel 353/4" (908) 815/16" (227)

DISPENSE R (BI-48SD) WH

Models BI-42S and BI-42SD

REFRIGER ATOR WH

Flush Inset Panel 259/16" (649) 693/4" (1772) Spacer Panel 243/16" (614) 6815/16" (1751) Backer Panel 2413/16" (630) 699/16" (1767)

FREEZER WH

Flush Inset Panel 173/16" (437) 693/4" (1772) Spacer Panel 1513/16" (402) 6815/16" (1751) Backer Panel 167/16" (418) 699/16" (1767)

GRILLE WH

Flush Inset Panel 43" (1092) 91/4" (235)

Spacer Panel 411/8" (1045) 85/16" (211) Backer Panel 413/4" (1060) 815/16" (227)

DISPENSE R (BI-42SD) WH

Dispenser Cut-Out 57/8" (149) 127/16" (316)

Cut-Out Location 2" (51) 2813/16" (732)

Flush Inset

Flush Inset Panel 291/4" (743) 693/4" (1772) Spacer Panel 277/8" (708) 6815/16" (1751) Backer Panel 281/2" (724) 699/16" (1767)

Flush Inset Panel 191/2" (495) 693/4" (1772) Spacer Panel 181/8" (460) 6815/16" (1751) Backer Panel 183/4" (476) 699/16" (1767)

Flush Inset Panel 49" (1245) 91/4" (235) Spacer Panel 471/8" (1197) 85/16" (211) Backer Panel 473/4" (1213) 815/16" (227)

Cut-Out 57/8" (149) 127/16" (316)

Cut-Out Location 2" (51) 2813/16" (732)

Page 28

Dispenser Specifications 2

(51)

Glasswell

Profile

Handle

Profile

(25)

65/16" (160)

/32"

(2)

/8" (

radius

/8"

(16)

127/8"

(327)

Dispenser Area. F

or Models BI-42SD and BI-48SD, the refrigerator door panel must include a cut-out to accommodate the dispenser glasswell and bezel. The thickness of the panel in this area can range from to a maximum of 1

/8" (29).

/4" (6)

IMPORTANT NOTE: Regardless of the thickness of the

panel for Model BI-42SD or BI-48SD, you must plan for a flat landing area for the decorative bezel surrounding the glasswell area. The illustration to the right provides exact bezel dimensions. Refer to the appropriate panel specifications page for exact cut-out location. This landing area can be accomplished in a number of different ways. These photos show two options.

One option (flush) is to rout the panel so the bezel will be flush with rails and stiles. You must rout a space to accommodate the height and width of the bezel. The width of the stile immediately to the left of the bezel must

be 1

/4" (44). Do not cut the entire stile to this dimension.

The other option (proud) shows a boxed out landing area for the bezel using stiles and rails to create this space. In this application, the bezel will sit proud of the stiles and rails. The total thickness of the panels at this level must not exceed 1

/8" (29).

Flush option.

Proud option.

For overlay and flush inset Models BI-42SD and BI-48SD, mounting placement of the refrigerator door handle must assure proper access to the glasswell and adequate clearance under the handle. The handle placement illustration shows the relation of the refrigerator door handle to the glasswell bezel on stainless steel models.

Handle placement.

Dispenser dimensions.

Page 29

MAIN

FRAME

SIDE PANEL

ROUTING

1" (25)

17/8" (48)

/8" (3)

/2" (13)

Side Panels 2

84"

(2134)

24" (

610)

ROUT TO

/16" (

(OVER-AND-UNDER

MODELS)

OPTIONAL

OE KICK

CUT-OUT

4" (102)

201/2"

(521)

53/4"

(

146)

17/8"(

48)

1" (

25)

41/4" (108)

ROUT TO

/8" (

FRONT

F SIDE

ANEL

25/8"

(67)

ubzerotrade.com

Side Panels. S

ide panels can be used with all framed, overlay, flush inset and stainless steel design applications. When planning for side panels with the installation of a built-in model, you need to be aware of the space configuration to achieve a pleasing fit. Depending on the exact panel you are using with your unit, the height of the panel may vary.

IMPORTANT NOTE: The use of side panels may change

the width of your rough opening.

When installing a built-in unit with a custom side panel, an accessory kit (7003407) is required. Classic stainless steel and white enamel side panels are also available through your Sub-Zero dealer.

The side panel will need to be a minimum of 24" (610) deep and

/2" (13) thick. Refer to the side panel dimensions illustration for additional specifications. Routing will be necessary in order for the side panel to fit flush against the side of the unit. Refer also to the routing detail illustration.

IMPORTANT NOTE: If you have a Model BI-30U, BI-30UG,

BI-36U or BI-36UG, extra routing will be necessary to avoid having the panel hit the refrigerator lower hinge plate.

Routing Detail.

Side panel dimensions.

Page 30

Dual Installations 3

WITHOUT FILLER STRIP

ILLER STRIP REQUIRED

FILLER STRIP REQUIRED

Dual Standard Installation

Dual Standard Installations. T

wo framed, overlay or stainless steel units may be placed side by side in a dual installation. Some dual standard installations will require a dual installation kit, available through your Sub-Zero dealer. If you are installing two units side by side in a flush inset application refer to page 33.

A custom filler strip can be used in between two units in a framed, overlay or stainless steel design application. It is recommended that the filler strip be at least 2" (51) wide, to prevent condensation between the units. Be sure to add the filler strip width to your rough opening width. Refer to the full-scale template on page 41.

Dual installations without a filler strip can only be accomplished using two units with opposite hinges as shown in illustration A below. The dual installations shown in illustrations B and C require a filler strip.

IMPORTANT NOTE: For the application shown in illustra-

tion A, a dual installation accessory kit is required. Refer to page 36 for information on dual installation accessory kits.

Dual Installations

Dual Installation Panel Requirements

MAX WEIGHT PER PANEL

BI-36R, BI-36RG and BI-36F 75 lbs (34 kg) All Other Models 50 lbs (23 kg) Dual Wide Grille Panel 26 lbs (12 kg)

MIN PANEL THICKNESS

Framed Panels Overlay and Flush Inset Panels

/4" (6)

/8" (16)

Illus. A

Illus. B Illus. C

Page 31

Dual Installations 3

24" (610)

OPENING

DEPTH

FRONT VIEWSIDE VIEW

TOP VIEW

833/4"

(2127)

OPENING

HEIGHT

83" min

(2108)

OPENING WIDTH

24" (610)

OPENING DEPTH

OUTLINE

OF TWO UNITS WITH

/4" (

19)

PANEL

subzerotrade.com

Dual Standard Installation Opening Dimensions

Framed, Overlay and Classic Stainless Steel Models

Opening Widths A

Two 30" (762) Models 593/4" (1518)

Two 36" (914) Models 713/4" (1822)

IMPORTANT NOTE: A dual installation kit will be required for this installation.

Classic stainless steel models are ready to install out of the box.

Dual Installations

Page 32

Dual Installations 3

WITHOUT FILLER STRIP

FILLER STRIP REQUIRED FILLER STRIP REQ

FILLER STRIP REQUIRED

Dual Flush Inset Installation

Dual Flush Inset Installation. I

nstalling two built-in models side by side in a flush inset application will require adjustments to the dimensions of your finished rough opening, panel sizes and panel offsets. It will also require a dual installation kit, available through your Sub-Zero dealer.

IMPORTANT NOTE: The application shown in illustration A

can only be achieved by installing dual flush inset panels. Failure to install dual flush inset panels will cause the handle side of the panels to collide when closing. In this application a dual installation accessory kit is also required.

Dual flush inset panels and dual installation kits are available through your Sub-Zero dealer. Refer to pages 34–35 for dual flush inset panel specifications and page 36 for information on dual installation accessory kits.

Dual Installation Panel Requirements

Dual Installations

MAX WEIGHT PER PANEL

BI-36R, BI-36RG and BI-36F 75 lbs (34 kg) All Other Models 50 lbs (23 kg) Dual Wide Grille Panel 26 lbs (12 kg)

MIN PANEL THICKNESS

Flush Inset Panels

/8" (16)

Illus. A

Illus. B Illus. C

Page 33

Dual Installations 3

(

610)

DEPTH

TO CLEAT

263/16"

(665)

FLUSH

NSET

EPTH

FRONT VIEW

TOP VIEW

23/16"

(

56)

WIDTH TO CLEAT

FLUSH INSET WIDTH

11/4"

(32)

11/4"

(32)

SIDE VIEW

84"

(2134)

FLUSH

INSET

HEIGHT

/4"

(

24" (610)

EPTH TO CLEAT

263/16" (

665)

FLUSH INSET DEPTH

23/16"

(56)

833/4"

(2127)

HEIGHT

TO CLEAT

83" min

(2108)

CLEAT

UTLINE OF

WO UNITS WITH

/4" (19) PANEL

ETAIL A

DETAIL B

11/4"

(32)

CLEAT

11/4"

(32)

24" (610)

PENING

DEPTH

O CLEAT

CLEAT

TOP VIEW

263/16"

(

665)

FLUSH

NSET

DEPTH

23/16" (

56)

3" (76)

typical

24" (610)

OPENING

DEPTH TO

CLEAT

11/4"

(32)

23/16"(56)

CLEAT

SHADED

AREA

UST BE

INISHED

3" typical

(76)

4" (102)

ubzerotrade.com

Dual Flush Inset Installation Opening Dimensions

Detail A

Opening Widths AB

Two 30" (762) Models 593/4" (1518) 621/4" (1581)

Two 36" (914) Models 713/4" (1822) 741/4" (1886)

Detail B

IMPORTANT NOTE: Dimensions assume a3/4" (19) panel

thickness. A dual installation kit will be required for this installation.

Dual Installations

Page 34

Dual Installations 3

/8"

(16)

/16" (

8) 1

/2"

(13)

FLUSH INSET PANEL

SPACER

BACKER

DOOR / DRAWER / GRILLE

TOP VIEW

CABINETRY

DUAL T

RIM

/4" (6)

REVEAL

/16" (8)

/8" (3)

DOOR DOOR

TOP VIEW

/2"(13)

/16"

(8)

/8"

(3)

CABINETRY

GRILLE

SIDE VIEW S

/2"(13)

/32"

(2)

/16"

(8)

/16"

(8)

/32"

(4)

GRILLE

DOOR

SIDE VIEW

/8"(16)

/32"

(4)

/16"

(8)

/16"

(8)

/32"

(2)

DOOR

DRAWER

SIDE VIEW SIDE VIEW

/16"

(8)

/32"

(2)

DOOR /

DRAWER

SIDE VIEW

Flush Inset Panels—Dual Installation. W

installing two built-in models side by side in a flush inset application, you must decrease the width of the decorative flush inset panels by panel offsets will also need to be made. These adjustments are needed to achieve a proper fit and to ensure the panels do not collide when closing. Panel dimensions in the chart below have been adjusted to reflect the decrease in panel dimensions.

IMPORTANT NOTE: If a filler strip is not used, dual instal-

lations can only be accomplished using two units with opposite hinges.

Illustrations A–F provide panel offsets and reveals for all built-in models in a flush inset application. Refer to the chart below for reference to the illustrations relating to your specific model. All reveals are wise specified.

For additional information on model specific panel reveals, visit the Specification Library section of our website, subzerotrade.com.

/2" (13). Adjustments to the

/2" (13) unless other-

hen

Illus. A Illus. B

Panel Offsets Illus.

ALL REFRIG ERATOR / ALL FREEZER

Doors (hinge) / Grille Sides A

Dual Installations

Doors (handle) Sides B Grille Top C Grille Bottom / Door Top D Door Bottom F

OVER-AND -UNDER

Doors (hinge) / Drawer / Grille Sides A Doors (handle) Sides B Grille Top C Grille Bottom / Door Top D Door Bottom / Drawer Top E Drawer Bottom F

Do not exceed the flush inset decorative panel dimensions. Exceeding dimensions could cause damage to the panels and the Sub-Zero unit.

Illus. C Illus. D

Illus. E Illus. F

Page 35

Dual Installations 3

A A

H H

ubzerotrade.com

Flush Inset Panel Specifications—Dual Installation

BI-36R / BI-36F BI-36RG BI-30U / BI-36U BI-30UG / BI-36UG

Models BI-36R, BI-36RG and BI-36F

REFRIGER ATOR/ FRE EZER WH

Models BI-36U and BI-36UG

REFRIGER ATOR WH

Flush Inset Panel 361/2" (927) 693/4" (1772) Spacer Panel 351/8" (892) 6815/16" (1751) Backer Panel 353/4" (908) 699/16" (1767)

GRILLE WH

FREEZER WH

Flush Inset Panel 361/2" (927) 91/4" (235) Spacer Panel 351/8" (892) 85/16" (211) Backer Panel 353/4" (908) 815/16" (227)

BI-36RG WH

GRILLE WH

Window Cut-Out 25" (635) 535/8" (1362)

Cut-Out Location 53/4" (146) 103/8" (264)

BI-36UG WH

Models BI-30U and BI-30UG

REFRIGER ATOR WH

Flush Inset Panel 301/2" (775) 501/8" (1273) Spacer Panel 291/8" (740) 495/16" (1253) Backer Panel 293/4" (756) 4915/16" (1268)

FREEZER WH

Flush Inset Panel 301/2" (775) 19" (483) Spacer Panel 291/8" (740) 181/16" (459) Backer Panel 293/4" (756) 1811/16" (475)

GRILLE WH

Flush Inset Panel 301/2" (775) 91/4" (235) Spacer Panel 291/8" (740) 85/16" (211) Backer Panel 293/4" (756) 815/16" (227)

BI-30UG WH

Window Cut-Out 19" (483) 395/8" (1006)

For dual wide grilles, refer to page 36.

Cut-Out Location 53/4" (146) 51/4" (133)

Flush Inset Panel 361/2" (927) 501/8" (1273) Spacer Panel 351/8" (892) 495/16" (1253) Backer Panel 353/4" (908) 4915/16" (1268)

Flush Inset Panel 361/2" (927) 19" (483) Spacer Panel 351/8" (892) 181/16" (459) Backer Panel 353/4" (908) 1811/16" (475)

Flush Inset Panel 361/2" (927) 91/4" (235) Spacer Panel 351/8" (892) 85/16" (211) Backer Panel 353/4" (908) 815/16" (227)

Window Cut-Out 25" (635) 395/8" (1006)

Cut-Out Location 53/4" (146) 51/4" (133)

Dual Installations

Page 36

Dual Installations 3

Dual Installation Kit with Dual Wide Grille.

This kit will replace the existing grilles that ship with the units and span the entire width of both units. The kit includes a installation of the dual wide grille), heater, dual kickplate and mounting hardware. Dual wide grilles are available for all built-in models and design applications. The overlay dual installation kit with grille will accept overlay and dual

/4" (6) center trim strip (required for proper

Dual Installation Kit. T

who choose to utilize the individual grilles that ship with each unit. The kit includes a the reveal between the units and grilles), heater and mounting hardware. This dual installation kit is not required if a custom filler strip is used. The filler strip should be a minimum of 2" (51) wide. Refer to the full-

scale template on page 41 for more information. flush inset panels. For dual wide grille panel dimensions, refer to the panel specifications below for your design application. Grille panel dimensions listed are for a standard 84" (2134) overall height of the unit.

Dual Wide Grille—Overlay Panels

Two 30" (762) Models

DUAL WIDE GRILLE WH

Overlay Panel 601/4" (1530) 91/4" (235) Spacer Panel 593/8" (1508) 85/16" (211) Backer Panel 60" (1524) 815/16" (227)

Two 36" (914) Models

DUAL WIDE GRILLE WH

Dual Wide Grille—Flush Inset Panels

his kit is available for those

/4" (6) filler strip (which fills

Overlay Panel 721/4" (1835) 91/4" (235) Spacer Panel 713/8" (1813) 85/16" (211) Backer Panel 72" (1829) 815/16" (227)

Two 30" (762) Models

Dual Installations

DUAL WIDE GRILLE WH

Flush Inset Panel 611/4" (1556) 91/4" (235) Spacer Panel 593/8" (1508) 85/16" (211) Backer Panel 60" (1524) 815/16" (227)

Two 36" (914) Models

DUAL WIDE GRILLE WH

Flush Inset Panel 731/4" (1861) 91/4" (235) Spacer Panel 713/8" (1813) 85/16" (211) Backer Panel 72" (1829) 815/16" (227)

Page 37

Built-In Accessories 3

ubzerotrade.com

Accessories. T

hese optional accessories are available for built-in models. Be aware that some accessories can not be used with every model. Accessories are available through your Sub-Zero dealer. To obtain local dealer information, visit the Showroom Locator section of our website, subzero.com.

• Front panels for framed design in white and classic

stainless steel—not available for glass door models.

• Front panels for flush inset application in classic,

platinum and carbon stainless steel with tubular, curved and pro handles.

• Louvered, panel and stainless steel grilles for 83"

(2108) and 88" (2235) overall heights. Built-in models come standard with a grille for an 84" (2134) overall height of the unit.

• Side panels in white and classic stainless steel.

• Custom side panel mounting kit.

• Extended framed handles for framed models with

Standard Handle Lengths

ALL REFRIG ERATOR / ALL FREEZER / S IDE-BY-SIDE MODELS

Tubular Handle 637/8" (1622) Pro Handle 451/8" (1146) Curved Handle 575/8" (1464) Stud Spacing 437/8" (

BI-30U and BI-30U G DOOR DRAWER

Tubular Handle 441/4" ( Pro Handle 371/2" ( Curved Handle 453/16" ( Stud Spacing 361/4" (

BI-36U and BI-36U G DOOR DRAWER

Tubular Handle 441/4" (1124) 305/16" (770) Pro Handle 371/2" (952) 231/2" (597) Curved Handle 453/16" (1148) 311/4" (796) Stud Spacing 361/4" (921) 225/16" (567)

1124)

952)

1148)

921)

1114)

245/16" (

21" (

251/4" (

165/16" (

raised panels.

• Decorative stainless steel handles available in tubular,

curved and pro styles in a variety of lengths. For standard handle lengths, refer to the chart.

633)

533)

641)

414)

• Retrofit kits for use with 600 series panels. Allows for

existing 600 series panels to be used on a new built-in model—not available for Models BI-36R, BI-36RG, BI-36F, BI-30UG, BI-36UG, BI-42SD and BI-48SD.

• Dual installation kit for use when placing units side by

side. Kits available with or without the dual wide grille assembly.

• Partial framed kit for dispenser Models BI-42SD and

BI-48SD. Includes a stainless steel trim piece to be used above and below the dispenser.

Page 38

Panel Thickness and Handle Profile 3

OPTIONAL EXTENDED FULL-LENGTH HANDLE

TANDARD

FULL-LENGTH HANDLE

/4" (6)

FRAMED PANEL

OOR

(25)

(76)

11/4" (32) PANEL

1" (

25) PANEL

/2" (13) PANEL

/4" (19) PANEL

(51)

/4" (6) BACKER PANEL

DOOR

DEPTH OF TUBULAR, CURVED AND PRO HANDLES

(25)

(76)

11/4" (32) PANEL

1" (25) PANEL

/4" (19) PANEL

(51)

.10" (3) SPACER PANEL

Framed. The top full-scale

template shows handle placement and panel thickness for framed applications.

Full-Scale Templates

The bottom full-scale template shows handle placement and panel thickness for overlay and flush inset applications.

IMPORTANT NOTE: Panel thickness does not include the backer panel and .10" (3) spacer panel.

IMPORTANT NOTE: The panel must be a minimum of thick to support mounting the handle hardware.

Mount door handles close to the opening edge of the door for ease of opening.

Overlay and Flush Inset.

/4" (6)

/8" (16)

Page 39

AIN FRAME

237/8" (

606)

O REAR OF UNIT

OVERLAY PANEL

/4" (19) THICK

(TYPICAL)

APPROX THICKNESS

OF WRAPPED STAINLESS

STEEL DOOR

DOOR CLOSED

DOOR OPEN 90˚

SUB-ZERO UNIT

4"(6)

OVERALL WIDTH

OF UNIT

TOP VIEW

)

(32

)

(19

)

(25

)

Overlay Panel Application—90° Door Opening 39

ubzerotrade.com

This full-scale template shows what considerations you need to make for overlay panel applications and how they may interact with adjacent cabinets and countertops.

Full-Scale Templates

Page 40

DOOR OPEN 110˚

SUB-ZERO UNITCABINETRY

FLUSH INSET PANEL

/4" (19) THICK

(TYPICAL)

(6)

PA N

)

(19

)

(25

)

PA N

11/4" (32)

ASSUMES

/4" (19)

FLUSH INSET

ANEL

HICKNESS

23/16" (56)

24" (

610)

O BACK WALL

AIN FRAME

TOP VIEW

Flush Inset Panel Application—110° Door Opening 4

This full-scale template shows what considerations you need to make for flush

nset panel applications and

i how they may interact with adjacent cabinets and countertops.

IMPORTANT NOTE: For flush inset panels thicker

/4" (19), a 90˚ door

than stop may be needed to avoid interference with adjacent cabinets.

Full-Scale Templates

Page 41

TOP VIEW

OPTIONAL

FRAMED EXTENDED

FULL-LENGTH HANDLE

STANDARD

FRAMED

FULL-LENGTH

HANDLE

DOOR CLOSED

DOOR OPEN 110˚

FILLER STRIP

AIN FRAME

LLOW FOR FILLER LAP

EHIND FLANGE

APPROX PROFILE OF

STAINLESS STEE WRAPPED

DOOR AND HANDLE

UB-ZERO UNITSUB-ZERO UNIT

OVERLAY PANEL

/4" (19) THICK

(TYPICAL)

(6)

PA N

(

)

(

)

(

)

(

)

2" (

51)

APPROX THICKNESS OF

WRAPPED STAINLESS

STEEL DOOR

Panel and Handle Profile—110° Door Opening 4

ubzerotrade.com

This full-scale template shows the panel and handle profile for a dual installation with a 2" (51) filler strip at 110˚ door opening.

Interference of door panels with handles at maximum door opening may require the use of an optional 90˚ door stop available through your Sub-Zero dealer.

Full-Scale Templates

Page 42

Sub-Zero Products Limited Warranty

ESIDENTIAL USE ONLY

FULL FIVE YEAR SEALED SYSTEM WARRANTY

LIMITED SIXTH THROUGH TWELFTH YEAR WARRANTY ON THE SEALED SYSTEM

FULL TWO YEAR WARRANTY ON TOTAL PRODUCT*

FULL FIVE YEAR SEALED SYSTEM WARRANTY

For five years from the date of original installation, your Sub-Zero warranty covers all parts and labor to repair or replace any components that prove to be defective in materials or workmanship in the sealed system. The sealed s

ystem consists of the compressor, condenser, evaporator, drier and all connecting tubing.

FULL TWO YEAR WARRANTY*

For two years from the date of original installation, your Sub-Zero warranty covers all parts and labor to repair or r

eplace any part of the product, that proves to be defective in materials or workmanship.

LIMITED SIXTH THROUGH TWELFTH YEAR SEALED SYSTEM WARRANTY

From the 6th through the 12th year from the date of original installation, your Sub-Zero warranty covers all parts that prove to be defective in materials or workmanship in the sealed system (parts only). The sealed system consists of the compressor, condenser, evaporator, drier and all connecting tubing.

TERMS APPLICABLE TO EACH WARRANTY

All service provided by Sub-Zero under the above warranty must be performed by an authorized Sub-Zero service center, unless otherwise specified by Sub-Zero. Service will be provided in the home during the normal business hours. This warranty applies only to products installed for normal residential use. Details regarding a non-residential warranty are available upon request.

The warranty applies only to products installed in any one of the fifty states of the United States, the District of Columbia or the ten provinces of Canada. This warranty does not cover any parts or labor to correct any defect caused by negligence, accident or improper use, maintenance, installation, service or repair, including but not limited to improper removal and reinstallation (whether in the unit or at a remote location) of the condensing unit.

THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY O NES THAT SUB-ZERO WILL PROVIDE, EITHER UNDER THESE WARRANTIES OR UNDER ANY WARRANTY ARISING BY OPERATION OF LAW. SUB-ZERO WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM THE BREACH OF THESE WARRANTIES OR ANY OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other legal rights, which vary from state to state.

To receive parts and/or service and the name of the Sub-Zero authorized service center nearest you, contact your Sub-Zero dealer, distributor or the Sub-Zero Customer Service Department, P. O. Box 44130, Madison Wisconsin, 53744-4130; check the Contact & Suppor t section of our website, subzero.com, or call 800-222-7820.

*Stainless Steel (classic, platinum and carbon) doors, panels, product frames and stainless interior surfaces are covered by a limited 60 day parts and labor warranty for cosmetic defects.

*Replacement water filter and air purification cartridges are not covered by the product warranty.

Page 43

©Sub-Zero, Inc. all rights reserved. The information and images in this guide are the copyright property of Sub-Zero, Inc. Neither this guide nor any information or images contained herein may be copied or used in whole or in part without the express written permission of Sub-Zero, Inc.

Page 44

Sub-Zero, Inc.

PO Box 44130 Madison, WI 53744-4130

800.222.7820 subzero.com

7005065 REV-D 10/2008