Sub Zero 7030434, 7030433 Installation

3757200 / Rev B / October, 2009

315SS (15'' & 18'')

Front Panel Kit Installation Instructions

Page 1 of 1

15''

PANEL

SHOWN

Handle-Side Bracket

INSIDE

DOOR

ASSEMBLY

Bottom Door Bracket

PROCEDURE: (Refer to the illustration below)

1. Remove handle-side bracket from face of door.

2. Secure handle-side bracket to door panel assembly using eight screws, provided.

3. Remove bottom door bracket from door and replace with bottom door bracket provided. Then, secure with
four screws.

4. Engage four tabs of handle-side bracket into pockets in the face of door.

5. Secure panel to door with two screws at upper door bracket, four screws at bottom door bracket.

6. Check for proper alignment and make ajustments if necessary.

CONTAINS: QTY DESCRIPTION

1 Door Panel Assy (size will vary)
1 Bracket, Panel SS
1 Bracket, Upr Drawer
2 Bolt, #10-24x1-1/2 Rd Hd

QTY

DESCRIPTION

1 Kit, Carbon Finish Care (not included in all Kits)

16 Screws, #8-32x1/2 Truss HD

2 Washer, Star 3/16''
1 Instructions

Upper Door Bracket