Sub Zero 7008911, 7008908, 7008902, 7008896, 7008893 Installation

...
Metal Front Panels
7004566 / Rev A / February, 2008
Page 1 of 4
CONT
AINS:
QTY
DESCRIPTION 1 Panel 1 Bag of Front Panel Clips 1 Instruction Sheet
FRONT P
ANEL
CLIP INSTALLATION PROCEDURE:
Insert the clips into the rectangular holes in the rear flanges of the front panel as shown in Figure 1, making sure the 1/4” (6 mm) wide part of the clips is facing toward the outer edge of the panel as this will slide under the door trim.
PANEL
(REAR VIEW)
PANEL CLIP
PANEL CLIP
Figure 1. Front Panel Clip Installation
NOTE: The clip installation is the same regardless of the panel.
(Over/under Refrigerator door panel shown)
1
2
3
DOOR
HANDLE-SIDE TRIM
SCREWS
SCREW COVER
METAL FRONT
PANEL
Figure 4. Door Metal Front Panel Installation
Metal Front Panels
7004566 / Rev A / February, 2008
Page 2 of 4
DOOR HANDLE-SIDE TRIM REMOVAL PROCEDURE:
1. At the top of the door, insert a flat blade screwdriver into the channel of the screw cover and push the cover away form the handle-side trim so that it disengages from the handle-side trim (See Figure 2).
2. With a T-20, 6-lobe Torx type bit, extract the handle-side mounting screws and pull the trim from the door (See Figure 3).
Figure 2. Screw Cover Removal
Figure 3. Handle-Side Trim Removal
DOOR
SCREW COVER
HANDLE-SIDE TRIM
HANDLE-SIDE TRIM
DOOR PANEL INSTALLATION PROCEDURE (See Figure 4):
1. Install the door front panel onto the door so that the panel clips slide under the door trim and the front panel slides in over the door trim.
22. Reattach the handle-side trim.
3. Reinstall the screw cover.
+ 2 hidden pages