Sub Zero 7012363, 7007576 Installation

7012363

UC15I 18'' Filler Panel Kit Installation Instructions

7014983 / Rev A / November, 2009

CONT

AINS:

QTY

DESCRIPTION

1 Kickplate, Filler RH
1 Kickplate, Filler LH
1 Kickplate, Stainless

Page 1 of 1

Kickplate Filler

Panel

QTY DESCRIPTION

6' Foam, Dbl Coated Acrylic 3M4932

1 Panel, Extension 18''
1 Instructions

Figure 1. UC15I Filler Panel Installation

Extension

Panel

INSTALLATION PROCEDURE

(Refer to Figure 1):

1. Determine door swing of unit (the filler panels will be postioned on the handle side of unit).

2. Remove backing paper from the double stick tape.

3. Position kickplate filler panel even with bottom of icemaker and flush with lower cabinet face, then use even
pressure to adhere kickplate filler panel to side of unit.

4. Position extension panel even with the top of icemaker and flush with upper cabinet face, then use even
pressure to adhere extension panel to side of unit.

5. Install kickplate/grille.