Sub Zero 7011215 Installation

7011215

WS-30 Lock Installation Kit

7011220 / Rev B / February, 2010

CONTAINS: QTY DESCRIPTION

1 Lock, Door (w/ #10 Screw, Nut and 2 Keys)
1 Housing, Door Lock
1 Cover, Door Lock
2 Screws, #10-24 x 1/2'' Socket Head Cap
2 Screws, #10-24 x 1/2'' Tamper Proof
1 Door Lock Bracket
2 Screws, 5/16-18 x 3/4'' Tamper Proof
1 3/16 Hex Key
1 Cam, Door Lock - Black (WS-30)
1 Instructions

INST

ALLATION PROCEDURE:

1. Extract two 5/16-18 bolts from handle side of the
bottom cabinet hinge holes and discard them.

2. Using the two 5/16-18 x 3/4” tamper proof screws,
secure the catch plate to the bottom cabinet hinge
holes on the handle side of the unit (See Figure

1).

NOTE: There will be one unused hole in the
catch plate.

3. Extract two existing #10-24 cap screws from the
bottom of the door and use them to fasten the
lock assembly and housing to the bottom of the
door through the same holes in which the cap
screws were removed (See Figure 1).

NOTE: Stainless doors will have four screws in
the door. Extract four and discard two.

4. Install the cam onto the lock using the #10 screw
so that a clockwise rotation will lock the door (See
Figure 1).

5. Check the lock for proper operation.

6. Slide the lock cover into position and secure it
using two #10-24 x 1/2” tamper proof screws (See
Figure 1).

WS-30 Lock Assembly and Housing

Page 1 of 1

Catch Plate

5/16-

18x3/4

Tamper

Proof

Screws

#10 Screw

Cam

Lock Cover

Housing

Lock Nut

#10-24x1/2 Tamper Proof

#10-24 Cap Screws

Door Lock

Key

Figure 1. Attaching Catch Plate and Assembly

Attach catch

plate to bottom

of cabinet.

Attach lock

housing to

bottom of

door.

#10-24x1/2 tamper proof

screws hold the lock cover

to the lock housing

Door

Gasket

Cabinet