Sub-Zero 700TR Quick Reference Guide

Integrated refrigeration can be used anywhere in the home. It merges seamlessly into the décor, with no visible hinges or grilles. Model 700TR is a 27" wide tall unit with refrigerator storage in the upper cabinet, and also in the lower drawers with a crisper cover standard in the upper drawer.Two distinct temperature zones ensure the freshest food and energy efficiency.

Model 700TR

Integrated All Refrigerator

Features

Integrated design blends invisibly into custom cabinetry

Dual refrigeration system

Microprocessor offers precise temperature control

Electronic digital controls

Flat-to-the-ceiling bright interior lighting

Adjustable, spill-proof glass shelves and adjustable door shelves

Refrigerator deli drawer for storage of smaller items

Removable, clear-view crisper cover can be used in either drawer

Door alarm

Exclusive dual-action hinge with built-in 90˚ door stop

Meets strict Department of Energy requirements

With the installation of a harness kit, this appliance is certified by Star-K to meet strict religious regulations in conjunction with specific instructions found on www.star-k.org.

Accessories

Stainless steel door and drawer panels with tubular handles available in three finishes (see chart above for specifics)

Polished chrome handles for custom panel applications

Crisper cover with lid

Dozen egg container with lid

Dual installation heater kit

Accessories are available through your Sub-Zero dealer. To obtain local dealer information, visit the Showroom Locator section of our website, subzero.com.

Interior Features

Refrigerator

Dual Refrigeration 2 Temperature Zones 3 Adjustable Glass Shelves 1 Stationary Shelf 2 Storage Drawers Removable Crisper Cover 2 Removable Drawer Dividers Adjustable Deli Drawer 3 Adjustable Door Shelves Adjustable Dairy Compartment Egg Container

Classic CarbonPlatinum

Model 700TR

Design Integrated

Stainless Steel Panels Classic Platinum Carbon

80" Finished Height

84" Finished Height

Installation Notes

Stainless steel panels with handles are available as accessories. Panels for an 80" finished height are offered in classic, platinum and carbon finishes. Panels for an 84" finished height come in the classic finish only. These panels are not installed at the factory.

Complete installation specifications, including panel sizes, can be found on our website, subzero.com.

Unit dimensions may vary by ±1/8".

Specifications

Overall Width 27"

Overall Height 80"

Overall Depth 24"

Door Clearance 251/2"

Drawer Clearance 191/2"

Refrigerator Capacity 15.5 cu ft

Opening Width 27"

Opening Height 80"

Opening Depth 25"*

Electrical Requirements 115 V AC, 60 Hz

15 amp dedicated circuit

Annual Energy Usage $39**

Shipping Weight 360 lbs

*Depth is 24" from the front of the unit to its back. Your design may necessitate moving the unit back, or cabinets forward to achieve a flush fit. This will require a minimum opening depth of 25".

**Based on 9.06 cents per kilowatt hour.

ANTI-TIP

BRACKET*

*PLACEMENT OF THE

ANTI-TIP BRACKET

SHOULD BE 24" (610)

FROM THE FRONT OF THE

UNIT WITHOUT PANELS

TO THE BACK OF THE

ANTI-TIP BRACKET.

25"

(635)

27"

(686)

25"

(635)

11/2"

(38)

131/2"

(343)

TOP VIEW

SIDE VIEW FRONT VIEW

ANTI-TIP

BRACKET

80"

(2032)

41/2"

(114)

21/2" (64)

151/2" (394)

/4"

(6)

13" (330)

ANTI-TIP

BRACKET

LOCATE ELECTRICAL WITHIN

SHADED AREA – ORIENT GROUND

PRONG TO RIGHT AS SHOWN

NOTE: ANTI-TIP BRACKET MUST BE INSTALLED TO

PREVENT UNIT FROM TIPPING FORWARD

Installation Specifications

Overall Dimensions

Model 700TR

Integrated All Refrigerator

105˚

90˚

90˚ DOOR OPENING

DOOR/ DRAWER

CLOSED

MAXIMUM DOOR OPENING

DOOR/ DRAWER PANEL THICKNESS NOT INCLUDED – DIMENSION WILL VARY WITH INSTALLATION

DOOR/ DRAWER

CLOSED

191/2"*

(495)25

/2"*

(648)

24"

(610)

257/8" (657)

45/8"*(117)

TOP VIEW

Dimensions in parentheses are in millimeters unless otherwise specified.

27"

(686)

(UNIT DIMENSION) (UNIT DIMENSION)

14"(356)

DOOR

MOUNTING

DETAIL

24"

TOP OF ROUGH

OPENING

/16"

(21)

80"*

(2032)

(610)

/8"

(10)

/2"

(13)

203/8"

(518)

131/4"

(337)

101/4"

(260)

DRAWER

MOUNTING DETAIL

341/2"*

(876)

FRONT VIEW SIDE VIEW

/2"

(13)

ADJUSTMENT IN LEVELING LEGS

789/16"*

(1995)

93/4"

(248)

(102)