Sub-Zero 700BF Quick Reference Guide

Integrated refrigeration can be used
anywhere in the home. It merges
seamlessly into the décor, with no visible
hinges or grilles. Model 700BF(I) is a 27"
wide base unit with freezer storage in
both drawers. Model 700BFI features an
automatic ice maker.

Model 700BF(I)

Integrated Freezer Drawers

Features

Integrated design blends invisibly into
custom cabinetry

Microprocessor offers precise temperature
control

Electronic digital controls

Flat-to-the-ceiling bright interior lighting

Open drawer alarm

Automatic ice maker (Model 700BFI)

Meets strict Department of Energy
requirements

This appliance is certified by Star-K
to meet strict religious regulations in
conjunction with specific instructions
found on www.star-k.org.

Model Options 700BF 700BFI

Design Integrated Integrated

Automatic Ice Maker

Accessories

Stainless steel drawer panels with
tubular handles available in three finishes
(see chart above for specifics)

Polished chrome handles for custom
panel applications

Dual installation heater kit

Accessories are available through your Sub-Zero
dealer. To obtain local dealer information, visit the
Locator section of our website, subzero.com.

Interior Features

Freezer

1 Temperature Zone
2 Storage Drawers
2 Removable Drawer Dividers (700BF)
1 Removable Drawer Divider (700BFI)
Automatic Defrost
Automatic Ice Maker (700BFI)

Classic CarbonPlatinum

Stainless Steel Panels Classic Platinum Carbon

Model 700BF(I)

Installation Notes

Stainless steel drawer front panels with
handles are available as accessories. These
panels are not installed at the factory.

Complete installation specifications, including
panel sizes, can be found on our website,
subzero.com.

Unit dimensions may vary by ±1/8".

Specifications

Overall Width 27"

Overall Height 341/2"

Overall Depth 24"

Drawer Clearance 191/2"

Freezer Capacity 5.1 cu ft

Opening Width 27"

Opening Height 341/2"

Opening Depth 25"*

Electrical Requirements 115 V AC, 60 Hz

15 amp dedicated circuit

Plumbing Requirements

1

/4" OD copper line

(Model 700BFI) 20–100 psi

Annual Energy Usage $45**

Shipping Weight 190 lbs

*Depth is 24" from the front of the unit to its back.
Your design may necessitate moving the unit
back, or cabinets forward to achieve a flush fit.
This will require a minimum opening depth of 25".

**Based on 9.06 cents per kilowatt hour.

Installation Specifications

Overall Dimensions

Model 700BF(I)

Integrated Freezer Drawers

Dimensions in parentheses are in
millimeters unless otherwise specified.

Models without an ice maker
will not require the water line
connection.

27"

(686)

(UNIT DIMENSION) (UNIT DIMENSION)

DRAWER

MOUNTING DETAIL

FRONT VIEW SIDE VIEW

+

_

ADJUSTMENT IN LEVELING LEGS

1

/2"

(13)

203/8"

3
(10)

(518)

/8"

131/4"

(337)

101/4"

(260)

*

1

/2"

(13)

*PLACEMENT OF THE

ANTI-TIP BRACKET

SHOULD BE 24" (610)

FROM THE FRONT OF THE

UNIT WITHOUT PANELS

TO THE BACK OF THE

ANTI-TIP BRACKET.

NOTE: ANTI-TIP BRACKET MUST BE INSTALLED TO

PREVENT UNIT FROM TIPPING FORWARD

LOCATE ELECTRICAL WITHIN

SHADED AREA – ORIENT GROUND

PRONG TO RIGHT AS SHOWN

ANTI-TIP

BRACKET

41/2"

(114)

1

/4"

(6)

21/2" (64)

13" (330) 9"

151/2" (394)

LOCATE WATER LINE
(REAR ENTRY) WITHIN

SHADED AREA

(229)

341/2"*

(876)

25"

(635)

3
(19)

93/4"

(248)

11/2"

(38)

/4"

24"

(610)

191/2"*

4"

(102)

TOP VIEW TOP VIEW

9"

(229)

6"

(152)

27"

(686)

11/2"

(38)

341/2"

(876)

(76)

3"

BRACKET*

ANTI-TIP

131/2"

(343)

151/2"

(394)

WATER LINE

BOTTOM ENTRY

LOCATION

27"

(686)

24"

(610)

DRAWER CLOSED

(495)

257/8" (657)

TOP VIEW

DRAWER PANEL THICKNESS NOT INCLUDED

*

ANTI-TIP

BRACKET

131/2"

(343)

SIDE VIEW FRONT VIEW

WATER LINE

SIDE ENTRY

LOCATIONS

25"

(635)

ANTI-TIP

BRACKET

27"

(686)

11/2"

(38)

WATER LINE

SIDE ENTRY

LOCATION