Sub-Zero 611G-PS User Manual

Planning Information

Built-In Model 611G

Over-and-Under Refrigerator / Freezer with Glass Door

odel 611G/F

M
F

ramed

Model 611G/O
Overlay

Front venting allows

nit to be completely

u

uilt in

b

ighted electronic

L

ontrol panel

c

Adjustable spill-proof

lass shelves

g

gg container

E

High humidity

risper drawer

c

Automatic ice maker

Two-tier wire
storage baskets

Hermetically sealed

efrigeration units

r

Door closers

erial and model

S
number plate

riple-pane

T

V resistant low-

U

nergy glass door

e

Four-sided
magnetic gaskets

Removable kickplate

Model 611G/S (P/B)
Stainless Steel

The Sub-Zero Model 611G over-and­under refrigerator/freezer with glass door
is available in your choice of the framed,
overlay or stainless steel design application.
Three stainless steel finishes are offered—
classic (/S), platinum (/P) and carbon (/B).

Full-extension roll-out
freezer drawer

(Stainless steel design shown )

With the installation of a harness kit, these
appliances are Star-K compliant to meet strict
religious regulations in conjunction with specific
instructions f
this harness kit thr

o obtain local dealer inf

T
section of our website, subzero.com.

ound on star-k.org. You may purchase

our Sub-Zero dealer.

ough y

ormation, visit the Locator

Many people are gravitating toward a commercial

looking kitchen but they lac

k the refriger
allows them to achieve that look. The Model 611G with
a glass door along with its cousin, the Model 650G, are
the only over-and-under refrigerator/freezer models on
the market that allow you to do that for your clients
and they are manufactured by Sub-Zero. Need we say
more?

ation unit that

Dimensions in parentheses are in
millimeters unless otherwise specified.

11/06

1

30"

(762)

24"

(610)

84"

(2134)

301/8"

(765)

30"

(762)

291/4"

(743)

237/8"

(606)

BEHIND

FRAME

3

/8" (10)

FRAME

EXTENSION

Planning Information

Built-In Model 611G

FEATURES

30" (762) over-and-under refrigerator/freezer
with glass door

Framed, overlay and stainless steel applica­tions provide complete design flexibility

Sub-Zero's dual refrigeration system ensures
the freshest food and energy efficiency

Shallow-depth design means access is easy
to any area of the refrigerator

Electronic digital controls are up front and
easy to use

Bright interior lighting

Adjustable, spill-proof glass shelves in the
refrigerator

High-humidity crisper drawer is large and
deep with removable divider and smooth
sides for easy cleaning

Full-extension freezer drawer

Door alarm will let you know with an audible
beeping if your refrigerator door or freezer
drawer are left ajar

Automatic ice maker provides an ample
supply of crescent-shaped ice

Triple-pane UV-resistant low-energy glass
door improves insulation

Solid core door and drawer with magnetic
g

askets and door/drawer closers

Front venting allows unit to be completely
built in and serviced from the front

Meets strict Department of Energy require­ments

pproved for US and Canada

UL a

Two, five and twelve year residential
warranty – exclusions apply; warranty
information can be found on our website,
subzer

o.com

OVERALL DIMENSIONS

Stainless steel design shown.

1

±

y

ary b

Dimensions ma

Dimensions in parentheses are in
millimeters unless otherwise specified.

y v

/8" (3).

2

Planning Information

Built-In Model 611G

MODEL OPTIONS

Framed Design 611G/F

Overlay Design 611G/O

Classic Stainless Steel 611G/S

Platinum Stainless Steel 611G/P

Carbon Stainless Steel 611G/B

ou must allow 90 days from order to

Y
delivery for platinum and carbon finishes.

SPECIFICATIONS

M

odel 611G Over-and-Under Refrigerator/Freezer

w

ith Glass Door

Overall Width 30" (762)

Overall Height 84" (2134)

Overall Depth 24" (610)

Refrigerator Capacity 12.9 cu ft (365 L)

F

reezer Capacity 3.9 cu ft (110 L)

Minimum Height (levelers in) 83" (2108)

Door Swing Clearance 301/8" (765)

Electrical Requirements

Plumbing Requirements

115 V AC, 60 Hz, 15 amp circuit

1

/4" copper line

Water Supply 20–100 psi

A CCESSORIES

Louvered, panel or stainless steel
grilles in 1" (25) increments from
10" (254) to 15" (381) high

Grille panels for framed design
in white, almond and classic
stainless steel

Side panels in white, almond and
classic stainless steel

Stainless steel and polished
chrome handles for overlay design

Roll-out deli basket

Dozen egg container with lid

Accessories are av
Sub-Zero dealer. To obtain local dealer
information, visit the Locator section of
our website, subzero.com.

ailable through your

Annual Energy Usage 544 kWh / $ 50
(based on 9.06 cents per kilowatt hour)

Shipping Weight Framed – 471 lbs (214 kg)

Overlay – 471 lbs (214 kg)

Stainless Steel – 476 lbs (216 kg)

Special Note Model 611G has a triple-pane,

UV-resistant, low-energy glass door

Specifications are subject to change without notice.

Dimensions in parentheses are in
millimeters unless otherwise specified.

3

Planning Information

833/4"

(2127)

ROUGH

OPENING

HEIGHT

WITH

STANDARD

11" (279)

GRILLE

751/2"

(1918)

7

"

(178)

6"

(

152)

291/2"

(749)

ROUGH OPENING WIDTH

24"

(

610)

R

OUGH

O

PENING

D

EPTH

E

3"

(76)

18"

(457)

W

LOCATE WATER SUPPLY

WITHIN SHADED AREA

L

OCATE ELECTRICAL

W

ITHIN SHADED AREA

6"

(152)

S

HUT-OFF

V

ALVE

EXTEND WATER LINE

A

PPROX. 36" (914)

F

ROM BACK WALL

FRONT VIEW

TOP VIEW

Built-In Model 611G

INSTALLATION SPECIFICATIONS

DIMENSIONS

Finished Rough Opening Width 291/2" (749)

Finished Rough Opening Height 833/4" (2127)

Finished Rough Opening Depth 24" (610)

Location of Electrical Within upper shaded area

Location of W

See Installation Instructions shipped with unit for detailed specifications.
Refer to the Sub-Zero Design Guide pdf file for additional specifications.

Dimensions in parentheses are in
millimeters unless otherwise specified.

ater Supply

Within lower shaded area

4

Planning Information

Built-In Model 611G

INSTALLATION NOTES

R

efer to the illustrations and specifications
for overall dimensions, finished rough opening
dimensions and installation specifics.

A

llow the door to open a minimum of 90˚ or
you'll have problems removing drawers. With
the door opening at 90˚, you may have to move
drawers slightly to clear the door interior. Refer
to the minimum door swing clearance in the
specifications chart.

For corner installations, allow for a minimum
3" (76) filler so that the door can open to 90˚.
If you're using raised panels, consider using a
wider filler.

Be sure to add the filler strip width to your
finished rough opening dimension. In any side­by-side installation without a filler strip, add an
additional
This will allow for the proper width.

Refer to the full-scale illustrations at the end
of this section for specifics on door openings
and filler size alternatives.

If your client has chosen the stainless steel
design, the unit will be shipped complete with
wrapped stainless steel doors and handle
hardware. You will not have to install front
panels.

If your client has chosen the framed or
overlay design, you will be adding front panels
to give the unit the custom Sub-Zero look. The
overlay design also allows you to add your own
handles, or you may choose accessory handles
available through your Sub-Zero dealer. Refer to
pages 6– 11 for detailed information on adding
panels.

The refrigerator door panel must include a
cut-out to accommodate the window. Refer to
the panel specifications for exact dimensions.
The glass portion of the door must be exposed
and not covered b

F
maker, rough in the water supply line. Connect

1

/4" OD copper line to the house supply

a
sure to use an easily accessible shut off valve
between the supply and the unit.

Do not use self-piercing valves. A saddle
valve kit (4200880) is available from your
Sub-Zero dealer. To obtain local dealer informa­tion, visit the Locator section of our website,
subzer

1

/2" (13) to your combined numbers.

y any part of the panel.

or Built-In models with an automatic ice

, being

o.com.

A

line filter is required when water condi­tions have a high sediment content. The ice
maker operates on water pressure of 20 psi
(1.4 bar) to 100 psi (6.9 bar). In some cases a
r

everse osmosis water filter system may not be
able to maintain the minimum water pressure
consistently.

The water line should be routed up through

1

the floor within

/2" (13) from the back wall and
no higher than 3" (76) off the floor. If you have
to come through the wall, make sure the water
line is no more than 3" (76) from the floor.
Locate water supply within the shaded area
shown in the installation illustration.

Regardless of the routing, allow 3' (.9 m) of
excess copper tubing to remain outside the wall
or floor for easy connection to the unit.

A 115 volt, 60 Hz, 15 amp electrical supply
is required. The supply circuit for this appliance
must be protected by a 15 amp fuse or circuit
breaker. It is recommended that a separ

ate

circuit, serving only this appliance, be provided.

All Built-In models are equipped with a 6'
(1.8 m) power supply cord with a 3

-prong
grounding plug which must be plugged into a
mating 3

-prong grounding type wall receptacle.
Locate electrical within the shaded area shown
in the installation illustration.

You must follow all National Electrical Code
regulations. In addition, be aware of local codes
and ordinances when installing your service.

To prevent the unit from tipping forward and
provide a stable installation, the unit must be
secured in place with an anti-tip blocking kit. If
there is a solid soffit a

bove the unit with clear

­ance between the unit and the soffit of 1" (25)
or less, you won't need to block the unit.

For installations with clearances of more
than 1" (25),
anti-tip bloc

you must block the unit with the

king kit (wood bloc

k and hardw

are)

provided with each Built-In unit.

Refer to the

Built-In Installation Instructions
packed with the appliance, which provides
step-b

y-step pr

ocedures for making sure the

unit is installed properly.

Dimensions in parentheses are in
millimeters unless otherwise specified.

5