Sub-Zero 601R-PS User Manual

Planning Information

Built-In Model 601R

All Refrigerator

odel 601R/F

M

ramed

F

Model 601R/O
Overlay

Lighted electronic
control panel

Adjustable spill-proof

lass shelves

g

djustable roll-out

A
utility basket

gg container

E

High humidity
compartment

Hermetically sealed
refrigeration units

Removable kickplate

Serial and model
number plate

Front venting allows unit
to be completely built in

(Stainless steel design shown )

djustable dairy

A

ompartment

c

djustable door

A

helves

s

our-sided

F
magnetic gaskets

Door closers

Model 601R/S (P/B)
Stainless Steel

The Sub-Zero Model 601R all
refrigerator is available in your choice of the
framed, overlay or stainless steel design
application. Three stainless steel finishes
are offered— classic (/S), platinum (/P) and
carbon (/B).

Dimensions in parentheses are in
millimeters unless otherwise specified.

11/06

With the installation of a harness kit, these
appliances are Star-K compliant to meet strict
religious regulations in conjunction with specific
instructions found on star-k.org. You may purchase
this harness kit through your Sub-Zero dealer.
To obtain local dealer information, visit the Locator
section of our website, subzero.com.

The Model 601R is one of the largest all refrigerator

models that Sub-Zer
Model 601F

, all freezer

o offer

(1.8 m) of refrigeration space. But if you confine your
thinking to this alone, you are seeing half the picture.
Think about using this unit with a Model 700BF,
the two-drawer base freezer (see the Integrated
Refrigeration section). This unit is the first building
piece in solving clients’ issues.

s. When coupled with the

, it offers the consumer 6'

1

36"

(914)

24"

(610)

73"

(1854)

36"

(914)

361/16"

(916)

351/4"

(895)

237/8"

(606)

BEHIND

FRAME

3

/8" (10)

FRAME

EXTENSION

Planning Information

Built-In Model 601R

FEATURES

36" (914) wide all refrigerator

E

nergy Star qualified

Sub-Zero's refrigeration system ensures the

freshest food and energy efficiency

Shallow-depth design means access is easy

to any area of the refrigerator

Electronic digital controls are up front and

easy to use

Bright interior lighting

Adjustable, spill-proof glass shelves

High-humidity crisper drawer is large and
deep with removable divider and smooth
sides for easy cleaning

Door alarm will let you know with an audible
beeping if your refrigerator door is left ajar

Front venting allows unit to be completely
built in and serviced from the front

UL approved for US and Canada

Two, five and twelve year residential
warranty – exclusions apply; warranty
information can be found on our website,
subzero.com

OVERALL DIMENSIONS

Stainless steel design shown.

1

±

y

ary b

Dimensions ma

Dimensions in parentheses are in
millimeters unless otherwise specified.

y v

/8" (3).

2

Planning Information

Built-In Model 601R

SPECIFICATIONS

M

odel 601R All Refrigerator

Overall Width 36" (914)

Overall Height 73" (1854)

MODEL OPTIONS

Framed Design 601R/F

Overlay Design 601R/O

Classic Stainless Steel 601R/S

Platinum Stainless Steel 601R/P

Carbon Stainless Steel 601R/B

ou must allow 90 days from order to

Y
delivery for platinum and carbon finishes.

A CCESSORIES

Front panels for framed design

in white, almond and classic

stainless steel

Side panels in white, almond and

classic stainless steel

Extended framed handle

Stainless steel and polished

chrome handles for overlay design

Gallon door shelf

Dozen egg container with lid

90˚ and 105˚ door stop kits

Accessories are available through your
Sub-Zero dealer. To obtain local dealer
information, visit the Locator section of
our website, subzero.com.

Overall Depth 24" (610)

Refrigerator Capacity 19.9 cu ft (564 L)

M

inimum Height (levelers in) 72

3

/4"

(1848)

Door Swing Clearance 361/16" (916)

Electrical Requirements 115 V AC, 60 Hz, 15 amp circuit

Annual Energy Usage 399 kWh / $ 37
(based on 9.06 cents per kilow

att hour)

Energy Star Qualified

Shipping Weight Framed – 391 lbs (177 kg)

Overlay – 391 lbs (177 kg)

Stainless Steel – 420 lbs (191 kg)

Special Note Model 601R can also be ordered with

a glass door as Model 601RG

Specifications are subject to change without notice.

Dimensions in parentheses are in
millimeters unless otherwise specified.

3

Planning Information

723/4"

(1848)

ROUGH

OPENING

HEIGHT

351/2"

(

902)

R

OUGH OPENING WIDTH

24"

(610)

ROUGH

OPENING

D

EPTH

11"

(279)

24"

(610)

LOCATE ELECTRICAL

WITHIN SHADED AREA

6"

(152)

E

FRONT VIEW

TOP VIEW

Built-In Model 601R

INSTALLATION SPECIFICATIONS

DIMENSIONS

Finished Rough Opening Width 351/2" (902)

Finished Rough Opening Height 723/4" (1848)

Finished Rough Opening Depth 24" (610)

Location of Electrical Within shaded area

See Installation Instructions shipped with unit for detailed specifications.
Refer to the Sub-Zero Design Guide pdf file for additional specifications.

Dimensions in parentheses are in
millimeters unless otherwise specified.

4

Planning Information

Built-In Model 601R

INSTALLATION NOTES

R

efer to the illustrations and specifications
for overall dimensions, finished rough opening
dimensions and installation specifics.

A

llow the door to open a minimum of 90˚ or
you'll have problems removing drawers. With
the door opening at 90˚, you may have to move
drawers slightly to clear the door interior. Refer
to the minimum door swing clearance in the
specifications chart.

For corner installations, allow for a minimum
3" (76) filler so that the door can open to 90˚.
If you're using raised panels, consider using a
wider filler. A 90˚ door stop is available as an
accessory.

When units are installed side by side, a filler
strip is recommended. The width of this filler
strip will vary depending on the configuration
and panels you use. An anchoring kit may also
be used to attach two units together. This kit is
available through your Sub-Zero dealer.

Be sure to add the filler strip width to your
finished rough opening dimension. In any side­by-side installation without a filler strip, add an
additional
This will allow for the proper width.

Refer to the full-scale illustrations at the end
of this section for specifics on door openings
and filler size alternatives.

If your client has chosen the stainless steel
design, the unit will be shipped complete with
wrapped stainless steel doors and handle
hardware. You will not have to install front
panels.

1

/2" (13) to y

our combined number

s.

I

f your client has chosen the framed or
overlay design, you will be adding front panels
to give the unit the custom Sub-Zero look. The
overlay design also allows you to add your own
h

andles, or you may choose accessory handles
available through your Sub-Zero dealer. Refer to
pages 6– 10 for detailed information on adding
panels.

A 115 volt, 60 Hz, 15 amp electrical supply
is required. The supply circuit for this appliance
must be protected by a 15 amp fuse or circuit
breaker. It is recommended that a separate
circuit, serving only this appliance, be provided.

All Built-In models are equipped with a 6'
(1.8 m) power supply cord with a 3-prong
grounding plug which must be plugged into a
mating 3

-prong grounding type wall receptacle.
Locate electrical within the shaded area shown
in the installation illustration.

You must follow all National Electrical Code
regulations. In addition, be aware of local codes
and ordinances when installing your service.

To prevent the unit from tipping forward and

ovide a sta

pr

ble installation, the unit must be
secured in place with an anti-tip blocking kit. If
there is a solid soffit a

bove the unit with clear­ance between the unit and the soffit of 1" (25)
or less, you won't need to block the unit.

For installations with clearances of more
than 1" (25), you must block the unit with the
anti-tip blocking kit (wood block and hardware)
provided with each Built-In unit.

Refer to the Built-In Installation Instructions
packed with the appliance, which provides
step-b

y-step pr

ocedures for making sure the

unit is installed properly.

Dimensions in parentheses are in
millimeters unless otherwise specified.

5

Planning Information

Built-In Model 601R

ADDING PANELS

In your plan for panels, be sure you are working with the
Sub-Zero panel design family called for in your design. If
you have chosen the stainless steel design, the unit will be
shipped complete with wrapped stainless steel doors and
h

andle hardware. You will not have to install front door

panels.

If you and your client have ordered a framed or overlay
design model, you will be adding panels to give the unit
the custom Sub-Zero look. Specifications on the following
pages provide installation considerations for framed and
overlay door panels.

Side panels can be used with the framed, overlay and
stainless steel design applications. Refer to specifications
on page 10.

Dimensions in parentheses are in
millimeters unless otherwise specified.

6

Planning Information

PANELS

1

/4" (6) THICK OR LESS

1

/4" (6) Panel

Trim reveal

1

/4" (6) min

PANELS THICKER THAN

1

/4" (6)

Trim reveal

1

/4" (6) min

Rout to 1/4" (6)

thickness

W

H

A

14" (356)

Built-In Model 601R

FRAMED PANELS

Framed door panel 1/4" (6) thick or less

FRAMED PANELS

If the thickness of the custom panels is less than 1/4"
(6), they must be backed up with a sheet of shim material
to build the total thickness to

1

than

/4" (6), an edge must be routed around the panel to

1

/4" (6). If the panel is thicker

ensure a proper fit. Refer to the illustrations on this page.

I

MPORTANT NOTE:Routing, recessing or optional

extended handles may be required on raised panels for
finger clearance under the handle. Refer to the full-scale
illustrations on pages 11–14.

IMPORTANT NOTE: The weight of each panel cannot
exceed 50 lbs (23 kg).

The traditional framed models come with an 11" (279)
louvered grille and elegant full-length handle. Optional
extended full-length handles that provide additional finger
clearance for raised panels are available through your
Sub-Zero dealer. To obtain local dealer information, visit
the Locator section of our website

, subzero.com.

Framed door panel thicker than 1/4" (6)

To install framed panels, refer to the installation instruc­tions shipped with each unit

. These instructions can also

be found on our website, subzero.com.

FRAMED PANEL DIMENSIONS

WIDTH HEIGHT

Door Panel 341/8" (867) 5815/16"(1497)

Handle Recess Location A – 2915/32" (749)

Maximum Panel Weight 50 lbs (23 kg)

Framed Door Panel

Dimensions in parentheses are in
millimeters unless otherwise specified.

7

Planning Information

Door/Drawer /

Grille Trim

1

/16" (2)

5

/32" (4)

1

/4" (6) Backer Panel

5

/16" (8) min

.

10"

(3)

Spacer Panel

Overlay Panel

Spacer Panel

Overlay Panel

1

/4" (6)

Backer

Panel

.10"

(3)

~3/4"

(19)

Built-In Model 601R

OVERLAY PANELS

OVERLAY PANELS

The overlay design allows decorative panels to cover the
door trim for a more seamless appearance that blends
with the design of the room. To achieve this look, the
most common way is to work with three panels—the
decorative overlay panel, a .10" (3) spacer panel and a

1

/4"
(6) backer panel. Depending on your cabinet manufacturer,
this could be one panel routed for different dimensions or
more likely, three different panels.

Regardless of the physical construction of the panels
(routing or three panel assembly), you will need to follow
the exact dimensions and panel placement to ensure a
proper fit.

The top illustration on this page is a cross section view of
the three panel assembly showing placement of the
door / drawer / grille trim. The bottom illustration shows a
rear view of the three panel assembly and critical dimen­sions, standard for all overlay models.

Three panel assembly— cross section

Three panel assembl

y— rear view

Overlay models will come with no handle hardware,
because the beauty of this design is that you can match
the surr

ounding cabinetry hardware. For overlay door panel

dimensions, refer to specifications on page 9.

IMPOR

TANT NOTE:

Keep in mind that the Sub-Zer

o door
panels have the potential for hitting adjacent cabinets
and/ or countertops when they are opened. You need to be

are of your surrounding cabinetry and space limitations

aw
when using the overlay models. Refer to the full-scale
illustrations on pages 13 –14.

IMPORTANT NOTE: The weight of each door panel
assembly cannot exceed 50 lbs (23 kg). The total thick­ness of all panels for an overlay model must be at least

5

/8" (16) thick.

To install overlay panels, refer to the installation instruc­tions shipped with each unit

. These instructions can also

be found on our website, subzero.com.

Do not exceed the dimensions listed for the overlay
grille panel. The decorative panel cannot be any larger
or it ma

y restrict the air flow to the compressor area

and cause problems with the operation of the unit.

Dimensions in parentheses are in
millimeters unless otherwise specified.

8

W

H

Planning Information

Built-In Model 601R

Overlay Door Panel

OVERLAY PANELS

OVERLAY PANEL DIMENSIONS

WIDTH HEIGHT

Door Panel 347/16" (875) 591/4" (1505)

Door Spacer 331/2" (851) 585/16" (1481)

5

Door Backer 341/8" (867) 58

1

/16"(1497)

Maximum Weight (panel assembly) 50 lbs (23 kg)

Dimensions in parentheses are in
millimeters unless otherwise specified.

9

Planning Information

4" (102)

3" (76)

237/8" (606)

BEHIND FRAME

Built-In Model 601R

SIDE PANELS

SIDE PANELS

Side panels can be used with the framed, overlay and
stainless steel design applications. When planning for side
panels with the installation of the Built-In model, you need
to be aware of space configuration to achieve a pleasing
fit. Depending on the exact panel you are using with your
unit, the height of the panel will vary.

Cut-outs around the toe kick and grille area are required if

1

a

/4" (6) thick panel will be inserted into the main frame
channel. The panel will need to be 24" (610) deep. Refer to
the illustration on this page for placement of toe kick and
grille area cut-outs. If a
panel will abut the main frame and should be 23

3

/8" (10) thick panel is used, the

7

/8" (606)
deep. The toe kick area may or may not be cut out
depending on the look you want to achieve.

IMPORTANT NOTE: The use of side panels may change
the width of your rough opening.

Cut-outs for grille and toe kic

k area

HARDWARE CONSIDERATIONS

Overlay models come without handle hardware. The
beauty of this design is that you can match the surround­ing cabinet hardware. You or the cabinet manufacturer
must provide handle hardware to match the overall
decorating scheme.

The handle hardware must be installed before installing
the panel assembly. Use larger D-style handles. If screws
with thick heads are used, the screws will need to be
countersunk into the door before the panel is put into

. Refer to the full-scale illustr

place

ations on pages 1

1–12.

IMPORTANT NOTE: Sub-Zero does not recommend using
single pull knobs on any of its Built-In models.

Optional stainless steel handles are available in a variety of
diameters and lengths in the classic, platinum and carbon
stainless steel finishes and polished chr

ome. Contact
your Sub-Zero dealer for specifics. To obtain local dealer
information, visit the Locator section of our website,
subzero.com.

Dimensions in parentheses are in
millimeters unless otherwise specified.

10

Planning Information

11/4"(

32) PANEL

1"(25) PANEL

1

/4"(6) P

ANEL

1

/2"(13) PANEL

3

/4"(19) PANEL

O

PTIONAL

EXTENDED

FULL-LENGTH

HANDLE

S

TANDARD

FULL-LENGTH

HANDLE

DOOR

1

/4"(

6)

FRAMED PANEL

1"

(25)

2"

(

51)

3"

(

76)

Built-In Model 601R

HANDLE PROFILE – FRAMED APPLICATION

FULL-SCALE TEMPLATES

The following full-scale illustrations enable you
to under

stand some of the unique situations
you may face as you design the Built-In units
into homes. These templates can be easily
photocopied or used in y

Dimensions in parentheses are in
millimeters unless otherwise specified.

our tr

acings.

HANDLE PROFILE

The full-scale illustration above shows handle
placement for the fr

amed a

pplication standard
full-length handle and the optional extended
full-length handle shown in the dashed line.

11

Planning Information

11/4" (32) PANEL

1" (25) PANEL

1

/4" (

6) PANEL

1

/2" (

13) PANEL

3

/4" (19) PANEL

5

/8" (16) PANEL

DOOR

1

/4" (

6)

APPROXIMATE THICKNESS OF WRAPPED STAINLESS STEEL DOOR

NOTE: FOR OVERLAY APPLICATIONS, OPTIONAL STAINLESS STEEL HANDLE

MUST BE MOUNTED ON PANEL MINIMUM 5/8" (16) THICK.

1"

2"

(

51)

3"

(

76)

S

TANDARD STAINLESS STEEL HANDLE

Built-In Model 601R

HANDLE PROFILE – STAINLESS STEEL / OVERLAY APPLICATIONS

PANEL AND HANDLE PROFILE

The full-scale illustr
placement for the standard stainless steel

ation a

bove shows handle

handle on the wrapped stainless steel door and
on overla
dashed line

y panel applications shown in the

.

IMPORTANT NOTE: For overlay applications,
the optional stainless steel handle must be
mounted on a panel at least

5

/8" (16) thick.

For overlay applications, mount door handles
close to the opening edge of the door for ease
of opening

.

Dimensions in parentheses are in
millimeters unless otherwise specified.

12

1

1

/

4

"

(32)

PA N

EL

1"

(25)

PA N

EL

*

1

/

4

"

(6)

PA N

EL

1

/

2

"

(13)

PA N

EL

3

/

4

"

(19)

PA N

EL

130˚ DOOR OPENING

WITH 2" (51) FILLER STRIP

(

TOP VIEW)

OPTIONAL

FRAMED EXTENDED

FULL-LENGTH HANDLE

STANDARD

FRAMED

FULL-LENGTH

HANDLE

D

OOR CLOSED

DOOR OPEN @ 130˚

HINGE

2" (51)

F

ILLER STRIP

MAIN FRAME

A

LLOW FOR FILLER LAP

BEHIND FLANGE

APPROX

PROFILE OF

STAINLESS
STEEL DOOR
AND HANDLE

OVERLAY PANEL

3/4" (19) THICK

(NOMINAL)

S

UB-ZERO UNITSUB-ZERO UNIT

Planning Information

Built-In Model 601R

PANEL AND HANDLE PROFILE – 130˚ DOOR OPENING

The full-scale illustration above shows the panel
and handle profile of a 130˚ door opening with
2" (51) filler strip for framed applications.

Interference of door panels with handles at
maximum door s
optional 90˚ door stop available through your
Sub-Zero dealer.

Appr

*
stainless steel door

Dimensions in parentheses are in
millimeters unless otherwise specified.

oximate thic

wing ma

y require the use of an

kness of wr

.

pped

a

To obtain local dealer information, visit the
Locator section of our website, subzero.com.

The full-scale illustration on the following page
lets you see what considerations you need to

e for any overla

mak
how they may interact with adjacent cabinets

y panel applications, and

and/ or countertops.

13

Planning Information

1

1

/4

"

(32)

PA N

EL

1"

(25)

PA N

EL

*

1

/4

"

(6)

PA N

EL

1

/2

"

(13)

PA N

EL

3

/4

"

(19)

PA N

EL

1

1

/4

"

(32)

1

1

/2

"

(38)

1

3

/4

"

(44)

0"

(0)

1"

(25)

2"

(51)

2

1

/4

"

(57)

2

1

/

2

"

(63)

2

3

/

4

"

(70)

3"

(76)

3

1

/4

"

(83)

3

1

/

2

"

(89)

1

/4

"

(6)

1

/2

"

(25)

3

/4

"

(19)

HINGE

OVERLAY PANEL

3/4" (19) THICK (NOMINAL)

DOOR CLOSED

DOOR OPEN @ 90˚

90˚ DOOR OPENING

(TOP VIEW)

M

AIN FRAME

NOMINAL OVERALL

WIDTH OF SUB-ZERO

S

UB-ZERO UNIT

237/8" (606) TO REAR

O

F SUB-ZERO

Built-In Model 601R

OVERLAY PANEL APPLICATION – 90˚ DOOR OPENING

kness of wr

.

oximate thic

Appr

*
stainless steel door

Dimensions in parentheses are in

pped

a

millimeters unless otherwise specified.

14