Planning Information
Wine Storage Model 430
Full-Size
iscreet lighting Full-view glass
D
ermetically sealed refrigera-
H
tion units
oor
d
Model 430/F
ramed
F
Model 430/O
Overlay
Model 430/S
Classic
Stainless Steel
ighted electronic
L
control panel
Lighted display
helf
s
oller-assembly
R
helves
s
Home security tie-in
V-resistant glass
U
Divider gasket
erial and model
S
umber plate
n
Removable
kickplate
With the installation of a harness kit, these appliances
are Star-K compliant to meet strict religious regulations
in conjunction with specific instructions found on
star-k.org. You may purchase this harness kit through
your Sub-Zero dealer. To obtain local dealer information,
visit the Locator section of our website, subzero.com.
The Sub-Zero Model 430 Wine
Storage unit is available in your choice
of the framed, overlay or classic stainless steel design application. A unit with
high altitude glass may be ordered for
installations at or above 5,000' (1524 m)
in elevation.
Dimensions in parentheses are in
millimeters unless otherwise specified.
11/06
A great addition to Sub-Zero's complete line of
residential refrigeration is the Wine Storage equipment.
But it is more than just wine stor
tional sense. It is wine stor
make it. The ultimate in beauty, engineering, attention
to detail and smart thinking.
For the clients who cannot have a wine cellar within
their homes, consider using one or more of these units
together. One for white wines and the other for the
special reds.
It’s the biggest unit we offer with nearly 12 cases of
wine at your fingertips.
age in the conven-
age as only Sub-Zer
o could
1
Planning Information
30"
(762)
24"
(610)
84"
(2134)
301/8"
(765)
30"
(762)
291/4"
(743)
237/8"
(606)
BEHIND
FRAME
3
/8" (10)
FRAME
EXTENSION
Wine Storage Model 430
FEATURES
Full-size Wine Storage unit with 147 (750 ml)
bottle capacity
Framed, overlay and classic stainless steel
design options
Refrigeration system allows individual
temperature control of the two wine
compartments and ideal humidity
Illuminated display shelf for those prize
b
ottles
Sturdy, rustproof wire shelves accommodate
standard 750 ml bottles, half-bottles, as well
as magnums
Roller-glide shelves faced with natural cherry
wood have a three-quarter extension for
easy access
Full-view glass door with UV-resistant glass
protection
High altitude glass door unit can be special
ordered
Discreet low voltage interior lighting
Service light indicator, optional lock and
tie-in to home security system
UL approved for US and Canada
Two, five and twelve year residential
warranty—exclusions apply; warranty
information can be found on our website,
subzero.com
OVERALL DIMENSIONS
Dimensions may vary by ±1/8" (3).
Dimensions in parentheses are in
millimeters unless otherwise specified.
2
Planning Information
Wine Storage Model 430
SPECIFICATIONS
M
odel 430 Full-Size Wine Storage Unit
Overall Width 30" (762)
Overall Height 84" (2134)
MODEL OPTIONS
F
ramed Design 430__/F
Overlay Design 430__/O
Classic Stainless Steel 430__/S
DOOR OPTIONS
Full-View Glass Door 430G/__
High Altitude Glass Door 430HAG/__
You must allow 90 days from order to
delivery for high altitude glass door unit.
ACCESSORIES
Front, side and grille panels for
framed design in white, almond
and classic stainless steel
Louvered, panel or stainless steel
grilles in 1" (25) increments from
10" (254) to 15" (381) high
Tubular handles in classic,
platinum and carbon stainless
steel
Polished chrome handle for
overlay design
UL approved door lock kit
90˚ and 105˚ door stop kits
Accessories are available through your
Sub-Zero dealer. To obtain local dealer
information, visit the Locator section of
our website
, subzer
o.com.
Overall Depth 24" (610)
Wine Storage Capacity 147 Bottles (750 ml)
M
inimum Height Required 83" (2108)
Door Swing Clearance 301/8" (765)
Electrical Requirements 115 V AC, 60 Hz, 15 amp circuit
Shipping Weight Framed/Overlay – 435 lbs (197 kg)
Stainless Steel – 445 lbs (202 kg)
Special Note High altitude glass door is available
for elevations 5,000' (1524 m) or above
Specifications are subject to change without notice
.
Dimensions in parentheses are in
millimeters unless otherwise specified.
3
Planning Information
751/2"
(1918)
7"
(
178)
6"
(152)
291/2"
(
749)
R
OUGH OPENING WIDTH
24"
(610)
ROUGH
OPENING
DEPTH
E
LOCATE ELECTRICAL
WITHIN SHADED AREA
A
NTI-TIP BLOCK
FRONT VIEW
T
OP VIEW
833/4" (2127)
ROUGH OPENING
H
EIGHT
TO FINISHED
F
LOORING WITH
STANDARD
11" (279) GRILLE
83" (2108)
MIN HEIGHT
REQUIRED
(LEVELERS IN)
Wine Storage Model 430
INSTALLATION SPECIFICATIONS
DIMENSIONS
Finished Rough Opening Width 291/2" (749)
Finished Rough Opening Height 833/4" (2127)
inished Rough Opening Depth 24" (610)
F
Location of Electrical Within shaded area
See Installation Instructions shipped with unit for detailed specifications.
Dimensions in parentheses are in
millimeters unless otherwise specified.
4
Planning Information
Wine Storage Model 430
INSTALLATION NOTES
R
efer to the illustrations and specifications
for overall dimensions, finished rough opening
dimensions and installation specifics.
T
he Wine Storage unit must be installed to
open a minimum of 90˚ or you will have
problems pulling the shelves out.
For corner installations, you need allow for a
minimum 3" (76) filler so the door can open to
90˚. If you are using larger handle hardware,
you will also need to take that into account.
If you are installing a Wine Storage unit next
to an existing Sub-Zero unit, you may have to
allow for a filler strip. Also, if there is 2" (51) or
less in between units, an optional heater kit will
need to be installed to prevent moisture from
forming in between units.
If you are connecting the unit to your home
security system, you must allow a minimum of
36" (914) of the system's wiring to be routed in
the electrical area designated for your model.
If there is a solid soffit above the unit with
clearance of 1" (25) or less, you will not need to
block the unit. However, for installations with
clearance of more than 1" (25), you must block
the unit with the anti-tip blocking kit (wood
block and hardware) provided with the Model
430 to prevent the unit from tipping forward
ovide a stable installation. Refer to the
and pr
Wine Storage Installation Instructions for
further details on blocking of the unit.
If your client has chosen the Model 430
classic stainless steel design, the unit will be
shipped complete with wrapped stainless steel
doors and tubular handles. You will not have to
install a fr
For the framed and overlay designs, you will
need to provide a door panel frame for the glass
door. Refer to pages 6–10 for complete panel
information.
IMPOR
not be installed on a glass door unit, as this
y cause moisture to form behind the panel.
ma
ont door panel.
TANT NOTE:
A solid door panel must
F
or Model 430, the weight limit for the door
panel frame is 25 lbs (11 kg).
For overlay panel applications, you must
s
upply your own handle hardware. It is recommended you use our optional handles and use
the pre-drilled holes supplied to locate the
handles within the frame of our unit. Refer to
page 11 for specifics about installing handle
hardware
The Model 430 overlay unit will be shipped
without handle hardware and with an 11" (279)
overlay panel grille as standard equipment. You
will need to order a panel for the grille and
hardware to complement your surrounding
cabinetry.
While the overlay panel design offers you a
more seamless appearance, you need to be
aware of adjacent cabinets and/ or countertops
when the door is opened. Refer to the full-scale
illustrations at the end of this section.
Sub-Zero has provided a natural cherry wood
facing to each of the wine shelves. You can
choose to replace these strips with wood more
complementary to y
our design and surr
ounding
cabinetry. Refer to the full-scale illustration on
page 13 for dimensions on the wood facing
.
A 115 V AC, 60 Hz, 15 amp fused electrical
supply is required
. It is recommended that a
separate circuit, serving only this appliance, be
provided.
All Sub-Zero Wine Storage units are
equipped with a power supply cord with a
3-prong grounding plug which must be plugged
into a mating 3-prong grounding type wall
Locate electrical within the shaded
receptacle
.
area shown in the installation illustration on
page 4.
You must follow all National Electrical Code
regulations. In addition, be aw
and ordinances when installing y
are of local codes
our service
.
Refer to the Wine Storage Installation Instruc-
ked with the appliance, which provides
pac
tions
step-by-step procedures for making sure the
.
unit is installed pr
operly
Dimensions in parentheses are in
millimeters unless otherwise specified.
5
Planning Information
W
W
H
H
Wine Storage Model 430
INTEGRATING CABINETRY
Unless you are installing a stainless steel unit, you will
need to provide a door panel frame for the glass door. If
you order a stainless steel unit, the Model 430 will be
shipped with panels and hardware installed and you will
m
erely install the Sub-Zero.
FRAMED PANELS
Refer to page 7 for detailed information on integrating
cabinetry for the framed panel application.
An 11" (279) louvered grille is standard on framed applications. Optional louvered grilles are available in 1" (25)
height increments from 10" (254) to 15" (381).
You may choose to use Sub-Zero's optional panel grille for
the Model 430 framed application. Optional panel grilles
are available in 1" (25) height increments from 10" (254) to
15" (381). See chart below for panel dimensions.
FRAMED PANEL DIMENSIONS
Framed Door and Grille Panels
WIDTH HEIGHT
Door Panel 281/8" (714) 6711/16" (1719)
Width of Rails and Stiles 21/4" (57) min
Door Panel Weight Limit 25 lbs (11 kg)
Panel Thickness
FRAMED
GRILLE
P ANEL DIMENSIONS
WIDTH
5
/8" (16) min
HEIGHT
10" (254) Grille 283/16" (716) 815/16" (227)
11" (279) Grille 283/16" (716) 915/16" (252)
12" (305) Grille 283/16" (716) 1015/16" (278)
3
(330) Grille
13"
28
/16" (716) 1115/16" (303)
14" (356) Grille 283/16" (716) 1215/16" (329)
15" (381) Grille 283/16" (716) 1315/16" (354)
Dimensions in parentheses are in
millimeters unless otherwise specified.
6
Planning Information
21/4" (57)
Rail/Stile
D
oor
Frame
5
/8"
(16)
G
lass
T
rim Reveal
1
/4" (6) min
Rout to
1
/4" (
6)
thickness
* INCH (13) ADJUSTMENT IN LEVELING LEGS
MODEL 430 CABINETRY DIMENSIONS
1
2
FRONT VIEW SIDE VIEW
84
(2134)
4
1
16
(103)
68
(1727)
CENTERED
VERTICALLY
DOOR
PANEL
TOE
KICK
DOOR FRAME
(722)
7
1
6
28
30
(762)
Wine Storage Model 430
FRAMED PANELS
FRAMED PANELS
The framed treatment of panels for Model 430 is identical
to the Model 611 in width and Model 632 in height.
You cannot use a
should consider using raised panels with a minimum
1
/4" (6) panel to cover the glass door. You
5
/8"
(16) thickness. When using a raised, framed panel, you must
a
llow for an edge to rout around the panel to ensure a
proper fit. Refer to the illustration.
W
ith the framed Model 430, you will receive an extruded
handle identical in appearance to the Built-In units. However,
it will be an extended handle and will enable you to use
raised panels without providing finger clearance to open the
door.
Refer to the Model 430 framed panel dimensions chart on
page 6 for complete details on the size of the framed panel.
Raised panel 5/8" (16) thick minimum
A solid panel must not be
installed on a glass door unit, as
this may cause moisture to form
behind the panel.
Dimensions in parentheses are in
millimeters unless otherwise specified.
7
Planning Information
W
W
H
H
Backer
Panel
B
Spacer Panel
Overlay Panel
1
/4" (6)
.10" (3)
5
/8"
min
(16)
Wine Storage Model 430
OVERLAY PANELS
Refer to page 9 for detailed information on integrating
cabinetry for the overlay panel application. Also refer to the
full-scale illustrations at the end of this section.
An 11" (279) panel grille is standard on overlay applications. Optional panel grilles are available in 1" (25) height
i
ncrements from 10" (254) to 15" (381).
OVERLAY PANEL DIMENSIONS
WIDTH HEIGHT
Door Panel 287/16" (722) 68" (1727)
Door Spacer 271/2" (699) 671/16" (1073)
Door Backer 281/8" (714) 6711/16" (1719)
Width of Rails and Stiles 21/4" (57) min
Door Panel Weight Limit 25 lbs (11 kg)
Panel Thickness
5
/8" (16) min
Overlay Door and Grille Panels
OVERLAY GRILLE PANEL DIMENSIONS
WIDTH HEIGHT
10" (254) Grille Panel 287/16" (722) 91/4" (235)
10" (254) Grille Spacer 271/2" (699) 85/16" (211)
10" (254) Grille Backer 281/8" (714) 815/16" (227)
11" (279) Grille Panel 287/16" (722) 101/4" (260)
11" (279) Grille Spacer 271/2" (699) 95/16" (237)
11" (279) Grille Backer 281/8" (714) 915/16" (252)
12" (305) Grille P
anel 28
7
/16" (722) 111/4" (286)
12" (305) Grille Spacer 271/2" (699) 105/16" (262)
12" (305) Grille Backer 281/8" (714) 1015/16" (278)
13" (330) Grille Panel 287/16" (722) 121/4" (311)
(330) Grille Spacer
13"
1
7
2
/2" (699) 1
5
1
/16" (287)
13" (330) Grille Backer 281/8" (714) 1115/16" (303)
Three panel assembly – rear view
14" (356) Grille Panel 287/16" (722) 131/4" (337)
14" (356) Grille Spacer 271/2" (699) 125/16" (313)
(356) Grille Bac
14"
ker 28
1
/8" (714) 1
15
2
/16" (329)
15" (381) Grille Panel 287/16" (722) 141/4" (362)
15" (381) Grille Spacer 271/2" (699) 135/16" (338)
(381) Grille Bac
15"
Grille P
anel W
er
k
eight Limit
1
8
2
/8" (714) 1
15
3
/16" (354)
15 lbs (7 kg)
Dimensions in parentheses are in
millimeters unless otherwise specified.
8
Planning Information
1
/4" (6) B
acker Panel
21/4" (57) Rail/ Stile
.10" (3) Spacer Panel
O
verlay Panel
D
oor Frame Glass
.10"
(3)
5
/16" (8) min
1
/16" (2)
5
/32" (4)
Door/Grille
Trim
Backer
Panel
B
Spacer Panel
Overlay Panel
1
/4" (6)
.10" (3)
5
/8"
min
(16)
Wine Storage Model 430
OVERLAY PANELS
The overlay treatment of panels for Model 430 is identical
to the Model 611 in width and Model 632 in height, you
will need to be aware of some of flexibility and limitations
these issues give you.
OVERLAY PANELS
Three panel assembly – cross section
Your overlay unit will be shipped without handle hardware
a
nd with an 11" (279) overlay panel grille as standard
equipment. You will need to order a panel for the grille and
hardware to complement your surrounding cabinetry.
While the overlay panel design offers you a more seamless
appearance, you need to be aware of adjacent cabinets
and / or countertops when the door is opened. Refer to the
full-scale illustrations at the end of this section.
To achieve the overlay look, you need three different
panels – the decorative overlay panel, a 0.10" (3) spacer
panel and a
1
/4" (6) backer panel. Depending on your
cabinet manufacturer, this could be one panel routed for
different dimensions or more lik
ely, three different panels.
Refer to the Model 430 overlay panel dimensions chart on
page 8 for complete details on overlay panel sizing. In
addition, the illustr
ations on this page will give you a
better idea of the panel construction and how it interacts
with our frame.
The glass door opening of the Model 430 is designed to
be exposed to room air circulation. Decorative overlays on
the glass should be k
ept to a minimum. Also, rails and
stiles can be increased in size but should not exceed
cabinet manufacturers standard width. They cannot
exceed over
all door panel dimensions specified, as they
would interfere with the operation of the door.
Three panel assembly – rear view
Dimensions in parentheses are in
millimeters unless otherwise specified.
The back sides of rails and stiles that will be visible
through the glass door will need to be finished. Also, the
front surface.
inside edges of the fr
ame must be finished to match the
9
Planning Information
131/4" (337)
4" (102)
1
/4" (6)
1
/4" (6)
3"
(76)
3" (76)
2
3
7
/8" (
606)
B
EHIND FRAME
1
Wine Storage Model 430
SIDE PANELS
GRILLE PANELS
As with all Sub-Zero Built-In units, you have the flexibility
of ordering larger grilles for either the framed or overlay
applications. Optional grilles are available in 1" (25) height
increments from 10" (254) to 15" (381). The 11" (279)
louvered grille is standard on the framed application, and
an 11" (279) panel grille is standard for the overlay application. You may also choose to use the optional panel grille
for the Model 430 framed application. For specific panel
sizing on these optional grilles, refer to grill panel specifications on pages 6 and 8.
SIDE PANELS
When planning for a side panel with the installation of the
Model 430, you need to be aware of space configuration
to achieve a pleasing fit. Depending on the exact panel you
are using with your unit, the height of the panel will vary.
Refer to the illustr
ation for placement of cut-outs around
the grille and toe kick area and remember that the dimension to the back of the main frame is 23
7
/8" (606).
Cut-outs for grille and toe kick area
IMPORTANT NOTE: The use of side panels, depending on
their thickness, may change the width of your rough
opening
.
Dimensions in parentheses are in
millimeters unless otherwise specified.
10
Planning Information
Wine Storage Model 430
When planning for hardware,
please refer to the Door Frame
Profile full-scale illustration on
the following page to give you a
better understanding of the
unit's frame and positioning of
the glass for the door. You must
not drill through the glass.
HARDWARE CONSIDERATIONS
With the Model 430 (overlay), you must supply your own
handle hardware. It is recommended that you use our
optional handles and use the pre-drilled holes supplied to
locate the handles within the frame of our unit. The metal
frame on the door has numerous mounting holes on each
side to accommodate Sub-Zero accessory handles. This
will allow you to provide the best possible handle alignment and not take away from the strength of the stile in
this area after the unit is used a number of times. We
recommend using a pull handle and not a pull knob.
If you elect to place different hardware on these units, we
encourage you to fasten the hardware by passing through
our door and attach the hardware through the Sub-Zero
door's frame.
Optional stainless steel handles are available in a variety of
diameters and lengths in the classic, platinum and carbon
stainless steel finishes and polished chrome. Contact
your Sub-Zero dealer for specifics. To obtain local dealer
information, visit the Locator section of our website,
subzero.com.
W OOD FA CING – WINE SHELVES
Sub-Zero has provided a natural cherry wood facing to
each of its wine shelves in each model. If, however, you
would like to replace these strips with wood more complementary to your design and surrounding cabinetry, you
can.
The Wine Shelf Wood Facing Dimensions illustration, on
page 13, can be used as a full-scale template. You must
follow the la
yout of this format to accommodate the
shelves properly. To remove the cherry strips, take the
shelves out and merely remove the screws. Reverse the
ocedure to affix the new wood
pr
.
If you choose to stain or seal the wood facing, be aware
that some of these substances are hazardous and will
damage stored wine.
Dimensions in parentheses are in
millimeters unless otherwise specified.
11
Planning Information
DOOR FRAME PROFILE
1
5
/16" (
24)
1
5
/16" (
24)
21/4" (57) Rail/Stile
Glass
C
L
Cabinet Door
Profile
Wine Storage Model 430
WINE STORAGE DOOR FRAME
The full-scale illustration above is typical
of the Model 424 door fr
details of the other Wine Storage door
frames will vary slightly.
ame profile,
Dimensions in parentheses are in
millimeters unless otherwise specified.
FULL-SCALE TEMPLATE
The full-scale illustrations on this page and the following
page enables you to understand some of the unique situations you may face as you design the Wine Storage units
into homes. These templates can be easily photocopied or
acings.
used in y
our tr
IMPORTANT NOTE: Rails and stiles must be wide enough
to cover the door hinges. The bac
that will be visible thr
ough the glass door will need to be
k sides of r
ails and stiles
finished.
12
Planning Information
249/16" (624)
WIDTH
Maximum Thickness
FRONT VIEW
SIDE VIEW
11/2" (
38)
5
/8"
(
16)
7
/64"
(3)
5
/64"
(
2)
2
3
/64"
(9)
9
/16" (
14)
27
/32"
(
21)
Wine Storage Model 430
WINE SHELF WOOD FACING
Dimensions in parentheses are in
millimeters unless otherwise specified.
FULL-SCALE TEMPLATE
Use the full-scale illustration above as a template if you
choose to replace the natural cherry wood facing with
wood more complementary to your design and surrounding cabinetry.
13
Loading...