Planning Information
Wine Storage Model 427
Full-Size
iscreet lighting
D
odel 427
M
Lighted electronic
ontrol panel
c
Lighted display
helf
s
assembly
Rollershelves
Home security tie-in
Full-view glass
oor (standard)
d
ivider gasket
D
Serial and model
umber plate
n
resistant glass
UV-
Front venting with
removable kickplate
With the installation of a harness kit, these appliances
are Star-K compliant to meet strict religious regulations
in conjunction with specific instructions found on
star-k.org. You may purchase this harness kit through
your Sub-Zero dealer. To obtain local dealer information,
visit the Locator section of our website, subzero.com.
The Sub-Zero Model 427 Wine
Storage unit, integrated design accepts
custom wood or stainless steel door
panels. Door panels and handles are
available as sales accessories in three
stainless steel finishes— classic, platinum
and carbon. A solid door unit may be
special ordered as well as a unit with high
altitude glass for installations at or above
5,000' (1524 m) in elev
Dimensions in parentheses are in
millimeters unless otherwise specified.
11/06
ation.
A great addition to Sub-Zero's complete line of
residential refriger
ation is the
But it is more than just wine storage in the conventional sense. It is wine storage as only Sub-Zero could
make it. The ultimate in beauty, engineering, attention
to detail and smart thinking.
This unique unit is compatible with the Integrated line
of products offered by Sub-Zero and would be a nice
addition to a line of a tall refriger
someone’
s home. When y
surrounding cabinetry you should review the Integrated
Refrigeration section of this Guide to get you into the
proper frame of mind.
Wine Storage equipment.
ator or tall freezer in
ou think a
bout panels and
1
Planning Information
14
FRONT VIEW SIDE VIEW
(356)
(UNIT DIMENSION)
13
16
(20)
*78
5
8
(1997)
8
15
16
(227)
4
(102)
27
(686)
24
(610)
3
4
(273)
10
CENTERED
VERTICALLY
DOOR FRAME
(664)
1
8
26
70
7
16
(1789)
DOOR
FRAME
WITH
HINGES
80
(2032)
1
/2" (13)
+
_
ADJUSTMENT IN LEVELING LEGS
237/8"
(606)
NOTE: Door swing clearances are based on stainless steel door and handle dimensions.
90˚
105˚
MAXIMUM
DOOR SWING
35" (889)
DOOR CLEARANCE
28" (711)
DOOR CLEARANCE
251/2"
(648)
251/2"
(648)
Wine Storage Model 427
FEATURES
Full-size Wine Storage unit with 132 (750 ml)
bottle capacity
Integrated design accepts custom wood or
stainless steel door panels offered in three
stainless finishes
Refrigeration system allows individual
temperature control of the two wine
compartments and ideal humidity
I
lluminated display shelf for those prize
b
ottles
Sturdy, rustproof wire shelves accommodate
standard 750 ml bottles, half-bottles, as well
as magnums
Roller-glide shelves faced with natural cherry
wood have a three-quarter extension for
easy access
Full-view glass door standard with UVresistant glass protection
Solid door unit and high altitude glass unit
can be special ordered
Discreet low voltage interior lighting
Service light indicator, optional lock and
tie-in to home security system
The exclusive dual action hinge has a built-in
90˚ door stop
UL approved for US and Canada
Two, five and twelve year residential
warranty—exclusions apply; warranty
information can be found on our website,
o.com
subzer
OVERALL DIMENSIONS
Overall dimensions shown in the standard
full-view glass door application.
Dimensions may vary by ±
1
/8" (3).
Dimensions in parentheses are in
millimeters unless otherwise specified.
2
Planning Information
Wine Storage Model 427
SPECIFICATIONS
M
odel 427 Full-Size Wine Storage Unit
Overall Width 27" (686)
Overall Height 80" (2032)
DOOR OPTIONS
F
ull-View Glass Door
(
standard) 427G
Solid Door 427S
High Altitude Glass Door 427HAG
Y
ou must allow 90 days from order to
d
elivery for solid door and high altitude
g
lass door units.
PANEL OPTIONS
Integrated (custom panels)
Classic Stainless Steel Finish /S
Platinum Stainless Steel Finish /P
Carbon Stainless Steel Finish /B
Stainless steel full-view glass and solid
door front panels are ordered and shipped
as sales accessories and include tubular
handles.
ACCESSORIES
Tubular handles in classic,
platinum and carbon stainless
steel
olished chrome handles for
P
custom panel applications
UL approved door lock kit
Dual installation
Accessories are available through your
Sub-Zero dealer. To obtain local dealer
information, visit the Locator section of
our website, subzero.com.
heater kit
Overall Depth 24" (610)
Wine Storage Capacity 132 Bottles (750 ml)
M
inimum Height (levelers in) 79
1
/2"
(2019)
Door Swing Clearance 251/2" (648)
Electrical Requirements 115 V AC, 60 Hz, 15 amp circuit
Shipping Weight Glass Door – 395 lbs (179 kg)
Solid Door – 386 lbs (175 kg)
Special Note High altitude glass doors are available
for elevations 5,000' (1524 m) or above
Specifications are subject to change without notice
.
Dimensions in parentheses are in
millimeters unless otherwise specified.
3
Planning Information
ANTI-TIP
BRACKET*
*PLACEMENT OF THE
ANTI-TIP BRACKET
SHOULD BE 24" (610)
FROM THE FRONT OF THE
UNIT WITHOUT PANELS
TO THE BACK OF THE
ANTI-TIP BRACKET.
25"
(635)
27"
(686)
2
5"
(635)
11/2"
(38)
1
3
1
/2"
(343)
TOP VIEW
SIDE VIEW FRONT VIEW
ANTI-TIP
BRACKET
80"
(2032)
41/2"
(114)
21/2" (64)
151/2" (394)
1
/4"
(6)
13" (330)
ANTI-TIP
BRACKET
LOCATE ELECTRICAL WITHIN
SHADED AREA – ORIENT GROUND
PRONG TO RIGHT AS SHOWN
NOTE: ANTI-TIP BRACKET MUST BE INSTALLED TO
PREVENT UNIT FROM TIPPING FORWARD
Wine Storage Model 427
INSTALLATION SPECIFICATIONS
DIMENSIONS
Finished Rough Opening Width 27" (686)
Finished Rough Opening Height 80" (2032)
inished Rough Opening Depth 25" (635)*
F
Location of Electrical Within shaded area
*The depth of the Model 427 is 24" (610) from the front of the unit to its back. Your design may
necessitate moving the unit back, or cabinets forward to achieve a flush fit. This will require a
minimum rough opening depth of 25" (635).
See Installation Instructions shipped with unit for detailed specifications.
Dimensions in parentheses are in
millimeters unless otherwise specified.
4
Planning Information
Wine Storage Model 427
INSTALLATION NOTES
R
efer to the illustrations and specifications
for overall dimensions, finished rough opening
dimensions and installation specifics.
I
MPORTANT NOTE: The depth of Model 427 is
24" (610) from the front of the unit to its back.
Your design may necessitate moving the unit
back, or cabinets forward to achieve a flush fit.
This will require a minimum rough opening
depth of 25" (635). Refer to the installation
illustration on page 4.
The Wine Storage unit must be installed to
open a minimum of 90˚ or you will have
problems pulling the shelves out.
For corner installations, you need allow for a
minimum 3" (76) filler so the door can open to
90˚. If you are using some larger handle
hardware, you will also need to take that into
account. For a maximum 90˚ door opening, use
the door stop built into the hinge system.
If you are installing a wine unit next to an
existing Sub-Zero unit, you may have to allow
for a filler strip. Also, if there is 2" (51) or less
in between units, an optional heater kit will
need to be installed to prevent moisture fr
forming in between units.
If you are connecting the unit to your home
security system, you must allow a minimum of
36" (914) of the system's wiring to be r
the electrical area designated for your model.
The anti-tip bracket must be installed to
prevent the unit from tipping forward.
If your client has chosen the Model 427
stainless steel design, you will need to have
the stainless steel panels and handle hardw
installed.
F
or the integrated design, you will need to
provide a complete door panel in the instance
of a solid door unit, or a frame for the glass
pplication, where wine will be seen fr
door a
the outside
. Refer to pages 6–11 for complete
panel information.
IMPORTANT NOTE: A solid door panel must
not be installed on a glass door unit, as this
may cause moisture to form behind the panel.
Solid door models are available as a special
order and require 90 days for delivery.
om
outed in
are
om
T
he door panel for Model 427 can grow
beyond the 80" (2032) height to accommodate
any size of door as long as you stay below door
panel weight limit.
For Model 427, the weight limit for a frame
panel for the glass door unit is 20 lbs (9 kg).
The weight limit for a solid door panel is 40 lbs
(18 kg).
If you are installing Sub-Zero's optional lock
kit, you may have to order door panels that
exceed the 80" (2032) finishing height. Consult
the lock installation instructions and see if your
panels will allow for an adequate installation.
For integrated panel applications, you must
supply your own handle hardware. It is recommended you use our optional handles and use
the pre-drilled holes supplied to locate the
handles within the frame of our unit. Refer to
page 12 for specifics about installing handle
hardware.
Sub-Zero has provided a natural cherry wood
facing to each of the wine shelves. You can
choose to replace these strips with wood more
complementary to y
our design and surr
ounding
cabinetry. Refer to the full-scale illustration on
page 14 for dimensions on the wood facing
.
A 115 V AC, 60 Hz, 15 amp fused electrical
supply is required
. It is recommended that a
separate circuit, serving only this appliance, be
provided.
All Sub-Zero Wine Storage units are
equipped with a power supply cord with a
3-prong grounding plug which must be plugged
into a mating 3-prong grounding type wall
Locate electrical within the shaded
receptacle
.
area shown in the installation illustration on
page 4.
You must follow all National Electrical Code
regulations. In addition, be aw
and ordinances when installing y
are of local codes
our service
.
Refer to the Wine Storage Installation Instruc-
ked with the appliance, which provides
pac
tions
step-by-step procedures for making sure the
.
unit is installed pr
operly
Dimensions in parentheses are in
millimeters unless otherwise specified.
5
Planning Information
Wine Storage Model 427
A solid panel must not be
installed on a glass door unit, as
this may cause moisture to form
behind the panel.
INTEGRATING CABINETRY
Unless you are installing a stainless steel unit, you will
need to provide a full door panel in the instance of a solid
door unit, or a frame for the glass door application, where
wine will be seen from the outside. If you order a stainless
steel Model 427, you will need to have the stainless steel
panel and handle installed.
INTEGRATED PANELS
If you are familiar with our Integrated line and its panel
applications, this section will be relatively easy to understand. The Wine Storage solid door panels or frame panels
for glass doors will follow some of the identical planning
processes you learned with the Integrated line. The installation of the door panels is completely different, however.
Rather than using the mounting hardware we used with
the Integrated units, the door panel for Model 427 will be
attached with screws a
pplied through our door.
IMPORTANT NOTE: The depth of Model 427 is 24" (610)
om the fr
fr
ont of the unit to its back. You MUST allow
for the thickness of the panel you are applying when
planning for the finished rough opening depth if you
want the fr
ont panel to be flush with surrounding cabinetry. You may have to move the unit back into drywall
or bring the cabinets forward.
The glass door opening of the standard Model 427 is
designed to be exposed to room air circulation. Decorative
overlays on the glass should be kept to a minimum. While
the cabinet front stiles are a minimum of 2
1
/4" (57), the
top and bottom rails are different. Rails and stiles can be
increased in size but should not exceed cabinet manufacturers standard width. They cannot exceed overall door
panel dimensions specified, as they would interfere with
the operation of the door. The back sides of rails and stiles
that will be visible through the glass door will need to be
finished
. Also, the inside edges of the fr
ame must be
finished to match the front surface.
Dimensions in parentheses are in
millimeters unless otherwise specified.
6
Planning Information
Wine Storage Model 427
IMPORTANT NOTE: Wine Storage
models with a solid door are available
a
s a special order and require 90 days
for delivery.
INTEGRATED PANELS
The dimensions of these panels and stiles are assuming
the Model 427 finishes off at 80" (2032) in height overall
and has a 4" (102) toe kick. If you finish off at 84" (2134)
for instance, you must add 4" (102) additional to the
overall height of the panel and remember to add 4" (102)
to the top rail. Likewise, if you allow for a 6" (152) toe kick
for the Model 427, you must subtract 2" (51) from the
bottom rail.
IMPORTANT NOTE: The toe kick area on the Model 427
cannot be larger than 6" (152) or less than 4" (102). Refer
to toe kick specifications for Integrated Models.
A solid panel must not be
installed on a glass door unit, as
this may cause moisture to form
behind the panel.
The door panel for Model 427 can grow beyond the 80"
(2032) height to accommodate any size of door as long as
you stay below door panel weight limit of 40 lbs (18 kg)
for solid door and 20 lbs (9 kg) for glass door units. Refer
to upper valance specifications for Integrated Models.
IMPOR
TANT NOTE:
ou are installing Sub-Zero's
If y
optional lock kit on a Model 427, you may have to order
door panels that exceed the 80" (2032) finishing height.
Consult the loc
k installation instructions and see if your
panels will allow for an adequate installation.
The door fr
ame of the unit has pre-drilled holes for our
optional handle hardware. Refer to Hardware Considerations on page 12 for specifics about installing handle
are on this overlay application.
hardw
Refer to the charts and illustrations on the following pages
for specific dimensions for integrating cabinetry for Model
427.
For additional specifications and installation information
specific to Model 427, refer to pages 2–5. Also refer to the
comprehensive installation instructions that are shipped
with each unit.
Dimensions in parentheses are in
millimeters unless otherwise specified.
7
Planning Information
* INCH (13) ADJUSTMENT IN LEVELING LEGS
MODEL 427 CABINETRY DIMENSIONS
1
2
FRONT VIEW SIDE VIEW
(UNIT DIMENSION)
80
(
2032)
27
(686)
24
(
610)
DOOR PANEL
(679)
3
4
26
79
7
8
(2029)
TRIMMED
DOOR
FINISHED OPENING
75
7
8
(1927)
4
(102)
TOE KICK
4
(102)
TOE KICK
FINISHED
OPENING
DOOR
PANEL
Wine Storage Model 427
IMPORTANT NOTE: Wine Storage
models with a solid door are available
a
s a special order and require 90 days
for delivery. When ordering panels for
a solid door unit, follow the overall
panel dimensions indicated in the
chart, rail and stile dimensions do not
apply.
A solid panel must not be
installed on a glass door unit, as
this may cause moisture to form
behind the panel.
To give you a better idea of the exact space the Model
4
27 needs and how the panels fit in relationship with the
unit, refer to the following chart and illustration
.
MODEL 427 PANEL SPECIFICATIONS
Door Panel (W x H) 263/4" (
679)
x 757/8" (
1927)
Width of Top Rail 33/4" (95) min
Width of Bottom Rail 8" (203) min
Width of Stiles 21/4" (57) min
Door Panel Weight Limit Glass Door – 20 lbs (9 kg)
Solid Door – 40 lbs (18 kg)
Panel Thickness
5
/8" (16) min
Cabinetry dimensions shown in the
standard full-view glass door application.
Dimensions in parentheses are in
millimeters unless otherwise specified.
8
Planning Information
SUB-ZERO
UNIT
P
ANEL
C
ABINET
D
OOR
CABINET
FRAME
TO WALL
24
(
610)
1
/8" (3)
REVEAL
2
7
(
686)
PANEL
C
ABINET
DOOR
CABINET
FRAME
SUB-ZERO
UNIT
TO WALL
24
(
610)
1
/8" (3)
REVEAL
27
(
686)
PANEL
CABINET
DOOR
CABINET
FRAME
SUB-ZERO
UNIT
TO WALL
24
(610)
1
1
/8" (3)
REVEAL
2
27
(686)
2
Wine Storage Model 427
FRAMED CABINETRY
Traditional Frame – full overlay (top view).
FRAMED CABINETRY APPLICATIONS
F
ramed cabinetry applications present you with different
questions to address. The illustrations on this page show
common applications of framed cabinetry. These are not
meant to be the only alternatives, but are suggestions from
designers around the country. Also refer to the full-scale
illustrations at the end of this section for specifics on door
o
penings.
IMPORTANT NOTE: The depth of the Model 427 is 24"
(610) from the front of the unit to its back. You must allow
for the thickness of the panel you are applying when
planning for the finished rough opening depth if you want
the front panel to be flush with surrounding cabinetry. You
may have to move the unit back into drywall or bring the
cabinets forward to achieve a flush fit. Refer to the illustrations on this page.
The Illustration on the following page gives dimensions for
a Model 427 installed within a framed cabinetry beaded
pplication. Review the illustration, giving particular
inset a
attention to the overall panel specifications. Also refer to
the full-scale illustrations at the end of this section for
specifics on door openings.
Traditional Frame – standard overlay
(top view).
Traditional Frame – 3/8" (10) offset
(top view).
Dimensions in parentheses are in
millimeters unless otherwise specified.
9
Planning Information
A) ALL REVEALS ARE 1/8" (3)
B
) BOTTOM RAIL MUST BE REMOVABLE
*DIMENSIONS MAY VARY
B
A
TOP VIEW
A A
D
OOR PANEL
C
ABINET DOOR
T
O WALL
S
UB-ZERO
UNIT
PANEL WIDTH
11/2"
(38)
11/2"
(38)
753/4"
(1924)
FRONT VIEW SIDE VIEW
263/4" (679)
84"
(2624)
11/2"
(38)
11/2"
(38)
4"*
(102)
4" (102)
80"*
(2032)
24"
(610)
27"
(686)
SHADED AREA
INDICATES STATIONARY
STYLES AND RAILS
27"
(
686)
2
4"
(
610)
Wine Storage Model 427
FRAMED CABINETRY – BEADED INSET APPLICATION
The illustration shows a Model 427 installed within a
framed cabinetry beaded inset application.
IMPORTANT NOTE: Dimensions are based on a 1/8" (3)
reveal. A reveal of up to
1
/4" (6) is possible, but panel
dimensions need to be adjusted accordingly.
Installation of a Model 427 within framed
cabinetry.
*Dimensions ma
Dimensions in parentheses are in
millimeters unless otherwise specified.
y v
ary
.
10
Planning Information
A
A) ALL REVEALS ARE 1/8" (3) *DIMENSIONS MAY VARY
SIDE VIEW
24"
(610)
PANEL WIDTH
757/8"
(1927)
2
6
3
/4"
*
(679)
4"*
(102)
80"*
(2032)
27"
(686)
FINISHED OPENING
TOE KICK
797/8"*
(2029)
Wine Storage Model 427
FRAMELESS CABINETRY
FRAMELESS CABINETRY APPLICATIONS
The illustration below shows a hypothetical installation
of a Model 427 within frameless cabinetry. Review the
illustration, giving particular attention to the overall panel
specifications. Also refer to the full-scale illustrations at
the end of this section for specifics on door openings.
I
MPORTANT NOTE:Dimensions are based on a
reveal. A reveal of up to
1
/4" (6) is possible, but panel
1
/8"
(3)
dimensions need to be adjusted accordingly.
Installation of a Model 427 within
frameless cabinetry.
*Dimensions may vary.
Dimensions in parentheses are in
millimeters unless otherwise specified.
11
Planning Information
Wine Storage Model 427
When planning for hardware,
please refer to the Door Frame
Profile full-scale illustration on
page 13 to give you a better
understanding of the unit's
frame and positioning of the
glass for the door. You must not
drill through the glass.
HARDWARE CONSIDERATIONS
With the Model 427 you must supply your own handle
hardware. It is recommended you use our optional handles
and use the pre-drilled holes supplied to locate the handles
within the frame of our unit. The metal frame on the door
has numerous mounting holes on each side to accommodate Sub-Zero accessory handles. This will allow you to
provide the best possible handle alignment and not take
away from the strength of the stile in this area after the
unit is used a number of times. We recommend using a
pull handle and not a pull knob.
If you elect to place different hardware on the units, we
encourage you to fasten the hardware by passing through
our door and attach the hardware through the Sub-Zero
door's frame.
Optional stainless steel handles are available in a variety of
diameters and lengths in the classic, platinum and carbon
stainless steel finishes and polished chrome. Contact
your Sub-Zero dealer for specifics. To obtain local dealer
information, visit the Locator section of our website,
subzero.com.
W OOD FA CING – WINE SHELVES
Sub-Zero has provided a natural cherry wood facing to
each of its wine shelves in each model. If, however, you
would like to replace these strips with wood more complementary to your design and surrounding cabinetry, you
can.
The Wine Shelf Wood Facing Dimensions illustration, on
page 14, can be used as a full-scale template. You must
follow the la
yout of this format to accommodate the
shelves properly. To remove the cherry strips, take the
shelves out and merely remove the screws. Reverse the
ocedure to affix the new wood
pr
.
If you choose to stain or seal the wood facing, be aware
that some of these substances are hazardous and will
damage stored wine.
Dimensions in parentheses are in
millimeters unless otherwise specified.
12
Planning Information
DOOR FRAME PROFILE
7
/8" (
22)
7
/8" (
22)
21/4" (57) Rail/Stile
Glass
C
L
Cabinet Door
Profile
Wine Storage Model 427
WINE STORAGE DOOR FRAME
The full-scale illustration above is typical
of the Model 424 door fr
details of the other Wine Storage door
frames will vary slightly.
Dimensions in parentheses are in
millimeters unless otherwise specified.
ame profile,
FULL-SCALE TEMPLATE
The full-scale illustrations on this page and the following
page enables you to understand some of the unique situations you may face as you design the Wine Storage units
into homes. These templates can be easily photocopied or
acings.
used in y
our tr
IMPORTANT NOTE: Rails and stiles must be wide enough
to cover the door hinges. The bac
that will be visible thr
ough the glass door will need to be
k sides of r
ails and stiles
finished.
13
Planning Information
20
1
5
/16" (532)
WIDTH
Maximum Thickness
FRONT VIEW
SIDE VIEW
11/2" (
38)
5
/8"
(
16)
7
/64"
(3)
5
/64"
(
2)
2
3
/64"
(9)
9
/16" (
14)
27
/32"
(
21)
Wine Storage Model 427
WINE SHELF WOOD FACING
Dimensions in parentheses are in
millimeters unless otherwise specified.
FULL-SCALE TEMPLATE
Use the full-scale illustration above as a template if you
choose to replace the natural cherry wood facing with
wood more complementary to your design and surrounding cabinetry.
14
Planning Information
1
8
3
4
MIN.
(3)
PANEL
SIDE MOLDING AND
INSTALLATION HARDWARE
PROVIDED BY SUB-ZERO
LINE OF INTERFERENCE*
AT MAXIMUM DOOR OPENING
MOUNTING BRACKET SCREW
(19)
FLUSH
FURNITURE
FINISH
LINE OF INTERFERENCE*
TO BACK
OF UNIT
24
(610)
SUB-ZERO DOOR
REVEAL
T
25
7
8
(657)
DOOR WIDTH
24
(610)
LINE OF INTERFERENCE*
S
UB-ZERO
DOOR
TO BACK
OF UNIT
Wine Storage Model 427
FRAMED CABINETRY
IMPORTANT NOTE: The depth of the Model 427 is
24" (610) from the front of the unit to its back.
Your design may necessitate moving the unit back,
or cabinets forward to achieve a flush fit.
105˚ maximum door opening – 1/4 scale (top view)
Door closed – full scale (top view) *If the panel is thicker than 3/4" (19), it is recommended that you
Dimensions in parentheses are in
millimeters unless otherwise specified.
utilize the built-in 90˚ door stop to prevent damage to the panel
and face fr
ame
.
15
1
8
MIN.
(3)
REVEAL
3
4
PANEL
LINE OF INTERFERENCE*
AT MAXIMUM DOOR OPENING
MOUNTING BRACKET SCREW
(19)
TO BACK
OF UNIT
24
(610)
TO
WALL
24
(610)
LINE OF INTERFERENCE*
SUB-ZERO DOOR
3
/4" (19) DOOR PANEL
SIDE PANEL
COUNTERTOP
SIDE MOLDING AND
INSTALLATION HARDWARE
PROVIDED BY SUB-ZERO
LINE OF INTERFERENCE*
SUB-ZERO DOOR
25
7
8
(657)
DOOR WIDTH
Planning Information
TO
WALL
24
(610)
LINE OF INTERFERENCE*
SUB-ZERO DOOR
3
/4" (19) DOOR PANEL
S
IDE PANEL
COUNTERTOP
Wine Storage Model 427
FRAMELESS CABINETRY
IMPORTANT NOTE: The depth of the Model 427 is
24" (610) from the front of the unit to its back.
Your design may necessitate moving the unit back,
or cabinets forward to achieve a flush fit.
1
1
05˚ maximum door opening –
/4 s
cale (top view)
Door closed – full scale (top view) *If the panel is thicker than
Dimensions in parentheses are in
millimeters unless otherwise specified.
utilize the built-in 90˚ door stop to prevent damage to the panel
and face fr
ame
.
3
/4" (19), it is recommended that you
16
Loading...