Sub-Zero 315WORH, 315WOLH, 315WSTHLH, 315WSTHRH, 427RGRH Design Guide

...

Download

Page 1

Wine Storage Design Guide

Page 2

Contents

3 Wine Storage

4 Specications

12 Custom Panels

24 Full-Scale Templates

32 Warranty

Model 427G.

Features and specications are subject to change at any time without notice. Visit subzero.com/specs for the most up-to-date information.

IMPORTANT NOTE: Throughout this guide, dimensions may

vary by ±

/8" (3). Dimensions in parentheses are millimeters

unless otherwise specied.

Page 3

WINE STORAGE

Wine Storage

Wine nds a well-deserved place of honor in a Sub-Zero wine storage unit. Every detail is designed to ensure better wine preservation. Cherrywood-faced shelves, soft lighting, custom cabinetry if desired—Sub-Zero helps make a wine collection an element of beauty in the home.

WINE STORAGE MODELS

KEY FEATURES

• Integrated, overlay, ush inset and stainless steel design

options.

• Full-view glass door standard on all models.

• Freestanding model 424FSG does not require panels or

surrounding cabinetry.

• Discreet interior lighting with illuminated display shelf for

prized bottles of wine.

• Two independent storage zones maintain temperature,

humidity and UV protection.

• Roller-assembly wine shelves with natural cherrywood

facing have three-quarter extension for easy access.

• Wine shelves accommodate 750 ml bottles, half-bottles

and magnums.

315W

424G

424FSG

427G

427RG

WS-30

subzero.com/specs | 3

Page 4

WINE STORAGE

Overall Dimensions

MODEL 315W

151/8" (384) 24" (610)

341/16"

(865)

4" (102)

165/8"

(422)

13/4" (44)

MODEL 424G

237/8" (606) 24" (610)

34"

(864)

4" (102)

253/8"

(645)

SPECIFICATIONS

STORAGE CAPACITY BOTTLES (750 ML)

315W 26 424G 46 424FSG 46

SHIPPING WEIGHT LB (KG)

315W 118 (54) 424G 195 (88) 424FSG 220 (100)

13/4" (44)

Overall dimensions are based on stainless steel panels and handles. Refer to page 13 for door clearance information.

4 | Sub-Zero Customer Care 800.222.7820

Page 5

WINE STORAGE

OPENING WIDTH

341/2"

(876)

OPENING

HEIGHT

24" (610)

OPENING

DEPTH

TOP VIEW

SIDE VIEW FRONT VIEW

Overall Dimensions

MODEL 424FSG

241/4" (616) 245/8" (625)

343/16"

(868)

(102)

253/8"

(645)

Opening Dimensions

MODELS 315W AND 424G

13/4" (44)

Freestanding model 424FSG has a nished stainless steel exterior and handles.

OPENING WIDTH

MODEL W

315W 151/4" (387) 424G 24" (610)

subzero.com/specs | 5

Page 6

WINE STORAGE

27"

(686)

14" (356)

/16"

(21)

80"

(2032)

OPENING

HEIGHT

24"

(610)

789/16"

(1995)

815/16"

(227)

(102)

HEIGHT DIMENSIONS ±

/2" (13)

24"

(610)

251/2"

(648)

45/8"

(117)

27"

(686)

14" (356)

/16"

(21)

341/2"

(876)

203/8"

(518)

101/4"

(260)

131/4"

(337)

/2"

(13)

/8"

(10)

80"

(2032)

OPENING

HEIGHT

24"

(610)

789/16"

(1995)

93/4"

(248)

(102)

HEIGHT DIMENSIONS ±

/2" (13)

24"

(610)

191/2"

(495)

251/2"

(648)

45/8"

(117)

Overall Dimensions

MODEL 427G

MODEL 427RG

SPECIFICATIONS

STORAGE CAPACITY R CU FT (L) BOTTLES (750 ML)

427G 132 427RG 5.3

SHIPPING WEIGHT LB (KG)

(150) 78

427G 395 (179) 427RG 410 (186)

6 | Sub-Zero Customer Care 800.222.7820

Overall dimensions do not include panels or handles. Dimensions will vary with panel thickness.

Page 7

WINE STORAGE

SIDE

Opening Dimensions

MODELS 427G AND 427RG

TOP VIEW

(635)

25"

OPENING

DEPTH

OPENING DIMENSIONS

MODEL W H

427G 27" (686) 80" (2032) 427RG 27" (686) 80" (2032)

The depth of each integrated model is 24" (610). Allow for panel thickness when planning the nished opening depth.

DUAL INSTALLATION

When installing two integrated units (models 427G and 427RG) side by side in a dual installation, the opening width is the width of the two units added together. A dual installation kit will be required for this installation. If a dual installation kit is not specied, a minimum 2"

(51) ller strip is

required between units.

VIEW

OPENING

HEIGHT

OPENING WIDTH

FRONT VIEW

Dual installation kits are available through an authorized Sub-Zero dealer. For local dealer information, visit the nd a showroom section of our website, subzero.com. For questions regarding the installation, call Sub-Zero customer care at 800-222-7820.

subzero.com/specs | 7

Page 8

WINE STORAGE

30" (762)

84"

(2134)

(102)

733/4"

(1873)

237/8"

(606)

311/4"

(796)

17"

(432)

237/8" (606)

23/8" (60)

HEIGHT DIMENSIONS ±

/2" (13)

263/16" (665)

Overall Dimensions

MODEL WS-30

Opening Dimensions

MODEL WS-30 STANDARD INSTALLATION

24" (610)

OPENING

DEPTH

833/4"

(2127)

OPENING

HEIGHT

TOP VIEW

OPENING WIDTH

SPECIFICATIONS

STORAGE CAPACITY BOTTLES (750 ML)

WS-30 147

SHIPPING WEIGHT LB (KG)

WS-30 445 (202)

Overall dimensions are based on the stainless steel model.

For ush inset applications, add

/2" (13) to door clearance

dimensions.

FRONT VIEWSIDE VIEW

NOTE: Shaded line represents profile of unit.

OPENING WIDTH

MODEL W

WS-30 291/2" (749)

If an 83" (2108) grille height is specied, the opening height

must be decreased by specied, the opening height must be increased by 4"

/8" (22). If an 88" (2235) grille height is

(102).

If two units are installed side by side, refer to page 10 for dual standard installations.

8 | Sub-Zero Customer Care 800.222.7820

Page 9

WINE STORAGE

NOTE: Shaded line represents profile of unit with

SIDE

Opening Dimensions

MODEL WS-30 FLUSH INSET INSTALLATION

263/16"

(665)

FLUSH

INSET

23/16"

DEPTH

(56)

TOP VIEW

FINISHED

CLEATS*

/4"

(6)

84"

(2134)

FLUSH

INSET

HEIGHT

VIEW

" (76) typical depth. Shaded areas will be visible and should be finished to match cabinetry.

11/4"

(32)

FLUSH INSET WIDTH

3/4" (19) panel.

FRONT VIEW

4" (102)

11/4"

(32)

(76)*

TYPICAL

23/16"

(56)

FLUSH INSET WIDTH

MODEL W

WS-30 32" (813)

Dimensions assume a 3/4" (19) panel thickness.

If an 83" height must be decreased by

(2108) grille height is specied, the ush inset

/8" (22). If an 88" (2235) grille

height is specied, the ush inset height must be increased

(102).

by 4"

If two units are installed side by side, refer to page 11 for dual ush inset installations.

subzero.com/specs | 9

Page 10

NOTE: Shaded line represents profile of unit.

SIDE

WINE STORAGE

Opening Dimensions

MODEL WS-30 DUAL STANDARD INSTALLATION

24" (610)

OPENING

DEPTH

TOP VIEW

VIEW

833/4"

(2127)

OPENING

HEIGHT

OPENING WIDTH

MODELS W

WS-30 and 30" Built-In 593/4" (1518) WS-30 and 36" Built-In 653/4" (1670)

FRONT VIEW

A dual installation kit will be required for this installation.

10 | Sub-Zero Customer Care 800.222.7820

Page 11

NOTE: Shaded line represents profile of unit with

SIDE

WINE STORAGE

Opening Dimensions

MODEL WS-30 DUAL FLUSH INSET INSTALLATION

263/16"

(665)

FLUSH

INSET

DEPTH

23/16"

(56)

TOP VIEW

FINISHED

CLEATS*

/4"

(6)

84"

(2134)

FLUSH

INSET

HEIGHT

VIEW

" (76) typical depth. Shaded areas will be visible and should be finished to match cabinetry.

3/4" (19) panel.

11/4"

(32)

FLUSH INSET WIDTH

FRONT VIEW

11/4"

(32)

4" (102)

(76)*

TYPICAL

23/16"

(56)

FLUSH INSET WIDTH

MODELS W

WS-30 and 30" Built-In 621/4" (1581) WS-30 and 36" Built-In 681/4" (1734)

Dimensions assume a 3/4" (19) panel thickness. A dual installation kit will be required for this installation.

subzero.com/specs | 11

Page 12

WINE STORAGE

Electrical

The electrical supply should be located within the shaded area shown in the illustration for your specic model. For model 315W, the electrical supply can be located anywhere on the back wall of the opening. A separate circuit, servicing only this appliance is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation.

If the unit will be connected to a home security system, allow 36"

IMPORTANT NOTE: For models 427G and 427RG, it is

critical the electrical outlet be positioned with the grounding prong to the right of the thinner blades.

Installation must comply with all applicable electrical codes.

ELECTRICAL REQUIREMENTS

Electrical Supply 115 VAC, 60 Hz

Service 15 amp

Receptacle 3-prong grounding-type

(914) of excess wiring for proper connection.

Custom Panels

For framed, overlay, integrated and ush inset applications, custom door panels must be provided. Handle hardware must also be provided for overlay, integrated and ush inset applications. Refer to panel requirements and custom panel dimensions charts for your specic model and design application.

Do not install a solid panel on a glass door unit. A solid door is available as a sales accessory (except model 315W and WS-30) and must be installed if a solid panel is being specied. Service may be required to install the door. Contact an authorized Sub-Zero dealer for more information. Overall dimensions are the same for glass and solid door panels.

Finish all sides of the custom panels. They may be visible when the door is open or through the window of glass door models.

Model 424FSG has a nished stainless steel exterior that is designed to be used in a freestanding application.

LEFT SIDE

OF OPENING

(51)

Model 424G.

FROM FLOOR

Model WS-30.

151/2"

(394)

FLOOR

(178)

751/2" (1918)

RIGHT SIDE

OF OPENING

(152)

3" (76)

LEFT SIDE

OF OPENING

21/2"

(64)

13" (330)

41/2"

(

/4"

(6)

FLOOR

Models 427G and 427RG.

114

)

12 | Sub-Zero Customer Care 800.222.7820

Page 13

WINE STORAGE

Custom Panels—315W and 424G

For models 315W and 424G, the custom door panel will attach directly to the door frame with screws through a series of pre-drilled holes.

Refer to the charts for panel requirements and dimensions.

PANEL REQUIREMENTS

PANEL WEIGHT MAX

315W 10 lb (5 kg) 424G 10 lb (5 kg)

PANEL THICKNESS MIN

All Panels

/8" (16)

OVERLAY PANEL DIMENSIONS

315W / 424G

PANEL DIMENSIONS

MODEL W H

315W 15" (381) 301/16" (764) 424G 233/4" (603) 301/16" (764)

STILES / RAILS (MIN) A

315W 21/4" (57)

424G 2

/4" (57)

DOOR CLEARANCE

Models 315W and 424G can be installed ush with surrounding cabinetry. Depending on the thickness of the overlay door panel, it may be necessary to install the unit

/4" (6) beyond the front surface of adjacent cabinetry to prevent interference when the door is opened to 145°. Refer to the full-scale template on page 23.

subzero.com/specs | 13

Page 14

WINE STORAGE

Custom Panels—427G and 427RG

For models 427G and 427RG, the custom door panel will attach directly to the door with screws through a series of pre-drilled holes. For model 427RG, the drawer panels will attach using mounting brackets supplied with the unit. Refer to the panel requirements chart and integrated panel dimensions.

The thickness of the custom panel can vary. A minimum

/8" (16) thick panel is required, but the thickness can be increased provided it does not exceed the weight limit. The depth of each model is 24"

(610). Allow for panel thickness

when planning the nished opening depth.

CAUTION

When using a 3/4" (19) or thicker panel with a reveal less

than

/4" (6), panel may cause damage to the unit when

door is opened to 105°. Use the built-in 90° door stop.

CAUTION

As reveals between cabinetry and the unit decrease, severe nger pinching can occur while door is closing.

Finish all sides of custom panels. They will be visible when the door/drawer is open.

D-style handles are recommended. Door handles must be located near the edge of the panel opposite the hinge and should be centered top to bottom. Drawer handles must be located near the top edge of each panel. Stainless steel tubular and pro handles are avail able through an authorized Sub-Zero dealer. For local dealer information, visit the nd a showroom section of our website, subzero.com.

An optional lock kit is available for models 427G and 427RG. Review the lock kit instructions to ensure your panels will allow for adequate installation. These instructions are available on our website, subzero.com/specs.

PANEL REQUIREMENTS

PANEL WEIGHT MAX

Door 20 lb (9 kg)

Drawer (427RG) 12 lb (5 kg)

PANEL THICKNESS MIN

All Panels

/8" (16)

14 | Sub-Zero Customer Care 800.222.7820

Page 15

WINE STORAGE

Custom Panels—427G and 427RG

INTEGRATED PANEL DIMENSIONS

427G

/8"

(1927)

427RG

453/8"

(1153)

139/16"

(345)

1611/16"

(424)

Typical panel dimensions are based on an 80" (2032) overall height, 4"

(102) toe kick and

/8" (3) reveals. Panel dimensions must be adjusted accordingly for all other installations. Refer to the illustration for panel heights and the chart below for panel widths.

DUAL INSTALLATION

For dual installations, refer to the illustration for panel heights and the chart below for panel widths.

PANEL WIDTH

MODEL W

427G 2613/16" (681) 427RG 2613/16" (681)

STILES / RAILS (MIN) A B C

427G 21/4" (57) 33/4" (95) 8" (203) 427RG 21/4" (57) 33/4" (95) 3" (76)

PANEL WIDTH

MODEL W

427G 263/4" (679) 427RG 263/4" (679)

STILES / RAILS (MIN) A B C

427G 21/4" (57) 33/4" (95) 8" (203) 427RG 21/4" (57) 33/4" (95) 3" (76)

subzero.com/specs | 15

Page 16

WINE STORAGE

Custom Panels—427G and 427RG

DOOR PANEL HEIGHT

The height of the custom door panel can extend beyond the typical panel height, provided it does not exceed the weight limit. Refer to the illustration below.

25" (635) TO WALL

DECORATIVE VALANCE

CANNOT EXTEND BEYOND

THE FRONT OF THE MOLDING

DECORATIVE VALANCE

REMOVABLE MOLDING

INTEGRATED UNIT

(SIDE VIEW)

OVERALL

HEIGHT

MINIMUM

HEIGHT

/8" (3)

TYPICAL

HEIGHT

OF DOOR

PANEL

11/2"

(38)

DOOR PANEL

HINGE

TOE KICK CLEARANCE

The height of the toe kick area can extend beyond the typical toe kick height, provided it does not exceed the dimensions in the illustration below.

INTEGRATED UNIT

(SIDE VIEW)

HEIGHT

OF PANEL

4" (102) TO 9" (229)

FROM FLOOR

BASE MOLDING

MUST BE

REMOVABLE—

4" (102) MAX

HEIGHT

25/8" (67) TO 4" (102)

KICKPLATE / GRILLE CAN BE ADJUSTED

FORWARD

KICKPLATE / GRILLE

25" (635) TO WALL

Upper valance—side view.

Toe kick—side view.

16 | Sub-Zero Customer Care 800.222.7820

Page 17

WINE STORAGE

Custom Panels—WS-30

FRAMED PANEL

The framed application is an overlay model with framed design features. It is not a separate model.

If the custom panel is thinner than

/4" (6), a ller material

must be added to achieve a proper t. If the panel is thicker

/4" (6), rout an edge around the panel or mount the

than custom panel on a sheet of

/4" (6) thick material and insert

into the channel.

Routing, recessing and optional extended handles may be required for nger clearance. Refer to the full-scale template on page 26.

PANEL REQUIREMENTS

PANEL WEIGHT MAX

Door 75 lb (34 kg) Grille (optional) 13 lb (6 kg)

PANEL THICKNESS MIN

Framed

/4" (6)

FRAMED PANEL DIMENSIONS

WS-30

FRAMED PANELS

PANEL W H

Door 293/4" (756) 699/16" (1767) Grille (optional) 293/4" (756) 815/16" (227)

STILES / RAILS A

Minimum 31/8" (79)

subzero.com/specs | 17

Page 18

WINE STORAGE

Custom Panels—WS-30

OVERLAY PANELS

Overlay panels are typically created by combining a 3/4" (19) custom panel, a .10"

(3) spacer panel and a

/4" (6) backer

panel. Refer to the illustrations below.

PANEL REQUIREMENTS

PANEL WEIGHT MAX

Door 75 lb (34 kg) Grille 13 lb (6 kg)

PANEL THICKNESS MIN

Overlay

SPACER PANEL

CUSTOM PANEL

BACKER PANEL

TRIM

DOOR FRAME

/16" (8) min

/8"

(3)

GLASS

Panel assembly cross section

CUSTOM

PANEL

/4"

(19)

.10" (3)

typical

Panel assembly rear view.

(overlay).

/4" (6)

/8" (16)

SPACER

PANEL

BACKER

PANEL

OVERLAY PANEL DIMENSIONS

WS-30

OVERLAY PANELS

DOOR W H

Overlay Panel 30" (762) 693/4" (1772) Spacer Panel 291/8" (740) 6815/16" (1751) Backer Panel 293/4" (756) 699/16" (1767)

STILES / RAILS A

Minimum 31/4" (83)

GRILLE W H

Overlay Panel 30" (762) 91/4" (235)*

Spacer Panel 29

/8" (740) 85/16" (211)

Backer Panel 293/4" (756) 815/16" (227)

*Panel height may be increased by 7/16" (11) to hide upper main frame. For more information, refer to the built-in panel congurator at subzero.com/trade/panels.

Grille panel dimensions are for standard 84" (2134) overall unit height. For 83" (2108) height, subtract 1" (25) from grille panel height dimensions and for 88" (2235) height, add 4" (102). A specic panel grille must be ordered for an 83" or 88" overall unit height.

18 | Sub-Zero Customer Care 800.222.7820

Page 19

WINE STORAGE

Custom Panels—WS-30

FLUSH INSET PANELS

The ush inset application is an overlay model with ush inset panels. It is not a separate model.

The ush inset design allows custom panels to be installed ush with adjacent cabinets. Similar to overlay, ush inset

panels are typically created by combining a panel, a .10"

(3) spacer panel and a

/4" (6) backer panel.

/4" (19) custom

Refer to the illustrations for overlay panels on the previous page.

For ush inset panels thicker than

/4" (19), a 90° door stop may be required to prevent interference with adjacent cabinets. Refer to the full-scale template on page 29.

PANEL REQUIREMENTS

PANEL WEIGHT MAX

Door 75 lb (34 kg) Grille 13 lb (6 kg)

PANEL THICKNESS MIN

Flush Inset

/8" (16)

FLUSH INSET PANEL DIMENSIONS

WS-30

FLUSH INSET PANELS

DOOR W H

Flush Inset Panel 31" (787) 693/4" (1772) Spacer Panel 291/8" (740) 6815/16" (1751) Backer Panel 293/4" (756) 699/16" (1767)

STILES / RAILS A

Minimum 33/4" (95)

GRILLE W H

Flush Inset Panel 31" (787) 91/4" (235) Spacer Panel 291/8" (740) 85/16" (211) Backer Panel 293/4" (756) 815/16" (227)

subzero.com/specs | 19

Page 20

WINE STORAGE

/4" (6)

REVEAL

/16" (8)

/8" (3)

DOOR DOOR

TOP VIEW

/8"

(16)

/16" (8)

/2"

(13)

/2"(13)

/32"

(2)

/16"

(8)

/16"

(8)

/32"

(4)

GRILLE

DOOR

/4" (6)

REVEAL

/16" (8)

/8" (3)

FLUSH INSET PANEL

SPACER

BACKER

DOOR DOOR

DOOR / DRAWER / GRILLE

TOP VIEWTOP VIEW

SIDE VIEW

CABINETRY

/4" (6)

REVEAL

/16" (8)

/8" (3)

DOOR DOOR

TOP VIEWTOP VIEW

/2"(13)

/32"

(2)

/16"

(8)

/16"

(8)

/32"

(4)

GRILLE

DOOR

/4" (6)

REVEAL

/16" (8)

/8" (3)

DOOR DOOR

TOP VIEWTOP VIEW

Custom Panels—WS-30

FLUSH INSET PANEL OFFSETS

The illustrations provide panel offsets and reveals for model WS-30 in a ush inset application. Refer to the chart below for reference to the illustrations.

PANEL OFFSET

FLUSH INSET ILLUS

Door / Grille Sides A Grille Top B Grille Bottom / Door Top C Door Bottom D

/16"

TOP VIEW

DOOR / DRAWER / GRILLE

BACKER

SPACER

FLUSH INSET PANEL

Illus. A

GRILLE

DOOR

Illus. C

CABINETRY

(8)

/8"

(16)

/16"

(8)

/16"

(8)

SIDE VIEW

/32"

(4)

/32"

(2)

/2"

(13)

/2"(13)

Illus. B

Illus. D

CABINETRY

GRILLE

DOOR /

DRAWER

SIDE VIEW

/16"

(3)

(8)

SIDE VIEW

/16"

(8)

/8"

/2"(13)

/32"

(2)

20 | Sub-Zero Customer Care 800.222.7820

Page 21

WINE STORAGE

Custom Panels—WS-30

DUAL INSTALLATIONS

If two models WS-30 or a model WS-30 and built-in unit are installed side by side, a dual installation kit may be required. Installations without a custom ller strip require a dual installation kit. If a dual installation kit is not specied, a 2"

(51)

ller strip is recommended between units. Dual installations without a ller strip can only be accomplished using two units with opposite hinges. Refer to the illustrations below.

For dual standard installations, panel dimensions are the same as for single installations. Refer to the chart on the previous page. Panel dimensions and offsets for dual ush inset installations are listed on the following pages.

DUAL FLUSH INSET PANEL DIMENSIONS

WS-30

MODEL WS-30

DOOR W H

Flush Inset Panel 301/2" (775) 693/4" (1772) Spacer Panel 291/8" (740) 6815/16" (1751) Backer Panel 293/4" (756) 699/16" (1767)

STILES / RAILS A

Minimum 33/4" (95)

GRILLE W H

Flush Inset Panel 301/2" (775) 91/4" (235) Spacer Panel 291/8" (740) 85/16" (211) Backer Panel 293/4" (756) 815/16" (227)

WITHOUT FILLER STRIP

Opposite hinges.

FILLER STRIP

Same side hinges.

subzero.com/specs | 21

Page 22

WINE STORAGE

/4" (6)

REVEAL

/16" (8)

/8" (3)

DOOR DOOR

TOP VIEW

/8"

(16)

/16"

(8)

/2"

(13)

/2"(13)

/32"

(2)

/16"

(8)

/16"

(8)

/32"

(4)

GRILLE

DOOR

/4" (6)

REVEAL

/16" (8)

/8" (3)

FLUSH INSET PANEL

SPACER

BACKER

DOOR DOOR

DOOR / DRAWER / GRILLE

TOP VIEWTOP VIEW

SIDE VIEW

CABINETRY

/4" (6)

REVEAL

/16" (8)

/8" (3)

DOOR DOOR

TOP VIEWTOP VIEW

/2"(13)

/32"

(2)

/16"

(8)

/16"

(8)

/32"

(4)

GRILLE

DOOR

/4" (6)

REVEAL

/16" (8)

/8" (3)

DOOR DOOR

TOP VIEWTOP VIEW

Custom Panels—WS-30

DUAL FLUSH INSET PANEL OFFSETS

The illustrations provide panel offsets and reveals for model WS-30 in a dual ush inset application. Refer to the chart below for reference to the illustrations.

PANEL OFFSET

DUAL FLUSH INSET ILLUS

Door (hinge) / Grille Sides A Door (handle) Sides B Grille Top C Grille Bottom / Door Top D Door Bottom E

DOOR / DRAWER / GRILLE

BACKER

SPACER

TOP VIEW

CABINETRY

DOOR DOOR

TOP VIEW

DUAL TRIM

FLUSH INSET PANEL

(8)

/16"

5 (16)

/2"

(13)

/8"

Illus. A

CABINETRY

/2"(13)

/8"

/16"

GRILLE

(3)

(8)

SIDE VIEW

Illus. C

DOOR /

DRAWER

/16"

(8)

/16" (8)

Illus. B

Illus. D

/8" (3)

GRILLE

DOOR

/4" (6)

REVEAL

/16"

(8)

/16"

(8)

SIDE VIEW

/32"

(4)

/32"

(2)

/2"(13)

22 | Sub-Zero Customer Care 800.222.7820

Illus. E

SIDE VIEW

/32"

(2)

Page 23

WINE STORAGE

84"

(2134)

24" (610)

OPTIONAL

TOE KICK

CUT-OUT

4" (102)

17/8"(48)

1" (25)

ROUT TO

/8" (3)

FRONT

OF SIDE

PANEL

25/8"

(67)

MAIN

FRAME

SIDE PANEL

ROUTING

1" (25)

17/8" (48)

/8" (3)

/2" (13)

Custom Panels—WS-30

SIDE PANEL

The custom side panel must be a minimum of 24" (610) deep

/2" (13) thick. Routing will be necessary for the side

and panel to t ush against the side of the unit. Refer to the illustrations below.

When installing model WS-30 with a custom side panel, an accessory kit is required. Stainless steel and white enamel side panels are available through an authorized Sub-Zero dealer. For local dealer information, visit the nd a showroom section of our website, subzero.com.

Handle Hardware

Optional stainless steel tubular and pro handles are available through an authorized Sub-Zero dealer. For local dealer information, visit the nd a showroom section of our website, subzero.com.

Refer to the chart below for the length and stud spacing of standard handles for wine storage models.

STANDARD HANDLES

315W, 424G, 424FSG LENGTH STUD SPACING

Tubular 243/16" (614) 161/4" (413) Pro 21" (533) 1911/16" (500)

427RG (DRAWER) LENGTH STUD SPACING

Tubular 243/16" (614) 161/4" (413) Pro 21" (533) 1911/16" (500)

427G, 427RG (DOOR) LENGTH STUD SPACING

Tubular 413/16" (1046) 331/4" (845) Pro 399/16" (1006) 385/16" (973)

WS-30 LENGTH STUD SPACING

Tubular 637/8" (1622) 437/8" (1114) Pro 453/16" (1147) 437/8" (1114)

Side panel dimensions.

Routing detail.

subzero.com/specs | 23

Page 24

WINE STORAGE

Wine Shelf Wood Facing

FULL-SCALE TEMPLATE

The natural cherrywood facing on wine storage shelves can be stained and sealed or replaced with wood more complementary to surrounding cabinetry. Refer to the full-scale template and chart for dimensions.

11/2" (38)

A (WIDTH)

FRONT VIEW SIDE VIEW

/32"

(21)

WIDTH

MODEL W

315W 1015/16" (278) 424G, 424FSG 191/2" (495) 427G, 427RG 2015/16" (532) WS-30 249/16" (624)

/64"

(3)

/64"

(2)

/64"

(9)

/16" (14)

/8"

(16)

MAXIMUM THICKNESS

Wine shelf wood facing.

24 | Sub-Zero Customer Care 800.222.7820

Page 25

WINE STORAGE

Door Clearance—315W and 424G

FULL-SCALE TEMPLATE

To allow for a 145° door opening, the unit should extend

a minimum of

/4" (6) beyond the front surface of adjacent cabinetry. The unit can be installed ush, however, there is potential for interference with the panel if the door is opened past 90°.

UNDERCOUNTER

UNIT

DOOR CLOSED

/2"

(13)

ADJACENT

CABINETRY

1" (25)0"

SCALE

145° door opening (top view).

/4" (19) DOOR PANEL

/4" (6)

/8" (3)

HINGE DETENT

AT 145° OPENING

(DOOR OPENS PAST 145°)

subzero.com/specs | 25

Page 26

WINE STORAGE

Framed Panel—WS-30

FULL-SCALE TEMPLATE

OPTIONAL EXTENDED FULL-LENGTH HANDLE

(25)

/4" (6) FRAMED PANEL

STANDARD FULL-LENGTH HANDLE

(51)

DOOR

(76)

11/4" (32) PANEL

1" (25) PANEL

/4" (19) PANEL

/2" (13) PANEL

Framed panel thickness.

26 | Sub-Zero Customer Care 800.222.7820

Page 27

WINE STORAGE

Overlay and Flush Inset Panels—WS-30

FULL-SCALE TEMPLATE

Overlay and ush inset panels must be a minimum of 5/8"

(16)

thick to support mounting the handle. Panel thickness does not include backer and spacer panel. Mount handle close to the opening edge of the door.

(25)

/4" (6) BACKER PANEL

DOOR

DEPTH OF TUBULAR AND PRO HANDLES

(51)

(76)

11/4" (32) PANEL

1" (25) PANEL

/4" (19) PANEL

.10" (3) SPACER PANEL

Overlay and ush inset panel thickness.

subzero.com/specs | 27

Page 28

WINE STORAGE

237/8"

(606)

TO REAR OF UNIT

OVERALL WIDTH OF UNIT

(32)

(38)

(44)

(0)

(25)

(51)

(57)

(63)

(70)

(76)

(83)

(89)

(6)

(13)

(19)

/4"

(19) THICK

OVERLAY PANEL

(TYPICAL)

/4"

(6) BACKER

PANEL

(25) THICK

PANEL

Overlay Application—WS-30

FULL-SCALE TEMPLATE

90° door opening (top view).

28 | Sub-Zero Customer Care 800.222.7820

1" (25)0"

SCALE

Page 29

WINE STORAGE

Flush Inset Application—WS-30

FULL-SCALE TEMPLATE

24"

(610)

TO BACK WALL

For panels thicker than 3/4" (19), a 90° door stop may be required to prevent interference with adjacent cabinets.

23/16"

(56)

ASSUMES

/4" (19)

FLUSH INSET

PANEL

THICKNESS

11/4" (32)

1" (25) THICK

PANEL

/4" (19) THICK

FLUSH INSET PANEL

(TYPICAL)

/4" (6) BACKER

PANEL

110° door opening (top view).

1" (25)0"

SCALE

subzero.com/specs | 29

Page 30

WINE STORAGE

FILLER STRIP

11/4" (32)

APPROX PROFILE OF

STAINLESS STEEL WRAPPED

DOOR AND HANDLE

Dual Standard Installation—WS-30

FULL-SCALE TEMPLATE

Typical framed, overlay or stainless steel dual installation with ller strip at maximum 110° door opening. Panel thickness may require a 90° door stop.

DOOR

CLOSED

DOOR

OPEN 110°

1" (25)0"

SCALE

Dual standard installation (top view).

30 | Sub-Zero Customer Care 800.222.7820

Page 31

WINE STORAGE

FILLER STRIP

11/2" (38)

/2" (13)

PROFILE OF

(19) FLUSH INSET PANEL

/4"

AND TUBULAR HANDLE

Dual Flush Inset Installation—WS-30

FULL-SCALE TEMPLATE

Typical ush inset dual installation with ller strip at maximum 110° door opening. Panel thickness may require a 90° door stop.

DOOR

CLOSED

DOOR

OPEN 110°

1" (25)0"

SCALE

Dual ush inset installation (top view).

subzero.com/specs | 31

Page 32

Sub-Zero Residential Limited Warranty

FOR RESIDENTIAL USE

FULL TWO YEAR WARRANTY*

For two years from the date of original installation, this Sub-Zero product warranty covers all parts and labor to repair or replace, under normal residential use, any part of the product that proves to be defective in materials or workmanship. All service provided by Sub-Zero under the above warranty must be performed by Sub-Zero factory certied service, unless otherwise specied by Sub-Zero, Inc. Service will be provided during normal business hours.

FULL FIVE YEAR SEALED SYSTEM WARRANTY

For ve years from the date of original installation, this Sub-Zero product warranty covers all parts and labor to repair or replace, under normal residential use, these parts that prove to be defective in materials or workmanship: compressor, condenser, evaporator, drier and all connecting tubing. All service provided by Sub-Zero under the above warranty must be performed by Sub-Zero factory certied service, unless otherwise specied by Sub-Zero, Inc. Service will be provided during normal business hours.

LIMITED TWELVE YEAR SEALED SYSTEM WARRANTY

For twelve years from the date of original installation, Sub-Zero will repair or replace the following parts that prove to be defective in materials or workmanship: compressor, condenser, evaporator, drier and all connecting tubing. If the owner uses Sub-Zero factory certied service, the service provider will repair or replace these parts with the owner paying for all other costs, including labor. If the owner uses non-certied service, the owner must contact Sub-Zero, Inc. (using the information below) to receive repaired or replacement parts. Sub-Zero will not reimburse the owner for parts purchased from non-certied service or other sources.

TERMS APPLICABLE TO EACH WARRANTY

The warranty applies only to products installed for normal residential use. The warranty applies only to products installed in any one of the fty states of the United States, the District of Columbia or the ten provinces of Canada. This warranty does not cover any parts or labor to correct any defect caused by negligence, accident or improper use, maintenance, installation, service or repair.

THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES THAT SUB-ZERO, INC. WILL PROVIDE, EITHER UNDER THIS WARRANTY OR UNDER ANY WARRANTY ARISING BY OPERATION OF LAW. SUB-ZERO, INC. WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM THE BREACH OF THIS WARRANTY OR ANY OTHER WARRANTY, WHETHER EXPRESS, IMPLIED OR STATUTORY.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specic legal rights and you may also have other legal rights that vary from state to state.

To receive parts and/or service and the name of Sub-Zero factory certied service nearest you, contact Sub-Zero, Inc., P.O. Box 44848, Madison, WI 53744; check the contact & support section of our website, subzero.com, email us at customerservice@subzero.com or call 800-222-7820.

*Stainless steel (doors, panels, handles, product frames and interior surfaces) are covered by a limited 60-day parts and labor warranty for cosmetic defects.

*Replacement water lters and air purication cartridges are not covered by the product warranty.

Page 33

Sub-Zero, Sub-Zero & Design, Dual Refrigeration, Constant Care, The Living Kitchen, Great American Kitchens The Fine Art of Kitchen Design, and Ingredients are registered trademarks and service marks of Sub-Zero, Inc. Wolf, Wolf & Design, Wolf Gourmet, W & Design and the color red as applied to knobs are registered trademarks and service marks of Wolf Appliance, Inc. (collectively, the “Company Marks.”) All other trademarks or registered trademarks are property of their respective owners in the United States and other countries.

Page 34

SUB-ZERO, INC. P.O. BOX 44848 MADISON, WI 53744 SUBZERO.COM 800.222.7820

SZWSDG 9/2013