Planning Information
Undercounter Model 249RP
All Refrigerator
odel 249RP
M
erial and model
S
number plate
Removable wire
helves
s
One piece interior Adjustable tempera-
Front venting with
ble kickplate
remova
nterchangeable
I
door hinge
oor closer
D
Stationary door
helves
s
our-sided
F
magnetic gasket
ure control
t
Aside from the full-size units
Sub-Zero offers in its Built-In and
Integrated lines of refrigeration, we
round out our product line-up with
a line of traditional Undercounter
refrigeration which meets all of the
exacting standards you have
grown to expect from Sub-Zero.
This all refrigerator model is ideal
when coupled with an automatic
ice mak
complete bar envir
could be easily used for children to
have their special soda and treats
located in a space that they have
easy access to.
er next to it for the
onment. It also
MODEL 249RP
Undercounter all refrigerator unit
Energy Star qualified
24" (610) depth-true design for a complete built-in look
Door accepts custom panels
Smooth surface, easy-to-clean one piece interior
Inter
changea
ble hinge allows door s
wing to be rever
sed
in the field
Front venting with removable kickplate allows unit to be
serviced from the front
Cycle defrost
Solid core door with magnetic gasket and door closer
UL approved for US and Canada
Two, five and twelve year residential warranty—
anty information can be found on
exclusions a
our website
, subzero.com
pply; w
arr
Dimensions in parentheses are in
millimeters unless otherwise specified.
11/06
1
Planning Information
237/8"
(606)
24"
(610)
253/8"
(645)
3313/16"
(859)
24"
(610)
Undercounter Model 249RP
SPECIFICATIONS
Model 249RP Undercounter All Refrigerator
Overall Width 237/8" (606)
3
Overall Height 33
1
/16" (859)
OPTIONAL DOOR PANELS
White Enamel Steel
Almond Enamel Steel
Classic Stainless Steel
ACCESSORIES
Hinge conversion kit
Overlay panel conver
Accessories are available through your
Sub-Zero dealer. To obtain local dealer
information, visit the Locator section of
our website, subzero.com.
sion kit
Overall Depth 24" (610)
Refrigerator Capacity 4.9 cu ft (139 L)
Minimum Height Required 341/4" (870)
Door Swing Clearance 253/8" (645)
E
lectrical Requirements 115 V AC, 60 Hz, 15 amp circuit
Annual Energy Usage 333 kWh / $ 31
(based on 9.06 cents per kilowatt hour)
Energy Star Qualified
Shipping Weight 117 lbs (53 kg)
Special Note Door accepts custom wood panels
or panels are available as sales accessories
Specifications are subject to change without notice.
OVERALL DIMENSIONS
Dimensions may vary by ±1/8" (3).
Dimensions in parentheses are in
millimeters unless otherwise specified.
2
Planning Information
341/2"
(
876)
ROUGH
OPENING
HEIGHT
24"(
610)
R
OUGH OPENING
W
IDTH
101/2" (267)
7"
(178)
7"
(
178)
E
81/2"
(216)
24"
(
610)
ROUGH
OPENING
D
EPTH
TOP VIEW
FRONT VIEW
LOCATE ELECTRICAL
WITHIN SHADED AREA
Undercounter Model 249RP
INSTALLATION SPECIFICATIONS
DIMENSIONS
Finished Rough Opening Width 24" (610)
Finished Rough Opening Height 341/2" (876)
inished Rough Opening Depth 24" (610)
F
Location of Electrical Within shaded area
Dimensions in parentheses are in
millimeters unless otherwise specified.
See Installation Instructions shipped with unit for detailed specifications.
3
Planning Information
Undercounter Model 249RP
INSTALLATION NOTES
R
efer to the illustrations and specifications
for overall dimensions, finished rough opening
dimensions and installation specifics.
A
115 V AC, 60 Hz, 15 amp fused electrical
supply is required. It is recommended that a
separate circuit, serving only this appliance, be
provided.
All Undercounter models are equipped with a
power supply cord with a 3-prong grounding
plug which must be plugged into a mating
3-prong grounding type wall receptacle. Locate
electrical within the shaded area shown in the
illustration on page 3.
Y
ou must follow all National Electrical Code
regulations. In addition, be aware of local codes
and ordinances when installing your service.
R
efer to the Undercounter Installation
Instructions packed with the appliance, which
provides step-by-step procedures for making
sure the unit is installed properly.
Dimensions in parentheses are in
millimeters unless otherwise specified.
4
Planning Information
P
ANELS
1/4" (
6) THICK OR LESS
1
/4" (6) Panel
Trim reveal
1
/4" (6) min
PANELS THICKER THAN
1
/4" (6)
Trim reveal
1
/4" (6) min
Rout to 1/4" (6)
thickness
W
H
A
4"
Undercounter Model 249RP
FRAMED PANELS
ramed door panel
F
1
(6) thick or less
/4"
Framed door panels must be 1/4" (6) thick around the
perimeter. If the panel is thicker than
1
/4" (6), an edge must
be routed around the panel to ensure a proper fit. Refer to
the illustrations on this page.
IMPORTANT NOTE: The weight of the panel cannot
e
xceed 20 lbs (9 kg).
FRAMED PANEL DIMENSIONS
WIDTH HEIGHT
Door Panel 235/8" (600) 30 " (762)
Handle Recess Location (A)
Maximum P
anel Weight 20 lbs
15" (381)
(9 kg)
Framed door panel thicker than
ramed Door Panel
F
Dimensions in parentheses are in
millimeters unless otherwise specified.
1
/4" (6)
5
Planning Information
5
/16"
(8)
Notch
Required
for Hinge
Clearance
(top and bottom)
1"
(25)
OVERLAY PANEL
Rear View
1
/8" (3)
W
H
Undercounter Model 249RP
Notch required for hinge clearance
OVERLAY PANEL
The overlay door panel design allows for a decorative
panel to cover the door trim for a more seamless appearance. To achieve this look, the most common way is to
work with three panels – the decorative
overlay panel, a 0.10" (3) thick spacer panel and a
3
/4" (19) thick
1
/4" (6)
thick backer panel. An accessory kit (OVERPAN) is required
in order to accommodate the proper installation of the
overlay panel. Additional specifications will be provided
with the accessory kit.
IMPORTANT NOTE: An area must be notched out on the
back edge of the overlay panel at both the top and bottom
hinges to avoid interference as shown in illustration on
this page.
Keep in mind that the Sub-Zero door panels have the
potential for hitting adjacent cabinets and/or countertops
when they are opened. You need to be aware of your
surrounding cabinetry and space limitations when using
the overlay units. Refer to the full-scale illustration on
page 7.
Overlay Door Panel
You will need to follow the exact dimensions and panel
placement for your model to ensure a proper fit. Refer to
the overlay panel specifications below.
IMPORTANT NOTE: The weight of the panel assembly
cannot exceed 20 lbs (9 kg).
IMPORTANT NOTE: The total thickness of all panels for an
overlay model must be at least
5
/8" (16) thick.
O VERLAY PANEL DIMENSIONS
WIDTH
HEIGHT
Door Panel 24" (610) 305/16" (770)
Door Spacer 23" (584) 293/8" (746)
Door Backer 235/8" (600) 30" (762)
Maximum W
eight (panel assembly)
20 lbs
(9 kg)
Dimensions in parentheses are in
millimeters unless otherwise specified.
6
Planning Information
*MODEL 249 OVERLAY
MUST EXTEND A MINIMUM
OF 1-13/16" (46) BEYOND
SURFACE OF ADJOINING
CABINETRY AND MUST BE
1" (25) FROM ADJACENT
CABINETRY TO ALLOW THE
MAXIMUM DOOR SWING
113/16" (46)
3
/4" (19)
1"* (25)
DOOR CLOSED
DOOR PANEL
145˚*
DOOR PANEL
DOOR OPEN @ 145˚
145˚ DOOR OPENING
(
TOP VIEW)
24" (
610)
CABINETRY OPENING
Undercounter Model 249RP
OVERLAY PANEL
Dimensions in parentheses are in
millimeters unless otherwise specified.
7
Loading...