Page 1
Planning Information
Undercounter Model 249FF(I)
All Freezer
odel 249FF
M
odel 249FFI
M
with Ice Maker
erial and model
S
number plate
Automatic ice
aker (249FFI)
m
emovable ice
R
bucket (249FFI)
One piece interior Four-sided
Front venting with
ble kickplate
remova
nterchangeable
I
door hinge
emovable wire
R
shelves
Adjustable tempera-
ure control
t
nterior light
I
agnetic gasket
m
Aside from the full-size units
Sub-Zero offers in its Built-In and
Integrated lines of refrigeration, we
round out our product line-up with
a line of traditional Undercounter
refrigeration which meets all of the
exacting standards you have
grown to expect from Sub-Zero.
If you desire, this unit could be
matched with a 249RP and outfit
a compact New Y
with all the refriger
necessary
. While that is a limited
application, these units can sit
side-by-side in any home bar area
and be a great combination for
those party situations.
This model should be ordered with
or without an ice maker; you
cannot retr
ofit the ice mak
ork apartment
ation space
er.
MODEL 249FF(I)
Undercounter all freezer unit
24" (610) depth-true design for a complete built-in look
Door accepts custom panels
Smooth surface, easy-to-clean one piece interior
Automatic ice maker in Model 249FFI provides an ample
supply of crescent-shaped ice—removable ice bucket
provided
Automatic defrost
Interchangeable hinge allows door swing to be reversed
in the field
ble kickplate allows unit to be
ont venting with remov
r
F
a
serviced from the front
Solid core door with magnetic gasket and door closer
oved for US and Canada
ppr
UL a
wo, five and twelve year residential warranty—
T
exclusions apply; warranty information can be found on
our website, subzero.com
Dimensions in parentheses are in
millimeters unless otherwise specified.
11/06
1
Page 2
Planning Information
237/8"
(606)
24"
(610)
253/8"
(645)
3313/16"
(859)
24"
(610)
Undercounter Model 249FF(I)
SPECIFICATIONS
M
odel 249FF(I) Undercounter All Freezer Unit
Overall Width 237/8" (606)
Overall Height 3313/16" (859)
MODEL OPTIONS
Undercounter Freezer 249FF
Undercounter Freezer
with Automatic Ice Maker 249FFI
OPTIONAL DOOR PANELS
White Enamel Steel
Almond Enamel Steel
Classic Stainless Steel
A CCESSORIES
Hinge conversion kit
Overlay panel conversion kit
Accessories are available through your
Sub-Zer
information, visit the Locator section of
our website
o dealer
. To obtain local dealer
, subzer
o.com.
Overall Depth 24" (610)
Freezer Capacity 4.6 cu ft (130 L)
M
inimum Height Required 34
1
/4"
(870)
Door Swing Clearance 253/8" (645)
Electrical Requirements 115 V AC, 60 Hz, 15 amp circuit
Annual Energy Usage 479 kWh / $ 44
(based on 9.06 cents per kilow
att hour)
Shipping Weight 135 lbs (61 kg)
Special Note Door accepts custom wood panels
or panels are available as sales accessories
Specifications are subject to change without notice.
OVERALL DIMENSIONS
Dimensions may vary by ±1/8" (3).
Dimensions in parentheses are in
millimeters unless otherwise specified.
2
Page 3
Planning Information
341/2"
(876)
ROUGH
OPENING
HEIGHT
24"(610)
ROUGH OPENING
WIDTH
7"
(178)
7"
(178)
E
21/2"
(64)
24"
(610)
ROUGH
OPENING
DEPTH
T
OP VIEW
FRONT VIEW
LOCATE ELECTRICAL
WITHIN SHADED AREA
101/2" (267)
18"
(
457)
WATER SUPPLY
LOCATION
1
/2"
(13)
Undercounter Model 249FF(I)
INSTALLATION SPECIFICATIONS
DIMENSIONS
Finished Rough Opening Width 24" (610)
Finished Rough Opening Height 341/2" (876)
inished Rough Opening Depth 24" (610)
F
Location of Electrical Within shaded area (front view)
Location of W
See Installation Instructions shipped with unit for detailed specifications.
Dimensions in parentheses are in
millimeters unless otherwise specified.
ater Supply (Model 249FFI)
Within shaded area (top view)
3
Page 4
Planning Information
Undercounter Model 249FF(I)
INSTALLATION NOTES
R
efer to the illustrations and specifications
for overall dimensions, finished rough opening
dimensions and installation specifics.
F
or Model 249FFI with automatic ice maker,
rough in the water supply line. Connect a
OD copper line to the house supply, being sure
to use an easily accessible shut off valve
between the supply and the unit.
Do not use self-piercing valves. A saddle
valve kit (4200880) is available from your
Sub-Zero dealer. To obtain local dealer information, visit the Locator section of our website,
subzero.com.
A line filter is required when water conditions have a high sediment content. The ice
maker operates on water pressure of 20 psi
(1.4 bar) to 100 psi (6.9 bar). In some cases a
reverse osmosis water filter system may not be
able to maintain the minimum water pressure
consistently.
1
/4"
A
115 V AC, 60 Hz, 15 amp fused electrical
supply is required. It is recommended that a
separate circuit, serving only this appliance, be
provided.
All Undercounter models are equipped with a
power supply cord with a 3-prong grounding
plug which must be plugged into a mating
3-prong grounding type wall receptacle. Locate
electrical within the shaded area shown in the
illustration on page 3.
You must follow all National Electrical Code
regulations. In addition, be aware of local codes
and ordinances when installing your service.
Refer to the Undercounter Installation
Instructions packed with the appliance, which
provides step-by-step procedures for making
sure the unit is installed properly.
Dimensions in parentheses are in
millimeters unless otherwise specified.
4
Page 5
Planning Information
P
ANELS
1/4" (
6) THICK OR LESS
1
/4" (6) Panel
Trim reveal
1
/4" (6) min
PANELS THICKER THAN
1
/4" (6)
Trim reveal
1
/4" (6) min
Rout to 1/4" (6)
thickness
W
H
A
4"
Undercounter Model 249FF(I)
FRAMED PANELS
ramed door panel
F
1
(6) thick or less
/4"
Framed door panels must be 1/4" (6) thick around the
perimeter. If the panel is thicker than
1
/4" (6), an edge must
be routed around the panel to ensure a proper fit. Refer to
the illustrations on this page.
IMPORTANT NOTE: The weight of the panel cannot
e
xceed 20 lbs (9 kg).
FRAMED PANEL DIMENSIONS
WIDTH HEIGHT
Door Panel 235/8" (600) 30 " (762)
Handle Recess Location (A)
Maximum P
anel Weight 20 lbs
15" (381)
(9 kg)
Framed door panel thicker than
ramed Door Panel
F
Dimensions in parentheses are in
millimeters unless otherwise specified.
1
/4" (6)
5
Page 6
Planning Information
5
/16"
(8)
Notch
Required
for Hinge
Clearance
(top and bottom)
1"
(25)
OVERLAY PANEL
Rear View
1
/8" (3)
W
H
Undercounter Model 249FF(I)
Notch required for hinge clearance
OVERLAY PANEL
The overlay door panel design allows for a decorative
panel to cover the door trim for a more seamless appearance. To achieve this look, the most common way is to
work with three panels – the decorative
overlay panel, a 0.10" (3) thick spacer panel and a
3
/4" (19) thick
1
/4" (6)
thick backer panel. An accessory kit (OVERPAN) is required
in order to accommodate the proper installation of the
overlay panel. Additional specifications will be provided
with the accessory kit.
IMPORTANT NOTE: An area must be notched out on the
back edge of the overlay panel at both the top and bottom
hinges to avoid interference as shown in illustration on
this page.
Keep in mind that the Sub-Zero door panels have the
potential for hitting adjacent cabinets and/ or countertops
when they are opened. You need to be aware of your
surrounding cabinetry and space limitations when using
the overlay units. Refer to the full-scale illustration on
page 7.
Overlay Door Panel
You will need to follow the exact dimensions and panel
placement for your model to ensure a proper fit. Refer to
the overlay panel specifications below.
IMPORTANT NOTE: The weight of the panel assembly
cannot exceed 20 lbs (9 kg).
IMPORTANT NOTE: The total thickness of all panels for an
overlay model must be at least
5
/8" (16) thick.
O VERLAY PANEL DIMENSIONS
WIDTH
HEIGHT
Door Panel 24" (610) 305/16" (770)
Door Spacer 23" (584) 293/8" (746)
Door Backer 235/8" (600) 30" (762)
Maximum W
eight (panel assembly)
20 lbs
(9 kg)
Dimensions in parentheses are in
millimeters unless otherwise specified.
6
Page 7
Planning Information
*MODEL 249 OVERLAY
MUST EXTEND A MINIMUM
OF 1-13/16" (46) BEYOND
SURFACE OF ADJOINING
CABINETRY AND MUST BE
1" (25) FROM ADJACENT
CABINETRY TO ALLOW THE
MAXIMUM DOOR SWING
113/16" (46)
3
/4" (19)
1"* (25)
DOOR CLOSED
DOOR PANEL
145˚*
DOOR PANEL
DOOR OPEN @ 145˚
145˚ DOOR OPENING
(
TOP VIEW)
24" (
610)
CABINETRY OPENING
Undercounter Model 249FF(I)
OVERLAY PANEL
Dimensions in parentheses are in
millimeters unless otherwise specified.
7
Loading...