Sub-Zero 0000055 Installation manual

0000055

648PRO Kickplate Kit

7006506 / Rev A / February, 2009

Page 1 of 1

CONT

AINS:

QTY

DESCRIPTION

1 Kickplate, Front 2 Kickplate Support, Side Bracket 6 Screw, 10-12 x 3/4'' 6 lobe PH 4 Fastener, Dual Lock 949979 1 Instructions

PROCEDURE:

FRONT KICKPLATE INSTALLATION:

1. Remove existing kickplate, then remove kickplate mounting L-brackets from both unit bases (See Figure 1).

2. Attach side bracket kickplate supports in place of kickplate mounting L-brackets just removed (See Figure 2).

3. Attach new front kickplate to side bracket kickplate supports (See Figure 2).

UNIT BASE SIDE PANEL INSTALLATION:

NOTE: The unit base side panels can be used if the unit is free standing or has at least one side exposed.

1. Use dual lock fasteners (2 per side) to attach side panel to side of unit bases (See Figure 3).

Unit Base

Figure 1. Remove Kickplate L-Brackets

Front Kickplate

Unit Base

Figure 2. Attach Side Bracket Kickplate Supports

and New Front Kickplate

Unit Base

Base Side Panel

Dual Lock Fasteners

Figure 3. Base Side Panels