Subaru PKX401T User Manual
PARTS
MAN U AL
Model
PKX401T
PUMP
PUB-EP
Rev. 0813
Robin America, Inc.
905 Telser Road • Lake Zurich, IL 60047 • Phone: 847-540-7300 • Fax: 847-438-5012
e-mail: sales@subarupower.com • www.subarupower.com
PKX401T - 2 - 03-13
© Copyright 2012 Robin America, Inc.
HOW TO USE THIS MANUAL
Ref. Part Number Description Qty Remarks To-From Fig.
Robin engines are identifi ed by MODEL, SPECIFICATION, and CODE NUMBER. For each
model there may be many different versions called specifi cations. Each specifi cation will be
unique in some way. The difference may only be the paint color or it may have a different
type of PTO or some other signifi cant difference.
In order the identify the correct service part number, it is important to confi rm the specifi ca-
tion and code numbers for your engine. The specifi cation and code number together are
know as the PRODUCT NUMBER.
All Robin 4 cycle engines have a Product Number label similar to the label illustrated below.
The Product Number Label has a 15 digit alphanumeric string that consists of the
SPECIFICATION (SPEC) number (11 digits) and the CODE number (4 digits). Please
note the illustration below:
E X 1 7 0 D
SPEC NO. (11 digits) CODE NO. (4 digits)
PRODUCT NO. (15 digits)
PKX401T - 3 - 03-13
X X X X
MANUAL LAYOUT
1
2
1
6
4
3
7
9
2
3
5
4
8
1. SECTION NAME Parts are broadly classifi ed according to their functions.
Refer to the Group Index (table of contents) for respective section name.
2. FIG. No. The FIG. number indexes the reference and part numbers to the illustration. Figure numbers
that vary only in the tens place (i.e..: 700 and 710) are in a group of the same section
(i.e..:Electrical Device Group).
3. REF. No . The Reference number identifi es the part illustration with the corresponding part number in the
part list.
4. SUBASSEMBLY SUBASSEMBLY parts of part assembly are listed below the assembly part. The subassembly
part reference number is indicated by the number led by "-" such as "-1", "-2".
5. PART NUMBER It is the number assigned for sales unit. Use the PART No. when making an order.
6. DESCRIPTION It is designation of the part.
7. QTY. Quantity of each part used for each product.
8. REMARKS This gives a distinctive feature and/or a supplementary comment for the type, the specifi cation,
and the part concerned. It also shows part number(s) interchangeable for the part.
9. FROM-TO This section shows the CODE No. to indicate the history of progress in which improved parts
have been introduced in the product. The FROM-TO CODE No. helps to identify PART No.
being employed in the product concerned. See the examples below:
- The part is used in the product irrespective of CODE No.
2101- The part is used in the products with CODE No. of 2101 and after this number.
- 2100 The part is used in the products with CODE No. of 2100 and before this number.
PKX401T - 4 - 03-13
Ref. Part Number Description Qty Remarks To-From Fig.
GROUP INDEX
Group Name Page
CRANKCASE GROUP ............................................................................... 6
CRANKSHAFT GROUP ............................................................................. 8
INTAKE and EXHAUST GROUP .............................................................. 10
GOVERNOR GROUP .............................................................................. 18
COOLING and STARTING GROUP ......................................................... 22
FUEL, LUBRICANT GROUP .................................................................... 26
CARBURETOR GROUP .......................................................................... 28
ELECTRIC DEVICE GROUP .................................................................. 32
ACCESSORY GROUP ............................................................................. 38
INDEX OF DESCRIPTION SYMBOLS
SYMBOL DESCRIPTION
AY ........................... ASSEMBLY
CP ........................... COMPLETE
EX ........................... EXPORT (from Japan)
FIG. ......................... FIGURE
FR. .......................... FRONT
" ..............................INCH
INCL. ......................INCLUDE
~L ............................ LITER
L= ...........................LENGTH (in. mm)
L.H. (LH) .................LEFT-HAND SIDE
MECH ..................... MECHANICAL
NO (NON) ............... NONE
OPT......................... OPTIONAL
O.S. ........................OVER SIZE
SYMBOL DESCRIPTION
P= ...........................PITCH (in mm)
P.T.O. (PTO) ........... POWER TAKE OFF
REF. ........................ REFERENCE
R.H. (RH) ................ RIGHT HAND SIDE
RR. .........................REAR
STD. .......................STANDARD
SW .......................... SWITCH
T= ........................... THICKNESS (in mm)
UN ..........................UNIT
U.S..........................UNDER SIZE
~V ........................... VOLTAGE
~W .......................... WATT
W/ ........................... WITH
W/O ........................WITHOUT
PKX401T - 5 - 03-13
FIG. 1 CRANKCASE GROUP
FIG. 100
PKX401T - 6 - 03-13
FIG. 1 CRANKCASE GROUP
Ref. Part Number Description Qty Remarks To-From Fig.
10 20B-10102-41 CRANK CASE CP 1 - 100
20 20B-14202-03 VALVE GUIDE 2 - 100
21 056-51000-50 CLIP 1 10.7DX0.9D - 100
26 132-11AA1-10 SEAL-EXH VALVE 1 - 100
28 263-35341-03 RETAINER PLATE 1 11DX17.3DX27DX4.7H - 100
30 044-03500-91 OIL SEAL 1 35DX48DX8B - 100
40 X60-03502-40 BALL BEARING 1 - 100
46 X60-01500-11 BALL BEARING 1 15DX35DX11B - 100
50 277-15011-03 PIPE KNOCK 2 10.3DX8.5DX14L - 100
60 010-50802-90 STUD 2 M8X1.25X30L - 100
70 010-50604-40 STUD 2 - 100
75 044-00800-10 OIL SEAL 1 8DX14DX4B - 100
80 040-11400-30 PLUG 2 M14X1.5X20DX12L - 100
90 021-11400-20 GASKET 2 14.1DX19DX2.3T - 100
210 20B-11001-21 MAINBEARING COVER CP 1 - 100
220 044-03500-91 OIL SEAL 1 35DX48DX8B - 100
230 X60-03502-40 BALL BEARING 1 - 100
235 X60-01500-11 BALL BEARING 1 15DX35DX11B - 100
250 20B-45003-11 GOVERNOR GEAR CP 1 - 100
260 277-41902-01 GOVERNOR SLEEVE CP 1 - 100
285 279-63601-30 OIL GAUGE AY 2 - 100
300 011-00803-40 FLANGE BOLT 8 M8X1.25X17DX38L - 100
610 20B-13002-00 CYLINDER HEAD AY 1 - 100
620 20B-15001-33 GASKET(HEAD) 1 T=0.2 - 100
630 011-01000-40 FLANGE BOLT 4 M10X1.25X19DX75L - 100
631 001-04083-50 FLANGE BOLT 2 M8X1.25X16DX35L - 100
680 20B-15501-01 ROCKER COVER CP 1 - 100
690 20B-16001-03 GASKET(ROCKER COVER) 1 T=0.5 - 100
700 031-00600-10 DOWEL PIN 2 6DX14.8L - 100
710 011-00600-20 FLANGE BOLT 4 M6X1.0X14DX12L - 100
960 20B-99001-37 GASKET SET 1 - 100
PKX401T - 7 - 03-13
FIG. 2 CRANKSHAFT GROUP
FIG. 200
PKX401T - 8 - 03-13
FIG. 2 CRANKSHAFT GROUP
Ref. Part Number Description Qty Remarks To-From Fig.
10 20B-21001-21 CRANK SHAFT CP 1 - 200
50 018-01800-10 FLANGE NUT 1 M18X1.5X31DX14H - 200
70 005-32054-01 WOODRUFF KEY 1 5BX7.5HX19D - 200
210 22B-24101-03 BALANCER SHAFT 1 9284- 200
20B-24101-03 BALANCER SHAFT 1 -9283 200
310 20B-22503-00 CONNECTING ROD AY 1 - 200
320 001-05084-00 FLANGE BOLT 2 M8X1.25X16DX40L - 200
350 263-23301-33 PISTON PIN 1 21DX15DX64.2L - 200
360 20B-23401-H3 PISTON 1 STD - 200
361 20B-23403-H3 PISTON 1 0.25 O.S. - 200
362 20B-23404-H3 PISTON 1 0.50 O.S. - 200
370 20B-23501-07 PISTON RING SET 1 STD - 200
371 20B-23502-07 PISTON RING SET 1 0.25 O.S. - 200
372 20B-23503-07 PISTON RING SET 1 0.50 O.S. - 200
380 056-52100-20 CLIP 2 22.1DX1.4D - 200
PKX401T - 9 - 03-13
FIG. 3 INTAKE and EXHAUST GROUP
FIG. 300
PKX401T - 10 - 03-13
Loading...