StuntCams PV-AC100W, PV-RC200W, PV-RC300W Quick Manual

PV-AC100W

HD WI-FI Power Adapter DVR

Quick Guide

A. Regarding the Device

1. Two Prong Power Supply

2. WI-FI On/Off & Client Button & WI-FI Reset

3. Slide cover

4. Memory Card Slot

5. USB Charge (DC 5V/1.1A)

6. Camera Lens

7. WI-FI & Client LED

REC & Motion Detect & No SD Card LED

B. Insert the SD Card

1) Pull○3down, insert the SD Card correctly, press the SD Card for

take out the SD Card.

C. Change Power Plug Direction

1) Turn ○a to left to loosen, turn ○b to right for 90° to adjust the power plug direction,

Turn ○a right to lock.

D.USB Charge

1)Plug USB cable into slot ○5，and the other end connect to the device going to charge

E. Button Function

1) WI-FI On/Off：Press button ○2 to turn on WI-FI or turn off WI-FI

(Plug WF-AD1 DVR into power plug, then the WI-FI is on and recording.)

3) Reset WI-FI Default：Hold the button ○2 for 10 sec. till blue LED light fast flashing 2times.

F. LED Light

1) Blue LED Light On：WI-FI On

Blue LED Light Off：WI-FI Off

2) Red LED Light Blinking：Please check the SD card. (Can’t recognize the card or lack of memory capacity)

Red LED Light On：Recording

H. APP download QR Code (Scan the QR code to download the APP or directly type &

search “SecurePro” in App store or Google play for installation)

I. Establish WIFI connection (Android)

1) Start your smartphone APP.

1) Choosing the device’s WI-FI which you need to connect.

1) Enter the password.

(The factory initial password is 123456878.)

1) WI-FI connection.

1) Enter WI-FI connection.

* Establish WIFI connection (iOS)

1) Chose settings.

1) Chose Wi-Fi.

1) Choosing the host’s WI-FI which you need to connect.

1) Enter the password.

(The factory initial password is 12345678)

1) Confirm WI-FI has been connected.