Features of the Product
Five inputs : 4 balanced microphone/line inputs, One auxiliary (stereo summing) line input (For ARC 120A & ARC 240A).
Five inputs : 3 balanced microphone/line inputs and one microphone/UB input, One auxiliary (stereo summing) line input (For ARC 120UB &
ARC 240UB).
Thank you for your purchase of the STUDIOMASTER ARC Series mixer amplifier. This amplifier fully incorporate STUDIOMASTER’s
renowned technology and offers high reliability, rock solid stability and superb acoustic characteristics.
2
Switchable phantom power for all mic inputs.
Speaker outputs consist of 70 V, 100 V, 4 ohm, 8 ohm & 16 ohm.
An auxiliary line output can be used for recording or connection to an external mixer amplifier.
Pre-amp & Amp-in RCA connectors to use external devices such as Equalizer.
An Auto-Talk function provides voice-activated priority (VOX) for the Input 1 which overrides the remaining inputs.
Other features include channel level, master volume controls and bass/treble controls, low cut, Level indicators, Power-On Indicator & On/off
switch .
24V DC Operation – Instant transfer to DC Power (car battery) if AC power fails.
USB input with Play, Next, Previous keys & Remote control (For ARC 120UB & ARC 240UB).
Do not operate the unit or immediately disconnect the plug from the mains socket.
1. If there is visible damage to the unit or to the mains cable.
2. If a defect might have occurred after the unit was dropped or suffered a similar accident.
3. If malfunctions occur. In any case the unit must be repaired by skilled personnel.
A damaged mains cable must be replaced by the manufacturer or authorized, skilled personnel only.
Never pull the mains cable when disconnecting the mains plug from the socket, always seize the plug.
For cleaning only use a dry, soft cloth; never use chemicals or water.
No guarantee claims for the unit or liability for any resulting personal damage or material damage will be accepted if the unit is used for other
purposes.
If the units is to be put out of operation definitively, take it to a local recycling plant for a disposal which is not harmful to the environment.
The wires in the mains lead of the power supply unit are coloured in accordance with the following code:
green/yellow or green = earth
blue or black = neutral
brown or red = live
As per the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your
plug.
3. The wire which is coloured brown/red must be connected to the terminal which is marked with the letter L or coloured red.
1. The wire which is coloured green/yellow or green must be connected to the terminal in the plug which is marked with the letter E or by the
earth symbol .
Warning - This appliance must be earthed.
2. The wire which is coloured blue/black must be connected to the terminal which is marked with the letter N or coloured black.
3 Protective Circuit
The protective circuit is provided to prevent damage to the amplifier.
3. In case there is DC at the output terminal.
1. In case of a short circuit at a speaker output.
2. In case of a overheating of the amplifier.
Please observe the following terms in any case:
The unit is suitable for indoor use only. Protect it against dripping water and splash water, high air humidity, and heat (admissible ambient
temperature range 0-40 C). °
Do not place any vessel filled with liquid on the unit, e.g. a drinking glass.
2 Safety Notes
The unit is supplied with hazardous mains voltage (240V~). Leave servicing to skilled personnel only. Inexpert handling may cause an
electric shock hazard. Furthermore, any guarantee claim will expire if the unit has been opened.
Always switch of the unit before making or changing any connections.