MightyMount
STRONGARMhealthcare
Quick Start Installation Guide
What’s Included
A) 1/4” Hex Key
B) (4) Display Thumb Screws (M4 x 8)
C) (4) Display Thumb Screws (M4 x 12)
D) Track cover
Tools You’ll Need
• #1 Phillips screwdriver
• Wire Cutter & Tie Wraps (for securing
keyboard and mouse cabling: see Step 4 for
instructions on accessing prewired USB hub)
Visit strongarmhealthcare.com to view our installation video.
1. Install Mounting Track*
* Refer to track installation instructions
2. Install Onto Track
3. Level and Tighten
Use 1/4” Hex Key to Tighten Four Slider Key Bolts
MightyMount
Quick Start Installation Guide
1
2
STRONGARMhealthcare
4. USB Hub Access
1) Pull out keyboard tray and remove #1 Phillips
head screw from top writing surface, accessed
through key holes in tray
2) Slide top writing surface toward you
5. Install Display
Using (4) M4 x 8 Display Thumb Screws, attach
display to MightyMount. (NOTE: If the M4 x 8 Display
Thumb Screws can’t be threaded suciently to provide a secure
attachment, use the M4 x 12 Display Thumb Screws instead.)
6. Run Cables and Install
Cable Guard
Display cables can be secured to the neck with a
tie wrap fed through the provided holes
7. Install Track Cable Cover
Cut supplied track cover to desired length(s) and
slide into track channels as shown
Vertical Lock
MightyMount
STRONGARMhealthcare
Operation Guide
LOCK UNLOCK
Vertical Adjustment Mounting Rotation
PatientView* Display Rotation
(*On PatientView equipped models)
Pull Out Keyboard Tray
MightyMount
Operation Guide
STRONGARMhealthcare
Display/Keyboard Rotation
Slide Out Mouse Tray (optional) Fold-up Keyboard
Display Tilt
© 2016 STRONGARM Healthcare • 425 Caredean Drive, Horsham, PA 19044 • 215-443-3400 • FAX 215-443-3002
www.strongarmhealthcare.com
Loading...