Strong DiSEqC Positioner v50 User Manaul
User Manual
DiSEqC Positioner v50
Picture similar
n DiSEqC 1.0 / 1.2 Receivers Compatible
n Work with any Receiver via Optional Remote Control
n Compatible with any Actuator or H-H Mount
n 60 Programmable Memories
n Easy Operation and Quick Installation
n Fine-tune Function for Better Reception
n Anti-Noise Circuit to avoid miscounting
n Short Circuit and Overload Protection
n Software Limits Protection
n Auto Turn-off Function
n Re-Calculate (Adjust Shift) Function
n Lock Key Protection
PART 1 • English
1
English
TABLE OF CONTENTS
1.0 SAFETY PRECAUTIONS 2
2.0 OPTIONAL REMOTE CONTROL V.S. RECEIVER 2
3.0 BASIC OPERATION 4
4.0 DIGITS LED DISPLAY 4
5.0 CABLE CONNECTION 5
6.0 FOR ANY RECEIVER 6
7.0 FOR DISEQC 1.2 RECEIVER 8
8.0 TROUBLESHOOTING 1
1
9.0 QUICK TABLE FOR OPTIONAL REMOTE CONTROL 1
3
9.0 DISPLAY DESCRIPTION 14
10.0 SPECIFICACTION 14
* €0.12/Min. from Au strian wired line
* €0.14/Min. from Ge rman wired line
per Januar y 2007
PART 1 • English
2
1.0 SAFETY PRECAUTIONS
1. The ventilation should not be impeded by covering the ventilation openings with items,
such as newspapers, table-cloths, curtains, etc.
2. No naked flame sources, such as lighted candles, should be placed on the apparatus.
3. The apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the apparatus
2.0 OPTIONAL REMOTE CONTROL V.S. RECEIVER
Do you need the optional remote control? It is upon your receiver and how many positions you
want. Please check the following table.
Receiver Type Remote Control Positions Note
DiSEqC 1.2 Not Necessary
Yes / Optional
60
60
Fully controlled by receiver.
Controlled by receiver or optional remote control
DiSEqC 1.0 No
Yes / Optional
4
60
Controlled by receiver.
Controlled by receiver or optional remote control.
No DiSEqC Yes / Necessary 60 Just like stand-alone positioner
PART 1 • English
3
English
Power On/Off
Lock/unlock the positioner
Cancel the previous command
Store a Satellite position
Set software east / west limits
Shift: Adjust all the stored
satellite positions
RESET
Sat. No. keys
(0-9)
Enter Key
Browse stored
Satellite positions
Manually adjust
direction to
East / West
PART 1 • English
4
3.0 BASIC OPERATION
4.0 DIGITS LED DISPLAY
1. The total antenna position Index (pulse counts) is 2,000 (0 ~ 1,999).
2. For Index 0 ~ 999, the lower right dot (1K Indicator) will not light on.
3. For Index 1,000 ~ 1,999, the lower right dot (1K Indicator) will light on.
Manual Buttons
Front View
3 Digit LED Display 1K Indicator
5 V DC (Optional for Optical Sensor
Connect to Receiver and LNB
(Via Coaxial Cable)
Pulse Ground
(Connect to Reed Switch Sensor)
Connect to Motor
(36 V DC Output)
Manual Buttons
East (
West
West
East)
Power /
Store
For South Hemisphere:
The East / West buttons
should be exchanged.
Loading...