LED TV with DVB-T2/C/S2
SRT 43UC4013
SRT 50UC4013
SRT 55UC4013
User Manual
Bedienungsanleitung
Manuel utilisateur
Manuale utente
Manual do Utilizador
Инструкции за употреба
Руководство пользователя
Посібник користувача
Användar Manual
Uživatelská příručka
Navodila za uporabo
Korisnički priručnik
Uputsvo za rukovanje
Používateľská príručka
Használati útmutató
Käyttöohje
Brukermanual
Manual del Usuario
Gebruiksaanwijzing
Brugervejledning
Manual de Utilizare
Instrukcja obsługi
www.strong.tv
Supplied by STRONG France
Represented by STRONG S.A.R.L.
54 rue de Billancourt,
92100 Boulogne-Billancourt, France
Email : support_fr@strong.tv
26 May 2021 13:18
Licenses
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND
NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC
STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER
ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A
VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED
FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE
HTTP://WWW.MPEGLA.COM
This product contains one or more programs protected under international and U.S. copyright laws as
unpublished works. They are condential and proprietary to Dolby Laboratories. Their reproduction
or disclosure, in whole or in part, or the production of derivative works therefrom without the express
permission of Dolby Laboratories is prohibited. Copyright 2003-2009 by Dolby Laboratories. All rights
reserved.
THIS PRODUCT IS SOLD WITH A LIMITED LICENSE AND IS AUTHORIZED TO BE USED ONLY IN
CONNECTION WITH HEVC CONTENT THAT MEETS EACH OF THE THREE FOLLOWING QUALIFICATIONS:
(1) HEVC CONTENT ONLY FOR PERSONAL USE; (2) HEVC CONTENT THAT IS NOT OFFERED FOR SALE; AND
(3) HEVC CONTENT THAT IS CREATED BY THE OWNER OF THE PRODUCT. THIS PRODUCT MAY NOT BE
USED IN CONNECTION WITH HEVC ENCODED CONTENT CREATED BY A THIRD PARTY, WHICH THE USER
HAS ORDERED OR PURCHASED FROM A THIRD PARTY, UNLESS THE USER IS SEPARATELY GRANTED
RIGHTS TO USE THE PRODUCT WITH SUCH CONTENT BY A LICENSED SELLER OF THE CONTENT. YOUR
USE OF THIS PRODUCT IN CONNECTION WITH HEVC ENCODED CONTENT IS DEEMED ACCEPTANCE OF
THE LIMITED AUTHORITY TO USE AS NOTED ABOVE.
English
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, STRONG declares that the devices SRT 43UC4013, 50UC4013 and 55UC4013 are in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: https://www.strong.tv/en/doc
Subject to alterations. In consequence of continuous research and development technical specications, design and appearance of
products may change. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby
Laboratories. The terms HDMI and HDMI High-Denition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks
of HDMI Licensing Administrator, Inc in the United States and other countries. Wi-Fi is a registered trademark of Wi-Fi Alliance®. Netix is a
registered trademark of Netix, Inc. YouTubeTM is a trademark of Google Inc. All product names are trademarks or registered trademarks of
their respective owners.
© STRONG 2021. All rights reserved.
1
To obtain the best performance and safety, please read this manual carefully. Please keep this manual for
future reference.
TABLE OF CONTENTS
1.0 INSTRUCTION 3
1.1 Safety Instructions 3
1.2 Storage 4
1.3 Accessories 4
1.4 Equipment set-up 4
2.0 INSTALLATION 5
2.1 Default PIN code: 0000 5
2.2 Front panel/underside 5
2.3 Rear panel 5
2.4 Side panel 5
2.5 Remote control 6
2.6 Installing the batteries 7
2.7 Using the remote control 7
3.0 FIRST TIME INSTALLATION 7
3.1 DVB-S/S2 installation 8
3.2 DVB-T/T2 installation 8
3.3 DVB-C installation 8
4.0 ELECTRONIC PROGRAMME GUIDE EPG 9
5.0 MENU SETTINGS 9
5.1 Menu control (DTV mode) 9
5.2 Picture menu 9
5.3 Sound menu 10
5.4 Channel 10
5.5 Time menu 12
5.6 Lock 12
5.7 Setup Menu 12
6.0 USB 13
6.1 Reminder when using the USB player 13
6.2 USB menu 14
7.0 TROUBLESHOOTING 17
8.0 SPECIFICATIONS 18
2
1.0 INSTRUCTION
1.1 Safety Instructions
Read all of the instructions before operating the set. Keep these instructions well for later use.
Only use attachments/accessories specied or provided by the manufacturer (such as the
exclusive supply adapter, battery etc.).
Please refer to the information on the exterior back enclosure for electrical and safety
information before installing or operating the apparatus.
To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture.
The ventilation should not be impeded by covering the ventilation openings with items, such
as newspaper, table-cloths, curtains, etc.
The apparatus shall not be exposed to dripping or splashing and no objects lled with liquids,
such as vases, shall be placed on the apparatus.
The mark
instructed person or ready-made leads or cords must be used.
To prevent injury, this apparatus must be securely attached to the oor/wall in accordance with
the installation instructions.
Danger of explosion if the battery is incorrectly replaced. Replace only with the same or
equivalent types.
The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as
sunshine, re or the like.
Excessive sound pressure from earphones and headphones can cause hearing loss.
Listening to music at high volume levels and for extended durations can damage one's hearing.
In order to reduce the risk of damage to hearing, one should lower the volume to a safe,
comfortable level, and reduce the amount of time listening at high levels.
The mains plug or appliance coupler is used as disconnect device, it shall remain readily
operable. When not in use and during movement, please take care of the power cord set, e.g.
tie up the power cord set with cable tie or something like that. It shall be free from sharp edges
or similar which can cause abrasion of the power cord set. When put into use again, please
make sure the power cord is not damaged. In case of damages, please get the power cord
replaced by a similar one with the same specications. The absence of a light indication on
the apparatus does not mean that it is fully disconnected from the mains. To disconnect the
apparatus completely, the mains plug must be pulled out.
Attention should be drawn to environmental aspects of battery disposal.
No naked ame sources, such as lighted candles, should be placed on the apparatus.
To prevent the spread of re, keep candles or other open ames away from this product
at all times.
A USB terminal can provide a maximum of 500 mA.
Equipment with this symbol is a Class II or double insulated electrical appliance. It has
been designed in such a way that it does not require a safety connection to electrical
earth.
Operating Environment
Do not install this equipment in a conned space such as a bookcase or similar unit.
Do not use the set near damp, and cold areas, protect the set from overheating.
Keep away from direct sunlight.
Do not use the set near dust place.
Do not attach candle to accessible opening area, to avoid ammable foreign material from
entering the TV.
indicates a risk of electric shock. The external wires must be installed by an
English
3
WEEE Directive
Correct Disposal of this product. This marking indicates that this product should not be
disposed with other household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it responsibly to
promote the sustainable reuse of material resources. To return your used device, please use the
return and collection systems or contact the retailer where the product was purchased. They can take
this product for environmentally safe recycling.
1.2 Storage
Your device has been carefully checked and packed before shipping. When unpacking it, make sure that
all the parts are included and keep the packaging away from children. We recommend that you keep
the carton during the warranty period, to keep your device perfectly protected in the event of repair or
warranty.
1.3 Accessories
1. 1x installation instructions
2. 1x safety instructions/warranty cards
3. 1x remote control
4. 2x DC1.5V batteries
1.4 Equipment set-up
Fig.1a
Install the display on a solid horizontal surface such as a table or desk. For ventilation, leave a space of at
least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any
objects on top of the set. This apparatus can be used in tropical and/or moderate climates.
Stand assembly instruction
Fig.1b
Carefully place the TV with its front side facing down on a cushioned at surface in order to protect the
TV and the TV screen from damage.
Take out the stand and assemble it to the TV.
Fasten the feet to the bottom of the TV using 4X(14PM) (43’’), 4X (14PM) (50’’) screws, 4X (18PM) (55’’)
screws.
Fig.1c
This user manual provides complete instructions for installing and using this TV. The symbols serve as
follows.
WARNING Indicates warning information.
NOTE Indicates any other additional important or helpful information.
MENU Represents a button on the remote control or the TV.
Move to Represents a menu item within a window.
(Bold characters)
(Italic characters)
4
2.0 INSTALLATION
2.1 Default PIN code: 0000
2.2 Front panel/underside
NOTE: The graphics are for representation only.
1. Power indicator /remote sensor
2. Speakers
3. Buttons: Input source, Menu, V-/V+, CH-/CH+, Standby/ON.
4. Power switch ON/OFF
2.3 Rear panel
NOTE: The graphics are for representation only.
2.3.1 43/50/55 inch
1. OPTICAL Use an RCA cable to connect your TV to a compatible digital amplier or
Home theatre set.
2. HDMI 3 Connect HDMI input signal from a signal source such as DVD, Blu-ray player
or game console.
3. HDMI 2 Connect HDMI input signal from a signal source such as DVD, Blu-ray player
or game console.
4. HDMI 1 (ARC) Connect HDMI input signal from a signal source such as DVD, Blu-ray
player or game console or directly to a Digital Amplier that supports the
ARC function. This input is equipped with the ARC (Audio Return Channel)
feature to implement audio connections and for a full Dolby audio support.
5. VIDEO/AUDIO L/R Connect AUDIO and VIDEO input signals from a signal source such as DVD.
English
Fig.2
Fig.3b
2.4 Side panel
NOTE: The graphics are for representation only.
2.4.1 43/50/55 inch
1. SAT IN Connect a satellite dish to the TV for searching programmes.
2. ANT/CABLE IN Connect a terrestrial antenna or cable connection from your provider to the
TV for searching programmes.
3. CI Connect a Conditional Access Module (CAM).
Fig.3a
5
4. HEADPHONES Speakers will be muted when earphone is plugged in and headphone selected.
5. USB Connect a USB device for playback of multimedia les
2.5 Remote control
1. ! Press to mute or restore the volume.
2. q Press to turn the TV on or standby.
3. (ASPECT)
4. SOUND Change sound mode.
5. (PICTURE) PIC Change picture mode.
6. EPG Press to display the current EPG information in DTV mode.
7. 0 ~ 9 Choose channel directly.
8. LIST Press to enter into the channel list.
9. 9 Press to go back to previous viewed channel.
10. SUB Enable/disable subtitles in DTV/USB mode.
11. TEXT Press to enter or exit the teletext menu.
12. SIZE Enlarge the teletext display. Press this button once to enlarge upper half of
13. MIX Press this button to superimpose the teletext over the TV programme. Press
14. HOLD Press to hold the teletext page on screen without update and changes. Press
15. (REVEAL) TIP In teletext mode, press to reveal the hidden information.
16. INDEX Press this button to display index page.
17. (SUB.PAGE) SUB.P
Press this button to enter or exit subpage mode (if subpage is available}. Press
18. INFO Display information about the current source.
19. FAV Press to view your assigned favourite list or main list channels. Press pq to
20. AUDIO Press to select available audio languages. Selecting audio description, a
21. TV/R Switch between TV and radio.
22. MENU Open the menu options. Step back in some menu options.
23. INPUT Select the input source mode.
24. pq tu Navigate the menu.
25. OK Conrm the selection.
26. BACK Step back in some menu options
27. Exit the current menu.
28. SLEEP Select the sleep time, such as 10 min, 20 min etc.
29. VOL +/ Adjust the volume up or down.
30. CH +/ Change programmes up or down. Big steps in Channel list.
31. PROG Press to enter the Programme Edit menu.
32. u2 Start/Pause playback, press again to continue playback.
33. 3 Press to stop playback.
34. DTV Press to go back to Digital TV.
35. HDMI Press several times to select your HDMI input.
36. 7 Press to play the previous le.
Change aspect ratio.
the screen. Press this button again to enlarge lower half of the screen. Press
this button again to resume to normal screen size.
again to return to normal teletext mode.
again to release the hold state.
the tu buttons to select a subpage.
cycle through your assigned favourite channels, press OK to conrm. To open
the selected list directly, you can press the LIST button.
narrator will describe what is happening on the screen for blind or visually
impaired viewers. Press again to turn it o (depending on broadcast).
Fig.4
6
37. 8 Press to play the next le.
38. 6 Press to fast forward.
39. 5 Press to fast reverse.
40. COLOUR BUTTONS
Press to execute the prompt function in TV or DTV menu mode.
2.6 Installing the batteries
Place 2 x DC1.5V batteries in the battery compartment of the remote control. Make sure to match the
polarity markings inside the compartment.
NOTE: Pictures are only for reference. Actual items may dier.
1. Slide the cover horizontally.
2. Put 2 x DC1.5V batteries in the compartment and make sure the polarity is correct.
3. Slide horizontally to close the cover.
Precautions for using the battery
Improper using of the battery will cause leakage. Carefully follow these instructions.
1. Please note the batteries' polarity to avoid short circuit.
2. When the battery's voltage is insucient which aect the use range, you should replace it with
a new battery. Remove the batteries from the remote control unit if you do not intend to use it
for a long time.
3. Do not use dierent types of batteries (for example Manganese and Alkaline batteries) together.
4. Do not put the battery into re, and charge or decompose the battery.
5. Please dispose batteries abide by relevant environmental protection regulation.
2.7 Using the remote control
Use the remote control by pointing it towards the remote sensor. Items between the remote
control and the remote sensor could block normal operation.
Do not cause the remote control to vibrate violently. Also, do not splash liquid on the remote
control, also do not put the remote control in a high humidity place.
Do not place the remote control under direct sunlight which will cause deformation of the unit
by heat.
When the remote sensor is under direct sunlight or strong lighting, the remote control will not
work. If so, please change the lighting or TV's position, or operate the remote control closer to
the remote sensor.
English
Fig.5
3.0 FIRST TIME INSTALLATION
After all connections have been properly made, switch on your TV. The language selection will appear on
screen. Use pq tu to select the OSD Language of your preference. Conrm with OK on your remote
control.
The next screen appears with the Mode Selection to select Home Mode or Shop Mode. Press OK and tu
to conrm.
Then the next screen appears with the tuner selection. Choose the one you like to use.
7
Scan type Select which input source you want to use: DVB-S to receive satellite
broadcasts (and if you are equipped with a satellite dish), DVB-T to receive
terrestrial broadcasts or DVB-C to receive cable broadcasts.
3.1 DVB-S/S2 installation
Satellite Setting
First select the region where you are using the TV. This important to set time zone correct. Use the
tupq and conrm with OK.
Press pq to highlight the satellite your dish is aimed at. Conrm with OK to mark the satellite. Use
the tupq buttons to change settings for your satellite installation for each specic satellite. The
signal quality bar on the bottom of the screen allows you to ne tune the alignment of your antenna for
optimum reception. Adjust your antenna for maximum possible signal quality. When the signal cannot
be improved anymore, x the dish on this position and press the BLUE Scan button to continue.
Channel Search
Press pq tu to highlight the options of choice and press OK to start the channel search.
Scan Mode Choose between Default (recommended), Blind Scan, Network and Preset
Crypted Select FTA Channels to search Free-To-Air channels only or All Channels to
Service Type Select DTV to search DTV channels only, RADIO to search radio channels only
It is recommended to use the default settings.
Channel List.*
search FTA and Encrypted channels
or All for a complete search.
3.2 DVB-T/T2 installation
Terrestrial Setting
First select the Tune Type by pressing tu to select DTV, ATV or DTV+ATV (DTV to search digital
broadcasts and ATV to search analogue broadcasts). Press q to continue. Press tu to select All
Channels or FTA Channels. Press pq tu to highlight the country that you want to install, then press OK
to start searching.
3.3 DVB-C installation
Cable Setting
Press pq tu to highlight your settings.
Scan type You can select Network Scan or Full. (Default Network Scan for quick search
NOTE: Full scan will have a duration of approximately 20 minutes, depending on
Frequency Please enter (with 0 ~ 9) the main frequency used by your provider in KHz.
Network ID Please enter (with 0 ~ 9) the used Network ID from your provider.
Symbol Please enter (with 0 ~ 9) the used Symbol from your provider. (Ks/s)
8
advised)
your cable network.
NOTE: Please check the settings for your cable system used by your provider!
Press OK to continue.
Crypted Select FTA Channels to search Free-To-Air channels only or All Channels to
search FTA and encrypted channels
Press pq tu to highlight the country that you want to install, then press OK to start searching.
4.0 ELECTRONIC PROGRAMME GUIDE EPG
EPG stands for Digital Electronic Programme Guide. It is supplied by the programme providers and oers
information on broadcasted programmes. You can access it in digital mode by pressing EPG on the
remote control. Press EPG to bring up the EPG interface. Use pq to select a programme. Press EXIT to
stop and return to viewing modes.
Then press the COLOUR BUTTONS for entering the required settings.
GREEN Access extra info of programme
YELLOW Open the reminder setting over view
BLUE Set reminder of selected programme.
5.0 MENU SETTINGS
Below items depend if they are available of select input source. Use INPUT to select another source.
5.1 Menu control (DTV mode)
Press MENU to enter the main menu. Press tu to select an item. Press pq and OK to select the
submenus. Press MENU to exit the item.
5.2 Picture menu
Picture Mode Select the automatic picture control mode. Available choices are Dynamic,
Standard, Mild and User.
Colour Temperature Select the overall colour tone of the picture. Available choices are Cool,
Medium, Warm and User.
Aspect Ratio Select the aspect ratio (display proportions) according to your video signal
type or preference. Available choices are Auto, 4:3,16:9, Zoom1 and Zoom2.
Note: Some options may not be available under some sources.
Noise Reduction Eliminates noise in the picture. Available choices are O, Low, Middle and High.
In the User mode, settings can be changed for Brightness, Contrast, Colour and Sharpness.
English
5.2.1 Contrast/Brightness/Colour Tint/Sharpness
If Picture Mode is set to Personal you are able to change the following settings
Press pq to select an option, then press tu to adjust.
Contrast Adjust the highlight intensity of the picture, but the shadow of the picture is
invariable.
Brightness Adjust the optical bre output of the entire picture, it will aect the dark
region of the picture.
9
Colour Adjust the saturation of the colour based on your own preference.
Tint No function
Sharpness Adjust the peaking in the detail of the picture.
5.2.2 Colour Temperature
In this menu you can change the overall colour cast of the picture.
Press pq to select Colour Temperature, then press OK to enter a sub-menu. Press pq to select the
relevant picture eect (DEFAULT: Cold Normal Warm).
Cold lncrease the blue tone for the white.
Normal Increase the neutral colours for the white.
Warm lncrease the red colour for the white.
5.2.3 Noise Reduction
In this menu you can lter out and reduce the image noise and improve picture quality. Press pq to
select Noise Reduction, then press OK to enter a sub-menu.
O Select to turn o video noise detection.
Low Detect and reduce low video noise.
Middle Detect and reduce moderate video noise.
High Detect and reduce enhanced video noise.
Default Set as Default.
5.3 Sound menu
Sound Mode Select your favourite sound mode for each input. Choices are Standard, Music,
Bass Adjusts the lower frequency of the sound.
Treble Adjusts the higher frequency of the sound.
Balance Control the sound balance between the right and left loudspeaker
Auto Volume Adjust the volume corresponding to the input audio level. Options are On
Surround Sound Turns on the Sound Retrieval System.
AD Switch Turn on the Audio description, you can activate the setting of AD volume.
S/PDIF Mode If you have connected S/PDIF output to digital home audio system. You can
Movie, Sports and User.
(earphone).
and O.
When turn on the audio description, a narrator will describe what is
happening on the screen for blind or visually impaired viewers. (Only if
available in DTV mode.)
select “Auto” to output Dolby audio automatically. If channel have this audio
channel.
5.4 Channel
Press MENU to display the main menu. Press tu to select Channel in the main menu. Press pq to
select the option you wish to adjust in the Channel menu.
10
Press OK to adjust. After nish your adjustment, press OK to save and return to the previous menu.
Below items depend if they are available of select input source. Use INPUT to select another source.
5.4.1 Auto Tuning
Press pq to select Auto Tuning, select the Scan Type and proceed with OK.
5.4.2 Dish Setup
If you use DVB-S/S2 as input source, the Dish Setup menu allow you to set you satellite and belonging
settings as DiSEqC port and LNB type. Afterwards you may start the Auto Tuning or Manual Tuning by
selecting with EPG button the wanted transponder.
5.4.3 DTV Manual Tuning (in DVB-T mode only)
Search and store programmes manually. Press pq to select DTV Manual Tuning. Then press OK to enter
the sub-menu.
Press tu to select a Channel No., and then press OK to start the search. The search stops when a
programme is found and this programme will be stored in the current channel position. If you want to
stop the search, press MENU.
5.4.4 ATV Manual Tuning (in DVB-C mode only)
First select the source type of ATV. Then in the Channel menu, select ATV Manual Tuning and press OK to
access. Highlight and press pq to select Storage To 1 (maybe other number), Sound System and Channel
No.. Then select search and press OK to start the search. Press u for the unit to search towards higher
frequency. Press t for the unit to search towards lower frequency. The search stops when a programme
is found and this programme will be stored in the current channel position. If you want to stop the
search, press MENU.
Current CH Set the channel number
Colour System Select the colour system (Available: AUTO, PAL, SECAM)
Sound System Select the Sound system
Fine-Tune Adjust the frequency of the channel
Search Start the channel search
English
5.4.5 Channel extra settings
Programme Edit Edit the programmes. You can press the COLOUR BUTTONS on the remote
control to skip programmes, rename and delete programmes or move
programmes, and add programmes to the favourite list by pressing FAV .
Signal Information Showing the information of current DTV channel. Only available with DTV
signal.
Cl information Enables the user to watch and change settings of CAM modules and check
values from inserted smart card.
Channel list Select which channel list you like to see if you press on LIST button. Select
between Main List or Favorite List
Schedule List Press pq in the Channel. Select Schedule List, then press OK to enter the sub-
menu. Use the COLOUR BUTTONS to modify your settings.
Software Update (USB) Press OK and use tu to select Ye s if you want to update the software or No
to go back to the main menu. For more information see also chapter 6.2.5.
11
NOTE: To modify the order of the channels contained in the channel list do as
To move a channel, select it by using pq or CH +/ button then press YELLOW button. Now, there are
two dierent ways to move the channel:
Enter the number of the new position by using the 0 ~ 9 buttons on the remote control and conrm with
OK or YELLOW. The selected channel will be automatically moved to the new position.
Press pq button and move the channel in a position of your choice. Conrm with OK
follow: press Menu and OK to select Program Edit (it is also possible access
this option by pressing PROG button on the remote control).
5.5 Time menu
Press MENU to display the main menu. Press t u to select TIME in the main menu. Press p q to do
further adjustments. Press OK to return to the previous menu.
Clock The time is automatically obtained from the channel transmission and
Time Zone Press p q t u to select Time Zone.
Sleep Timer Press p q to select Sleep Timer. Available Options: O, 10 min., 20 min., 30
Auto Standby This function allows you to set the automatic shutdown of your TV. Choose
OSD Timer This function allows you to choose how long the info banner is displayed.
doesn't have to be set manually. Should this function not be provided by the
broadcaster, it is possible to set it by pressing OK and set date and time by
pressing pq tu.
min., 60 min., 90min., 120 min.,180 min. and 240 min..
between 2H, 3H, 4H or O to disable this function.
Choose between 5s, 15s or 30s.
5.6 Lock
Press MENU to display the main menu. Press t u to enter the Lock menu settings. Press p q to select
the options. The following options are available:
System Lock This option allows you to enable or disable the password protection. Press OK
Set Password The default password is 0000, to customize the password press OK and follow
Channel Lock This option allows you to prevent viewing of one or more channels. Press OK
Parental Guidance Press OK to enter and set the age for suitable programmes for children, then
to set this function On or O.
the instruction within the menu.
to display the channel list and select with pq the channel you want to be
locked. Press GREEN to lock it. Consider the same procedure to lock other
channels if needed.
press pq.
5.7 Setup Menu
Language Select the Menu language of your choice. The default setting is English. Press
Audio Languages Press tu to select Primary for main audio track or Secondary next audio
12
pq to select the menu language.
channel if rst is not available. Press pq t u to select your chosen Audio
Language, then press OK.
Subtitle Language Press pq tu to select your chosen Subtitle Language, then press OK
Country This item shows the region you been selected by rst time you install the TV.
Restore Factory Default Press pq to select this function, by pressing OK and enter the PIN code. You
will reset all the settings contained in the main menu and deleted all installed
channels. TV will go back to First Time Installation See chapter 3.
Version Information Your current software version is displayed.
HDMI CEC See chapter 5.7.1.
Home /Shop Switch between Home modes and Shop modes with default more brightness
and Auto standby to o.
USB Clone This option allows you to copy you channel list to USB device as back up.
Insert USB device and select Back up. To load this later back into TV, select
“Restore”.
5.7.1 HDMI CEC
CEC Control Press t u to turn the HDMI CEC On or O.
Audio Receiver Press t u to turn the Audio Receiver On or O.
Device Auto Power O Press t u to turn on this feature. When nished turn o your TV. The
connected device will turn o automatically.
TV Auto Power On Press t u to select this option. When nished, turn on the connected device.
The TV will switch on automatically.
Device List Press OK to open the main menu of device.
Device Menu Access the device menu.
6.0 USB
English
6.1 Reminder when using the USB player
Some USB storage devices may not be compatible to operate smoothly with this TV.
Back up all of the data in the USB storage device in case data is lost due to an unexpected accident.
STRONG does not assume any liability for the losses by misuse or malfunction. Data backup is
consumer's responsibility.
For large le sizes, the loading speed may be slightly longer.
The recognition speed of a USB storage device may depend on each device.
When connecting or disconnecting the USB storage device, make sure the TV is not in USB mode
otherwise the USB storage device or the les stored in it may be damaged.
Please use only a USB storage device which is formatted in FAT16, FAT32, NTFS (playback only) le
system provided with the Windows operating system. In case of a storage device formatted as a dierent
utility programme which is not supported by Windows, it may not be recognized.
When using a USB Hard Disk Drive which is not powered independently, ensure its power does not
exceed 500 mA. Otherwise the TV system will change into standby mode, and you must pull out the USB
Hard Disk and restart the TV system.
An “Unsupported File” message will be displayed if the le format is unsupported or the le is corrupted.
FHD big picture needs longer time to process, which is not caused by the TV. Please be patient.
13
This TV may not support some multimedia les changed and upgraded as the change of the encoding
format or other technical aspects advances.
Please refer to chapter 9. Appendix for a list of supported le formats for USB playback.
6.2 USB menu
Press SOURCE and select USB. You can view movie, music and photo les from your USB storage devices.
Connect a USB storage device to the USB input terminal and select the types of media on the home
page: Movie, Music, Photo and text. Press OK, the screen will show the connected USB device, press OK
again to view the le folders and les. Press pq or tu to select a folder, press OK to open the folder
and select the les. Highlight the one you want to play or watch or press directly u2 to start playing
directly. Press 3 to stop playing and return to upper lever folder. Continuously press RETURN to go back
to upper level folder. Repeat again to select and play another media type.
NOTE: By choosing one of the three media types, for example Movie, the folders
inside will display only video les and no other formats.
6.2.1 Play movies
Fig.6
During playback, press INFO or OK to display/exit the menu bar (Fig.6). Press the USB control buttons
on the remote control to do relevant operations.
Play & Pause/Stop/Prev./Next
Fast Reverse/Fast Forward Press and hold 5 6 for seconds to draw the playing progress as your desire,
Play Mode Highlight the corresponding icon and press OK to switch to another play
Information Highlight the corresponding icon and press OK to view the information of the
Aspect Ratio Highlight the button and press OK to select the display mode.
Press u2 to play or pause the playback. Press 3 to stop playing. Press
7 8 to play the previous or the next video le. Press INFO and use tu to
highlight the corresponding icon on the control bar, then press OK. The TV
will response accordingly.
then press u2 to start the playing from the new position.
mode.
playing video.
6.2.2 Play music
Fig.7
Press INFO or OK to display/exit from the menu bar (Fig.7). Press the USB control buttons on the
remote control to do relevant operations.
Play & Pause/Stop/Previous/Next
Fast Forward/Fast Reverse Press and hold 5 6 for seconds to draw the playing progress as you wish,
Press u2 to play or pause the playback. Press 3 to stop playing. Press
7 8 to play the previous or the next music le. Press tu to highlight
the corresponding icon on the control bar, and then press OK. The TV will
response accordingly.
then press u2 on the remote control to start playing from the new position.
14
Repeat Highlight the icon and press OK. You can select 3 dierent modes: None to
disable the function, 1 to repeat one track only and All to repeat the entire list
once it is nished.
Information Highlight the icon and press OK to check the information of the playing
music.
English
15
NOTE:
If one (or more) le(s) of the play list is selected, the buttons 7 8 will play
only selected les.
This menu only shows supported les.
Files with other le extensions are not displayed, even if they are saved on the
same USB storage device.
An over-modulated mp3 le may cause some sound distortion during
playback.
This TV supports lyrics display (in English). The maximum number of
characters per line is 48.
The le name of music and lyrics must be the same in order to display lyrics
while the music is playing.
If you want to show the associated lyrics on the screen with the music, you
must store these in the same folder using the same le name with “.Irc” le
extensions.
6.2.3 Browse photos
Fig.8
Press during viewing INFO or OK to display/exit from the menu bar (Fig.8). Press the USB control
buttons on the remote control to do relevant operations.
Play & Pause/Stop/Previous/Next
Repeat Highlight the icon and press OK. You can select 3 dierent modes: None to
Info Highlight the button and press OK to check the information of the shown
Rotate Highlight the icon in the menu bar and press OK to rotate the picture 90
Zoom In/Zoom Out Highlight the icon on the menu bar and press OK to zoom in or zoom out of
Move View When the image is magnied, use this function for convenient check.
Press u2 to play or pause the playback. Press 3 to stop playing. Press 7 8
to show the previous or the next picture. Press tu to highlight the icon on
the control bar, and then press OK. The TV will response accordingly.
disable the function, 1 to repeat one track only and All to repeat the entire list
once it is nished.
photo.
degrees clockwise or counter clockwise.
the image.
Highlight this icon, press OK, then press tu pq to move the image.
NOTE: The move function
is only available when the image is enlarged.
6.2.4 Browse text documents
Press tu to select Te xt in the main menu. Then press tu to select the drive disk you choose to watch
and OK to enter. Select the le you want to display by using pq tu and conrm with OK. Quit step by
pressing OK. Press tu to select return and go back to previous menu.
16
6.2.5 Software update via USB
From time to time you can check if there is an improved software version available. This can be viewed
and downloaded from our website www.strong.tv. Search the model number on our website's service
support section. If there is an improved software version you can download the le and copy it to the
root of a USB device. Then press pq button to select Soft ware Update (USB) from the SETUP menu
on your TV. Afterwards plug your USB device into the USB slot and press OK to update the respective
software. Conrm with Yes using tu. When the update is completed, remove the USB stick, disconnect
your device from the main power supply and plug in again.
7.0 TROUBLESHOOTING
Before calling a service technician, review following information for possible causes and solutions for the
problem you are experiencing. If the TV does not work properly after checking it, please contact your
local service line or STRONG dealer. Alternatively, you can send a support mail via our website www.
strong.tv.
Problem Possible cause and solution
No picture,no sound 1. Check if the fuse or circuit breaker is working.
No colour 1. Change the colour system.
The remote control does
not work
No picture, normal sound 4. Adjust the brightness and contrast.
Normal picture, no sound 1. Press the volume up button to increase the volume.
Unorderly ripples on the
picture
Snowy dots, blocking and
interference
Radio frequency
interference
2. Plug another electrical device into the outlet to make sure it is
working or turned on.
3. The power plug is in bad contact with the outlet
4. Check the signal source.
2. Adjust the saturation.
3. Try another channel. Black-white programme may be received.
1. Change the batteries.
2. The batteries are not installed correctly.
3. Main power is not connected.
5. Broadcasting failure may happen.
2. The volume is set to mute, press ! to restore the sound.
3. Change the sound system.
4. Broadcasting failure may happen.
It is usually caused by local interference, such as cars, daylight lamps and
hair driers. Adjust the antenna to minimize the interference.
If the antenna is located in the fringe area of a television signal where
the signal is weak, the picture may be marred by dots, show blocking
or break-ups. When the signal is extremely weak, it may be necessary to
install a special antenna to improve the reception.
1. Adjust the position and orientation of the indoor/outdoor
antenna.
2. Check the connection of the antenna.
3. Fine tune the channel.
4. Try another channel. Broadcasting failure may happen.
This interference produces moving ripples or diagonal streaks, and in
some case, loss of contrast in the picture. Find out and remove the radio
interference source.
English
17
Problem Possible cause and solution
Playback of video is
causing picture freeze/
macro blocks or similar
distortion, especially on HD
content.
No signal or weak signal,
intermittent reception.
Bad picture/blocking error
during heavy rain.
Read/write speed of your USB device could be too low. Make sure to use
a USB storage device with sucient speed and space. Pen drives (USB
sticks) may not support sucient speed.
a) Cables might have loosened; moisture might have entered into
cables or connectors, heavy rain at present or heavy storm at
present.
Check the cable connections, LNB and other equipment
connected between the LNB and the receiver, or peak the dish.
Wait for rain/storm to subside. Ask a local satellite specialist for
advice.
b) The satellite dish is not pointing at the (correct) satellite(s).
Adjust the dish. Ask a local satellite specialist for advice.
c) Satellite dish is too small, trees or buildings in path.
Change to a larger dish or change position of dish.
d) Signal is too strong, dish is oversized.
Connect a signal attenuator to the LNB input. Ask a local satellite
specialist for advice.
Heavy rain will attenuate satellite signals, below a certain level blocking
will occur.
Make sure your dish installation is up to standards to minimize rain
eects. When in doubt, ask a local satellite specialist for advice.
NOTE: If the problem persists after these solutions, please contact your local
support centre or send a support mail via our website www.strong.tv.
8.0 SPECIFICATIONS
Audio
Audio Output: 2 * 10 W
Video
Channel coverage: DVB-T2: 174 MHz-230 MHz; 470 MHz-860 MHz
DVB-C: 50-858 MHz
DVB-S2: 950 MHz-2150 MHz
System: DTV: DVB-T2, DVB-S2, DVB-C
ATV: PAL/SECAM (BG/DK/1)
AV: PAL, NTSC
Connectors 43” 50” 55”
1x ANT/CABLE IN
1x SAT IN
1x CI
1x AUDIO L/R IN
1x VIDEO IN
3x HDMI
18
1x S/PDIF (optical)
1x USB
1x HEADPHONES
General Data
Operating voltage: 100 ~ 240 V AC 50/60 Hz
Power consumption: 43” max. 88 W, typ. 68 W
50” max. 120 W, typ. 90 W
55” max. 150 W, typ. 108 W
Power consumption in standby: 43”, 50”, 55”: <0.5 W
Operating temperature: +2 °C ~ +35 °C
Storage temperature: -15 °C ~ +45 °C
Operating humidity: 25% ~ 70% RH
Storage humidity: 10% ~ 50% RH
Dimensions (WxDxH) in mm: 43“: 966 x 231 x 621.5
50“: 1123.4 x 230.5 x 710.7
55“: 1238 x 264 x 777
Net-weight: 43”: 7,65 kg
50”: 10,5 kg
55”: 13 kg
English
19
Loading...