SMART ANDROID TV with DVB-T2/C/S2
32HC5433 – HD
32HC5433U – HD
43FC5433 – FHD
42FC5433U - FHD
User Manual
Bedienungsanleitung
Manuel utilisateur
Manuale utente
Manual do Utilizador
Инструкции за употреба
Руководство пользователя
Посібник користувача
Användar Manual
Uživatelská příručka
Navodila za uporabo
Korisnički priručnik
Uputsvo za rukovanje
Používateľská príručka
Használati útmutató
Käyttöohje
Brukermanual
Manual del Usuario
Gebruiksaanwijzing
Brugervejledning
Manual de Utilizare
Instrukcja obsługi
www.strong.tv
Supplied by STRONG Austria
Represented by STRONG Ges.m.b.H.
Teinfaltstraße 8/4.Stock
A-1010 Vienna, Austria
Email : support_fr@strong.tv
06 Oct 2021 18:57
Licenses
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND
NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC
STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER
ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A
VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED
FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE
HTTP://WWW.MPEGLA.COM
This product contains one or more programs protected under international and U.S. copyright laws as
unpublished works. They are confidential and proprietary to Dolby Laboratories. Their reproduction
or disclosure, in whole or in part, or the production of derivative works therefrom without the express
permission of Dolby Laboratories is prohibited. Copyright 2003-2009 by Dolby Laboratories. All rights
reserved.
THIS PRODUCT IS SOLD WITH A LIMITED LICENSE AND IS AUTHORIZED TO BE USED ONLY IN
CONNECTION WITH HEVC CONTENT THAT MEETS EACH OF THE TH REE FOLLOWING QUALIFI CATIONS: (1)
HEVC CONTENT ONLY FOR PERSONAL USE; (2) HEVC CONTENT THAT IS NOT OFFERED FOR SALE; AND (3)
HEVC CONTENT THAT IS CREATED BY THE OWNER OF THE PRODUCT. THIS PRODUCT MAY NOT BE USED
IN CONNECTION WITH HEVC ENCODED CONTENT CREATED BY A THIRD PARTY, WHICH THE USER HAS
ORDERED OR PURCHASED FROM A THIRD PARTY, UNLESS THE USER IS SEPARATELY GRANTED RIGHTS TO
USE THE PRODUCT WITH SUCH CONTENT BY A LICENSED SELLER OF THE CONTENT. YOUR USE OF THIS
PRODUCT IN CONNECTION WITH HEVC ENCODED CONTENT IS DEEMED ACCEPTANCE OF THE LIMITED
AUTHORITY TO USE AS NOTED ABOVE.
English
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, STRONG declares that the devices 32HC5433, 43FC5433, 32HC5433U, 42FC5433U is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: https://www.strong.tv/en/doc
Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of
products may change. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby
Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks
of HDMI Licensing Administrator, Inc in the United States and other countries. Wi-Fi is a registered trademark of Wi-Fi Alliance®. Netflix is a
registered trademark of Netflix, Inc. YouTubeTM is a trademark of Google Inc. All product names are trademarks or registered trademarks of
their respective owners.
© STRONG 2021. All rights reserved.
1
To obtain the best performance and safety, please read this manual carefully. Please keep this manual for
future reference.
TABLE OF CONTENTS
1.0 INSTRUCTION 3
1.1 Safety Instructions 3
1.2 Storage 4
1.3 Accessories 4
1.4 Equipment set-up 4
2.0 INSTALLATION 4
2.1 Default PIN code 4
2.2 Front panel 5
2.3 Rear panel 5
2.4 Remote controls 6
2.5 Installing the batteries 8
2.6 Using the remote controls 8
3.0 FIRST TIME INSTALLATION 9
4.0 HOME SCREEN 11
4.1 Inputs 12
4.2 Network & Internet 13
5.0 LIVE TV USAGE 15
5.1 Channel installation 15
5.2 Watching TV channels 19
5.3 Electronic Program Guide (EPG) 20
5.4 TV Menus 20
6.0 SMART TV POSSIBILITIES 24
7.0 SYSTEM SETTINGS 24
7.1 Settings main menu 25
7.2 Device Preferences menu 25
8.0 MULTIMEDIA 26
8.1 Reminder when using the USB storage devices 26
8.2 Multimedia Player 26
9.0 TROUBLESHOOTING 31
10.0 SPECIFICATIONS 33
2
1.0 INSTRUCTION
1.1 Safety Instructions
Read all of the instructions before operating the set. Keep these instructions well for later use.
Only use attachments/accessories specified or provided by the manufacturer (such as the
exclusive supply adapter, battery etc.).
Please refer to the information on the exterior back enclosure for electrical and safety
information before installing or operating the apparatus.
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
The ventilation should not be impeded by covering the ventilation openings with items, such as
newspaper, table-cloths, curtains, etc.
The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
The mark
instructed person or ready-made leads or cords must be used.
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with
the installation instructions.
Danger of explosion if the battery is incorrectly replaced. Replace only with the same or
equivalent types.
The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as
sunshine, fire or the like.
Excessive sound pressure from earphones and headphones can cause hearing loss.
Listening to music at high volume levels and for extended durations can damage one's hearing.
In order to reduce the risk of damage to hearing, one should lower the volume to a safe,
comfortable level, and reduce the amount of time listening at high levels.
The mains plug or appliance coupler is used as disconnect device, it shall remain readily
operable. When not in use and during movement, please take care of the power cord set, e.g. tie
up the power cord set with cable tie or something like that. It shall be free from sharp edges or
similar which can cause abrasion of the power cord set. When put into use again, please make
sure the power cord is not damaged. In case of damages, please get the power cord replaced
by a similar one with the same specifications. The absence of a light indication on the apparatus
does not mean that it is fully disconnected from the mains. To disconnect the apparatus
completely, the mains plug must be pulled out.
Attention should be drawn to environmental aspects of battery disposal.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
To prevent the spread of fire, keep candles or other open flames away from this product
at all times.
A USB terminal can provide a maximum of 500 mA.
Equipment with this symbol is a Class II or double insulated electrical appliance. It has
been designed in such a way that it does not require a safety connection to electrical
earth.
Operating Environment
Do not install this equipment in a confined space such as a bookcase or similar unit.
Do not use the set near damp, and cold areas, protect the set from overheating.
Keep away from direct sunlight.
Do not use the set near dust place.
Do not attach candle to accessible opening area, to avoid flammable foreign material from
entering the TV.
indicates a risk of electric shock. The external wires must be installed by an
English
3
WEEE Directive
Correct Disposal of this product. This marking indicates that this product should not be
disposed with other household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it responsibly to
promote the sustainable reuse of material resources. To return your used device, please use the
return and collection systems or contact the retailer where the product was purchased. They can take
this product for environment-safe recycling.
1.2 Storage
Your device has been carefully checked and packed before shipping. When unpacking it, make sure that all
the parts are included and keep the packaging away from children. We recommend that you keep the carton
during the warranty period, to keep your device perfectly protected in the event of repair or warranty.
1.3 Accessories
1x installation instructions
1x Safety Instructions/Warranty Cards
2x remote controls*
2x AA batteries
2x AAA batteries
* You can choose to use both remote controls or just one
1.4 Equipment set-up
Fig. 1
Install the display on a solid horizontal surface such as a table or desk. For ventilation, leave a space of
at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any
objects on top of the set. This apparatus can be used in tropical and/or moderate climates.
Fig. 1
This user manual provides complete instructions for installing and using this TV. The symbols serve as follows:
WARNING Indicates warning information.
NOTE Indicates any other additional important or helpful information.
MENU Represents a button on the remote control or the TV.
Move to Represents a menu item within a window.
(Bold characters)
(Italic characters)
2.0 INSTALLATION
2.1 Default PIN code
Access to the LiveTV app to set parental control
4
2.2 Front panel
NOTE: The graphics are for representation only.
1. Power indicator /remote sensor
2. Speakers
2.3 Rear panel
NOTE: The graphics are for representation only.
Fig. 2
English
Fig. 3a
1. Scans up/down through the channel list. Within the menu system, the
buttons operate with equal function of the buttons on the remote and
adjust menu controls.
2. Increases/decreases the volume. Within the menu system, the buttons
operate with equal function of the buttons on the remote and adjust
menu controls.
3. q/Menu Turns the TV on or in standby. If the TV is on, press the button to display
Source Select. In some menus, press to return to the previous menu. Long
press for 3 seconds to display NAV menu.
NOTE: The graphics are for representation only.
32”, 43”
1. LAN Connect to your Internet router to access the internet/apps.
2. S/PDIF (optical) Use an optical cable to connect your TV to a compatible digital amplifier or
Home theatre set.
3. Mini AV IN To connect your video camera or other device using 3.5 mm AV cable to your
TV to play videos on your TV screen.
4. ANT IN Connect a coaxial cable to receive signal from the DVB-T/T2 antenna or
DVB-C cable.
5. SAT IN Connect a coaxial cable to receive signal from the Dish LNB.
6. HDMI 3 Connect HDMI input signal from a signal source such as DVD, Blu-ray player or
game console.
7. USB 2.0 2x USB 2.0 ports.
8. HEADPHONE Headphone or Earphone audio output, speakers will be muted when
earphone is plugged in and headphone selected.
9. HDMI 2 (ARC) Connect HDMI input signal from a signal source such as DVD, Blu-ray player
or game console or directly to a Digital Amplifier that supports the ARC
function. This input is equipped with the ARC (Audio Return Channel) feature
to implement audio connections and for a full Dolby Audio support.
10. CI Insert a Conditional Access Module (CAM).
11. HDMI 1 Connect HDMI input signal from a signal source such as DVD, Blu-ray player
or game console.
Fig. 3b
5
42”
1. USB 2.0 2x USB 2.0 ports.
2. LAN Connect to your Internet router to access the internet/apps.
3. SAT IN Connect a coaxial cable to receive signal from the Dish LNB.
4. ANTENNA IN Connect a coaxial cable to receive signal from the DVB-T/T2 antenna or DVB-C
5. S/PDIF (optical) Use an optical cable to connect your TV to a compatible digital amplifier or
6. HDMI 2 (ARC) Connect HDMI input signal from a signal source such as DVD, Blu-ray player
7. HDMI 1 Connect HDMI input signal from a signal source such as DVD, Blu-ray player
8. CI Insert a Conditional Access Module (CAM).
9. Mini AV IN To connect your video camera or other device using 3.5 mm AV cable to your
10. HEADPHONE Headphone or Earphone audio output, speakers will be muted when
cable.
Home theatre set.
or game console or directly to a Digital Amplifier that supports the ARC
function. This input is equipped with the ARC (Audio Return Channel) feature
to implement audio connections and for a full Dolby Audio support.
or game console.
TV to play videos on your TV screen.
earphone is plugged in and headphone selected.
NOTE: If the TV turns off when you plug a cable to any connector, just turn it on
again.
2.4 Remote controls
This TV model supplies with 2 Remote control units (RCU).
First one is simpler and more modern. It has minimalistic design, small quantity of buttons and is good
enough for everyday usage. This is IR and RF RCU. This meaning, that you could use it as traditional IR
RCU, pointing it on your TV and, if you made pairing of it via Bluetooth wireless connection, you will be
able to control your TV without pointing RCU directly on your TV. Please refer to Chapter 3 and other
chapters for more information how to make pairing of this RCU with your TV
Fig. 4a
1. q Press to turn the TV on or standby.
2.
Press to mute or restore the volume.
3.
Opens the smart menu.
Press to access the TV settings
4.
5.
Select the input source mode.
6. Navigate the menu.
7. OK Confirm the selection.
8.
Press to go back to previously viewed channel. In menu: Back to previous menu.
Open the menu options.
9.
10.
Enter the home desktop.
Open the keyboard**.
11.
12.
+/ Adjust the volume up or down.
13. NETFLIX Press for direct access to Netflix*.
14. YouTube Press for direct access to YouTube.
Press to activate the voice control function***.
15.
* Membership is not included. Netflix is available in selected countries. Streaming Netflix requires to set up an account. Broadband Internet
required. See www.netflix.com/TermsOfUse for details.
6
** button call on-screen keyboard, which contain additional buttons, not physically present on this RCU, as 0 ~ 9, ZOOM, Teletext,
Guide, Subtitle, Info, Exit, Lang, List, CH + / CH - and COLOUR BUTTONS.
Try searching for “sci-fi movies”
1
6:28
English
Apps
YouTube
Finish setting up your TV
Add a Google Account to make the most of your TV
Details
1 2 3
4 5 6
7 8 9
Zoom 0 Teletext
Guide Subtitle Info
Exit Lang List
CH+ CH-
***Voice control and some other functions could work only when this RCU paired with your TV.
Fig. 4b
Second RCU is quite big and traditional. It is only IR and has complete list of buttons to control your TV.
1. q Press to turn the TV on or standby.
2.
Press to mute or restore the volume.
3. 0 ~ 9 Choose channel directly.
4. FAV Press to view your assigned favourite channels. Press to cycle
through your favourite channels, press OK to confirm.
5. LIST Press to enter the channel list.
6. +/ Adjust the volume up or down.
7. TV Switch back to the TV mode.
Opens the smart menu.
8.
9. P +/ Change programmes up or down.
Enter the home desktop.
10.
11.
Open the menu options.
12. Navigate the menu.
13. OK Confirm the selection.
Press to go back to previously viewed channel. In menu: Back to previous menu.
14.
Select the input source mode.
15.
16. EXIT Exit the current menu.
17. ZOOM Change aspect ratio.
18.
Press to access the TV settings
19. INFO Display information about the current source.
20. EPG Press to display the current EPG information in DTV mode.
Lang/AD Select audio language.
21.
22. USB Enter the multimedia menu.
23. SUBT. Enable/disable subtitles in DTV mode.
24. TEXT Press to enter or exit the teletext menu.
25. COLOUR BUTTONS
Press to execute the prompt function in TV or DTV mode.
26. 5 Press to fast reverse.
27. Press to continue playback.
28. 2 Press to pause playback.
7
29. 6 Press to fast forward.
30. { Press to play the previous file.
31. 3 Press to stop playback.
32. } Press to play the next file.
33. 4 No function.
34. NETFLIX Press for direct access to Netflix*
35. YouTube Press for direct access to YouTube.
* Membership is not included. Netflix is available in selected countries. Streaming Netflix requires to set up an account. Broadband
Internet required. See www.netflix.com/TermsOfUse for details.
2.5 Installing the batteries
Place 2x AA batteries in the battery compartment of the smallest remote control and 2 x AAA in the
battery compartment of the biggest remote control. Make sure to match the polarity markings inside the
compartment.
NOTE: Pictures are for reference only. Actual items may be different.
1. Open the cover.
2. Put batteries in the compartment and make sure the polarity is correct.
3. Close the cover.
Precautions for using the battery
Improper using of the battery will cause leakage. Carefully follow these instructions.
1. Please note the batteries' polarity to avoid short circuit.
2. When the battery's voltage is insufficient which affects the use range, you should replace it with a
new battery. Remove the batteries from the remote-control unit if you do not intend to use it for a
long time.
3. Do not use different types of batteries (for example Manganese and Alkaline batteries)
together.
4. Do not put the battery into fire, and charge or decompose the battery.
5. Please dispose batteries abide by relevant environmental protection regulation.
Fig. 5
2.6 Using the remote controls
Use the remote control by pointing it towards the remote sensor. Items between the remote
control and the remote sensor could block normal operation.
Do not cause the remote control to vibrate violently. Also, do not splash liquid on the remote
control or put the remote control in a high humidity place.
Do not place the remote control under direct sunlight which will cause deformation of the unit by
heat.
When the remote sensor is under direct sunlight or strong lighting, the remote control will
not work. If so, please change the lighting or TV's position, or operate the remote control
closer to the remote sensor.
* to confirm your choices use OK button or right button.
NOTE: This TV is equipped with two remote controls. You can choose to use
8
both remote controls or just one.
3.0 FIRS T TIME INSTALLATION
After a ll connections have been made properly, switch your TV on.
Please follow the initial First Time Installation (FTI) procedure on your screen and complete the
installation. It will take a few minutes.
English
NOTE: If you plan to use smaller RCU for TV control, we recommend to make
TV channels installation
Select TV Environment as Home or Shop/Shop with demo to define place of TV installation and usage.
pairing of it with your TV. This will allow using extended features of it. FTI
procedure start with pairing screen. Fallow simple on-screen instructions
for this. If you miss this screen, it is possible to make pairing later in Settings
chapter of menu or by pressing
<1 m
Please press OK and HOME at the same time
Home
key on RCU at first time of it usage.
Remaining 8s
Environment
Please choose your Environment
Shop
Shop with demo
Select your country and confirm your selection with OK.
9
Where are you?
ALBANIA
We will provide you with the local time,
climate and more information
Country/Region
Afte r confirming Terms & Conditions and Notices you can start the channel installation.
Select your preferred Tuner Mode Antenna, Cable or Satellite.
It is possible to skip scanning and perform it later. Select Skip in this case.
ANDORRA
AUSTRIA
BELARUS
BELGIUM
Channel installation
Tuner mode Type
Antenna
Cable
Satellite
Scan Skip
To install channels for terrestrial or cable broadcasting please select Antenna or Cable and choose
required type of channels Digital, Analogue or All.
Digital
Channel installation
Tuner mode Type
Antenna Digital
Analogue
All
Scan Skip
10
Then – move to Scan and make scanning. System will scan for channels and save them to channel list.
To install channels from satellite broadcasting, select Satellite and perform required settings according to
your actual satellite system configuration.
Satellite Tune
01 Ku_Hispasat 30W-5/30W-6 30.0W
02 Ku_Intelsat 901 27.5W 002 10770 H 30000
03 Ku_Eutelsat 7 West A 7.0W 003 10890 V 27500
04 Ku_Eutelsat 5 West A/B 5.0W 004 10917 V 7500
05 Ku_Amos 3/7 4.0W 005 10922 V 1667
06 Ku_ABS 3A 3.0W 006 10930 H 30000
07 Ku_Intelsat 10-02 0.8W 007 11262 V 30000
08 Ku_Astra 4A 4.8E 008 11302 H 30000
09 Ku_Eutelsat 7B/7C 7.0E 009 11330 H 9140
001 10730 H 27500 LNB Type
Hispasat 30W-5/30W-6TransponderSatellite
LNB Power
22KHz
Unicable
IF Freq
SatPosition
Toneburst
DiSEqC1.0
DiSEqC1.1
09750/10600
Auto
Auto
1 1210
SatA
None
None
None
Off
0Signal Level
0Signal Quality
Delete
Edit Add Scan
Select the satellite, you want to configure, and in most right column set correct DiSEqC port for it.
If you want to scan only some specific Transponder(-s) for it, check them in columns in the middle. If you
want to scan all transponders for satellite, just check satellite in most left column.
Repeat this for other satellites if they are present in your system.
Press BLUE button for scanning. System will scan for channels and save them to channel list.
To complete installation follow the instruction on the screen.
To scan more channels or to install channels of another TV system, after installation process completed,
select option Another Mode or Next to finish channel installation.
English
Channel installation
Another modeAntenna NextDigital 0 Channels
Refer to Chapter 5.1 for more information for TV channel installation.
Congratulations! You have successfully completed the First time installation of your TV.
11
4.0 HOME SCREEN
The Home screen is the main screen of this model of TV.
It divided on few zones and lines and contains
Search line with possibility to enter text to search information or content, related with this text;
Notification corner, which provide information about system notifications and messages. It also
gives quick access to TV inputs, connections, settings and show current system time.
Application line Apps, which contain the list of most used applications, including Live TV
application and others, and icon Apps – for access to complete applications list, installed in the
system, and to Application Store to get to other new applications;
Few more lines, which also called Channels, which shows detailed content, specific for each
application. It is possible to customize this area. Use Customize channels to make changes.
Please note, S-Channel line contains the list of recommended, but not installed on your TV
applications.
Apps
YouTube
Try searching for “sci-fi movies”
Customize channels
1
6:28
To access Home screen and exit from any active application, press button on the remote control unit
(RCU).
Use and to move around and OK to enter the option or application.
4.1 Inputs
TV has such possible inputs or sources: ATV, ANTENNA, CABLE or SATELLITE for respective live TV installed
channels preview or HDMI 1, HDMI 2, HDMI 3 and AV to select connection from external devices.
To access to this option, select Inputs item on Home screen or press INPUT button on RCU.
Select the input sources for the devices which are connected to the TV through the different inputs or
ports.
12
ATV
ANTENNA
CABLE
SATELLITE
Try searching for “sci-fi movies”
Wi-Fi is not connected
This device is not currently connected to a Wi-Fi network
1
Details Dismiss
6:28
HDMI1 >
HDMI2 >
Apps
HDMI3 >
AV
YouTube
Google Play Movie
4.2 Network & Internet
Connection to internet allows to install and use internet applications (i.e. You Tube, Netflix, etc.) and to
enjoy of other advantages of Smart TV.
Access to the part for network and internet connection is through chapter Network & internet of Settings
menu or through quick access panel on Home screen.
Network & internet
Apps
YouTube
Search movies, TV, and more
Wi-Fi is not connected
This device is not currently connected to a Wi-Fi network
Wi-Fi
Other options
Scanner always avalible
Let Google’s location service and
other apps scan for networks,
even when Wi-Fi is off
Wow
wake on wireless network
Wol
wake on LAN
Ethernet
Not connected
Proxy settings
English
Your TV can be connected to your home network in two ways:
Wired, using the RJ-45 (LAN) connector on the back panel.
Wireless, using the internal wireless and your home wireless network.
NOTE: To access the Internet, you must subscribe to a highspeed broadband
Internet service with your Internet service provider.
NOTE: Instructions below are just the usual ways to connect your TV to a wired or
wireless network. The connection method may differ depending on your
actual network configuration. If you have any questions about your home
network, please refer to your Internet service provider.
13
Connecting to a wired network
NOTE: The graphics are for representation only.
Router
or
Ethernet
Port on the
back panel
Modem
TV Set
Internet
To connect to a wired network
1. Ensure you have:
An Ethernet cable long enough to reach your TV
A router or modem with an available Ethernet port
A highspeed Internet connection
2. Connect your Ethernet cable to the router and to the Ethernet port on the back of the TV.
3. Use the Network Configuration menu to configure the TV.
Connecting to a wireless network
Fig . 6a
Fig. 6 b
NOTE: The graphics are for representation only.
Modem
Wireless router
Built-in wireless
connection
TV Set
To connect to a wireless network:
1. Ensure you have:
14
A router broadcasting a 2.4GHz wireless signal
A highspeed Internet connection
2. Select your Wi-Fi network from the Available networks list and enter password for connection.
3. Use other options of menu to configure the connection (if required).
Please refer to chapter 6 to read more about Smart features of your TV.
5.0 LIVE TV USAGE
Select Live TV application from Home screen or one of TV sources from input menu to watch live TV
channels. Press OK to start this application.
This application gives you access to live TV to watch and enjoy your favorite TV and radio programs from
TV sources (ATV, Antenna, Cable or several of Satellites) of your choice.
In case if you skipped channel installation part during FTI and enter application for the first time,
application will recommend to perform channel scanning and installation.
English
NOTE: Please note, that you can’t watch anything, if there are no channels scanned
and installed.
5.1 Channel installation
Exist two ways to install channels.
Way 1 - through TV options from Channels chapter with OK button
Press OK to get to Channels chapter.
Select CH+ icon to add new channels.
Channels
CH
Program Guige
TV options
Select source for channels installation.
New Channels Available
15
New
ATV
Set up your sources
Live channels combines the experience of traditional TV
channels with streaming channels provided by apps.
Get started by setting up the channel sources already
installed. Or browse Google Play Store for more apps
that offer live channels.
New
CABLE
New
SATELLITE
New
Sources
ANTENNA
54 channels
Done
ATV mode provide access to analogue channels setup. You could start Analogue Auto Tuning, make
manual tuning and define some parameters for Teletext
Select Antenna or Cable to scan digital aerial or cable TV channels.
Digital Antenna Tuning
UKRAINECountry/Region
Auto Tune
Manual Tune
LCN
Automatic Channel Update
Update Tune
Total Scanned: 0
Off
On
Off
Digital Cable Tuning
Auto Tune
Manual Tune
LCN
16
UKRAINECountry/Region
Total Scanned: 0
Off
Digital Setup
Number of services found: 0
Frequency (MHz): 205.500
Searching...
Select Satellite to scan digital satellite TV channels.
Digital Satellite Tuning
Satellite Tune
English
UKRAINECountry/Region
Select the satellite, you want to configure, and in most right column set correct DiSEqC port for it.
If you want to scan only some special transponder(-s) of it, check them in columns in the middle. If you
want to scan all transponders for satellite, just check satellite in most left column.
Repeat this for other satellites if they are present in your system.
Press BLUE button for scanning.
17
Satellite Tune
01 Ku_Hispasat 30W-5/30W-6 30.0W
02 Ku_Intelsat 901 27.5W
03 Ku_Eutelsat 7 West A 7.0W
04 Ku_Eutelsat 5 West A/B 5.0W
05 Ku_Amos 3/7 4.0W
06 Ku_ABS 3A 3.0W
07 Ku_Intelsat 10-02 0.8W
08 Ku_Astra 4A 4.8E 011 11747 V 30000
09 Ku_Eutelsat 7B/7C 7.0E 012 11766 H 27500
004 11305 V 30000
005 11345 H 30000
006 11345 V 30000
007 11385 V 30000
008 11385 V 30000
009 11727 H 27500
010 11747 V 27500
LNB Type
LNB Power
22KHz
Unicable
IF Freq
SatPosition
Toneburst
DiSEqC1.0
DiSEqC1.1
Signal Level
Signal Quality
Delete
Edit Add Scan
To complete installation follow the instruction on the screen.
Astra 4ATransponderSatellite
09750/10600
Auto
Auto
1 1210
SatA
None
LNB1
None
100
100
Off
Satellite Tune
01 Ku_Hispasat 30W-5/30W-6 30.0W
02 Ku_Intelsat 901 27.5W
03 Ku_Eutelsat 7 West A 7.0W
Scan Mode
04 Ku_Eutelsat 5 West A/B 5.0W
Channel Type
05 Ku_Amos 3/7 4.0W
06 Ku_ABS 3A 3.0W
07 Ku_Intelsat 10-02 0.8W
08 Ku_Astra 4A 4.8E 011 11747 V 30000
09 Ku_Eutelsat 7B/7C 7.0E 012 11766 H 27500
004 11305 V 30000
005 11345 H 30000
Channel Search
006 11345 V 30000
007 11385 V 30000
008 11385 V 30000
009 11727 H 27500
010 11747 V 27500
Enter
LNB Type
LNB Power
22KHz
Network
Unicable
Default
IF Freq
SatPosition
Blind Scan
Toneburst
DiSEqC1.0
DiSEqC1.1
Signal Level
Signal Quality
Delete
Edit Add Scan
System will scan for channels and save them into channel list.
Satellite Tune
Satellite Index: Ku_Astra 4A 4.8E
Programmes found: 16
Frequency (MHz): 11265
Searching...
Astra 4ATransponderSatellite
09750/10600
Auto
Auto
1 1210
SatA
None
LNB1
None
Off
0
0
After installation of new channels completed, confirm finish of it with Done item on Setup sources
screen.
18
Way 2 - through TV menu from Scan Channels chapter
Press
and then button to get to Scan Channels chapter.
You will enter to same scan chapters, as described above, according to selected and using TV system
type or TV source.
English
Display & sound
Info
Picture Adjustments
Scan Channels
Primary Preferred Language
Secondary Preferred Language
Channel Organizer
TV
NOTE: When you enter to Live TV application at first time after channel installation,
you will be asked to confirm functionality of your RCU by pressing one of
the buttons.
Live TV
Press OK key to access the TV
5.2 Watching TV channels
When the installation is completed, you can use TV set for watching of installed TV programs.
Some helpful features for comfortable watching.
Changing channels
Following ways are possible for changing channels:
Via direct access using the 0~9 buttons.
Via the or P+/P buttons.
19
Via the channel list using LIST and buttons. Use P+/P buttons in the list to move through
list Page Up or Down, use keys to switch between different channel lists type, like TV
channel, Radio channel, Scrambled channel and other, including favourites channel Lists.
Info Banner
While watching TV you can press INFO button to get information about current / next program and
event on broadcasting and also some other useful information about it*.
*Event information is displayed when available. Availability depends on the broadcast.
5.3 Electronic Program Guide (EPG)
EPG stands f or Digital Electronic Program Guide. It is suppli ed by the programme providers and offers
information about broadcasted programmes. You can access it in digital mode by pressing EPG on the
remote control or through TV options with OK button in Channels chapter. Select Program Guide icon to
get into EPG.
Use to select channel and to see detailed information for program.
Press BACK to stop and return to viewing modes.
Press COLOUR buttons to make required actions:
RED jump to Previous Day of EPG
GREEN jump to Next Day of EPG
NOTE: Vertical line in time bar shows current time. Selected program has progress
bar in different colour, which shows how much time passed from the
beginning of the program.
5.4 TV Menus
You can use access to menus of Live TV application to make changes in channels viewing and set other
options.
Application has several different branches to get access to TV options and settings:
by OK button;
by
by
TV options, available by OK button
It has 2 levels Channels (default) and TV options. This menu organized as lines of icons.
- 1st TV options level
This level called Channels and gives access to some information and parameters of broadcasting.
It contains such items: Program Guide, CH+ (New Channels Available).
Program Guide gives access to EPG. Please refer to Chapter 5.3 for more information how to use it.
P+ (New Channels Available) tool allows quickly add/install new channel to channel list. Please refer to
Chapter 5.1 for more information how to use it.
20
button;
button.
Channels
CH
Program Guige
TV options
- 2nd TV options level
TV options contains such items: Subtitle language, Add favorite, Audio Language and Channel options.
Channels
TV options
Subtitle languageOffAdd favorite Audio language
New Channels Available
Ukrainian (stereo)
Channel options
English
Options for Subtitle language are:
Off
Basic
Hearing Impaired
Add favorite allows to add or remove current channel to/from 1 or more Favorite channel lists. If selected
channel included into one of Favorite channel lists, in Info-banner will present symbol Heart in RED color
in top-right corner.
Options for Audio Language are: Audio Language for selection actually audio language track and Audio
Description (if available from broadcasting).
Channel Options define additional options for organizing and control channels preview.
Available options and parameters:
Hide Channels marked channels are visible. To hide channel in channel lists and for zapping
just unmark it. Please note, channel remain available via direct access through
0~9 buttons;
Parental controls if this parameter is ON, it is possible to define limitations to access particular
sources and channels. Here you also could change current PIN to new one;
21
Common Interface gives access to CI slot and CAM card menu, which inserted into slot.
Signal Condition to show detailed information about current channel, like Signal Level and
Quality, Frequency, Service ID, etc.
Version show actual FW version
TV menu, available by
By pressing
button you will get access to TV menu.
button
It has 2 columns Display & Sound (default) and TV. This menu organized as lists of items.
Here you could change screen and sound parameters for most comfortable watching TV channels and
also scan for new channels and organized channels.
- Display & Sound
This menu gives access to screen and sound parameters of TV.
It contains such items: Info, Picture Adjustments, Screen, Sound adjustments, Speakers and HDMI Settings.
Info call same information banner, as by INFO button. For more details, please refer to Chapter 5.2)
Picture adjustment has 2 sub-menues:
Picture Mode
Advanced Settings
Picture Mode propose such options for moving pictures quality: Standard (as default and Dynamic, Movie,
Sport, Personal. Select for most acceptable for you picture quality.
Use Advanced Settings to adjust picture parameters as Brightness, Color and Clarity settings.
Screen (Mode) propose such options for Display aspect ratio:
Zoom 1, 4:3, 16:9
Zoom 2
Small screen icon at the right will show you, how each item will change the screen.
This sub-menu also available by pressing of ZOOM button on RCU.
Sound adjustment has such sub-menues:
Sound Mode
Surround
Advanced Settings
Sound Mode propose such options for sound quality: Standard (as default and Sports, Movie, Music, news.
Select for most acceptable for you sound quality.
Surround used to ON or OFF (as default life-like surround sound from 5.1-channel audio sources.
Use Advanced Settings to adjust sound parameters as Volume Settings and Sound Mode Related settings.
HDMI Settings menu option give you access to HDMI CEC control settings – to use 1 of your RCU to
provide limited control with it of your TV and other of connected to TV through HDMI devices.
- TV
This menu gives access to sub-menus to scan for new channels and organized them in most useful way.
It contains such items:
Scan Channels
Primary Preferred Language
Secondary Preferred Language
Channel Organizer
Please refer to Chapter 5.1 for information how to scan and install new channels.
22
Here you could also select primary and secondary preferable audio language for channels. If any options
available from broadcasting, TV will consider your preferences.
Channel organizer give possibility to make changes in channel list as Hide, Swap, Edit, Insert, Delete, Move
and Clear all for selected by OK channel.
English
NOTE: Please note, that using the option Clear all will remove all stored channels
from your TV.
TV Settings menu, available by
button
This is TV system menu, which organized in column at right side of screen.
It’s available from any application by pressing
button on RCU.
TV Settings
TV
Antenna
External Inputs
Picture & Display
Sound
Smart Zone
System
HBBTV
Content of TV Settings menu:
Antenna (or Satellite, or Cable)
give access to installation channel menu or selected TV type, if TV application
is active.
External Inputs to make some configuration for external inputs, like HDMI, etc.
Picture & Display define display and picture mode, and manually set picture parameters like
Brightness, Contrast, Colour, Clarity, etc. (same options, as from TV menu,
described above)
Sound define system sound mode and manually set Sound Adjustment, TV
Placement (Wall Mount or Desktop) and Digital Audio Out (PCM or DD+).
Smart Zone will show some additional smart-options. Please refer to Chapter 6 for more
details.
System will call system setting options, like Language, Environment, Power, Sleep Timer,
Smart TV Manual, etc.
HBBTV to set HBB TV support settings.
23
6.0 SMART TV POSSIB ILITIES
Your TV model is smart. That is meaning that in addition to watching of normal Live TV, it provided some
extra features, which allows you to use it in more flexible and wide way, to select other video content
sources, like YouTube, Netflix, etc., to install various applications to extend functionality of your TV.
NOTE: Using of smart functionality of your TV require connection to internet and,
Using Google account give you access to applications and games, movie and music market of Google
Play Store. Here you could search, select and install some useful utilities or games, applications for IPTV
content, for watching streaming video and music content, another player for Multimedia, receive actual
weather information and other.
Quite often application required registration and using of unique account to get access to their services.
Please note, that not all services are for free and require subscription fee. Please keep this information in
private.
By
RCU button TV will show some additional smart-options:
Enjoy Music to switch off TV screen while playing music;
FastCast to use TV as big screen for your smartphone;
Sleep Timer to set sleep timer for your TV (if no RCU buttons were pressed during some
World Clock to show clock with actual time on TV screen;
Night Mode. to switch ON or OFF night mode for your TV.
in most cases, using your Google account. Please refer to Chapter 3 and
Chapter 7 for information how to setup internet connection and enter to
Google account.
period of time);
Enjoy Music FastCast Sleep Timer World Clock Night Mode
7.0 SYSTEM SETTINGS
Access to all s ettings of your TV provided from chapter Settings menu through quick access panel on
Home screen or from the list of all applications.
24
7.1 Settings main menu
Settings
Suggestions
Finish setting up your TV
Add a Google Account to mute
the most of your TV
General Settings
Network & internet
StrongGuest
Accounts & sign-in
No accounts
Apps
Device Preferences
Remotes & accessories
Main setting features, like network connection, accounts, applications and other are available from first
screen of setting menu.
Here you will get some system suggestions, manage your accounts (Accounts & sign-in) and your
applications (Apps).
For Network & internet connections please refer to Chapter 4.2
In chapter Remotes & accessories you could add to TV and manage accessories, like remote control unit,
Bluetooth headphones, etc.
7.2 Device Preferences menu
To get access to all device control options, like Date & time, Language, Picture, Sound, etc., please select
Device Preferences chapter on this menu.
Enter to main settings menu. Press to select Device Preferences, then press OK to enter the submenu.
Sub-menu content:
About provide information about your device model and name, some other useful
Date & Time define the way how to set local date and time, set format of this information,
Language display various languages list to set menu language for you TV. Use to
Keyboard set graphical on-screen keyboard parameters.
Sound define system sound mode and manually set sound parameters like System
Storage information about internal and connected storage devices
Home screen customize appearance of your Home screen.
Other options available in this menu: Google Assistant, Chromecast built-in, Screen saver, Location, Usage &
diagnostics, Accessibility
Reboot to reboot your TV.
information and also give access to tool of restart or update system.
select local time zone.
select required language and press OK to confirm.
sounds, Balance, Equalizer, Auto Volume Control, etc.
English
25
8.0 MULTIMEDIA
8.1 Reminder when using the USB storage devices
1. Some USB storage devices may not be compatible to operate smoothly with this TV.
2. Back up all of the data in the USB storage device in case data is lost due to an unexpected
accident. STRONG does not assume any liability for the losses by misuse or malfunction. Data
backup is consumer’s responsibility.
3. For large file sizes, the loading speed may be slightly longer.
4. The recognition speed of a USB storage device may depend on each device.
5. When connecting or disconnecting the USB storage device, make sure the TV is not in USB
mode, otherwise the USB storage device or the files stored in it may be damaged.
6. Please use only a USB storage device which is formatted in FAT16, FAT32, NTFS (playback only)
file system provided with the Windows operating system. In case of a storage device formatted
as a different utility programme which is not supported by Windows, it may not be recognized.
7. When using a USB Hard Disk Drive, which is not powered independently, ensure its power does
not exceed 500 mA. Otherwise, the TV system will change into standby mode, and you must
pull out the USB Hard Disk and restart the TV system.
8. An “Unsupported File” message will be displayed if the file format is unsupported or the file is
corrupted.
9. FHD big picture needs longer time to process, which is not caused by the TV. Please be patient.
10. This TV may not support some Multimedia files changed and upgraded as the change of the
encoding format or other technical aspects advances.
8.2 Multimedia Player
To playback media files like to view videos and movies, play music, show photos and pictures and read
text files from your USB storage devices recommended to use built-in Multimedia player, shown on icon
like Smart Player. It available from the list of installed applications.
Get more apps
Apps
With Smart Player you can reproduce video, audio or picture files of supported formats from your USB
storage devices on your TV screen.
NOTE: If, for any reason, you do not want to use built-in Smart Player application,
you could enter to Google Play Store and install any of available media
players (i.e. MX Player, VLC Player, etc.).
26
Get more games
Smart
player
NOTE: Support (or non-support) of Multimedia files depend not only on your
TV, but also on application, which will be used for playback. Different
Multimedia applications could contain built-in abilities to support various
formats and types of Multimedia files.
Connect a USB storage device to the USB port, run Smart Player and select the types of media on the
Multimedia selection part of screen: Video, Photo, Music and Disk.
Video Photo Music Disk
All Videos
Clear history
Your TV will collect all supported files of selected media type and will show them in one list.
Use and to select file.
Press OK for playback.
During playback you could use Multimedia buttons on your RCU or use on-screen commands, available
from menu by
button.
English
NOTE: By choosing one of the media types, for example Video, the list will display
only compatible media files and no other files of other types.
TV remember files, which were opened earlier for playback, and show them as History line.
Use
to clear history.
27
8.2.1 Play videos
Select Video from Multimedia type selection and choose file for playback.
Title: CONT-3A.mp4
00:03
Additional useful keys:
OK to play or pause the playback.
for rewind backward/forward the file.
to switch to previous/next file for playback.
INFO button to get more information about the file.
To get access to control playback during playback press
00:46
to display the menu.
More
i
Photo scale Looping mode Subtitle Subtitle code Audio track info
Available options:
Photo scale to define aspect ratio of picture on screen during playback
Looping mode select repeat mode for playback
Subtitle to show subtitles on screen (if available)
Subtitle code to select subtitles encoding
Audio track select sound tracks (if available)
info display detailed information about file
Settings to get access to TV Settings menu, same as by
Settings
button.
28
8.2.2 Browse photos
Select Photo from Multimedia type selection and choose the file from which the slideshow has to start
the playback.
Video Photo Music Disk
History
All Photos
Clear history
i
Left Rotation Right Rotation zoom+ zoom- Manual Play Information Play IntervalPlay Mode
English
To get access to control playback during playback press to display/exit the menu.
Available options:
Left/Right Rotation to rotate picture on screen
Zoom +/- to zoom in/out picture on screen
Manual Play to play or pause the slideshow playback
Information display detailed information about file
Play Mode select play mode for slideshow playback
Play Interval on select play interval between slides for slideshow playback
BGM to ON/OFF background music.
29
8.2.3 Play music
Select Music from Multimedia type selection and choose file for playback.
Video Photo Music Disk
All Musics
01-aeroport.mp3
Local Music
Lyrics: Unknown
Singer: Елена Ваенга
Clear history
00:04
03:15
Music List
To control playback use on-screen or RCU Multimedia buttons.
Additional option:
Repeat select repeat mode for playback
To get access to tracks playlist press
.
NOTE: An over-modulated mp3 file may cause some sound distortion during
playback.
8.2.4 Browse les
Select Disk from Multimedia type selection and choose folder to enter or file for playback.
30
Video Photo Music Disk
All Musics
Transcend
Clear history
English
NOTE: This menu shows only supported by Smart Player files.
Files with other file extensions may not be displayed, even if they are
saved on the same USB storage device.
9.0 TROUBLESHOOTING
Before calling a service technician, review following information for possible causes and solutions for
the problem you are experiencing. If the TV does not work properly after checking it, please contact
your local service line or STRONG dealer. Alternatively, you can send a support mail via our website
www.strong.tv.
Problem Possible cause and solution
No picture, no sound 1. Check if the fuse or circuit breaker is working.
No colour 1. Change the colour system.
The remote control does not
work
No picture, normal sound 1. Adjust the brightness and contrast.
Normal picture, no sound 1. Press the volume up button to increase the volume.
Unorderly ripples on the
picture
2. Plug another electrical device into the outlet to make sure it is
working or turned on.
3. The power plug is in bad contact with the outlet.
4. Check the signal source.
2. Adjust the saturation.
3. Try another channel. Black-white programme may be
received.
1. Change the batteries.
2. The batteries are not installed correctly.
3. Main power is not connected.
2. Broadcasting failure may happen.
2. The volume is set to mute, press ! to restore the sound.
3. Change the sound system.
4. Broadcasting failure may happen.
It is usually caused by local interference, such as cars, daylight lamps
and hair driers. Adjust the antenna to minimize the interference.
31
Problem Possible cause and solution
Snowy dots, blocking and
interference
Ghost Ghosts are caused by the television signal following two paths. One
Radio frequency interference This interference produces moving ripples or diagonal streaks, and
Playback of video is causing
picture freeze/macro
blocks or similar distortion,
especially on HD content
No signal or weak signal,
intermittent reception
Bad picture/blocking error
during heavy rain
If the TV turns off after
plugging a cable into any
connector
If the antenna is located in the fringe area of a television signal where
the signal is weak, the picture may be marred by dots, show blocking
or break-ups. When the signal is extremely weak, it may be necessary
to install a special antenna to improve the reception.
1. Adjust the position and orientation of the indoor/outdoor
antenna.
2. Check the connection of the antenna.
3. Fine tune the channel.
4. Try another channel. Broadcasting failure may happen.
is the direct path, the other is reflected from tall buildings, hills, or
other objects. Changing the direction or position of the antenna may
improve the reception.
in some case, loss of contrast in the picture. Find out and remove the
radio interference source.
Read/write speed of your USB device could be too low. Make sure to
use a USB storage device with sufficient speed and space. Pen drives
(USB sticks) may not support sufficient speed.
a) Cables might have loosened; moisture might have entered
into cables or connectors, heavy rain at present or heavy
storm at present.
Check the cable connections, LNB and other equipment
connected between the LNB and the receiver, or peak the
dish.
Wait for rain/storm to subside. Ask a local satellite specialist
for advice.
b) The satellite dish is not pointing at the (correct) satellite(s).
Adjust the dish. Ask a local satellite specialist for advice.
c) Satellite dish is too small, trees or buildings in path.
Change to a larger dish or change position of dish.
d) Signal is too strong, dish is oversized.
Connect a signal attenuator to the LNB input. Ask a local
satellite specialist for advice.
Heavy rain will attenuate satellite signals, below a certain level
blocking will occur.
Make sure your dish installation is up to standards to minimize rain
effects. When in doubt, ask a local satellite specialist for advice.
Again, turn on the TV.
NOTE: If the problem persists after these solutions, please contact your local
32
support centre or send a support mail via our website www.strong.tv.
10.0 SPECIFICATIONS
Audio
Audio Output: 42”, 43”: 2 x 8 W
32”: 2 x 5 W
Video
Channel coverage: DVB-T2: 174 MHz-230 MHz; 470 MHz-860 MHz
DVB-C: 113-858 MHz
DVB-S2: 950 MHz-2150 MHz
System: DTV: DVB-T2, DVB-S2, DVB-C
ATV: PAL/SECAM (BG/DK/1)
AV: PAL, NTSC, SECAM
Connectors 32”, 43”
1x ANT IN
1x SAT IN
1x CI
3x HDMI
2x USB
1x LAN (RJ-45)
1x S/PDIF (optical)
1x AV IN 3,5 mm
1x HEADPHONES
Connectors 42”
1x ANT IN
1x SAT IN
1x CI
2x HDMI
2x USB
1x LAN (RJ-45)
1x S/PDIF (optical)
1x AV IN 3,5 mm
1x HEADPHONES
General Data
Operating voltage: 180 ~ 240 V AC 50/60 Hz
Power consumption: 42”: max. 75 W, typ. 50 W
43”: max.85 W, typ. 58 W / max. 85 W, typ. 60 W
32”: max. 50 W, typ. 31 W
Pow er consumption in standby: ≤ 0.5 W
Operating temperature: +5 °C ~ +35 °C
Storage temperature: -15 °C ~ +45 °C
Operating humidity: 20% ~ 80% RH, non-condensing
Storage humidity: 10% ~ 90% RH, non-condensing
Dimensions (WxDxH) in mm: 42”: 951.3 x 213.7 x 593.5
43”: 996.7 x 221.6 x 616.3
32”: 725.9 x 181 x 478.4
Net-weight: 42”, 43”: 6.2 kg
32“: 3.6 kg
English
33
Data Protection:
Please be aware that STRONG, its manufacturing partners, the application providers and the providers
of the services may collect and use technical data and related information, including but not limited
to technical information about this device, system and application software and peripherals. STRONG,
its manufacturing partners, the application providers and the providers of the services may use such
information to improve its products or to provide services or technologies to you, as long as it is in a form
that does not personally identify you.
Additionally, please keep in mind that some services provided - already in the device or installed by you may request a registration for which you have to provide personal data.
Besides that, please be aware that some services which are not pre-installed but can be installed may
collect personal data even without providing additional warnings and that STRONG cannot be held
liable for a possible breach of data protection by services not pre-installed.
34
Loading...