LED TV with DVB-T2/C/S2
SRT 32HC2003
User Manual
Bedienungsanleitung
Manuel utilisateur
Manual del Usuario
Инструкции за употреба
Uživatelská příručka
Korisnički priručnik
Használati útmutató
Manuale utente
Gebruiksaanwijzing
Instrukcja obsługi
Manual do Utilizador
Manual de Utilizare
Uputsvo za upotrebu
Používateľská príručka
Navodila za uporabo
Посібник користувача
Руководство пользователя
www.strong.tv
Supplied by STRONG Austria
Represented by STRONG Ges.m.b.H
Teinfaltstraße 8/4.Stock,
A-1010 Vienna, Austria
Email : support_at@strong.tv
support_ua@strong.tv
+380 (44) 238 61 50
31 Mar 2021 18:07
Licenses
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE
PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN
COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC
VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND
NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED
TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER
USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE
HTTP://WWW.MPEGLA.COM
This product contains one or more programs protected under international and U.S. copyright
laws as unpublished works. They are confidential and proprietary to Dolby Laboratories. Their
reproduction or disclosure, in whole or in part, or the production of derivative works therefrom
without the express permission of Dolby Laboratories is prohibited. Copyright 2003-2009 by
Dolby Laboratories. All rights reserved.
English
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, STRONG declares that the device SRT 32HC2003 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: https://www.strong.tv/en/doc
Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance
of products may change. Manufactured under license from Dolby Laboratories. Dolby Audio and the double-D symbol are
trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are
trademarks or registered trademarks of HDMI Licensing Administrator, Inc in the United States and other countries. All product
names are trademarks or registered trademarks of their respective owners.
© STRONG 2021. All rights reserved.
www.strong.tv
1
To obtain the best performance and safety, please read this manual carefully. Please keep this
manual for future reference.
TABLE OF CONTENTS
1.0 INSTRUCTION 3
1.1 Safety Instructions 3
1.2 Storage 4
1.3 Accessories 4
1.4 Equipment set-up 4
2.0 INSTALLATION 5
2.1 Default PIN code: 0000 5
2.2 Front panel/underside 5
2.3 Rear Panel 5
2.4 Remote control 5
2.5 Installing the batteries 6
2.6 Using the remote control 7
3.0 FIRST TIME INSTALLATION 7
3.1 DVB-S/S2 installation 7
3.2 DVB-T/T2 installation 8
3.3 DVB-C installation 8
4.0 ELECTRONIC PROGRAMME GUIDE (EPG) 8
5.0 MENU SETTINGS 9
5.1 Menu control (DTV mode) 9
5.2 Channel 9
5.3 Picture menu 10
5.4 Sound menu 11
5.5 Time menu 11
5.6 Lock 12
5.7 Setup Menu 13
6.0 MEDIA 14
6.1 Reminder when using the USB player 14
6.2 USB menu 15
7.0 TROUBLESHOOTING 17
8.0 SPECIFICATIONS 19
2
www.strong.tv
1.0 INSTRUCTION
1.1 Safety Instructions
Read all of the instructions before operating the set. Keep these instructions well for later use.
Only use attachments/accessories specified or provided by the manufacturer (such as
the exclusive supply adapter, battery etc.).
Please refer to the information on the exterior back enclosure for electrical and safety
information before installing or operating the apparatus.
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture.
The ventilation should not be impeded by covering the ventilation openings with items,
such as newspaper, table-cloths, curtains, etc.
The apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the apparatus.
The mark indicates a risk of electric shock. The external wires must be installed
by an instructed person or ready-made leads or cords must be used.
To prevent injury, this apparatus must be securely attached to the floor/wall in
accordance with the installation instructions.
Danger of explosion if the battery is incorrectly replaced. Replace only with the same or
equivalent types.
The battery (battery or batteries or battery pack) shall not be exposed to excessive
heat such as sunshine, fire or the like.
Excessive sound pressure from earphones and headphones can cause hearing loss.
Listening to music at high volume levels and for extended durations can damage one's
hearing.
In order to reduce the risk of damage to hearing, one should lower the volume to a safe,
comfortable level, and reduce the amount of time listening at high levels.
The mains plug or appliance coupler is used as disconnect device, it shall remain readily
operable. When not in use and during movement, please take care of the power cord
set, e.g. tie up the power cord set with cable tie or something like that. It shall be free
from sharp edges or similar which can cause abrasion of the power cord set. When put
into use again, please make sure the power cord is not damaged. In case of damages,
please get the power cord replaced by a similar one with the same specifications.
The absence of a light indication on the apparatus does not mean that it is fully
disconnected from the mains. To disconnect the apparatus completely, the mains plug
must be pulled out.
Attention should be drawn to environmental aspects of battery disposal.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
To prevent the spread of fire, keep candles or other open flames away from this
product at all times.
A USB terminal can provide a maximum of 500 mA.
Equipment with this symbol is a Class II or double insulated electrical appliance. It
has been designed in such a way that it does not require a safety connection to
electrical earth.
Operating Environment
Do not install this equipment in a confined space such as a bookcase or similar unit.
Do not use the set near damp, and cold areas, protect the set from overheating.
Keep away from direct sunlight.
English
www.strong.tv
3
Do not use the set near dust place.
Do not attach candle to accessible opening area, to avoid flammable foreign material
from entering the TV.
WEEE Directive
Correct Disposal of this product. This marking indicates that this product should not be
disposed with other household wastes throughout the EU. To prevent possible harm to
the environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return your used
device, please use the return and collection systems or contact the retailer where the product
was purchased. They can take this product for environmental safe recycling.
1.2 Storage
Your device has been carefully checked and packed before shipping. When unpacking it, make
sure that all the parts are included and keep the packaging away from children. We recommend
that you keep the carton during the warranty period, to keep your device perfectly protected in
the event of repair or warranty.
1.3 Accessories
1x installation instructions
1x safety instructions/warranty cards
1x remote control
2x AAA batteries
1.4 Equipment set-up
Fig.1a
Install the display on a solid horizontal surface such as a table or desk. For ventilation, leave
a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations,
please do not place any objects on top of the set. This apparatus can be used in tropical and/or
moderate climates.
Stand assembly instruction
Fig.1b
1. Carefully place the TV with its front side facing down on a cushioned flat surface in
order to protect the TV and the TV screen from damage.
2. Take out the 2x feet and assemble them to the TV.
3. Fasten the feet to the bottom of the TV using the 4xPA4x14mm screws.
Fig.1c
This user manual provides complete instructions for installing and using this TV. The symbols
serve as follows.
WARNING Indicates warning information.
NOTE Indicates any other additional important or helpful information.
MENU Represents a button on the remote control or the TV.
(Bold characters)
Move to Represents a menu item within a window.
(Italic characters)
4
www.strong.tv
2.0 INSTALLATION
2.1 Default PIN code: 0000
2.2 Front panel/underside
NOTE: The graphics are for representation only.
1. Power indicator /remote sensor
2. Speakers
3. Buttons: Input source, Menu, V-/V+, CH-/CH+, Standby/ON.
2.3 Rear Panel
NOTE: The graphics are for representation only.
1. SCART Connect devices like DVD or VCR using SCART cable
2. SAT IN Connect a satellite dish to the TV for searching programmes.
3. ANT/CABLE IN Connect a terrestrial antenna or cable connection from your provider
to the TV for searching programmes.
4. S/PDIF (coax. output)
Use an RCA cable to connect your TV to a compatible digital amplifier
or Home theatre set.
5. COMMONINTERFACE (CI)
Connect a Conditional Access Module (CAM).
6. HDMI 1 Connect HDMI input signal from a signal source such as DVD, Blu-ray
player or game console.
7. HDMI 2 Connect HDMI input signal from a signal source such as DVD, Blu-ray
player or game console.
8. USB Connect a USB device for playback of multimedia files
9. Mini AV IN To connect your video camera or other device using 3.5 mm AV cable to
your TV to play videos on your TV screen
10. Mini YPbPr Connect YPbPr sources.
11. HEADPHONE Speakers will be muted when earphone is plugged in and headphone
selected.
English
Fig.2
Fig.3
2.4 Remote control
1. q Press to turn the TV on or standby.
2. ! Press to mute or restore the volume.
3. DTV Press to go back to Digital TV.
4. (ASPECT)
5. (PICTURE) PIC Change picture mode.
www.strong.tv
Change aspect ratio.
Fig.4
5
6. SOUND Change sound mode
7. 0 ~ 9 Choose channel directly.
8. DIGIT_IMG Change the maxium input programme digit
9. 9 Press to go back to previous viewed channel.
10. INFO Display information about the current source.
11. FREEZE Press to hold the picture
12. TV/ R Switch between TV and radio.
13. COLOUR BUTTONS
Press to execute the prompt function in TV or DTV menu mode.
14. SLEEP Select the sleep time, such as 10 min, 20 min etc.
15. SOURCE Press to change signal source
16. ENTER Confirm the selection.
17. pqtu Navigate the menu.
18. MENU Open the menu options. Step back in some menu options.
19. Exit the current menu.
20. VOL +/- Adjust the volume up or down.
21. (SUB.PAGE) SUB.P
Press this button to enter or exit subpage mode (if subpage is
22. EPG Press to display the current EPG information in DTV mode.
23. CH +/- Change programmes up or down. Big steps in Channel list.
24. HOLD Press to hold the teletext page on screen without update and changes.
25. (REVEAL) TIP In teletext mode, press to reveal the hidden information.
26. SIZE Enlarge the teletext display. Press this button once to enlarge upper
27. INDEX Press this button to display index page.
28. 7 Press to play the previous file.
29. 8 Press to play the next file.
30. TEXT Press to enter or exit the teletext menu.
31. FAV Press to view your assigned favourite list or main list channels. Press
32. AUDIO Press to select available audio languages. Selecting audio description,
33-35. No function
available. Press the tu buttons to select a subpage.
Press again to release the hold state.
half of the screen. Press this button again to enlarge lower half of the
screen. Press this button again to resume to normal screen size.
pq to cycle through your assigned favourite channels, press OK to
confirm.
a narrator will describe what is happening on the screen for blind or
visually impaired viewers. Press again to turn it off (depending on
broadcast).
2.5 Installing the batteries
Fig.5
Place 2x AAA batteries in the battery compartment of the remote control. Make sure to match
the polarity markings inside the compartment.
NOTE: Pictures are only for reference. Actual items may differ.
1. Open the cover.
2. Put 2x AAA batteries in the compartment and make sure the polarity is correct.
6
www.strong.tv
3. Close the cover.
Precautions for using the battery
Improper using of the battery will cause leakage. Carefully follow these instructions.
1. Please note the batteries' polarity to avoid short circuit.
2. When the battery's voltage is insufficient which affect the use range, you should
replace it with a new battery. Remove the batteries from the remote control unit if you
do not intend to use it for a long time.
3. Do not use different types of batteries (for example Manganese and Alkaline batteries)
together.
4. Do not put the battery into fire, and charge or decompose the battery.
5. Please dispose batteries abide by relevant environmental protection regulation.
2.6 Using the remote control
Use the remote control by pointing it towards the remote sensor. Items between the
remote control and the remote sensor could block normal operation.
Do not cause the remote control to vibrate violently. Also, do not splash liquid on the
remote control, also do not put the remote control in a high humidity place.
Do not place the remote control under direct sunlight which will cause deformation of
the unit by heat.
When the remote sensor is under direct sunlight or strong lighting, the remote control
will not work. If so, please change the lighting or TV's position, or operate the remote
control closer to the remote sensor.
3.0 FIRST TIME INSTALLATION
After all connections have been properly made, switch on your TV. The language selection will
appear on screen. Use tu to select the OSD Language of your preference. Press q and then
use tu to select the country where you will use this TV. This is important to set settings as
time zone and text character correctly. Press q to change Environment from Home to Shop
modus to demonstration TV in shop, otherwise keep as it is.
Press ENTER for next step to go to Tuning setup.
In Tuner setup selection you select which tuner input source you like to use.
Tuner Type If you still have analogue signals in DVB-T or DVB-C. Select here
between options of Digital /+ Analogue systems.
Digital type Satellite to receive satellite broadcasts if you are equipped with a
satellite dish),
DVB-T to receive terrestrial broadcasts with indoor or outdoor antenna.
DVB-C to receive cable broadcasts if you have cable connection from
local provider.
Next step is depending of your choice in Tuner setup.
English
3.1 DVB-S/S2 installation
Satellite
Press q to select Satellite and use tu to highlight the satellite your dish is aimed at. Use pq
tu to highlight the options of choice and press ENTER to start the channel search.
Scan Mode Choose between Default (recommended), Blind Scan and Network
www.strong.tv
7
Channel type Select Free to search Free-To-Air channels only Free + Scrambled to
Service Type Select All to search DTV channels and Radio. Select RADIO to search
It is recommended to use the default settings.
search FTA and Encrypted channels or Scramble to search Encrypted
channels only.
radio channels only or DTV for only Digital TV channels.
3.2 DVB-T/T2 installation
Terrestrial Setting
Press ENTER to start directly searching for digital channels.
Optional you can search also for analogue channels.
Press p and select the Tune Type.
By pressing tu select DTV, ATV or DTV+ATV (DTV to search digital broadcasts and ATV to
search analogue broadcasts).
3.3 DVB-C installation
Cable Setting
Press pq tu to highlight your settings.
Scan type You can select Network Scan, Blind scan or Full.
Network ID The default setting is Auto. To enter your own value press tu and
Frequency The default setting is Auto. To enter your own value press tu and
Symbol Rate The default setting is Auto. To enter your own value press tu and
Optional you can search also for analogue channels.
Press p select the Tune Type.
By pressing tu select DTV, ATV or DTV+ATV (DTV to search digital broadcasts and ATV to
search analogue broadcasts).
enter (with 0 ~ 9) the used Network ID from your provider.
enter (with 0 ~ 9) the main frequency used by your provider in KHz.
enter (with 0 ~ 9) the used Symbol Rate from your provider. (Ks/s) most
used values are 6900 or 6875.
NOTE: Please, check the settings for your cable system used by your
Press ENTER to start searching for digital channels.
provider! Full scan will have a duration of approximately 20 minutes,
depending on your cable network.
4.0 ELECTRONIC PROGRAMME GUIDE (EPG)
EPG stands for Digital Electronic Programme Guide. It is supplied by the programme providers
and offers information on broadcasted programmes. You can access it in digital mode by
pressing EPG on the remote control. Press EPG to bring up the EPG interface. Use pq to select
a channel.
8
www.strong.tv
Press u to switch to overview from one channel EPG. Use DOWN/UP to select event where you
like to know more details. These details are displayed on top of this EPG banner or press INFO
button for full screen. Press EXIT to stop and return to viewing modes.
Then press the COLOUR BUTTONS for entering the required settings.
GREEN Set a reminded to event or set even Timer function.
YELLOW Overview of previous day
BLUE Overview of next day
5.0 MENU SETTINGS
Below items depend if they are available of select input source. Use SOURCE to select other
source. Selections are Satellite, DTV, ATV, AV, PC, SCART, Component, HDMI and Media.
5.1 Menu control (DTV mode)
Press MENU to enter the main menu. Press tu to select an item. Press pq and ENTER to
select the submenus. Press MENU to exit the item.
5.2 Channel
Press MENU to display the main menu. Press tu to select Channel in the main menu. Press
pq to select the option you wish to adjust in the Channel menu.
Press ENTER to adjust. After finish your adjustment, press MENU to save and return to the
previous menu. Below items depend if they are available of select input source. Use SOURCE to
select other source.
5.2.1 Auto Tuning
Press pq to select Auto Tuning. If the TV use DVB-T or DVB-C tuner please refer to chapters 3.2
and 3.3; for Satellite (DVB-S) tuner please refer to chapter 3.1.
English
5.2.2 Dish Setup
If you use Satellite as input source, the Dish Setup menu allow you to set you satellite and
belonging settings as DiSEqC port and LNB type. Afterwards you may start the Auto Tuning or
Manual Tuning by selecting with EPG button the wanted transponder.
5.2.3 DTV Manual Tuning (in DVB-T mode only)
Search and store programmes manually. Press pq to select DTV Manual Tuning. Then press
ENTER to enter the sub-menu.
Press tu to select a Channel No., and then press ENTER to start the search. The search stops
when a programme is found and this programme will be stored in the current channel position.
Press MENU to exit.
5.2.4 ATV Manual Tuning (in DVB-C mode only)
First select the source type of ATV. Then in the Channel menu, select ATV Manual Tuning and
press ENTER to access. Highlight and press pq to select Storage To 1 (maybe other number),
Sound System and Channel No.. Then select search and press ENTER to start the search. Press u
for the unit to search towards higher frequency. Press t for the unit to search towards lower
www.strong.tv
9
frequency. The search stops when a programme is found and this programme will be stored in
the current channel position. If you want to stop the search, press MENU.
Current CH Set the channel number
Colour System Select the colour system (Available: AUTO, PAL, SECAM)
Sound System Select the Sound system
Fine-Tune Adjust the frequency of the channel
Search Start the channel search
5.2.5 Channel extra settings
Programme Edit Edit the programmes. You can press the COLOUR BUTTONS on the
Signal Information Showing the information of current DTV channel. Only available with
Cl information In the case you use an CI Module for decoding encoded channels, this
Logical Channel Numbering LCN
Channel Type Select FTA to search Free-To-Air channels only, or ALL to search FTA and
remote control to skip programmes, rename and delete programmes
or move programmes, and add programmes to the favourite list by
pressing FAV.
DTV signal.
menu shows the internal menu of the card and/or CAM.
This function sort channels automatically to logic order in DVB-T modus
if broadcaster support this function. Press ENTER to select On or Off.
Encrypted channels.
NOTE: If Logical Channel Numbering function is set to ON then sorting of
channels is not possible in normally way.
Logical Channel Numbering and Channel Type functions are not
available when Satellite tuner is selected.
5.3 Picture menu
Picture Mode Select one of the automatic picture control mode. Available choices are
Colour Temperature Select the overall colour tone of the picture. Available choices are Cool,
Noise Reduction Eliminates noise in the picture. Available choices are Off, Low, Middle,
5.3.1 Contrast/Brightness/Colour
If Picture Mode is set to Personal you are able to change the following settings
Press pq to select an option, then press tu to adjust.
Contrast Adjust the highlight intensity of the picture, but the shadow of the
10
Dynamic, Standard, Mild. Select Personal to adjust Contrast, Brightness,
Colour and Sharpness as you like.
Medium, Warm.
High and Default.
picture is invariable.
www.strong.tv
Brightness Adjust the optical fiber output of the entire picture, it will effect the
dark region of the picture.
Colour Adjust the saturation of the colour based on your own preference.
Tint No function
5.3.2 Colour Temperature
In this menu you can change the overall colour cast of the picture.
Press pq to select Colour Temperature, then press ENTER to enter a sub-menu. Press pq to
select the relevant picture effect (DEFAULT: Cold Normal Warm).
Cold lncrease the blue tone for the white.
Normal Increase the neutral colours for the white.
Warm lncrease the red colour for the white.
5.3.3 Noise Reduction
In this menu you can filter out and reduce the image noise and improve picture quality. Press
pq to select Noise Reduction, then press ENTER to enter a sub-menu.
Off Select to turn off video noise detection.
Low Detect and reduce low video noise.
Middle Detect and reduce moderate video noise.
High Detect and reduce enhanced video noise.
Default Set as Default.
5.4 Sound menu
Sound Mode Select your favourite sound mode for each input. Choices are Standard,
Music, Movie, Sports and Personal.
Treble Adjusts the higher frequency of the sound.
Bass Adjusts the lower frequency of the sound.
Balance Control the sound balance between the right and left loudspeaker
(earphone).
Auto Volume Adjust the volume corresponding to the input audio level. Options are
On and Off.
S/PDIF Mode If you have connected S/PDIF output to digital home audio system. You
can select Auto to output Dolby audio automatically. If channel have
this audio channel. Select PCM to output only stereo audio or OFF to
switch output off.
AD Switch Turn on the Audio description, you can activate the setting of AD
volume. When turn on the audio description, a narrator will describe
what is happening on the screen for blind or visually impaired viewers.
(Only if available in DTV mode.)
English
5.5 Time menu
Press MENU to display the main menu. Press t u to select TIME in the main menu. Press p q
to do further adjustments. Press ENTER to confirm or Press MENU to return.
www.strong.tv
11
Clock The time is automatically obtained from the channel transmission and
Time Zone Press p q t u to select Time Zone if you like to change to other zone.
Sleep Timer Press p q to select Sleep Timer. Available Options: Off, 10 min., 20
Auto Standby This function allows you to set the automatic shutdown of your TV.
OSD Timer This function allows you to choose how long the channellist banner is
doesn't have to be set manually.
min., 30 min., 60 min., 90min., 120 min.,180 min. and 240 min..
Choose between 3H, 4H, 5H or Off to disable this function.
displayed. Choose between 5s, 15s or 30s.
5.6 Lock
Press MENU to display the main menu. Press t u to enter the Lock menu settings. To enable
enter the PIN code (default:0000). Press p q to select the options. The following options are
available:
System Lock This option allows you to enable or disable the password protection.
Set Password The default password is 0000, to customize the password press ENTER
Channel Lock This option allows you to prevent viewing of one or more channels.
Parental Guidance Press ENTER to enter and set the age for suitable programmes for
Key Lock This option allows you to Lock the TV buttons. Press tu to select Off
Hotel Mode Press pq to set Hotel mode. Confirm with ENTER. It is possible to
Press ENTER then Pin code to set this function On or Off.
and follow the instruction within the menu.
Press ENTER to display the channel list and select with pq the
channel you want to be locked. Press GREEN to lock it. Consider the
same procedure to lock other channels if needed.
children, then press pq.
or On to lock.
enable or disable this function by setting On or Off using tu or
ENTER.
NOTE: When Hotel Mode is available, the TV react following the settings
Options contained in the HOTEL MODE menu:
Hotel Mode To enable or disable this function by setting On or Off using tu or
Source Lock This option allow to enable or disable the sources available: Satellite,
Default Source Here is possible to select the source that will be displayed every time
12
enabled of disabled contained in the menu
ENTER.
DTV, ATV, AV, PC, SCART, Component, HDMI and Media. Press ENTER to
access the source list and pq to select the sources. Press ENTER to
enable or disable one or more. Please note that it is necessary to keep
more than 1 source un-Locked. Press MENU to back to the previous
menu.
that the TV is turned on. Press ENTER to access the sources list, and
www.strong.tv
select one of them by pressing ENTER. Press MENU to back to the
previous menu.
Default Prog Here it is possible to select the channel that will be displayed when
the TV is turned on. The program are available only when the source
selected in Default Source contain channels and it is selected in view
mode. Use tu to set a channel of your choice.
Default Volume This option allows to set the default volume when the TV is turned on.
Press ENTER to display the volume bar, use tu to adjust the volume.
Press MENU to back to the previous menu.
Max Volume To set the Max volume press ENTER to display the volume bar, use tu
to adjust the volume. Press MENU to back to the previous menu.
Import Database Press ENTER to Import the Database from a compatible TV.
Export Database Press ENTER to Export the Database to a compatible TV.
Clear Lock Press ENTER to reset all functions set in this menu.
English
NOTE: For the Import Database and Export Database functions you need to
connect a USB device formatted in FAT32.
5.7 Setup Menu
Language Select the Menu language of your choice. The default setting is English.
TXT Languages Press pq t u to select correct character type belong to language to
Audio Languages Press tu to select Primary for main audio track or Secondary next
Subtitle Language Press pq tu to select your chosen Subtitle Language, then
Hearing Impaired If you like to have extra subtitles support then select this function to
Aspect Ratio Change in this option the picture format from displayed video on the
Blue Screen If you select a input with no signal and like to have Blue colour screen
First Time Installation This option allows you to perform the First Installation again. The
Reset Restore Factory Default
Software Update (USB) If a new software release for this model is available on our website
Press pq to select the menu language.
display correct the TXT. Selection are: West, East, Russian, Arabic or
Farsi.
audio channel if first is not available. Press pq t u to select your
chosen Audio Language, then press ENTER.
pressENTER to select.
On.
screen. PressENTER to select. Auto, 16:9, 4:3, Zoom 1, Zoom 2.
instead black. Select this function to On.
complete description is available on chapter 3.
Press pq to select this function, by pressing ENTER. You will reset
all the settings contained in the main menu and deleted all installed
channels. TV will go back to First Time Installation. See chapter 3.
and you have copied the unzipped file to an empty USB device,
formatted in FAT32, you can upgrade the system software of this TV.
www.strong.tv
13
After successfully update a message appears on screen. Power off by
removing the main power connector. Remove USB device and power
ON.
NOTE: NEVER disconnect the USB device from the TV, the TV from the main
Environment Home /Shop Switch between Home modes and Shop modes with default
HDMI CEC See next chapter 5.7.1.
or switch OFF power during the update procedure. It can damage
your device and warranty will void!
more brightness and Auto standby to off.
5.7.1 HDMI CEC
CEC Control Select this item and Press ENTER. Press t u to turn the HDMI CEC On
Audio Receiver Press t u to turn the Audio Receiver On or Off.
Device Auto Power Off Press t u to turn on this feature. When finished turn off your TV. The
TV Auto Power On Press t u to select this option. When finished, turn on the connected
Device List Press OK to open the main menu of device.
Device Menu Access the device menu.
or Off.
connected device will turn off automatically.
device. The TV will switch on automatically.
6.0 MEDIA
6.1 Reminder when using the USB player
1. Some USB storage devices may not be compatible to operate smoothly with this TV.
2. Back up all of the data in the USB storage device in case data is lost due to an
unexpected accident. STRONG does not assume any liability for the losses by misuse or
malfunction. Data backup is consumer's responsibility.
3. For large file sizes, the loading speed may be slightly longer.
4. The recognition speed of a USB storage device may depend on each device.
5. When connecting or disconnecting the USB storage device, make sure the TV is not in
USB mode otherwise the USB storage device or the files stored in it may be damaged.
6. Please use only a USB storage device which is formatted in FAT16, FAT32, NTFS
(playback only) file system provided with the Windows operating system. In case of a
storage device formatted as a different utility programme which is not supported by
Windows, it may not be recognized.
7. For Software Updates and Database functions it is recommended to use USB-Sticks
(keys) in FAT16 or.32.
8. When using a USB Hard Disk Drive which is not powered independently, ensure its
power does not exceed 500 mA. Otherwise the TV system will change into standby
mode, and you must pull out the USB Hard Disk and restart the TV system.
9. An “Unsupported File” message will be displayed if the file format is unsupported or
the file is corrupted.
14
www.strong.tv
10. FHD big picture needs longer time to process, which is not caused by the TV. Please be
patient.
11. This TV may not support some multimedia files changed and upgraded as the change of
the encoding format or other technical aspects advances.
12. Please refer to chapter 9. Appendix for a list of supported file formats for USB
playback.
6.2 USB menu
Press SOURCE and select Media. You can view movie, music and photo files from your USB
storage devices. Connect a USB storage device to the USB input terminal and select the types
of media on the home page: Movie, Music, Photo and text. Press ENTER, the screen will show
the connected USB device, press ENTER again to view the file folders and files. Press pq or
tu to select a folder, press ENTER to open the folder and select the files. Highlight the one
you want to play or watch or press directly u2 to start playing directly. Press 3 to stop playing
and return to upper lever folder. Continuously press RETURN to go back to upper level folder.
Repeat again to select and play another media type.
English
NOTE: By choosing one of the three media types, for example Movie, the
folders inside will display only video files and no other formats.
6.2.1 Play movies
Fig.6
During playback, press INFO or ENTER to display/exit the menu bar (Fig.6). Press the USB
control buttons on the remote control to do relevant operations.
Play & Pause/Stop/Prev./Next
Fast Reverse/Fast Forward
Play Mode Highlight the corresponding icon and pressENTER to switch to another
Information Highlight the corresponding icon and press ENTER to view the
Aspect Ratio Highlight the button and press ENTER to select the display mode.
Press u2 to play or pause the playback. Press 3 to stop playing. Press
7 8 to play the previous or the next video file. Press INFO and use
tu to highlight the corresponding icon on the control bar, then press
ENTER. The TV will response accordingly.
Press and hold 5 6 for seconds to draw the playing progress as your
desire, then press u2 to start the playing from the new position.
play mode.
information of the playing video.
6.2.2 Play music
Fig.7
Press INFO or ENTER to display/exit from the menu bar (Fig.7). Press the USB control buttons
on the remote control to do relevant operations.
Play & Pause/Stop/Previous/Next
Press u2 to play or pause the playback. Press 3 to stop playing. Press
7 8 to play the previous or the next music file. Press tu to highlight
www.strong.tv
15
the corresponding icon on the control bar, and then pressENTER. The
TV will response accordingly.
Fast Forward/Fast Reverse
Press and hold 5 6 for seconds to draw the playing progress as you
wish, then press u2 on the remote control to start playing from the
new position.
Repeat Highlight the icon and pressENTER. You can select 3 different modes:
None to disable the function, 1 to repeat one track only and All to
repeat the entire list once it is finished.
Information Highlight the icon and press ENTER to check the information of the
playing music.
NOTE:
If one (or more) file(s) of the play list is selected, the buttons 7 8
will play only selected files.
This menu only shows supported files.
Files with other file extensions are not displayed, even if they are
saved on the same USB storage device.
An over-modulated mp3 file may cause some sound distortion
during playback.
This TV supports lyrics display (in English). The maximum number of
characters per line is 48.
The file name of music and lyrics must be the same in order to
display lyrics while the music is playing.
If you want to show the associated lyrics on the screen with the
music, you must store these in the same folder using the same file
name with “.Irc” file extensions.
6.2.3 Browse photos
Fig.8
Press during viewing INFO or ENTER to display/exit from the menu bar (Fig.8). Press the USB
control buttons on the remote control to do relevant operations.
Play & Pause/Stop/Previous/Next
Repeat Highlight the icon and press ENTER. You can select 3 different modes:
Info Highlight the button and press ENTER to check the information of the
Rotate Highlight the icon in the menu bar and press ENTER to rotate the
Zoom In/Zoom Out Highlight the icon on the menu bar and press ENTER to zoom in or
Press u2 to play or pause the playback. Press 3 to stop playing. Press
7 8 to show the previous or the next picture. Press tu to highlight
the icon on the control bar, and then pressENTER. The TV will response
accordingly.
None to disable the function, 1 to repeat one track only and All to
repeat the entire list once it is finished.
shown photo.
picture 90 degrees clockwise or counter clockwise.
zoom out of the image.
16
www.strong.tv
Move View When the image is magnified, use this function for convenient check.
Highlight this icon, press ENTER, then press tupq to move the
image.
English
NOTE: The move function
is only available when the image is enlarged.
6.2.4 Browse text documents
Press tu to select Text in the main menu. Then press tu to select the drive disk you choose
to watch and ENTER to enter. Select the file you want to display by using pq tu and confirm
with OK. Quit step by pressing ENTER. Press tu to select return and go back to previous
menu.
6.2.5 Software update via USB
From time to time you can check if there is an improved software version available. This can be
viewed and downloaded from our website www.strong.tv. Search the model number on our
website's service support section. If there is an improved software version you can download
the file and copy it to the root of a USB device. Then press pq button to select Software
Update (USB) from the SETUP menu on your TV. Afterwards plug your USB device into the USB
slot and pressENTER to update the respective software. Confirm with Yes using tu. When the
update is completed, remove the USB stick, disconnect your device from the main power supply
and plug in again.
7.0 TROUBLESHOOTING
There maybe various reasons for abnormal operation of your TV set. Check your TV set
according to the general procedures shown below. Additionally, we strongly recommend
reading the detailed troubleshooting of your TV set in the full user manual available on our
website www.strong.tv. If your TV set does not work properly after checking the general and
detailed troubleshooting, please contact your dealer, the local Service Hotline, or send an email
to our support via www.strong.tv. DO NOT try to open or disassemble your TV set. It may cause
a dangerous situation and the warranty will be void.
Problem Possible cause and solution
The LED/Standby indicator
does not light up
1. Check whether the power connector is completely
plugged at the TV and into power socket.
2. Make sure that the switch on multipoint connectors is
switched ON as well.
3. The electrical outlet may be damaged.
4. STBY LED is defective.
www.strong.tv
17
Problem Possible cause and solution
No Signal 1. The TV is not connected to a signal source (DVB-C,
DVB-S/S2 or DVB-T/T2) or the antenna (terrestrial
or satellite antenna) is maybe not aligned correctly
respectively the according connection and distribution
equipment might show malfunction, incompatibility or
defectives.
2. DVB-T/T2: Active antennas need antenna power switched
ON or external power connected.
Antenna is maybe out of digital signal reception in your area.
Check reference from service providers about coverage.
3. DVB-S/S2: Incorrect values of some tuner parameters
(e.g. one or some channel(s) changed to another
transponder or are no longer emitted).
Incorrect values of LNB parameters.
The picture and sound
remain frozen, or macro
blocks or similar distortion
are visible on the screen.
DVB-S/S2,DVB-T/T2: The reception signal is too weak or
disturbed by electromagnetic, high-frequency, or other
interference signals. DVB-T/T2 : Disturbances caused by signal
reflections.
DVB-C, DVB-S/S2: The connection cables at the signal source are
too long (too high attenuation).
DVB-T/T2, DVB-S/S2: The antenna is not properly adjusted or got
misaligned after storm etc.
Any other reception or
signal related problems
1. Generally cables might have loosened. Moisture might
have entered into cables or connectors.There is heavy
rain or heavy storm at present (DVB-S/S2 and -T/T2).
Check the cable connections. DVB-S/S2 and -T/T2: Check
all equipment connected between the reception point
and the TV.
2. Wait until heavy rain/thunderstorm passed. If no solution
ask a local satellite specialist for advice.
DVB-S/S2: The satellite dish is NOT aligned to the (correct)
satellite(s). Ask a local satellite specialist for advice.
3. DVB-S/S2: Satellite dish is too small. Trees or buildings
are in path. Ask a local satellite specialist for advice.
4. DVB-S/S2: Signal is too strong, maybe need to be
atennuated. Ask a local satellite specialist for advice.
No colour 1. Devices are not properly connected (scart, RCA sockets)
or wrong/bad cables are used.
2. Adjust the saturation.
3. Switch TV on another channel. It is possible that the
current programme is broadcast in black and white.
No picture, normal sound 1. Adjust the brightness and contrast
2. Radio channel is tuned to or the programme is not
transmitting Video signals or another broadcasing
interference/failure.
18
www.strong.tv
Problem Possible cause and solution
Normal picture, no sound 1. Press the volume up button to increase the volume level.
Playback of video is
causing picture freeze/
macro blocks or similar
distortion, especially on
HD content.
The remote control does
not work
The TV switches off after a
certain time
2. Audio is muted, press ! to restore the sound.
3. If external devices are used to loop the sound through,
make sure to select correct sources and correct sound
mode, for details also check advices in User Manuals
from connected devices
4. Maybe a channel w/o audio is tuned to (demo) or the
programme is not transmitting audio signals or there is
some other transmission interference/failure.
Read/write speed of your USB device could be too low. Make
sure to use a USB storage device with sufficient speed and space.
Pen drives (USB sticks) may not support sufficient speed.
1. hange the batteries. If you're using rechargable ones
take care to use such with low self-discharge
2. The batteries are not installed correctly or the types
have been mixed
3. IR Sensor is blocked or maybe interfered from bright
light
Switch ON the TV and check settings for automatic STBY
function, by default the TV switches OFF after 4 hours to fulfil
European low power regulations and help you to save energy.
English
NOTE: If the problem persists after these solutions, please contact your local
support centre or send a support mail via our website www.strong.tv.
8.0 SPECIFICATIONS
Audio
Audio Output: 10 W + 10 W
Video
DVB-T: Reception range: VHF (50MHz ~ 230MHz),
UHF (474MHz ~ 862MHz)
Input impedance: 75Ω
Channel Bandwidth: 7MHz/8MHz
Modulation: DVB-T: COFDM 2K/8K
QPSK,16QAM,64QAM
DVB-S/S2: QPSK ,8PSK
DVB-T2: QPSK,16QAM,64QAM,256QAM
DVB-C: 16QAM, 32QAM, 64QAM, 128QAM, 256QAM
Video System: MPEG-2 MP@ML, MPEG-2 MP@HL, H.2
Main/Main 10 profile, @L4.1, Support 8-bit/10-bit color depth,
1920x1080@60fps
www.strong.tv
19
Sound System: MPEG-1 layer 1/2
System: DTV: DVB-T2, DVB-S2, DVB-C, DVB-T, DVB-S
ATV: PAL/SECAM/ NTSC
AV: PAL, NTSC
Connectors
1x ANT/CABLE IN
2x HDMI 2.0
1x HDMI 2.0 (ARC)
1x SCART
2x USB
1x S/PDIF (coax.)
1x AV IN
1x COMMONINTERFACE (CI)
1x Mini YPbPr 1x Headphones
General Data
Operating voltage: 110 ~ 240 V AC 50/60 Hz
Power consumption: max. 60 W, typ. 41 W
Power consumption in standby: <0.5 W
Operating temperature: -20 °C ~ +60 °C
Storage temperature: -15 °C ~ +45 °C
Operating humidity: 0% ~ 89% RH, non-condensing
Storage humidity: 0% ~ 85% RH, non-condensing
Dimensions (WxHxD) in mm: 729.9 x 83.1 x 426.7 mm
Net-weight: 3.7 kg
20
www.strong.tv
Loading...