
CHARON
CHARON----PDP
CHARONCHARON
Product version: 4.3 Build 144-04
Description
Description
DescriptionDescription
CHARON-PDP is a member of CHARON-VAX crossplatform hardware virtualization family of products by
Stromasys.
11/94 systems by its virtual equivalent running on a
standard computer system. CHARON-PDP creates the
virtual replica of the original PDP-11 hardware, allowing
the RT-11, RSX-11, RSTS, and other operating systems
and all software that is running in that environment to remain working as always in their existing, binary form. No
or minor changes to the original software (operating system, layered products or applications), its procedures or
handling have to be applied.
Network
Network
NetworkNetwork
CHARON-PDP virtualizes the Ethernet controllers present
in the original PDP hardware. Any protocol that ran on
these controllers (DECnet, LAT) will run over virtualized
link.
Storage
Storage
StorageStorage
CHARON-PDP provides support for (T)MSCP storage
devices. CHARON translates all these PDP types to any
modern technology (SCSI, IDE, SATA, SAS or SAN) by
means of logical files in a Windows directory or physical
LUNs attached locally or remotely by iSCSI or SAN.
Host system requirements
Host system requirements
Host system requirementsHost system requirements
A physical system or virtual VMware appliance running on
Windows 7 Professional or Ultimate Edition host system
(32 or 64 bit version), with a dual CPU of at least 2 GHz,
one dedicated Ethernet adapter, a USB port for the license key and enough disk space to keep the PDP disks.
CHARON-PDP requires a minimum of 2 GB host memory.
The CHARON-PDP device drivers for external PCI to
QBUS adapter and for FPGA Cesys board, and other serial line interfaces require 32bit Windows version and
cannot be used on 64bit Windows. Those devices also
cannot be used on VMware.
Perform
Performance
PerformPerform
CHARON-PDP provides options to fine tune the virtual
PDP performance by setting the emulated PDP-11 CPU
frequency and defining individual PDP CPU instructions
timings. Please refer to the user manual for details.
CHARON A
CHARON Application
CHARON ACHARON A
CHAPI is an open API to emulated QBUS bus, thus available for QBUS based emulators. It allows creation of emulated QBUS devices, and connects emulated peripherals
which are designed as external C++ modules to the emulator kernel. CHAPI library functions provide standard device elements like registers, interrupt logic, etc.
ance
anceance
PDP for Windows
PDPPDP
It is designed to replace PDP-11/93 and PDP-
pplication PPPProgram
pplication pplication
for Windows
for Windowsfor Windows
rogram IIIInterface
rogram rogram
nterface (CHAPI)
nterface nterface
(CHAPI)
(CHAPI)(CHAPI)
Document: 30-15-062-002
Product license key
Product license key
Product license keyProduct license key
The HASP USB license key should be permanently connected to the host system. It preserves the customer specific license parameters, allows remote electronic updates
and enables rapid change of host systems as the CHARON executable itself can be installed on multiple systems.
HASP allows running multiple CHARON-PDP, CHARONVAX, and CHARON-AXP instances on a single host computer.
Distribution kit
Distribution kits available for download
Distribution kitDistribution kit
direct customer login
direct customer login from Stromasys ftp:
direct customer login direct customer login
• CHARON Installation kits
• Release notes
• User manuals
• Software Product Descriptions
• Patches
CHARON
CHARON utilities
CHARONCHARON
• HASP_View
HASP_View: view CHARON license content
HASP_ViewHASP_View
• HASPRUS
HASPRUS: update CHARON license
HASPRUSHASPRUS
• Network Control Center:
Network Control Center: manage CHARON network
Network Control Center:Network Control Center:
drivers and settings
• SCSIcheck:
SCSIcheck: define configuration for directly connected
SCSIcheck:SCSIcheck:
SCSI devices
• MKdisk:
MKdisk: create empty VAX disk images
MKdisk:MKdisk:
• MTD:
MTD: transfer the data between physical tape and
MTD:MTD:
CHARON tape container file
• CHARON
CHARON Launcher:
CHARONCHARON
setup CHARON services
• Service Manager:
Service Manager: manage CHARON instances as
Service Manager:Service Manager:
services
• HOSTprint:
HOSTprint: redirect virtual parallel port (LPV11) to a
HOSTprint:HOSTprint:
Windows local or network printer (applicable to QBUS
based CHARON systems only).
• Web based User Interface:
Web based User Interface: CHARON-PDP instances
Web based User Interface:Web based User Interface:
could be started, stopped, and configured using a local or remote web browser.
s available for download through partner or
s available for download s available for download
from Stromasys ftp:
from Stromasys ftp:from Stromasys ftp:
utilities
utilitiesutilities
through partner or
through partner or through partner or
Launcher: start/stop/configure CHARON,
Launcher:Launcher:
[Type text]

PRESERVING YOUR SOFTWARE INVESTMENT ACROSS HARDWARE GENERATIONS!
Email: info@stromasys.com
User environment
User environmentUser environment
User environment
Virtualized hardware
Virtualized hardwareVirtualized hardware
Virtualized hardware
Container files; Local, iSCSI and SAN partitions;
Container files, Windows tape drives, physical SCSI tape drives
1 QBUS Ethernet controller
Asynchronous Serial Lines
UART (console), DHV11, DLV11(
UART (console), DHU11, DL11
Connection to physical peripherals
Physical QBUS (additional
Microsoft Windows 7 and Windows XP (32 bit and 64 bit)
At least dual core system, 2GHz or more. At least 2GB RAM
Standard industry hardware with PCI slots available on the motherboard
After installation the system will behave like the PDP it replaces and should be treated like that PDP. Operating procedures will be the same and we advise not to treat it as a Windows system, despite the fact it
runs on a Windows kernel. The product documentation includes an advisory for switching off unused Windows services and the Windows kernel can be disconnected from the network after installation.
hardware is required) 3)
on top of a physical host or on VMware ESXi 4.1 update 1 or ESXi 5.0.
Some peripheral devices require hosting OS to be 32 bit Windows.
1)
Configurable QBUS components are the MSCP disk controller RQDX3, the TMSCP tape controller TQK50, the serial line control-
lers as above and the Ethernet controllers DEQNA, DELQA and DESQA.
2)
Configurable UNIBUS components are the MSCP disk controller UDA50, the TMSCP tape controller TUK50, the serial line con-
trollers as above and the Ethernet controllers DEUNA and DELUA.
3)
QBUS basket hardware (original VAX QBUS basket or custom 3rd party custom QBUS basket) and PCI to QBUS hardware and
software interface are required. Please contact Stromasys for details
Each virtual PDP model follows the characteristics of its PDP hardware equivalent, requiring the corresponding level of
license units and supports the peripherals particular to that PDP model. The virtual PDP does not include delays to
simulate mechanical device behavior, diagnostic, and maintenance modes.
STROMASYS SA
Headquarters
Ch. du Pont-du-Centenaire 109
1228 Plan-les-Ouates
Switzerland
STROMASYS ASIA PACIFIC LTD
Asia Pacific Region
2/F Eton Tower, 8 Hysan Avenue
Causeway Bay
Hong Kong
STROMASYS INC
Americas Region
3801 Lake Boone Trail, Suite 410
Raleigh, NC 27607
United States of America
STROMASYS EMEA
Europe, Middle East & Africa
Ch. du Pont-du-Centenaire 109
1228 Plan-les-Ouates
Switzerland