Streamline Supplies 50GPD-FP-CLK, 100GPD-FP-CLK, 75GPD-FP-CLK Instruction Manual

STREAMLINE

®

Products for the Pure Water Cleaning Industry

INSTRUCTION MANUAL

PRODUCT

FILTERPLUS ®CLK

50, 75 & 100GPD Pumped RO Water Filtration
Systems.

PRODUCT CODE

50GPD-FP-CLK, 75GPD-FP-CLK,
100GPD-FP-CLK

WARRANTY

Covered for one year from
recorded date of purchase.

(See back page for further details)

Packed By_________ Checked By_________

Date ____/____/____

The

STREAMLINE

® water filtration system is designed to de-ionise

tap water and is simple to install and maintain.

It is the installer’s responsibility to ensure that this appliance is
plumbed in accordance with local authority’s bye-law regulations.

THIS KIT INCLUDES

1 x Filtration System
1 x Tap Valve
1 x Waste Saddle Clamp
5m x White Tube
(No faucet included)

SET UP INSTRUCTIONS

The system should be positioned near to a 15mm mains water
supply and a 40mm waste outlet. Fix the filtration system in the
desired location though the holes on the metal base plate (screws
not included). Position the holding tank in close proximity. Re­move the wrapping from the pre-filter cartridges and click them
into place.

Remove wrapping from RO Membrane. Remove the RO feed tube
from the housing cap by undoing the nut. Unscrew the housing
cap and insert the RO membrane (See Fig 2) Replace the housing
cap, but leave the feed tube unscrewed to allow filter fines to be
flushed out once the system is plumbed in.

FIG. 2

RO MEMBRANE

HOUSING CAP

RO FEED
TUBE

WATER INLET