Streamline R5500WHCH, R5500CHGLD, R5500CHCH, R5501CHCH, R5500GLDGLD Installation Manual

Owner’s Manual & Installation Guide

Clawfoot Bathtub

Please read all instruct ions carefully before proceeding with installation.
Due to the complexi ty of the installation pro cedure a professional pl umber is required.
Specifications and directions may change without notice.

Table of Contents:

1. Installation Guide Applicable Bathtub Models………………. 1

2. External Drain Configuration………………………………….. 2

3. External Drain and Overflow Installation…………………….. 3

4. Claw foot Configuration, Installation, Replacement………… 4

5. Bathtub Installation...…………………………………………… 6

6. Product Care and Maintenance……..………………………… 7

1

Drain Model A-DWF-GLD and A-DWF-CH are used with below models.

R-5000-69CICFRD-FM R-5001-69CICFWH-FM R-5020-72CICFWH-FM R-5060-67CICFPR-FM

R-5061-67CICFWH-FM R-5100-66CICFWH-FM R-5101-48CICFWH-FM R-5120-60CICFWH-FM

R-5160-72CICFRD-FM R-5161-61CICFRD-FM R-5162-72CICFWH-FM R-5163-61CICFWH-FM

R-5220-67CICFWH-FM R-5221-61CICFWH-FM R-5240-71CICFWH-FM R-5280-66CICFRD-FM

R-5281-66CICFWH-FM R-5420-67CICFWH-FM R-5440-65CICFGR-FM R-5441-65CICFRD-FM

R-5442-65CICFWH-FM R-5460-53CICFWH-FM

2

3

1. Connect Drain Strainer & Drain Ell. Use silicone sealant. DO NOT use plumbers putty to seal.

2. Insert tailpiece into trap inlet. The tail piece may need to be cut for proper fit, 1" - 2" of the
tailpiece should fit inside the trap. Slip the flange over the tail piece and slide down to floor.

3. Assemble tee section to tailpiece, overflow ell and drain ell using coupling nuts and O-rings
that are provided.

4. Attach the tapered rubber gasket to the overflow ell. Align the overflow ell with the overflow
hole and secure drain to the tub with overflow plate and screw provided.

5. Make sure a watertight seal exists on all bath drain connections.